Introduce a new data type, used by both the in-kernel NLM and NSM
implementations, that is used to manage the opaque "priv" argument
for the NSMPROC_MON and NLMPROC_SM_NOTIFY calls.

Construct the "priv" cookie when the nsm_handle is created.

The nsm_init_private() function may look a little strange, but it is
roughly equivalent to how the XDR encoder formed the "priv" argument.
It's going to go away soon.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

The nsm_find() function sets up fresh nsm_handle entries.  This is
where we will store the "priv" cookie used to lookup nsm_handles during
reboot recovery.  The cookie will be constructed when nsm_find()
creates a new nsm_handle.

As much as possible, I would like to keep everything that handles a
"priv" cookie in fs/lockd/mon.c so that all the smarts are in one
source file.  That organization should make it pretty simple to see how
all this works.

To me, it makes more sense than the current arrangement to keep
nsm_find() with nsm_monitor() and nsm_unmonitor().

So, start reorganizing by moving nsm_find() into fs/lockd/mon.c.  The
nsm_release() function comes along too, since it shares the nsm_lock
global variable.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

Clean up.

Make the nlm_host argument "const," and move the public declaration to
lockd.h.  Add a documenting comment.

Bruce observed that nsm_unmonitor()'s only caller doesn't care about
its return code, so make nsm_unmonitor() return void.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

The nsm_handle's reference count is bumped in nlm_lookup_host().  It
should be decremented in nlm_destroy_host() to make it easier to see
the balance of these two operations.

Move the nsm_release() call to fs/lockd/host.c.

The h_nsmhandle pointer is set in nlm_lookup_host(), and never cleared.
The nlm_destroy_host() function is never called for the same nlm_host
twice, so h_nsmhandle won't ever be NULL when nsm_unmonitor() is
called.

All references to the nlm_host are gone before it is freed.  We can
skip making h_nsmhandle NULL just before the nlm_host is deallocated.

It's also likely we can remove the h_nsmhandle NULL check in
nlmsvc_is_client() as well, but we can do that later when rearchitect-
ing the nlm_host cache.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

Clean up.

Make the nlm_host argument "const," and move the public declaration to
lockd.h with other NSM public function (nsm_release, eg) and global
variable declarations.

Add a documenting comment.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

The "mon_name" argument of the NSMPROC_MON and NSMPROC_UNMON upcalls
is a string that contains the hostname or IP address of the remote peer
to be notified when this host has rebooted.  The sm-notify command uses
this identifier to contact the peer when we reboot, so it must be
either a well-qualified DNS hostname or a presentation format IP
address string.

When the "nsm_use_hostnames" sysctl is set to zero, the kernel's NSM
provides a presentation format IP address in the "mon_name" argument.
Otherwise, the "caller_name" argument from NLM requests is used,
which is usually just the DNS hostname of the peer.

To support IPv6 addresses for the mon_name argument, we use the
nsm_handle's address eye-catcher, which already contains an appropriate
presentation format address string.  Using the eye-catcher string
obviates the need to use a large buffer on the stack to form the
presentation address string for the upcall.

This patch also addresses a subtle bug.

An NSMPROC_MON request and the subsequent NSMPROC_UNMON request for the
same peer are required to use the same value for the "mon_name"
argument.  Otherwise, rpc.statd's NSMPROC_UNMON processing cannot
locate the database entry for that peer and remove it.

If the setting of nsm_use_hostnames is changed between the time the
kernel sends an NSMPROC_MON request and the time it sends the
NSMPROC_UNMON request for the same peer, the "mon_name" argument for
these two requests may not be the same.  This is because the value of
"mon_name" is currently chosen at the moment the call is made based on
the setting of nsm_use_hostnames

To ensure both requests pass identical contents in the "mon_name"
argument, we now select which string to use for the argument in the
nsm_monitor() function.  A pointer to this string is saved in the
nsm_handle so it can be used for a subsequent NSMPROC_UNMON upcall.

NB: There are other potential problems, such as how nlm_host_rebooted()
might behave if nsm_use_hostnames were changed while hosts are still
being monitored.  This patch does not attempt to address those
problems.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

Clean up: I'm about to add another "char *" field to the nsm_handle
structure.  The sm_name field uses an older style of declaring a
"char *" field.  If I match that style for the new field, checkpatch.pl
will complain.

So, fix the sm_name field to use the new style.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

Scope ID support is needed since the kernel's NSM implementation is
about to use these displayed addresses as a mon_name in some cases.

When nsm_use_hostnames is zero, without scope ID support NSM will fail
to handle peers that contact us via a link-local address.  Link-local
addresses do not work without an interface ID, which is stored in the
sockaddr's sin6_scope_id field.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

The h_name field in struct nlm_host is a just copy of
h_nsmhandle->sm_name.  Likewise, the contents of the h_addrbuf field
should be identical to the sm_addrbuf field.

The h_srcaddrbuf field is used only in one place for debugging.  We can
live without this until we get %pI formatting for printk().

Currently these buffers are 48 bytes, but we need to support scope IDs
in IPv6 presentation addresses, which means making the buffers even
larger.  Instead, let's find ways to eliminate them to save space.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

Clean up: I'm about to add another "char *" field to the nlm_host
structure.  The h_name field, for example, uses an older style of
declaring a "char *" field.  If I match that style for the new field,
checkpatch.pl will complain.

So, fix pointer fields to use the new style.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

If the admin has specified the "noresvport" option for an NFS mount
point, the kernel's NFS client uses an unprivileged source port for
the main NFS transport.  The kernel's lockd client should use an
unprivileged port in this case as well.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

lockd accepts SM_NOTIFY calls only from a privileged process on the
local system.  If lockd uses an AF_INET6 listener, the sender's address
(ie the local rpc.statd) will be the IPv6 loopback address, not the
IPv4 loopback address.

Make sure the privilege test in nlmsvc_proc_sm_notify() and
nlm4svc_proc_sm_notify() works for both AF_INET and AF_INET6 family
addresses by refactoring the test into a helper and adding support for
IPv6 addresses.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

Adjust the signature and callers of nlmclnt_grant() to pass a "struct
sockaddr *" instead of a "struct sockaddr_in *" in order to support IPv6
addresses.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

Fix up nlmsvc_lookup_host() to pass AF_INET6 source addresses to
nlm_lookup_host().
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

Pass a struct sockaddr * and a length to nlmclnt_lookup_host() to
accomodate non-AF_INET family addresses.

As a side benefit, eliminate the hostname_len argument, as the hostname
is always NUL-terminated.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

Do all the grace period checks in svclock.c.  This simplifies the code a
bit, and will ease some later changes.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

Update the nlm_cmp_addr() helper to support AF_INET6 as well as AF_INET
addresses.  New version takes two "struct sockaddr *" arguments instead of
"struct sockaddr_in *" arguments.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

To store larger addresses in the nsm_handle structure, make sm_addr a
sockaddr_storage.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

To store larger addresses in the nlm_host structure, make h_saddr a
sockaddr_storage.  And let's call it something more self-explanatory:
"saddr" could easily be mistaken for "server address".
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

To store larger addresses in the nlm_host structure, make h_addr a
sockaddr_storage, and add an address length field.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

Knowing which source address is used for communicating with remote NLM
services can be helpful for debugging configuration problems on hosts
with multiple addresses.

Keep the dprintk debugging here, but adapt it so it displays AF_INET6
addresses properly.  There are also a couple of dprintk clean-ups as
well.

At some point we will aggregate the helpers that display presentation
format addresses into a single set of shared helpers.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

Pass a more generic socket address type to nlmsvc_unlock_all_by_ip() to
allow for future support of IPv6.  Also provide additional sanity
checking in failover_unlock_ip() when constructing the server's IP
address.

As an added bonus, provide clean kerneldoc comments on related NLM
interfaces which were recently added.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

nlmsvc_lock calls nlmsvc_lookup_host to find a nlm_host struct. The
callers of this function, however, call nlmsvc_retrieve_args or
nlm4svc_retrieve_args, which also return a nlm_host struct.

Change nlmsvc_lock to take a host arg instead of calling
nlmsvc_lookup_host itself and change the callers to pass a pointer to
the nlm_host they've already found.

Since nlmsvc_testlock() now just uses the caller's reference, we no
longer need to get or release it.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

nlmsvc_testlock calls nlmsvc_lookup_host to find a nlm_host struct. The
callers of this functions, however, call nlmsvc_retrieve_args or
nlm4svc_retrieve_args, which also return a nlm_host struct.

Change nlmsvc_testlock to take a host arg instead of calling
nlmsvc_lookup_host itself and change the callers to pass a pointer to
the nlm_host they've already found.

We take a reference to host in the place where nlmsvc_testlock()
previous did a new lookup, so the reference counting is unchanged from
before.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

Add /proc/fs/nfsd/unlock_filesystem, which allows e.g.:

shell> echo /mnt/sfs1 > /proc/fs/nfsd/unlock_filesystem

so that a filesystem can be unmounted before allowing a peer nfsd to
take over nfs service for the filesystem.
Signed-off-by: NS. Wendy Cheng <wcheng@redhat.com>
Cc: Lon Hohberger  <lhh@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

 fs/lockd/svcsubs.c          |   66 +++++++++++++++++++++++++++++++++++++++-----
 fs/nfsd/nfsctl.c            |   65 +++++++++++++++++++++++++++++++++++++++++++
 include/linux/lockd/lockd.h |    7 ++++
 3 files changed, 131 insertions(+), 7 deletions(-)

For high-availability NFS service, we generally need to be able to drop
file locks held on the exported filesystem before moving clients to a
new server.  Currently the only way to do that is by shutting down lockd
entirely, which is often undesireable (for example, if you want to
continue exporting other filesystems).

This patch allows the administrator to release all locks held by clients
accessing the client through a given server ip address, by echoing that
address to a new file, /proc/fs/nfsd/unlock_ip, as in:

shell> echo 10.1.1.2 > /proc/fs/nfsd/unlock_ip

The expected sequence of events can be:
1. Tear down the IP address
2. Unexport the path
3. Write IP to /proc/fs/nfsd/unlock_ip to unlock files
4. Signal peer to begin take-over.

For now we only support IPv4 addresses and NFSv2/v3 (NFSv4 locks are not
affected).

Also, if unmounting the filesystem is required, we assume at step 3 that
clients using the given server ip are the only clients holding locks on
the given filesystem; otherwise, an additional patch is required to
allow revoking all locks held by lockd on a given filesystem.
Signed-off-by: NS. Wendy Cheng <wcheng@redhat.com>
Cc: Lon Hohberger  <lhh@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

 fs/lockd/svcsubs.c          |   66 +++++++++++++++++++++++++++++++++++++++-----
 fs/nfsd/nfsctl.c            |   65 +++++++++++++++++++++++++++++++++++++++++++
 include/linux/lockd/lockd.h |    7 ++++
 3 files changed, 131 insertions(+), 7 deletions(-)

When we replace the existing synchronous RPC calls with asynchronous calls,
the reference count will be needed in order to allow us to examine the
result of the RPC call.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Clean-up: replace  __inline__ and use up-to-date function declaration
conventions.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Clean up: RPC protocol version numbers are u32.  Make sure we use an
appropriate type for NLM version numbers when calling nlm_lookup_host().

Eliminates a harmless mixed sign comparison in nlm_host_lookup().
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

According to The Open Group's NLM specification, NLM callers are variable
length strings.  XDR variable length strings use an unsigned 32 bit length.
And internally, negative string lengths are not meaningful for the Linux
NLM implementation.

Clean up: Make nlm_lock.len and nlm_reboot.len unsigned integers.  This
makes the sign of NLM string lengths consistent with the sign of xdr_netobj
lengths.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Acked-By: NNeilBrown <neilb@suse.de>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

Use the destination address of the original NLM request as the
source address in callbacks to the client.
Signed-off-by: NFrank van Maarseveen <frankvm@frankvm.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Change NLM internal interface to pass more information for test lock; we
need this to make sure the cookie information is pushed down to the place
where we do request deferral, which is handled for testlock by the
following patch.
Signed-off-by: NMarc Eshel <eshel@almaden.ibm.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

We need to keep some state for a pending asynchronous lock request, so this
patch adds that state to struct nlm_block.

This also adds a function which defers the request, by calling
rqstp->rq_chandle.defer and storing the resulting deferred request in a
nlm_block structure which we insert into lockd's global block list.  That
new function isn't called yet, so it's dead code until a later patch.
Signed-off-by: NMarc Eshel <eshel@almaden.ibm.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

NLM version 4 requests estimate the call and reply header sizes rather
conservatively, using the very maximum size allowed in the protocol even
though Linux always uses only a small fraction of the allowable space.

Reduce the size of caller and lock arguments to conserve RPC buffer space
while XDR encoding NLM4 arguments.  Add compile-time checks to ensure the
hostname string won't overflow NLM protocol maximums.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Annotated, all places switched to keeping status net-endian.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Acked-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NJosef Sipek <jsipek@fsl.cs.sunysb.edu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Make the following needlessly global functions static:

 - nlm_lookup_host()
 - nsm_find()
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Acked-by: NTrond Myklebust <trond.myklebust@fys.uio.no>
Acked-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Both the (recently introduces) nsm_sema and the older f_sema are converted
over.

Cc: Olaf Kirch <okir@suse.de>
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When we send a GRANTED_MSG call, we current copy the NLM cookie provided in
the original LOCK call - because in 1996, some broken clients seemed to rely
on this bug.  However, this means the cookies are not unique, so that when the
client's GRANTED_RES message comes back, we cannot simply match it based on
the cookie, but have to use the client's IP address in addition.  Which breaks
when you have a multi-homed NFS client.

The X/Open spec explicitly mentions that clients should not expect the same
cookie; so one may hope that any clients that were broken in 1996 have either
been fixed or rendered obsolete.
Signed-off-by: NOlaf Kirch <okir@suse.de>
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>