Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
提交 dcccb37e 编写于 作者: G Grant Likely 提交者： Kumar Gala
浏览文件
操作

[POWERPC] Lite5200: Use comma delimiter format for lists in device tree 

DTC now supports "foo","bar" format for lists of strings; use the new
format on the lite5200 device trees.
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
上级 082ea86f
隐藏空白更改
内联 并排
Showing with 36 addition and 36 deletion
arch/powerpc/boot/dts/lite5200.dts
浏览文件 @ dcccb37e
......@@ -19,7 +19,7 @@
/ {
model = "fsl,lite5200";
// revision = "1.0";
compatible = "fsl,lite5200\0generic-mpc5200";
compatible = "fsl,lite5200","generic-mpc5200";
#address-cells = <1>;
#size-cells = <1>;
......@@ -192,7 +192,7 @@
usb@1000 {
device_type = "usb-ohci-be";
compatible = "mpc5200-ohci\0ohci-be";
compatible = "mpc5200-ohci","ohci-be";
reg = <1000 ff>;
interrupts = <2 6 0>;
interrupt-parent = <&mpc5200_pic>;
......@@ -293,7 +293,7 @@
i2c@3d00 {
device_type = "i2c";
compatible = "mpc5200-i2c\0fsl-i2c";
compatible = "mpc5200-i2c","fsl-i2c";
cell-index = <0>;
reg = <3d00 40>;
interrupts = <2 f 0>;
......@@ -303,7 +303,7 @@
i2c@3d40 {
device_type = "i2c";
compatible = "mpc5200-i2c\0fsl-i2c";
compatible = "mpc5200-i2c","fsl-i2c";
cell-index = <1>;
reg = <3d40 40>;
interrupts = <2 10 0>;
......@@ -312,7 +312,7 @@
};
sram@8000 {
device_type = "sram";
compatible = "mpc5200-sram\0sram";
compatible = "mpc5200-sram","sram";
reg = <8000 4000>;
};
};
......
arch/powerpc/boot/dts/lite5200b.dts
浏览文件 @ dcccb37e
......@@ -19,7 +19,7 @@
/ {
model = "fsl,lite5200b";
// revision = "1.0";
compatible = "fsl,lite5200b\0generic-mpc5200";
compatible = "fsl,lite5200b","generic-mpc5200";
#address-cells = <1>;
#size-cells = <1>;
......@@ -56,7 +56,7 @@
system-frequency = <0>; // from bootloader
cdm@200 {
compatible = "mpc5200b-cdm\0mpc5200-cdm";
compatible = "mpc5200b-cdm","mpc5200-cdm";
reg = <200 38>;
};
......@@ -65,12 +65,12 @@
interrupt-controller;
#interrupt-cells = <3>;
device_type = "interrupt-controller";
compatible = "mpc5200b-pic\0mpc5200-pic";
compatible = "mpc5200b-pic","mpc5200-pic";
reg = <500 80>;
};
gpt@600 { // General Purpose Timer
compatible = "mpc5200b-gpt\0mpc5200-gpt";
compatible = "mpc5200b-gpt","mpc5200-gpt";
device_type = "gpt";
cell-index = <0>;
reg = <600 10>;
......@@ -80,7 +80,7 @@
};
gpt@610 { // General Purpose Timer
compatible = "mpc5200b-gpt\0mpc5200-gpt";
compatible = "mpc5200b-gpt","mpc5200-gpt";
device_type = "gpt";
cell-index = <1>;
reg = <610 10>;
......@@ -89,7 +89,7 @@
};
gpt@620 { // General Purpose Timer
compatible = "mpc5200b-gpt\0mpc5200-gpt";
compatible = "mpc5200b-gpt","mpc5200-gpt";
device_type = "gpt";
cell-index = <2>;
reg = <620 10>;
......@@ -98,7 +98,7 @@
};
gpt@630 { // General Purpose Timer
compatible = "mpc5200b-gpt\0mpc5200-gpt";
compatible = "mpc5200b-gpt","mpc5200-gpt";
device_type = "gpt";
cell-index = <3>;
reg = <630 10>;
......@@ -107,7 +107,7 @@
};
gpt@640 { // General Purpose Timer
compatible = "mpc5200b-gpt\0mpc5200-gpt";
compatible = "mpc5200b-gpt","mpc5200-gpt";
device_type = "gpt";
cell-index = <4>;
reg = <640 10>;
......@@ -116,7 +116,7 @@
};
gpt@650 { // General Purpose Timer
compatible = "mpc5200b-gpt\0mpc5200-gpt";
compatible = "mpc5200b-gpt","mpc5200-gpt";
device_type = "gpt";
cell-index = <5>;
reg = <650 10>;
......@@ -125,7 +125,7 @@
};
gpt@660 { // General Purpose Timer
compatible = "mpc5200b-gpt\0mpc5200-gpt";
compatible = "mpc5200b-gpt","mpc5200-gpt";
device_type = "gpt";
cell-index = <6>;
reg = <660 10>;
......@@ -134,7 +134,7 @@
};
gpt@670 { // General Purpose Timer
compatible = "mpc5200b-gpt\0mpc5200-gpt";
compatible = "mpc5200b-gpt","mpc5200-gpt";
device_type = "gpt";
cell-index = <7>;
reg = <670 10>;
......@@ -143,7 +143,7 @@
};
rtc@800 { // Real time clock
compatible = "mpc5200b-rtc\0mpc5200-rtc";
compatible = "mpc5200b-rtc","mpc5200-rtc";
device_type = "rtc";
reg = <800 100>;
interrupts = <1 5 0 1 6 0>;
......@@ -152,7 +152,7 @@
mscan@900 {
device_type = "mscan";
compatible = "mpc5200b-mscan\0mpc5200-mscan";
compatible = "mpc5200b-mscan","mpc5200-mscan";
cell-index = <0>;
interrupts = <2 11 0>;
interrupt-parent = <&mpc5200_pic>;
......@@ -161,7 +161,7 @@
mscan@980 {
device_type = "mscan";
compatible = "mpc5200b-mscan\0mpc5200-mscan";
compatible = "mpc5200b-mscan","mpc5200-mscan";
cell-index = <1>;
interrupts = <2 12 0>;
interrupt-parent = <&mpc5200_pic>;
......@@ -169,14 +169,14 @@
};
gpio@b00 {
compatible = "mpc5200b-gpio\0mpc5200-gpio";
compatible = "mpc5200b-gpio","mpc5200-gpio";
reg = <b00 40>;
interrupts = <1 7 0>;
interrupt-parent = <&mpc5200_pic>;
};
gpio-wkup@c00 {
compatible = "mpc5200b-gpio-wkup\0mpc5200-gpio-wkup";
compatible = "mpc5200b-gpio-wkup","mpc5200-gpio-wkup";
reg = <c00 40>;
interrupts = <1 8 0 0 3 0>;
interrupt-parent = <&mpc5200_pic>;
......@@ -184,7 +184,7 @@
spi@f00 {
device_type = "spi";
compatible = "mpc5200b-spi\0mpc5200-spi";
compatible = "mpc5200b-spi","mpc5200-spi";
reg = <f00 20>;
interrupts = <2 d 0 2 e 0>;
interrupt-parent = <&mpc5200_pic>;
......@@ -192,7 +192,7 @@
usb@1000 {
device_type = "usb-ohci-be";
compatible = "mpc5200b-ohci\0mpc5200-ohci\0ohci-be";
compatible = "mpc5200b-ohci","mpc5200-ohci","ohci-be";
reg = <1000 ff>;
interrupts = <2 6 0>;
interrupt-parent = <&mpc5200_pic>;
......@@ -200,7 +200,7 @@
bestcomm@1200 {
device_type = "dma-controller";
compatible = "mpc5200b-bestcomm\0mpc5200-bestcomm";
compatible = "mpc5200b-bestcomm","mpc5200-bestcomm";
reg = <1200 80>;
interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
3 4 0 3 5 0 3 6 0 3 7 0
......@@ -210,13 +210,13 @@
};
xlb@1f00 {
compatible = "mpc5200b-xlb\0mpc5200-xlb";
compatible = "mpc5200b-xlb","mpc5200-xlb";
reg = <1f00 100>;
};
serial@2000 { // PSC1
device_type = "serial";
compatible = "mpc5200b-psc-uart\0mpc5200-psc-uart";
compatible = "mpc5200b-psc-uart","mpc5200-psc-uart";
port-number = <0>; // Logical port assignment
cell-index = <0>;
reg = <2000 100>;
......@@ -227,7 +227,7 @@
// PSC2 in ac97 mode example
//ac97@2200 { // PSC2
// device_type = "sound";
// compatible = "mpc5200b-psc-ac97\0mpc5200-psc-ac97";
// compatible = "mpc5200b-psc-ac97","mpc5200-psc-ac97";
// cell-index = <1>;
// reg = <2200 100>;
// interrupts = <2 2 0>;
......@@ -247,7 +247,7 @@
// PSC4 in uart mode example
//serial@2600 { // PSC4
// device_type = "serial";
// compatible = "mpc5200b-psc-uart\0mpc5200-psc-uart";
// compatible = "mpc5200b-psc-uart","mpc5200-psc-uart";
// cell-index = <3>;
// reg = <2600 100>;
// interrupts = <2 b 0>;
......@@ -257,7 +257,7 @@
// PSC5 in uart mode example
//serial@2800 { // PSC5
// device_type = "serial";
// compatible = "mpc5200b-psc-uart\0mpc5200-psc-uart";
// compatible = "mpc5200b-psc-uart","mpc5200-psc-uart";
// cell-index = <4>;
// reg = <2800 100>;
// interrupts = <2 c 0>;
......@@ -267,7 +267,7 @@
// PSC6 in spi mode example
//spi@2c00 { // PSC6
// device_type = "spi";
// compatible = "mpc5200b-psc-spi\0mpc5200-psc-spi";
// compatible = "mpc5200b-psc-spi","mpc5200-psc-spi";
// cell-index = <5>;
// reg = <2c00 100>;
// interrupts = <2 4 0>;
......@@ -276,7 +276,7 @@
ethernet@3000 {
device_type = "network";
compatible = "mpc5200b-fec\0mpc5200-fec";
compatible = "mpc5200b-fec","mpc5200-fec";
reg = <3000 800>;
mac-address = [ 02 03 04 05 06 07 ]; // Bad!
interrupts = <2 5 0>;
......@@ -285,7 +285,7 @@
ata@3a00 {
device_type = "ata";
compatible = "mpc5200b-ata\0mpc5200-ata";
compatible = "mpc5200b-ata","mpc5200-ata";
reg = <3a00 100>;
interrupts = <2 7 0>;
interrupt-parent = <&mpc5200_pic>;
......@@ -293,7 +293,7 @@
i2c@3d00 {
device_type = "i2c";
compatible = "mpc5200b-i2c\0mpc5200-i2c\0fsl-i2c";
compatible = "mpc5200b-i2c","mpc5200-i2c","fsl-i2c";
cell-index = <0>;
reg = <3d00 40>;
interrupts = <2 f 0>;
......@@ -303,7 +303,7 @@
i2c@3d40 {
device_type = "i2c";
compatible = "mpc5200b-i2c\0mpc5200-i2c\0fsl-i2c";
compatible = "mpc5200b-i2c","mpc5200-i2c","fsl-i2c";
cell-index = <1>;
reg = <3d40 40>;
interrupts = <2 10 0>;
......@@ -312,7 +312,7 @@
};
sram@8000 {
device_type = "sram";
compatible = "mpc5200b-sram\0mpc5200-sram\0sram";
compatible = "mpc5200b-sram","mpc5200-sram","sram";
reg = <8000 4000>;
};
};
......@@ -322,7 +322,7 @@
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
compatible = "mpc5200b-pci\0mpc5200-pci";
compatible = "mpc5200b-pci","mpc5200-pci";
reg = <f0000d00 100>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <c000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或