- 18 2月, 2016 19 次提交
-
-
由 Catherine Sullivan 提交于
Bump. Change-ID: Ie280dc67e37a1cf667c3469499a4fb90f4177b75 Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Anjali Singhai Jain 提交于
In MFP mode particularly when we were setting the PF VSI in limited promiscuous, the HW switch was still mirroring the outgoing packets from other VSIs (VF/VMdq) onto the PF VSI. With this new bit set, the mirroring doesn't happen any more and so we are in limited promiscuous on the PF VSI in MFP which is similar to defport. An API check is not required, since this bit is reserved for FW API version < 1.5 Also update copyright year in file headers. Change-ID: I9840cb95f11dde733d943cb03ce84f68b9611bc8 Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
In one obscure corner case, it was possible to clear the NVM update wait flag when no update_done message was actually received. This patch cleans the event descriptor before use, and moves the opcode check to where it won't get done if there was no event to clean. Also update copyright year in file headers. Change-ID: I68bbc41965e93f4adf07cbe98b9dfd63d41509a4 Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mitch Williams 提交于
If a reset fails to complete, the driver gets its affairs in order and awaits the cold solace of rmmod. Unfortunately, it was not properly setting the adapter state, which would cause a panic on rmmod, instead of the desired surcease. Set the adapter state to DOWN in this case, and avoid a panic. Change-ID: I6fdd9906da52e023f8dc744f7da44b5d95278ca9 Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mitch Williams 提交于
In the case where we have a page fully used by receive data, we need to release the page fully to the stack. Instead of calling get_page (which increments the page count) followed by free_page (which decrements the page count), just donate our reference to the stack. Although this donation is not tax deductible, it does allow us to avoid two very expensive atomic operations that reverse each other. Change-ID: If70739792d5748995fc175ec92ac2171ed4ad8fc Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Anjali Singhai Jain 提交于
This patch adds a workaround for cases where we might have interrupts that got lost but WB happened. If that happens without this patch we will see a tx_timeout. To work around it, this patch goes ahead and reschedules NAPI in that situation, if NAPI is not already scheduled. We also add a counter in ethtool to keep track of when we detect a case of tx_lost_interrupt. Note: napi_reschedule() can be safely called from process/service_task context and is done in other drivers as well without an issue. Change-ID: I00f98f1ce3774524d9421227652bef20fcbd0d20 Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mitch Williams 提交于
Support packet split receive on VFs. This is off by default but can be enabled using ethtool private flags. Because we need to trigger a reset from outside of i40evf_main.c, create a new function to do so, and export it. Also update copyright year in file headers. Change-ID: I721aa5d70113d3d6d94102e5f31526f6fc57cbbb Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jesse Brandeburg 提交于
Bump version to i40e-1.4.13 and i40evf-1.4.9 Change-ID: I9db37f9d4899141c3e5455dfb456d45465b8c035 Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mitch Williams 提交于
Get rid of the unused hsplit field in the ring struct and use the existing macro to detect packet split enablement. This allows debugfs dumps of the VSI to properly show which Rx routine is in use. Change-ID: Ic4e9589e6a788ab196ed0850703f704e30c03781 Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mitch Williams 提交于
Mr. Spock would certainly raise an eyebrow to see us using bitwise operators, when we should clearly be relying on logic. Fascinating. Change-ID: Ie338010c016f93e9faa2002c07c90b15134b7477 Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mitch Williams 提交于
Refactor the packet split Rx code to properly use half-pages for receives. The previous code was doing way more mapping and unmapping than it needed to, and wasn't properly using half-pages. Increment the page use count each time we give a half-page to an skb, knowing that the stack will probably process and release the page before we need it again. Only free and reallocate pages if the count shows that both half-pages are in use. Add counters to track reallocations and page reuse. Change-ID: I534b299196036b64be82b4861a0a4036310a8f22 Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jesse Brandeburg 提交于
The i40e and i40evf drivers now cleanly handle allocation failures and can avoid kernel log spew from the memory allocator when allocations fail, so set __GFP_NOWARN on Rx buffer alloc. Change-ID: Ic9e1b83c495e2a3ef6b069ba7fb6e52ce134cd23 Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jesse Brandeburg 提交于
This is the "Don't Give Up" patch. Previously the driver could fail an allocation, and then possibly stall a queue forever, by never coming back to continue receiving or allocating buffers. With this patch, the driver will keep polling trying to allocate receive buffers until it succeeds. This should keep all receive queues running even in the face of memory pressure. Also update copyright year in file header. Change-ID: I2b103d1ce95b9831288a7222c3343ffa1988b81b Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jesse Brandeburg 提交于
While re-enabling interrupts the driver would clear all pending causes. This meant that if an interrupt was generated while the driver was cleaning or polling with interrupts disabled, then that interrupt was lost. This could cause a queue to become dead, especially for receive. Refactored the enable_icr0 function in order to allow it to be decided by the caller whether the CLEARPBA (clear pending events) bit will be set while re-enabling the interrupt. Also update copyright year in file headers. Change-ID: Ic1db100a05e13c98919057696db147a258ca365a Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Catherine Sullivan 提交于
Change the driver string to 40-10 Gigabit instead of XL710/X710 for X722 and all future products. Also update copyright year in file header. Change-ID: I57fae656b36dc4eb682b2b7a054f8f48f3589149 Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Anjali Singhai Jain 提交于
Now that the Force-WriteBack functionality in X710/XL710 devices has been moved out of the clean routine and into the service task, we need to make sure WriteBack-On-ITR is separated out since it is still called from clean. In the X722 devices, Force-WriteBack implies WriteBack-On-ITR but without the interrupt, which put the driver into a missed interrupt scenario and a potential tx-timeout report. With this patch, we break the two functions out, and call the appropriate ones at the right place. This will avoid creating missed interrupt like scenarios for X722 devices. Also update copyright year in file headers. Change-ID: Iacbde39f95f332f82be8736864675052c3583a40 Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jesse Brandeburg 提交于
Bump driver versions to i40e-1.4.12 and i40evf-1.4.8 Change-ID: I0ad82668c4ded04250391fda396ce191a42ab754 Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
Don't bother trying to set up a TSO if the skb->ip_summed is not set to CHECKSUM_PARTIAL. Change-ID: I6495b3568e404907a2965b48cf3e2effa7c9ab55 Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jesse Brandeburg 提交于
Driver was using an offset based off a DMA handle while mapping and unmapping using sync_single_range_for[cpu|device], where it should be using DMA handle (returned from alloc_coherent) and the offset of the memory to be sync'd. Change-ID: I208256565b1595ff0e9171ab852de06b997917c6 Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: NNelson, Shannon <shannon.nelson@intel.com> Reviewed-by: NWilliams, Mitch A <mitch.a.williams@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 17 2月, 2016 8 次提交
-
-
由 Catherine Sullivan 提交于
Bump. Change-ID: I21aa520a3c8c5f4f562a98019bf8b76b3706c480 Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mitch Williams 提交于
If the VF is reset via VFLR, the device will be knocked out of bus master mode, and the driver will fail to recover from the reset. Fix this by enabling bus mastering after every reset. In a non-VFLR case, the bus master bit will not be disabled, and this call will have no effect. Change-ID: Id515859ac7a691db478222228add6d149e96801a Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Anjali Singhai Jain 提交于
We were not doing write-back on interrupt throttle for Legacy case in X722. This patch fixes that, so we do WB_ON_ITR for Legacy as well. Plus the issue that we should still be setting NO_ITR if we are touching the DYN_CTLN register since we do not want to change ITR setting here. Change-ID: I5db8491ee1544118a389db839cecc93e1bbc480e Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
Bump AQ minor version to 1.5 for new FW features. Change-ID: I5a790f7f519a2a8921aaa1c5663727dd1897ffec Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Acked-by: NKevin Scott <kevin.c.scott@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
Add the new AQ command and struct for managing a thermal sensor. Change-ID: I6f5631839a0f3dca352a6c222f1269a960e2310a Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
Add the new Cisco VXLAN-GPE cloud tunnel type for the Add Cloud Filter and UDP tunnel AQ commands. Change-ID: I2c093c7d79726c7fca08a36e5c63581a905da3d2 Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Acked-by: NKevin Scott <kevin.c.scott@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
Add the new Set Switch Config AdminQ command, and mark the L2 Filter bit as deprecated in the Add VEB command. Change-ID: I5b24790f14c56f0ddf3f70df1e486844146b039f Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Acked-by: NKevin Scott <kevin.c.scott@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
Add flags to MAC allocation requests to signify that the MAC VLAN filters should come from the shared resource pool rather than the dedicated PF resource pools. Change-ID: I4c2da64c01856edcb0982bc4aab75c5a91047a7a Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Acked-by: NKevin Scott <kevin.c.scott@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 04 2月, 2016 11 次提交
-
-
由 Shannon Nelson 提交于
Add the new External Device Power Ability field to the get_link_status data structure, using space from the reserved field at the end of the struct. Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Acked-by: NKevin Scott <kevin.c.scott@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
Fix the name of the new cloud tunnel type from the place-holder NGE name to the official Geneve. Also fix the spelling of the VXLAN type. Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Acked-by: NKevin Scott <kevin.c.scott@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
-
由 Shannon Nelson 提交于
Add the AQ opcode and struct definitions for the Run PHY Activity command Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Acked-by: NKevin Scott <kevin.c.scott@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
Add the new proxy-wake-on-lan capability bit available with the new X722 device. Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Acked-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jesse Brandeburg 提交于
As done per ixgbe, use a private workqueue to avoid blocking the system workqueue. This avoids some strange side effects when some other entity is depending on the system work queue. Change-ID: Ic8ba08f5b03696cf638b21afd25fbae7738d55ee Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Anjali Singhai Jain 提交于
Add write-back on interrupt throttle rate timer expiration support for the i40evf driver, when running on X722 devices. Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Anjali Singhai Jain 提交于
The PCTYPES for the X710 and X722 families are different. This patch makes adjustments for that. Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mitch Williams 提交于
Since we check these ring pointers to make sure we don't double-allocate or double-free the rings, we had better null them out after we free them. In very rare cases this can cause a panic if the driver is removed during reset recovery. Change-ID: Ib06eb4910a3058275c8f7ec5ef7f45baa4674f96 Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
The device capabilities were defined in two places, and neither had all the definitions. It really belongs with the AQ API definition, so this patch removes the other set of definitions and fills out the missing item. Change-ID: I273ba7d79a476cd11d2e0ca5825fec1716740de2 Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Acked-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mitch Williams 提交于
In some modes, bonding would not enslave VF interfaces. This is due to bonding calling change_mtu and the immediately calling open. Because of the asynchronous nature of the admin queue mechanism, the VF returns -EBUSY to the open call, because it knows the previous operation hasn't finished yet. This causes bonding to fail with a less-than-useful error message. To fix this, remove the check for pending operations at the beginning of open. But this introduces a new bug where the driver will panic on a quick close/open cycle. To fix that, we add a new driver state, __I40EVF_DOWN_PENDING, that the driver enters when down is called. The driver finally transitions to a fully DOWN state when it receives confirmation from the PF driver that all the queues are disabled. This allows open to complete even if there is a pending mtu change, and bonding is finally happy. Change-ID: I06f4c7e435d5bacbfceaa7c3f209e0ff04be21cc Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Anjali Singhai Jain 提交于
This patch fixes the Hash PCTYPE enable for X722 since it supports a broader selection of PCTYPES for TCP and UDP. This patch also fixes a bug in XL710, X710, X722 support for RSS, as of now we cannot reduce the (4)tuple for RSS for TCP/IPv4/IPV6 or UDP/IPv4/IPv6 packets since this requires a product feature change that comes in a later release. A VF should never be allowed to change the tuples for RSS for any PCTYPE since that's a global setting for the device in case of i40e devices. Change-ID: I0ee7203c9b24813260f58f3220798bc9d9ac4a12 Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 08 1月, 2016 2 次提交
-
-
由 Jesse Brandeburg 提交于
Somehow an ID that has never been productized is in the code. There are no plans to use it, so just get rid of it. Change-ID: I59117d48ea9ee0360b0fe33833ac8092f8a24b4c Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Anjali Singhai Jain 提交于
If the driver calls skb_set_hash even with a zero hash, that indicates to the stack that the hash calculation is offloaded in hardware. So the Stack doesn't do a SW hash which is required for load balancing if the user decides to turn of rx-hashing on our device. This patch fixes the path so that we do not call skb_set_hash if the feature is disabled. Change-ID: Ic4debfa4ff91b5a72e447348a75768ed7a2d3e1b Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-