- 11 10月, 2007 13 次提交
-
-
由 Stephen Rothwell 提交于
We no longer initialise the name and owner fields of the of_platform_driver, but use the fields of the embedded device_driver's name field instead. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Acked-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Stephen Rothwell 提交于
This way we only have entries in the device tree for disks that actually exist. A slight complication is that disks may be attached to LPARs at runtime. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Acked-by: NJens Axboe <jens.axboe@oracle.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Stephen Rothwell 提交于
Now we will only have entries in the device tree for the actual existing devices (including their OS/400 properties). This way viotape.c gets all the information about the devices from the device tree. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Stephen Rothwell 提交于
Now we will only have entries in the device tree for the actual existing devices (including their OS/400 properties). This way viocd.c gets all the information about the devices from the device tree. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Acked-by: NJens Axboe <jens.axboe@oracle.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Stephen Rothwell 提交于
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Stephen Rothwell 提交于
It was only being used to carry around dma_iommu_ops and vio_iommu_table which we can use directly instead. This also means that vio_bus_device doesn't need to refer to them either. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Acked-by: NJens Axboe <jens.axboe@oracle.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Stephen Rothwell 提交于
We don't need to keep a lump of dma coherent memory around for the life of the module. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Acked-by: NJens Axboe <jens.axboe@oracle.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Stephen Rothwell 提交于
Remove vio_dma_ops declaration (since it no longer exists) and some unused fields from struct vio_driver. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Grant Likely 提交于
There is no good reason for board platform code to mess with the ROOT_DEV. Remove it from all in-tree platforms except powermac. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Grant Likely 提交于
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Acked-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Grant Likely 提交于
This allows platforms which don't have anything to do at setup_arch time (like a bunch of the 4xx platforms) to eliminate an empty setup_arch hook. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Stephen Rothwell 提交于
Our _GLOBAL macro does a ".align 2" so the alignment is fine for 32 bit, but on 64 bit it is possible for it to end up only 4 byte aligned. I don't know if it matters, but it can't hurt to 8 byte align it. It also means that when we build with --emit_relocs, none of our 64 bit relocations are to misaligned places. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 09 10月, 2007 16 次提交
-
-
由 Robert P. J. Day 提交于
There is no BOOTIMG Kconfig variable, not to mention that there is no include/linux/bootimg.h header file. Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Geoff Levand 提交于
Add support for a simple tagged database in the PS3 flash rom os-area. The database allows the flash rom os-area to be shared between a bootloader and installed operating systems. The application ps3-flash-util or the library libps3-utils from the ps3-utils package can be used for userspace database operations. The latest ps3-utils package is available here: git://git.kernel.org/pub/scm/linux/kernel/git/geoff/ps3-utils.gitSigned-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Geoff Levand 提交于
Add the PS3 os-area startup params to the device tree. This allows a second stage kernel loaded with kexec to use these values. Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Geoff Levand 提交于
Updates for PS3 os-area rtc_diff set/get routines o Add a new routine ps3_os_area_set_rtc_diff(). o Rename ps3_os_area_rtc_diff() to ps3_os_area_get_rtc_diff(). o Remove static variable rtc_shift with calls to ps3_os_area_get_rtc_diff(). Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Geoff Levand 提交于
Add a workqueue to the PS3 os-area support. This is needed to support writing updates to flash memory and to update the /proc device tree entries from the timer tick interrupt context. Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Geoff Levand 提交于
Updates for PS3 os-area startup params o Remove some unused PS3 os-area startup params from struct saved_params. o Rename ps3_os_area_init() to ps3_os_area_save_params(). o Zero mirrored header after saving params. Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Geoff Levand 提交于
Minor cleanup of the PS3 file os-area.c: o Correct file text header. o Add type names enum os_area_ldr_format, enum os_area_boot_flag, enum os_area_ctrl_button. o Change struct os_area_header.magic_num type to u8. o Add preprocessor macro SECONDS_FROM_1970_TO_2000. Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Benjamin Herrenschmidt 提交于
This adds definitions for the Cell memory controller registers (at least some of them) for use by the EDAC driver for ECC error reporting. It also expose the said MIC as a platform device that can be used by the EDAC driver to match on. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Benjamin Herrenschmidt 提交于
The new Cell EDAC driver needs that file, oprofile also does ugly path tricks to get to it, it's time to move it to asm-powerpc. While at it, rename it to be consistent with cell-pmu.h (and dashes look nicer than underscores anyway). Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Grant Likely 提交于
Add '-g' to BOOTCFLAGS if CONFIG_DEBUG_INFO is set. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Paul Mackerras 提交于
Since bootdevice never gets initialized, it's always NULL, and hence a whole pile of code in arch/powerpc/platforms/setup.c never gets used. (This was the code that originally was there so that the automatic root partition selection mechanism would prefer a rootish-looking partition on the device that OF loaded the kernel from over a similar partition on other devices.) This removes the unused code. Signed-off-by: NPaul Mackerras <paulus@samba.org> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Stephen Rothwell 提交于
WARNING: vmlinux.o(.text+0x2ff5c): Section mismatch: reference to .init.text:.pmac_find_ide_boot (between '.note_bootable_part' and '.note_scsi_host') >From holly_defconfig: WARNING: vmlinux.o(.text+0x164fe): Section mismatch: reference to .init.data:boot_command_line (between 'note_bootable_part' and 'find_via_pmu') WARNING: vmlinux.o(.text+0x16506): Section mismatch: reference to .init.data:boot_command_line (between 'note_bootable_part' and 'find_via_pmu') >From linkstation_defconfig: WARNING: vmlinux.o(.text+0x158fe): Section mismatch: reference to .init.data:boot_command_line (between 'note_bootable_part' and 'find_via_pmu') WARNING: vmlinux.o(.text+0x15906): Section mismatch: reference to .init.data:boot_command_line (between 'note_bootable_part' and 'find_via_pmu') >From mpc7448_hpc2_defconfig: WARNING: vmlinux.o(.text+0x1583e): Section mismatch: reference to .init.data:boot_command_line (between 'note_bootable_part' and 'find_via_pmu') WARNING: vmlinux.o(.text+0x15846): Section mismatch: reference to .init.data:boot_command_line (between 'note_bootable_part' and 'find_via_pmu') >From pmac32_defconfig: WARNING: vmlinux.o(.text+0x154ca): Section mismatch: reference to .init.data:boot_command_line (between 'note_bootable_part' and 'note_scsi_host') WARNING: vmlinux.o(.text+0x154d2): Section mismatch: reference to .init.data:boot_command_line (between 'note_bootable_part' and 'note_scsi_host') WARNING: vmlinux.o(.text+0x1553c): Section mismatch: reference to .init.text:pmac_find_ide_boot (between 'note_bootable_part' and 'note_scsi_host') >From ppc64_defconfig: WARNING: vmlinux.o(.text+0x3acdc): Section mismatch: reference to .init.text:.pmac_find_ide_boot (between '.note_bootable_part' and '.note_scsi_host') >From prpmc2800_defconfig: WARNING: vmlinux.o(.text+0x1611e): Section mismatch: reference to .init.data:boot_command_line (between 'note_bootable_part' and 'find_via_pmu') WARNING: vmlinux.o(.text+0x16126): Section mismatch: reference to .init.data:boot_command_line (between 'note_bootable_part' and 'find_via_pmu') Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Paul Mackerras 提交于
Discussions with firmware architects have confirmed that the bit in the ibm,pa-features property that indicates support for cache-inhibited large (>= 64kB) page mappings does in fact mean that the hypervisor allows 64kB mappings to I/O devices. Thus we can now enable the code that tests that bit and sets our CPU_FTR_CI_LARGE_PAGE feature bit. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Stephen Rothwell 提交于
The name field of of_platform_driver is just copied into the included device_driver. By not overriding an already initialised device_driver name, we can convert the drivers over time to stop using the of_platform_driver name. Also we were not copying the owner field from of_platform_driver, so do the same with it. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Stephen Rothwell 提交于
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Grant Likely 提交于
DTC now supports "foo","bar" format for lists of strings; use the new format on the lite5200 device trees. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 08 10月, 2007 11 次提交
-
-
由 Peter Korsgaard 提交于
On non-QE processors (mpc831x/mpc834x) the SPI clock is the SoC clock. Signed-off-by: NPeter Korsgaard <jacmet@sunsite.dk> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Anton Vorontsov 提交于
Apart from that the current code doesn't compile it's also meaningless with regard to the MPC8568E-MDS' BCSR. This patch used to reset UCCs properly. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Anton Vorontsov 提交于
1. UCC1's RX_DV pin is 16, not 15; 2. UCC1's phy is at 0x7, not 0x1. Schematics says 0x7, and recent u-boot also using 0x7. 3. Use gianfar's (eTSEC) mdio bus. This is hardware default setup. 4. tx-clock should be CLK16 (GE125, PB31); 5. phy-connection-type is RGMII-ID; Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Anton Vorontsov 提交于
8 bytes padding required to match MPC85xx registers layout. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Reviewed-by: NKim Phillips <kim.phillips@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Anton Vorontsov 提交于
set_irq_chained_handler overwrites MPIC's handle_irq function (handle_fasteoi_irq) thus MPIC never gets eoi event from the cascaded IRQ. This situation hangs MPIC on MPC8568E. To solve this problem efficiently, QEIC needs pluggable handlers, specific to the underlaying interrupt controller. Patch extends qe_ic_init() function to accept low and high interrupt handlers. To avoid #ifdefs, stack of interrupt handlers specified in the header file and functions are marked 'static inline', thus handlers are compiled-in only if actually used (in the board file). Another option would be to lookup for parent controller and automatically detect handlers (will waste text size because of never used handlers, so this option abolished). qe_ic_init() also changed in regard to support multiplexed high/low lines as found in MPC8568E-MDS, plus qe_ic_cascade_muxed_mpic() handler implemented appropriately. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Anton Vorontsov 提交于
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Timur Tabi 提交于
Update the definition of the global utilities structure (ccsr_guts) in immap_86xx.h and add some related macros for the Freescale 8610 SOC. Signed-off-by: NTimur Tabi <timur@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Kumar Gala 提交于
On the majority of 85xx & 86xx we have a register that's ability to assert HRESET_REQ to reset the board. We refactored that code so it can be shared between both platforms into fsl_soc.c and removed all the duplication in each platform directory. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Kumar Gala 提交于
On the Freescale embedded (83xx, 85xx, 86xx) and a few of the discrete bridges (mpc10x, tsi108) use the new for_each_compatible_node() or for_each_node_by_type() to provide more exact matching when looking for PHBs in the device tree. With the previous code it was possible to match on pci bridges since we were only matching on device_type. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Kumar Gala 提交于
The LTSSM register is actual 32-bits wide so we should be doing a dword access. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Dale Farnsworth 提交于
The CONFIG_FSL_BOOKE mmu setup code fails when CONFIG_HIGHMEM=y and the 3 fixed TLB entries cannot exactly map the lowmem size. Each TLB entry can map 4MB, 16MB, 64MB or 256MB, so the failure is observed when the kernel lowmem size is not equal to the sum of up to 3 of those values. Normally, memory is sized in nice numbers, but I observed this problem while testing a crash dump kernel. The failure can also be observed by artificially reducing the kernel's main memory via the mem= kernel command line parameter. This commit fixes the problem by setting __initial_memory_limit in adjust_total_lowmem(). Signed-off-by: NDale Farnsworth <dale@farnsworth.org> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-