- 03 11月, 2013 2 次提交
-
-
由 Shirish Pargaonkar 提交于
Send a smb session logoff request before removing smb session off of the list. On a signed smb session, remvoing a session off of the list before sending a logoff request results in server returning an error for lack of smb signature. Never seen an error during smb logoff, so as per MS-SMB2 3.2.5.1, not sure how an error during logoff should be retried. So for now, if a server returns an error to a logoff request, log the error and remove the session off of the list. Signed-off-by: NShirish Pargaonkar <shirishpargaonkar@gmail.com> Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <smfrench@gmail.com>
-
由 Tim Gardner 提交于
The multiplex identifier (MID) in the SMB header is only ever used by the client, in conjunction with PID, to match responses from the server. As such, the endianess of the MID is not important. However, When tracing packet sequences on the wire, protocol analyzers such as wireshark display MID as little endian. It is much more informative for the on-the-wire MID sequences to match debug information emitted by the CIFS driver. Therefore, one should write and read MID in the SMB header assuming it is always little endian. Observed from wireshark during the protocol negotiation and session setup: Multiplex ID: 256 Multiplex ID: 256 Multiplex ID: 512 Multiplex ID: 512 Multiplex ID: 768 Multiplex ID: 768 After this patch on-the-wire MID values begin at 1 and increase monotonically. Introduce get_next_mid64() for the internal consumers that use the full 64 bit multiplex identifier. Introduce the helpers get_mid() and compare_mid() to make the endian translation clear. Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NTim Gardner <timg@tpi.com> Signed-off-by: NSteve French <smfrench@gmail.com>
-
- 07 10月, 2013 1 次提交
-
-
由 Shirish Pargaonkar 提交于
Do not send SMB2 Logoff command when reconnecting, the way smb1 code base works. Also, no need to wait for a credit for an echo command when one is already in flight. Without these changes, umount command hangs if the server is unresponsive e.g. hibernating. Signed-off-by: NShirish Pargaonkar <shirishpargaonkar@gmail.com> Acked-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <smfrench@us.ibm.com>
-
- 24 6月, 2013 1 次提交
-
-
由 Jeff Layton 提交于
Currently, we determine this according to flags in the sec_mode, flags in the global_secflags and via other methods. That makes the semantics very hard to follow and there are corner cases where we don't handle this correctly. Add a new bool to the TCP_Server_Info that acts as a simple flag to tell us whether signing is enabled on this connection or not, and fix up the places that need to determine this to use that flag. This is a bit weird for the SMB2 case, where signing is per-session. SMB2 needs work in this area already though. The existing SMB2 code has similar logic to what we're using here, so there should be no real change in behavior. These changes should make it easier to implement per-session signing in the future though. Signed-off-by: NJeff Layton <jlayton@redhat.com> Reviewed-by: NPavel Shilovsky <piastry@etersoft.ru> Signed-off-by: NSteve French <smfrench@gmail.com>
-
- 12 5月, 2013 1 次提交
-
-
由 Colin Cross 提交于
CIFS calls wait_event_freezekillable_unsafe with a VFS lock held, which is unsafe and will cause lockdep warnings when 6aa97070 "lockdep: check that no locks held at freeze time" is reapplied (it was reverted in dbf520a9). CIFS shouldn't be doing this, but it has long-running syscalls that must hold a lock but also shouldn't block suspend. Until CIFS freeze handling is rewritten to use a signal to exit out of the critical section, add a new wait_event_freezekillable_unsafe helper that will not run the lockdep test when 6aa97070 is reapplied, and call it from CIFS. In practice the likley result of holding the lock while freezing is that a second task blocked on the lock will never freeze, aborting suspend, but it is possible to manufacture a case using the cgroup freezer, the lock, and the suspend freezer to create a deadlock. Silencing the lockdep warning here will allow problems to be found in other drivers that may have a more serious deadlock risk, and prevent new problems from being added. Acked-by: NPavel Machek <pavel@ucw.cz> Acked-by: NTejun Heo <tj@kernel.org> Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NColin Cross <ccross@android.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 05 5月, 2013 4 次提交
-
-
由 Jeff Layton 提交于
Currently, the signing routines take a pointer to a place to store the expected sequence number for the mid response. It then stores a value that's one below what that sequence number should be, and then adds one to it when verifying the signature on the response. Increment the sequence number before storing the value in the mid, and eliminate the "+1" when checking the signature. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com> Signed-off-by: NSteve French <smfrench@gmail.com>
-
由 Jeff Layton 提交于
If sending a call to the server fails for some reason (for instance, the sending thread caught a signal), then we must readjust the sequence number downward again or the next send will have it too high. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com> Signed-off-by: NSteve French <smfrench@gmail.com>
-
由 Jeff Layton 提交于
To my knowledge, no one ever reported seeing this pop. Acked-by: NSuresh Jayaraman <sjayaraman@novell.com> Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com> Signed-off-by: NSteve French <smfrench@gmail.com>
-
由 Joe Perches 提交于
It's not obvious from reading the macro names that these macros are for debugging. Convert the names to a single more typical kernel style cifs_dbg macro. cERROR(1, ...) -> cifs_dbg(VFS, ...) cFYI(1, ...) -> cifs_dbg(FYI, ...) cFYI(DBG2, ...) -> cifs_dbg(NOISY, ...) Move the terminating format newline from the macro to the call site. Add CONFIG_CIFS_DEBUG function cifs_vfs_err to emit the "CIFS VFS: " prefix for VFS messages. Size is reduced ~ 1% when CONFIG_CIFS_DEBUG is set (default y) $ size fs/cifs/cifs.ko* text data bss dec hex filename 265245 2525 132 267902 4167e fs/cifs/cifs.ko.new 268359 2525 132 271016 422a8 fs/cifs/cifs.ko.old Other miscellaneous changes around these conversions: o Miscellaneous typo fixes o Add terminating \n's to almost all formats and remove them from the macros to be more kernel style like. A few formats previously had defective \n's o Remove unnecessary OOM messages as kmalloc() calls dump_stack o Coalesce formats to make grep easier, added missing spaces when coalescing formats o Use %s, __func__ instead of embedded function name o Removed unnecessary "cifs: " prefixes o Convert kzalloc with multiply to kcalloc o Remove unused cifswarn macro Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <smfrench@gmail.com>
-
- 31 12月, 2012 1 次提交
-
-
由 Jeff Layton 提交于
Cai reported this oops: [90701.616664] BUG: unable to handle kernel NULL pointer dereference at 0000000000000028 [90701.625438] IP: [<ffffffff814a343e>] kernel_setsockopt+0x2e/0x60 [90701.632167] PGD fea319067 PUD 103fda4067 PMD 0 [90701.637255] Oops: 0000 [#1] SMP [90701.640878] Modules linked in: des_generic md4 nls_utf8 cifs dns_resolver binfmt_misc tun sg igb iTCO_wdt iTCO_vendor_support lpc_ich pcspkr i2c_i801 i2c_core i7core_edac edac_core ioatdma dca mfd_core coretemp kvm_intel kvm crc32c_intel microcode sr_mod cdrom ata_generic sd_mod pata_acpi crc_t10dif ata_piix libata megaraid_sas dm_mirror dm_region_hash dm_log dm_mod [90701.677655] CPU 10 [90701.679808] Pid: 9627, comm: ls Tainted: G W 3.7.1+ #10 QCI QSSC-S4R/QSSC-S4R [90701.688950] RIP: 0010:[<ffffffff814a343e>] [<ffffffff814a343e>] kernel_setsockopt+0x2e/0x60 [90701.698383] RSP: 0018:ffff88177b431bb8 EFLAGS: 00010206 [90701.704309] RAX: ffff88177b431fd8 RBX: 00007ffffffff000 RCX: ffff88177b431bec [90701.712271] RDX: 0000000000000003 RSI: 0000000000000006 RDI: 0000000000000000 [90701.720223] RBP: ffff88177b431bc8 R08: 0000000000000004 R09: 0000000000000000 [90701.728185] R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000001 [90701.736147] R13: ffff88184ef92000 R14: 0000000000000023 R15: ffff88177b431c88 [90701.744109] FS: 00007fd56a1a47c0(0000) GS:ffff88105fc40000(0000) knlGS:0000000000000000 [90701.753137] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [90701.759550] CR2: 0000000000000028 CR3: 000000104f15f000 CR4: 00000000000007e0 [90701.767512] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [90701.775465] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [90701.783428] Process ls (pid: 9627, threadinfo ffff88177b430000, task ffff88185ca4cb60) [90701.792261] Stack: [90701.794505] 0000000000000023 ffff88177b431c50 ffff88177b431c38 ffffffffa014fcb1 [90701.802809] ffff88184ef921bc 0000000000000000 00000001ffffffff ffff88184ef921c0 [90701.811123] ffff88177b431c08 ffffffff815ca3d9 ffff88177b431c18 ffff880857758000 [90701.819433] Call Trace: [90701.822183] [<ffffffffa014fcb1>] smb_send_rqst+0x71/0x1f0 [cifs] [90701.828991] [<ffffffff815ca3d9>] ? schedule+0x29/0x70 [90701.834736] [<ffffffffa014fe6d>] smb_sendv+0x3d/0x40 [cifs] [90701.841062] [<ffffffffa014fe96>] smb_send+0x26/0x30 [cifs] [90701.847291] [<ffffffffa015801f>] send_nt_cancel+0x6f/0xd0 [cifs] [90701.854102] [<ffffffffa015075e>] SendReceive+0x18e/0x360 [cifs] [90701.860814] [<ffffffffa0134a78>] CIFSFindFirst+0x1a8/0x3f0 [cifs] [90701.867724] [<ffffffffa013f731>] ? build_path_from_dentry+0xf1/0x260 [cifs] [90701.875601] [<ffffffffa013f731>] ? build_path_from_dentry+0xf1/0x260 [cifs] [90701.883477] [<ffffffffa01578e6>] cifs_query_dir_first+0x26/0x30 [cifs] [90701.890869] [<ffffffffa015480d>] initiate_cifs_search+0xed/0x250 [cifs] [90701.898354] [<ffffffff81195970>] ? fillonedir+0x100/0x100 [90701.904486] [<ffffffffa01554cb>] cifs_readdir+0x45b/0x8f0 [cifs] [90701.911288] [<ffffffff81195970>] ? fillonedir+0x100/0x100 [90701.917410] [<ffffffff81195970>] ? fillonedir+0x100/0x100 [90701.923533] [<ffffffff81195970>] ? fillonedir+0x100/0x100 [90701.929657] [<ffffffff81195848>] vfs_readdir+0xb8/0xe0 [90701.935490] [<ffffffff81195b9f>] sys_getdents+0x8f/0x110 [90701.941521] [<ffffffff815d3b99>] system_call_fastpath+0x16/0x1b [90701.948222] Code: 66 90 55 65 48 8b 04 25 f0 c6 00 00 48 89 e5 53 48 83 ec 08 83 fe 01 48 8b 98 48 e0 ff ff 48 c7 80 48 e0 ff ff ff ff ff ff 74 22 <48> 8b 47 28 ff 50 68 65 48 8b 14 25 f0 c6 00 00 48 89 9a 48 e0 [90701.970313] RIP [<ffffffff814a343e>] kernel_setsockopt+0x2e/0x60 [90701.977125] RSP <ffff88177b431bb8> [90701.981018] CR2: 0000000000000028 [90701.984809] ---[ end trace 24bd602971110a43 ]--- This is likely due to a race vs. a reconnection event. The current code checks for a NULL socket in smb_send_kvec, but that's too late. By the time that check is done, the socket will already have been passed to kernel_setsockopt. Move the check into smb_send_rqst, so that it's checked earlier. In truth, this is a bit of a half-assed fix. The -ENOTSOCK error return here looks like it could bubble back up to userspace. The locking rules around the ssocket pointer are really unclear as well. There are cases where the ssocket pointer is changed without holding the srv_mutex, but I'm not clear whether there's a potential race here yet or not. This code seems like it could benefit from some fundamental re-think of how the socket handling should behave. Until then though, this patch should at least fix the above oops in most cases. Cc: <stable@vger.kernel.org> # 3.7+ Reported-and-Tested-by: NCAI Qian <caiqian@redhat.com> Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <smfrench@gmail.com>
-
- 08 10月, 2012 1 次提交
-
-
由 Steve French 提交于
kernel_sendmsg() is less likely to return -ENOSPC and it might be a bug to do so. However, in the past there might have been cases where a -ENOSPC was returned from a low level driver. Add a WARN_ON_ONCE() to ensure that it is safe to assume that -ENOSPC is no longer returned. This -ENOSPC specific handling will be removed once we are sure it is no longer returned. Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSuresh Jayaraman <sjayaraman@suse.com> Signed-off-by: NSteve French <smfrench@gmail.com>
-
- 25 9月, 2012 7 次提交
-
-
由 Jeff Layton 提交于
For now, none of the callers populate rq_pages. That will be done for writes in a later patch. While we're at it, change the prototype of setup_async_request not to need a return pointer argument. Just return the pointer to the mid_q_entry or an ERR_PTR. Reviewed-by: NPavel Shilovsky <pshilovsky@samba.org> Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <smfrench@gmail.com>
-
由 Jeff Layton 提交于
Use the smb_send_rqst helper function to kmap each page in the array and update the hash for that chunk. Reviewed-by: NPavel Shilovsky <pshilovsky@samba.org> Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <smfrench@gmail.com>
-
由 Jeff Layton 提交于
Add code that allows smb_send_rqst to send an array of pages after the initial kvec array has been sent. For now, we simply kmap the page array and send it using the standard smb_send_kvec function. Eventually, we may want to convert this code to use kernel_sendpage under the hood and avoid the kmap altogether for the page data. Reviewed-by: NPavel Shilovsky <pshilovsky@samba.org> Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <smfrench@gmail.com>
-
由 Jeff Layton 提交于
We want to send SMBs as "atomically" as possible. Prior to sending any data on the socket, cork it to make sure that no non-full frames go out. Afterward, uncork it to make sure all of the data gets pushed out to the wire. Note that this more or less renders the socket=TCP_NODELAY mount option obsolete. When TCP_CORK and TCP_NODELAY are used on the same socket, TCP_NODELAY is essentially ignored. Acked-by: NPavel Shilovsky <pshilovsky@samba.org> Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <smfrench@gmail.com>
-
由 Jeff Layton 提交于
Again, just a change in the arguments and some function renaming here. In later patches, we'll change this code to deal with page arrays. In this patch, we add a new smb_send_rqst wrapper and have smb_sendv call that. Then we move most of the existing smb_sendv code into a new function -- smb_send_kvec. This seems a little redundant, but later we'll flesh this out to deal with arrays of pages. Reviewed-by: NPavel Shilovsky <pshilovsky@samba.org> Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <smfrench@gmail.com>
-
由 Jeff Layton 提交于
We need a way to represent a call to be sent on the wire that does not require having all of the page data kmapped. Behold the smb_rqst struct. This new struct represents an array of kvecs immediately followed by an array of pages. Convert the signing routines to use these structs under the hood and turn the existing functions for this into wrappers around that. For now, we're just changing these functions to take different args. Later, we'll teach them how to deal with arrays of pages. Reviewed-by: NPavel Shilovsky <pshilovsky@samba.org> Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <smfrench@gmail.com>
-
由 Pavel Shilovsky 提交于
Use hmac-sha256 and rather than hmac-md5 that is used for CIFS/SMB. Signature field in SMB2 header is 16 bytes instead of 8 bytes. Automatically enable signing by client when requested by the server when signing ability is available to the client. Signed-off-by: NShirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by: NSachin Prabhu <sprabhu@redhat.com> Signed-off-by: NPavel Shilovsky <piastryyy@gmail.com> Signed-off-by: NSteve French <smfrench@gmail.com>
-
- 20 8月, 2012 1 次提交
-
-
由 Steve French 提交于
While trying to debug a SMB signature related issue with Windows Servers figured out it might be easier to debug if we print the error code from cifs_verify_signature(). Also, fix indendation while at it. Signed-off-by: NSuresh Jayaraman <sjayaraman@suse.com> Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <smfrench@gmail.com>
-
- 25 7月, 2012 1 次提交
-
-
由 Pavel Shilovsky 提交于
Signed-off-by: NPavel Shilovsky <pshilovsky@samba.org> Signed-off-by: NSteve French <smfrench@gmail.com>
-
- 24 7月, 2012 4 次提交
-
-
由 Pavel Shilovsky 提交于
Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru> Signed-off-by: NSteve French <smfrench@gmail.com>
-
由 Pavel Shilovsky 提交于
Split all requests to echos, oplocks and others - each group uses its own credit slot. This is indicated by new flags CIFS_ECHO_OP and CIFS_OBREAK_OP that are not used now for CIFS. This change is required to support SMB2 protocol because of different processing of these commands. Acked-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NPavel Shilovsky <pshilovsky@samba.org> Signed-off-by: NSteve French <smfrench@gmail.com>
-
由 Jeff Layton 提交于
"smb2" makes me think of the SMB2.x protocol, which isn't at all what this function is for... Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <smfrench@gmail.com>
-
由 Jeff Layton 提交于
There's a comment here about how we don't want to modify this length, but nothing in this function actually does. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <smfrench@gmail.com>
-
- 17 7月, 2012 1 次提交
-
-
由 Sachin Prabhu 提交于
A user reported a crash in cifs_demultiplex_thread() caused by an incorrectly set mid_q_entry->callback() function. It appears that the callback assignment made in cifs_call_async() was not flushed back to memory suggesting that a memory barrier was required here. Changing the code to make sure that the mid_q_entry structure was completely initialised before it was added to the pending queue fixes the problem. Signed-off-by: NSachin Prabhu <sprabhu@redhat.com> Reviewed-by: NJeff Layton <jlayton@redhat.com> Reviewed-by: NShirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by: NSteve French <smfrench@gmail.com>
-
- 02 6月, 2012 1 次提交
-
-
由 Pavel Shilovsky 提交于
Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NPavel Shilovsky <pshilovsky@samba.org> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 23 5月, 2012 2 次提交
-
-
由 Pavel Shilovsky 提交于
Acked-by: NShirish Pargaonkar <shirishpargaonkar@gmail.com> Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Pavel Shilovsky 提交于
Acked-by: NShirish Pargaonkar <shirishpargaonkar@gmail.com> Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 17 5月, 2012 1 次提交
-
-
由 Jeff Layton 提交于
For SMB2, this should be a no-op. Obviously if we wanted to do something for the SMB2 case, we could also define an operation here for it. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru>
-
- 24 3月, 2012 3 次提交
-
-
由 Pavel Shilovsky 提交于
to be protocol-unspecific and big enough to keep both CIFS and SMB2 values. Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru>
-
由 Pavel Shilovsky 提交于
Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru>
-
由 Pavel Shilovsky 提交于
that lets us use this functions for SMB2. Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru>
-
- 22 3月, 2012 4 次提交
-
-
由 Pavel Shilovsky 提交于
that is essential for CIFS/SMB/SMB2 oplock breaks and SMB2 echos. Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Pavel Shilovsky 提交于
to let us kill the proccess if it hangs waiting for a credit when the session is down and echo is disabled. Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Pavel Shilovsky 提交于
and send no more than credits value requests at once. For SMB/CIFS it's trivial: increment this value by receiving any message and decrement by sending one. Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Pavel Shilovsky 提交于
by making it as unsigned integer and surround access with req_lock from server structure. Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 20 3月, 2012 1 次提交
-
-
由 Pavel Shilovsky 提交于
Some servers sets this value less than 50 that was hardcoded and we lost the connection if when we exceed this limit. Fix this by respecting this value - not sending more than the server allows. Cc: stable@kernel.org Reviewed-by: NJeff Layton <jlayton@samba.org> Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru> Signed-off-by: NSteve French <stevef@smf-gateway.(none)>
-
- 20 10月, 2011 2 次提交
-
-
由 Jeff Layton 提交于
CIFS currently uses wait_event_killable to put tasks to sleep while they await replies from the server. That function though does not allow the freezer to run. In many cases, the network interface may be going down anyway, in which case the reply will never come. The client then ends up blocking the computer from suspending. Fix this by adding a new wait_event_freezable variant -- wait_event_freezekillable. The idea is to combine the behavior of wait_event_killable and wait_event_freezable -- put the task to sleep and only allow it to be awoken by fatal signals, but also allow the freezer to do its job. Signed-off-by: NJeff Layton <jlayton@redhat.com>
-
由 Jeff Layton 提交于
In order to handle larger SMBs for readpages and other calls, we want to be able to read into a preallocated set of buffers. Rather than changing all of the existing code to preallocate buffers however, we instead add a receive callback function to the MID. cifsd will call this function once the mid_q_entry has been identified in order to receive the rest of the SMB. If the mid can't be identified or the receive pointer is unset, then the standard 3rd phase receive function will be called. Reviewed-and-Tested-by: NPavel Shilovsky <piastry@etersoft.ru> Signed-off-by: NJeff Layton <jlayton@redhat.com>
-
- 13 10月, 2011 1 次提交
-
-
由 Jeff Layton 提交于
We have two versions of signature generating code. A vectorized and non-vectorized version. Eliminate a large chunk of cut-and-paste code by turning the non-vectorized version into a wrapper around the vectorized one. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <smfrench@gmail.com>
-