IO-APIC or local APIC can only be disabled at runtime anyways and
Kconfig has forced these options on for a long time now.

The Kconfigs are kept only now for the benefit of the shared acpi
boot.c code.
Signed-off-by: NAndi Kleen <ak@suse.de>

Signed-off-by: NAndi Kleen <ak@suse.de>

And move the comment to a proper place.
Signed-off-by: NAndi Kleen <ak@suse.de>

Previously it didn't align. Use the same one as the C compiler
in blended mode, which is good for K8 and Core2 and doesn't hurt
on P4.
Signed-off-by: NAndi Kleen <ak@suse.de>

- Move the slow path fallbacks to their own assembly files
This makes them much easier to read and is needed for the next change.
- Add CFI annotations for unwinding (XXX need review)
- Remove constant case which can never happen with out of line spinlocks
- Use patchable LOCK prefixes
- Don't use lock sections anymore for inline code because they can't
be expressed by the unwinder (this adds one taken jump to the lock
fast path)

Cc: jbeulich@novell.com
Signed-off-by: NAndi Kleen <ak@suse.de>

Use knowledge about EFLAGS layout (bits 22:63 are always 0) to distingush
EFLAGS word and kernel address in the spin lock stack frame.
Signed-off-by: NAndi Kleen <ak@suse.de>

Based on patch from Frank van Maarseveen <frankvm@frankvm.com>, but
extended.
Signed-off-by: NAndi Kleen <ak@suse.de>

A few trivial spelling and grammar mistakes picked up in
"arch/x86_64/aperture.c", "arch/x86_64/crash.c" and
"arch/x86_64/apic.c". I think all are correct fixes but am ever aware
of my fallibility :o) This is my first patch submission so all
feedback is appreciated, esp. WRT CCing to Linus, Andi and
trivial@kernel.org, is this correct? And which is the most appropriate
kernel version to diff against? If any.

Should apply cleanly to 2.6.18-rc1
Signed-off-by: NAdam Henley <adamazing@gmail.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

-  adam

Hello,

Following my discussion with Andi. Here is a patch that introduces
two new TIF flags to simplify the context switch code in __switch_to().
The idea is to minimize the number of cache lines accessed in the common
case, i.e., when neither the debug registers nor the I/O bitmap are used.

This patch covers the x86-64 modifications. A patch for i386 follows.

Changelog:
	- add TIF_DEBUG to track when debug registers are active
	- add TIF_IO_BITMAP to track when I/O bitmap is used
	- modify __switch_to() to use the new TIF flags

<signed-off-by>: eranian@hpl.hp.com
Signed-off-by: NAndi Kleen <ak@suse.de>

No need to include it from entry.S
Drop all the #ifdef __ASSEMBLY__
Signed-off-by: NAndi Kleen <ak@suse.de>

For NUMA optimization and some other algorithms it is useful to have a fast
to get the current CPU and node numbers in user space.

x86-64 added a fast way to do this in a vsyscall. This adds a generic
syscall for other architectures to make it a generic portable facility.

I expect some of them will also implement it as a faster vsyscall.

The cache is an optimization for the x86-64 vsyscall optimization. Since
what the syscall returns is an approximation anyways and user space
often wants very fast results it can be cached for some time.  The norma
methods to get this information in user space are relatively slow

The vsyscall is in a better position to manage the cache because it has direct
access to a fast time stamp (jiffies). For the generic syscall optimization
it doesn't help much, but enforce a valid argument to keep programs
portable

I only added an i386 syscall entry for now. Other architectures can follow
as needed.

AK: Also added some cleanups from Andrew Morton
Signed-off-by: NAndi Kleen <ak@suse.de>

This patch adds a vgetcpu vsyscall, which depending on the CPU RDTSCP
capability uses either the RDTSCP or CPUID to obtain a CPU and node
numbers and pass them to the program.

AK: Lots of changes over Vojtech's original code:
Better prototype for vgetcpu()
It's better to pass the cpu / node numbers as separate arguments
to avoid mistakes when going from SMP to NUMA.
Also add a fast time stamp based cache using a user supplied
argument to speed things more up.
Use fast method from Chuck Ebbert to retrieve node/cpu from
GDT limit instead of CPUID
Made sure RDTSCP init is always executed after node is known.
Drop printk
Signed-off-by: NVojtech Pavlik <vojtech@suse.cz>
Signed-off-by: NAndi Kleen <ak@suse.de>

This patch adds initalization of the RDTSCP auxilliary values to CPU numbers
to time.c. If RDTSCP is available, the MSRs are written with the respective
values. It can be later used to initalize per-cpu timekeeping variables.

AK: Some cleanups. Move externs into headers and fix CPU hotplug.
Signed-off-by: NVojtech Pavlik <vojtech@suse.cz>
Signed-off-by: NAndi Kleen <ak@suse.de>

AK: This redoes the changes I temporarily reverted.

Intel now has support for Architectural Performance Monitoring Counters
( Refer to IA-32 Intel Architecture Software Developer's Manual
http://www.intel.com/design/pentium4/manuals/253669.htm ). This
feature is present starting from Intel Core Duo and Intel Core Solo processors.

What this means is, the performance monitoring counters and some performance
monitoring events are now defined in an architectural way (using cpuid).
And there will be no need to check for family/model etc for these architectural
events.

Below is the patch to use this performance counters in nmi watchdog driver.
Patch handles both i386 and x86-64 kernels.
Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

After a crash we should wait for NMI IPI event and not for external NMI or
NMI watchdog tick.
Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>

When a unknown NMI happened the panic would claim a NMI watchdog timeout.
Also it would check the variable set by nmi_watchdog=panic and panic then.

Fix up the panic message to be generic
Unconditionally panic on unknown NMI when panic on unknown nmi is enabled.

Noticed by Jan Beulich

Cc: jbeulich@novell.com
Signed-off-by: NAndi Kleen <ak@suse.de>

Making NMI suspend/resume work with SMP. We use CPU hotplug to offline
APs in SMP suspend/resume. Only BSP executes sysdev's .suspend/.resume
method. APs should follow CPU hotplug code path.

And:

+From: Don Zickus <dzickus@redhat.com>

Makes the start/stop paths of nmi watchdog more robust to handle the
suspend/resume cases more gracefully.

AK: I merged the two patches together
Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>

Clean up some of the output messages on the nmi error paths to make more
sense when they are displayed.  This is mainly a cosmetic fix and
shouldn't impact any normal code path.
Signed-off-by: NDon Zickus <dzickus@redhat.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

To quote Alan Cox:

The default Linux behaviour on an NMI of either memory or unknown is to
continue operation. For many environments such as scientific computing
it is preferable that the box is taken out and the error dealt with than
an uncorrected parity/ECC error get propogated.

A small number of systems do generate NMI's for bizarre random reasons
such as power management so the default is unchanged. In other respects
the new proc/sys entry works like the existing panic controls already in
that directory.

This is separate to the edac support - EDAC allows supported chipsets to
handle ECC errors well, this change allows unsupported cases to at least
panic rather than cause problems further down the line.
Signed-off-by: NDon Zickus <dzickus@redhat.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

Adds a new /proc/sys/kernel/nmi_watchdog call that will enable/disable the
nmi watchdog.

By entering a non-zero value here, a user can enable the nmi watchdog to
monitor the online cpus in the system.  By entering a zero value here, a
user can disable the nmi watchdog and free up a performance counter which
could then be utilized by the oprofile subsystem, otherwise oprofile may be
short a counter when in use.
Signed-off-by: NDon Zickus <dzickus@redhat.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>

Adds a new /proc/sys/kernel/nmi call that will enable/disable the nmi
watchdog.
Signed-off-by: NDon Zickus <dzickus@redhat.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

Removes the un/set_nmi_callback and reserve/release_lapic_nmi functions as
they are no longer needed.  The various subsystems are modified to register
with the die_notifier instead.

Also includes compile fixes by Andrew Morton.
Signed-off-by: NDon Zickus <dzickus@redhat.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

Needed TIF_RESTORE_SIGMASK first
Signed-off-by: NAndi Kleen <ak@suse.de>

We need TIF_RESTORE_SIGMASK in order to support ppoll() and pselect()
system calls. This patch originally came from Andi, and was based
heavily on David Howells' implementation of same on i386. I fixed a typo
which was causing do_signal() to use the wrong signal mask.
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
Signed-off-by: NAndi Kleen <ak@suse.de>

This patch cleans up the NMI interrupt path.  Instead of being gated by if
the 'nmi callback' is set, the interrupt handler now calls everyone who is
registered on the die_chain and additionally checks the nmi watchdog,
reseting it if enabled.  This allows more subsystems to hook into the NMI if
they need to (without being block by set_nmi_callback).
Signed-off-by: NDon Zickus <dzickus@redhat.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

This patch includes the changes to make the nmi watchdog on x86_64 SMP
aware.  A bunch of code was moved around to make it simpler to read.  In
addition, it is now possible to determine if a particular NMI was the result
of the watchdog or not.  This feature allows the kernel to filter out
unknown NMIs easier.
Signed-off-by: NDon Zickus <dzickus@redhat.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

Adds basic infrastructure to allow subsystems to reserve performance
counters on the x86 chips.  Only UP kernels are supported in this patch to
make reviewing easier.  The SMP portion makes a lot more changes.

Think of this as a locking mechanism where each bit represents a different
counter.  In addition, each subsystem should also reserve an appropriate
event selection register that will correspond to the performance counter it
will be using (this is mainly neccessary for the Pentium 4 chips as they
break the 1:1 relationship to performance counters).

This will help prevent subsystems like oprofile from interfering with the
nmi watchdog.
Signed-off-by: NDon Zickus <dzickus@redhat.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

This makes merging easier.  They are readded a few patches later.
Signed-off-by: NAndi Kleen <ak@suse.de>

Signed-off-by: NAndi Kleen <ak@suse.de>

Now that the tfm is passed directly to setkey instead of the ctx, we no
longer need to pass the &tfm->crt_flags pointer.

This patch also gets rid of a few unnecessary checks on the key length
for ciphers as the cipher layer guarantees that the key length is within
the bounds specified by the algorithm.

Rather than testing dia_setkey every time, this patch does it only once
during crypto_alloc_tfm.  The redundant check from crypto_digest_setkey
is also removed.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The patch passed the trycpt tests and automated filesystem tests.
This rewrite resulted in some nice perfomance increase over my last patch.

Short summary of the tcrypt benchmarks:

Twofish Assembler vs. Twofish C (256bit 8kb block CBC)
encrypt: -27% Cycles
decrypt: -23% Cycles

Twofish Assembler vs. AES Assembler (128bit 8kb block CBC)
encrypt: +18%  Cycles
decrypt: +15% Cycles

Twofish Assembler vs. AES Assembler (256bit 8kb block CBC)
encrypt: -9% Cycles
decrypt: -8% Cycles

Full Output:
http://homepages.tu-darmstadt.de/~fritschi/twofish/tcrypt-speed-twofish-c-x86_64.txt
http://homepages.tu-darmstadt.de/~fritschi/twofish/tcrypt-speed-twofish-asm-x86_64.txt
http://homepages.tu-darmstadt.de/~fritschi/twofish/tcrypt-speed-aes-asm-x86_64.txt


Here is another bonnie++ benchmark with encrypted filesystems. Most runs maxed
out the hd. It should give some idea what the module can do for encrypted filesystem
performance even though you can't see the full numbers.

http://homepages.tu-darmstadt.de/~fritschi/twofish/output_20060610_130806_x86_64.htmlSigned-off-by: NJoachim Fritschi <jfritschi@freenet.de>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This reverts commits 11012d41 and
40dd2d20, which allowed us to use the
MMIO accesses for PCI config cycles even without the area being marked
reserved in the e820 memory tables.

Those changes were needed for EFI-environment Intel macs, but broke some
newer Intel 965 boards, so for now it's better to revert to our old
2.6.17 behaviour and at least avoid introducing any new breakage.

Andi Kleen has a set of patches that work with both EFI and the broken
Intel 965 boards, which will be applied once they get wider testing.

Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Edgar Hucek <hostmaster@ed-soft.at>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Take default arch/*/kernel/audit.c to lib/, have those with special
needs (== biarch) define AUDIT_ARCH in their Kconfig.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

add support for AUDIT_PERM predicate
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

It's possible to get an invalid page fault in kernel mode when we try to
write out segments from vsyscall32 when dumping core for a 32bit process if
the vsyscall32 DSO is not mapped in its address space (which can happen if,
for example, ulimit -v 100 is run).
Signed-off-by: NSuleiman Souhlal <suleiman@google.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The values in init_tss.ist[] can change when an IST event occurs.  Save
the original IST values for checking stack addresses when debugging or
doing stack traces.
Signed-off-by: NKeith Owens <kaos@ocs.com.au>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

As a replacement for the earlier removal of the e820 MCFG check
we blacklist the Intel SDV with the original BIOS bug that
motivated that check. On those machines don't use MMCONFIG.

This also adds a new pci=mmconf parameter to override the blacklist.

Cc: Greg KH <gregkh@suse.de>
Cc: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Noticed by Jan Beulich.

When the kernel was moved from 1MB to 2MB in 2.6.17 the kernel reservation
code wasn't adjusted and it still reserved starting with 1MB. This means 1MB always
were lost.

This patch fixes this by reserving only starting with _text.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The unwinder fallback logic still had potential for falling through to
the legacy stack trace code without printing an indication (at once
serving as a separator) of this.

Further, the stack pointer retrieval for the fallback should be as
restrictive as possible (in order to avoid having the legacy stack
tracer try to access invalid memory). The patch tightens that, but
this could certainly be further improved.

Also making the call_trace command line option now conditional upon
CONFIG_STACK_UNWIND (as it's meaningless otherwise).
Signed-off-by: NJan Beulich <jbeulich@novell.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>