- 25 4月, 2018 2 次提交
-
-
由 Alexander Duyck 提交于
This change renames the fwd_priv member to accel_priv as this more accurately reflects the actual purpose of this value. In addition I am adding an accessor which will allow us to further abstract this in the future if needed. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
Drop the code for handling macvlan specific unicast lists. It isn't needed since we don't take any efforts to maintain it when we bring the interface up and it takes the slow path anyway. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 17 4月, 2018 4 次提交
-
-
由 Jesper Dangaard Brouer 提交于
Changing API ndo_xdp_xmit to take a struct xdp_frame instead of struct xdp_buff. This brings xdp_return_frame and ndp_xdp_xmit in sync. This builds towards changing the API further to become a bulk API, because xdp_buff is not a queue-able object while xdp_frame is. V4: Adjust for commit 59655a5b ("tuntap: XDP_TX can use native XDP") V7: Adjust for commit d9314c47 ("i40e: add support for XDP_REDIRECT") Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jesper Dangaard Brouer 提交于
Changing API xdp_return_frame() to take struct xdp_frame as argument, seems like a natural choice. But there are some subtle performance details here that needs extra care, which is a deliberate choice. When de-referencing xdp_frame on a remote CPU during DMA-TX completion, result in the cache-line is change to "Shared" state. Later when the page is reused for RX, then this xdp_frame cache-line is written, which change the state to "Modified". This situation already happens (naturally) for, virtio_net, tun and cpumap as the xdp_frame pointer is the queued object. In tun and cpumap, the ptr_ring is used for efficiently transferring cache-lines (with pointers) between CPUs. Thus, the only option is to de-referencing xdp_frame. It is only the ixgbe driver that had an optimization, in which it can avoid doing the de-reference of xdp_frame. The driver already have TX-ring queue, which (in case of remote DMA-TX completion) have to be transferred between CPUs anyhow. In this data area, we stored a struct xdp_mem_info and a data pointer, which allowed us to avoid de-referencing xdp_frame. To compensate for this, a prefetchw is used for telling the cache coherency protocol about our access pattern. My benchmarks show that this prefetchw is enough to compensate the ixgbe driver. V7: Adjust for commit d9314c47 ("i40e: add support for XDP_REDIRECT") V8: Adjust for commit bd658dda ("net/mlx5e: Separate dma base address and offset in dma_sync call") Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jesper Dangaard Brouer 提交于
Use the IDA infrastructure for getting a cyclic increasing ID number, that is used for keeping track of each registered allocator per RX-queue xdp_rxq_info. Instead of using the IDR infrastructure, which uses a radix tree, use a dynamic rhashtable, for creating ID to pointer lookup table, because this is faster. The problem that is being solved here is that, the xdp_rxq_info pointer (stored in xdp_buff) cannot be used directly, as the guaranteed lifetime is too short. The info is needed on a (potentially) remote CPU during DMA-TX completion time . In an xdp_frame the xdp_mem_info is stored, when it got converted from an xdp_buff, which is sufficient for the simple page refcnt based recycle schemes. For more advanced allocators there is a need to store a pointer to the registered allocator. Thus, there is a need to guard the lifetime or validity of the allocator pointer, which is done through this rhashtable ID map to pointer. The removal and validity of of the allocator and helper struct xdp_mem_allocator is guarded by RCU. The allocator will be created by the driver, and registered with xdp_rxq_info_reg_mem_model(). It is up-to debate who is responsible for freeing the allocator pointer or invoking the allocator destructor function. In any case, this must happen via RCU freeing. Use the IDA infrastructure for getting a cyclic increasing ID number, that is used for keeping track of each registered allocator per RX-queue xdp_rxq_info. V4: Per req of Jason Wang - Use xdp_rxq_info_reg_mem_model() in all drivers implementing XDP_REDIRECT, even-though it's not strictly necessary when allocator==NULL for type MEM_TYPE_PAGE_SHARED (given it's zero). V6: Per req of Alex Duyck - Introduce rhashtable_lookup() call in later patch V8: Address sparse should be static warnings (from kbuild test robot) Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jesper Dangaard Brouer 提交于
Extend struct ixgbe_tx_buffer to store the xdp_mem_info. Notice that this could be optimized further by putting this into a union in the struct ixgbe_tx_buffer, but this patchset works towards removing this again. Thus, this is not done. Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 3月, 2018 1 次提交
-
-
由 Joe Perches 提交于
Prefer the direct use of octal for permissions. Done with checkpatch -f --types=SYMBOLIC_PERMS --fix-inplace and some typing. Miscellanea: o Whitespace neatening around these conversions. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 3月, 2018 8 次提交
-
-
由 Björn Töpel 提交于
The current page counting scheme assumes that the reference count cannot decrease until the received frame is sent to the upper layers of the networking stack. This assumption does not hold for the XDP_REDIRECT action, since a page (pointed out by xdp_buff) can have its reference count decreased via the xdp_do_redirect call. To work around that, we now start off by a large page count and then don't allow a refcount less than two. Signed-off-by: NBjörn Töpel <bjorn.topel@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
Fix things up to support TSO offload in conjunction with IPsec hw offload. This raises throughput with IPsec offload on to nearly line rate. Signed-off-by: NShannon Nelson <shannon.nelson@oracle.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
There is no need to calculate the trailer length if we're doing a GSO/TSO, as there is no trailer added to the packet data. Also, don't bother clearing the flags field as it was already cleared earlier. Signed-off-by: NShannon Nelson <shannon.nelson@oracle.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
Since the ipsec data fields will be zero anyway in the non-ipsec case, we can remove the conditional jump. Suggested-by: NAlexander Duyck <alexander.duyck@gmail.com> Signed-off-by: NShannon Nelson <shannon.nelson@oracle.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
With the patch commit f8aa2696b4af ("esp: check the NETIF_F_HW_ESP_TX_CSUM bit before segmenting") we no longer need to protect ourself from checksum offload requests on IPsec packets, so we can remove the check in our .ndo_features_check callback. Signed-off-by: NShannon Nelson <shannon.nelson@oracle.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Paul Greenwalt 提交于
Replaced an assignment operation with an OR operation. The variable assignment was overwriting the value read from the PHY register. The OR operation sets only the intended register bits. The bits that were being overwritten are reserved, so the assignment had no functional impact. Reported by: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: NPaul Greenwalt <paul.greenwalt@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Paul Greenwalt 提交于
Add status register reads and delay between reads to ixgbe_check_remove. Registers can read 0xFFFFFFFF during PCI reset, which causes the driver to remove the adapter. The additional status register reads can reduce the chance of this race condition. If the status register is not 0xFFFFFFFF, then ixgbe_check_remove returns the value of the register being read. Signed-off-by: NPaul Greenwalt <paul.greenwalt@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jeff Kirsher 提交于
Add the SPDX identifiers to all the Intel wired LAN driver files, as outlined in Documentation/process/license-rules.rst. Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 3月, 2018 5 次提交
-
-
由 Paul Greenwalt 提交于
If port VLAN is enabled, set PFQDE.HIDE_VLAN during VF reset. Setting only PFQDE.PFQDE during VF reset was clearing PFQDE.HIDE_VLAN. Signed-off-by: NPaul Greenwalt <paul.greenwalt@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Tonghao Zhang 提交于
ixgbe enabled rlec counter and the rx_error used it. We can export the counter directly via ethtool -S ethX. Signed-off-by: NTonghao Zhang <xiangxia.m.yue@gmail.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
With commit 7f05b467 ("xfrm: check for xdo_dev_state_free") we no longer need to add an empty callback function to the driver, so now let's remove the useless code. Signed-off-by: NShannon Nelson <shannon.nelson@oracle.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
Fix up the Tx trailer length calculation. We can't believe the trailer len from the xstate information because it was calculated before the packet was put together and padding added. This bit of code finds the padding value in the trailer, adds it to the authentication length, and saves it so later we can put it into the Tx descriptor to tell the device where to stop the checksum calculation. Fixes: 59259470 ("ixgbe: process the Tx ipsec offload") Signed-off-by: NShannon Nelson <shannon.nelson@oracle.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
Make sure the Security Association is using a 128-bit authentication, since that's the only size that the hardware offload supports. Signed-off-by: NShannon Nelson <shannon.nelson@oracle.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 27 2月, 2018 4 次提交
-
-
由 Emil Tantilov 提交于
Add check for build_skb enabled ring in ixgbe_dma_sync_frag(). In that case &skb_shinfo(skb)->frags[0] may not always be set which can lead to a crash. Instead we derive the page offset from skb->data. Fixes: 42073d91 ("ixgbe: Have the CPU take ownership of the buffers sooner") CC: stable <stable@vger.kernel.org> Reported-by: NAmbarish Soman <asoman@redhat.com> Suggested-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jacob Keller 提交于
On hardware which supports timestamping all packets, the timestamps are recorded in the packet buffer, and the driver no longer uses or reads the registers. This makes the logic for checking and clearing Rx timestamp hangs meaningless. If we run the ixgbe_ptp_rx_hang() function in this case, then the driver will continuously spam the log output with "Clearing Rx timestamp hang". These messages are spurious, and confusing to end users. The original code in commit a9763f3c ("ixgbe: Update PTP to support X550EM_x devices", 2015-12-03) did have a flag PTP_RX_TIMESTAMP_IN_REGISTER which was intended to be used to avoid the Rx timestamp hang check, however it did not actually check the flag before calling the function. Do so now in order to stop the checks and prevent the spurious log messages. Fixes: a9763f3c ("ixgbe: Update PTP to support X550EM_x devices", 2015-12-03) Signed-off-by: NJacob Keller <jacob.e.keller@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Tonghao Zhang 提交于
If indir == 0 in the ixgbe_set_rxfh(), it is unnecessary to write the HW. Because redirection table is not changed. Signed-off-by: NTonghao Zhang <xiangxia.m.yue@gmail.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Colin Ian King 提交于
Variable pool is being assigned zero and then in the following for-loop is it being set to zero again. Remove the redundant first assignment. Cleans up clang warning: drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c:61:2: warning: Value stored to 'pool' is never read Signed-off-by: NColin Ian King <colin.king@canonical.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 27 1月, 2018 5 次提交
-
-
由 Emil Tantilov 提交于
commit 2de6aa3a ("ixgbe: Add support for padding packet") Uses RXDCTL.RLPML to limit the maximum frame size on Rx when using build_skb. Unfortunately that register does not work on 82599. Added an explicit check to avoid setting this register on 82599 MAC. Extended the comment related to the setting of RXDCTL.RLPML to better explain its purpose. Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Dan Carpenter 提交于
"offset" can't be both 0x0 and 0xFFFF so presumably || was intended instead of &&. That matches with how this check is done in other functions. Fixes: 73834aec ("ixgbe: extend firmware version support") Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Paul Greenwalt 提交于
Since 5G link speed is supported by some devices, add reporting of 5G link speed. Signed-off-by: NPaul Greenwalt <paul.greenwalt@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Miroslav Lichvar 提交于
The current code enables on X550 timestamping of all packets for any filter, which means ethtool should not report any PTP-specific filters as unsupported. Signed-off-by: NMiroslav Lichvar <mlichvar@redhat.com> Acked-by: NRichard Cochran <richardcochran@gmail.com> Acked-by: NJacob Keller <jacob.e.keller@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Colin Ian King 提交于
Use the ARRAY_SIZE macro on array buf to determine size of the array. Improvement suggested by coccinelle. Signed-off-by: NColin Ian King <colin.king@canonical.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 26 1月, 2018 1 次提交
-
-
由 Jakub Kicinski 提交于
Make use of tc_cls_can_offload_and_chain0() to set extack msg in case ethtool tc offload flag is not set or chain unsupported. Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: NSimon Horman <simon.horman@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 1月, 2018 10 次提交
-
-
由 Shannon Nelson 提交于
With all the support code in place we can now link in the ipsec offload operations and set the ESP feature flag for the XFRM subsystem to see. Signed-off-by: NShannon Nelson <shannon.nelson@oracle.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
Add a simple statistic to count the ipsec offloads. Signed-off-by: NShannon Nelson <shannon.nelson@oracle.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
If the skb has a security association referenced in the skb, then set up the Tx descriptor with the ipsec offload bits. While we're here, we fix an oddly named field in the context descriptor struct. Signed-off-by: NShannon Nelson <shannon.nelson@oracle.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
If the chip sees and decrypts an ipsec offload, set up the skb sp pointer with the ralated SA info. Since the chip is rude enough to keep to itself the table index it used for the decryption, we have to do our own table lookup, using the hash for speed. Signed-off-by: NShannon Nelson <shannon.nelson@oracle.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
On a chip reset most of the table contents are lost, so must be restored. This scans the driver's ipsec tables and restores both the filled and empty table slots to their pre-reset values. Signed-off-by: NShannon Nelson <shannon.nelson@oracle.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
Add the functions for setting up and removing offloaded SAs (Security Associations) with the x540 hardware. We set up the callback structure but we don't yet set the hardware feature bit to be sure the XFRM service won't actually try to use us for an offload yet. The software tables are made up to mimic the hardware tables to make it easier to track what's in the hardware, and the SA table index is used for the XFRM offload handle. However, there is a hashing field in the Rx SA tracking that will be used to facilitate faster table searches in the Rx fast path. Signed-off-by: NShannon Nelson <shannon.nelson@oracle.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
Set up the data structures to be used by the ipsec offload. Signed-off-by: NShannon Nelson <shannon.nelson@oracle.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
Add in the code for running and stopping the hardware ipsec encryption/decryption engine. It is good to keep the engine off when not in use in order to save on the power draw. Signed-off-by: NShannon Nelson <shannon.nelson@oracle.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
Add a few routines to make access to the ipsec registers just a little easier, and throw in the beginnings of an initialization. Signed-off-by: NShannon Nelson <shannon.nelson@oracle.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
Clean up the ipsec/macsec descriptor bit definitions to match the rest of the defines and file organization. Also recognise the bit-definition overlap in the error mask macro. Signed-off-by: NShannon Nelson <shannon.nelson@oracle.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-