提交 a670fad0 编写于 作者: V Vojtech Pavlik 提交者: Andi Kleen

[PATCH] Add initalization of the RDTSCP auxilliary values

This patch adds initalization of the RDTSCP auxilliary values to CPU numbers
to time.c. If RDTSCP is available, the MSRs are written with the respective
values. It can be later used to initalize per-cpu timekeeping variables.

AK: Some cleanups. Move externs into headers and fix CPU hotplug.
Signed-off-by: NVojtech Pavlik <vojtech@suse.cz>
Signed-off-by: NAndi Kleen <ak@suse.de>
上级 81af4449
......@@ -1181,6 +1181,8 @@ void __init smp_cpus_done(unsigned int max_cpus)
#endif
check_nmi_watchdog();
time_init_gtod();
}
#ifdef CONFIG_HOTPLUG_CPU
......
......@@ -24,6 +24,8 @@
#include <linux/device.h>
#include <linux/sysdev.h>
#include <linux/bcd.h>
#include <linux/notifier.h>
#include <linux/cpu.h>
#include <linux/kallsyms.h>
#include <linux/acpi.h>
#ifdef CONFIG_ACPI
......@@ -49,7 +51,7 @@ static void cpufreq_delayed_get(void);
extern void i8254_timer_resume(void);
extern int using_apic_timer;
static char *time_init_gtod(void);
static char *timename = NULL;
DEFINE_SPINLOCK(rtc_lock);
EXPORT_SYMBOL(rtc_lock);
......@@ -893,11 +895,21 @@ static struct irqaction irq0 = {
timer_interrupt, IRQF_DISABLED, CPU_MASK_NONE, "timer", NULL, NULL
};
void __init time_init(void)
static int __cpuinit
time_cpu_notifier(struct notifier_block *nb, unsigned long action, void *hcpu)
{
char *timename;
char *gtod;
unsigned cpu = (unsigned long) hcpu;
if (action == CPU_ONLINE &&
cpu_has(&cpu_data[cpu], X86_FEATURE_RDTSCP)) {
unsigned p;
p = smp_processor_id() | (cpu_to_node(smp_processor_id())<<12);
write_rdtscp_aux(p);
}
return NOTIFY_DONE;
}
void __init time_init(void)
{
if (nohpet)
vxtime.hpet_address = 0;
......@@ -931,18 +943,19 @@ void __init time_init(void)
}
vxtime.mode = VXTIME_TSC;
gtod = time_init_gtod();
printk(KERN_INFO "time.c: Using %ld.%06ld MHz WALL %s GTOD %s timer.\n",
vxtime_hz / 1000000, vxtime_hz % 1000000, timename, gtod);
printk(KERN_INFO "time.c: Detected %d.%03d MHz processor.\n",
cpu_khz / 1000, cpu_khz % 1000);
vxtime.quot = (USEC_PER_SEC << US_SCALE) / vxtime_hz;
vxtime.tsc_quot = (USEC_PER_MSEC << US_SCALE) / cpu_khz;
vxtime.last_tsc = get_cycles_sync();
setup_irq(0, &irq0);
set_cyc2ns_scale(cpu_khz);
hotcpu_notifier(time_cpu_notifier, 0);
time_cpu_notifier(NULL, CPU_ONLINE, (void *)(long)smp_processor_id());
#ifndef CONFIG_SMP
time_init_gtod();
#endif
}
/*
......@@ -973,12 +986,13 @@ __cpuinit int unsynchronized_tsc(void)
/*
* Decide what mode gettimeofday should use.
*/
__init static char *time_init_gtod(void)
void time_init_gtod(void)
{
char *timetype;
if (unsynchronized_tsc())
notsc = 1;
if (vxtime.hpet_address && notsc) {
timetype = hpet_use_timer ? "HPET" : "PIT/HPET";
if (hpet_use_timer)
......@@ -1001,7 +1015,16 @@ __init static char *time_init_gtod(void)
timetype = hpet_use_timer ? "HPET/TSC" : "PIT/TSC";
vxtime.mode = VXTIME_TSC;
}
return timetype;
printk(KERN_INFO "time.c: Using %ld.%06ld MHz WALL %s GTOD %s timer.\n",
vxtime_hz / 1000000, vxtime_hz % 1000000, timename, timetype);
printk(KERN_INFO "time.c: Detected %d.%03d MHz processor.\n",
cpu_khz / 1000, cpu_khz % 1000);
vxtime.quot = (USEC_PER_SEC << US_SCALE) / vxtime_hz;
vxtime.tsc_quot = (USEC_PER_MSEC << US_SCALE) / cpu_khz;
vxtime.last_tsc = get_cycles_sync();
set_cyc2ns_scale(cpu_khz);
}
__setup("report_lost_ticks", time_setup);
......
......@@ -51,6 +51,7 @@ extern unsigned long long monotonic_base;
extern int sysctl_vsyscall;
extern int nohpet;
extern unsigned long vxtime_hz;
extern void time_init_gtod(void);
extern int numa_setup(char *opt);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册