- 08 8月, 2014 26 次提交
-
-
由 Miklos Szeredi 提交于
This flag gives CIFS the ability to support its native rename semantics. Implementation is simple: just bail out before trying to hack around the noreplace semantics. Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> Cc: Steve French <smfrench@gmail.com> Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Miklos Szeredi 提交于
Support RENAME_NOREPLACE and RENAME_EXCHANGE flags on hostfs if the underlying filesystem supports it. Since renameat2(2) is not yet in any libc, use syscall(2) to invoke the renameat2 syscall. Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> Cc: Richard Weinberger <richard@nod.at> Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Miklos Szeredi 提交于
This is really simple in tmpfs since the VFS already takes care of shuffling the dentries. Just adjust nlink on parent directories and touch c & mtimes. Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> Acked-by: NHugh Dickins <hughd@google.com> Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Miklos Szeredi 提交于
Implement ->rename2 instead of ->rename. Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> Acked-by: NHugh Dickins <hughd@google.com> Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Miklos Szeredi 提交于
RENAME_NOREPLACE is trivial to implement for most filesystems: switch over to ->rename2() and check for the supported flags. The rest is done by the VFS. Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> Cc: Chris Mason <clm@fb.com> Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Miklos Szeredi 提交于
so we return -EIO instead of -EINVAL. Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Miklos Szeredi 提交于
Christoph Hellwig suggests: 1) make vfs_rename call ->rename2 if it exists instead of ->rename 2) switch all filesystems that you're adding NOREPLACE support for to use ->rename2 3) see how many ->rename instances we'll have left after a few iterations of 2. Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Ionut Alexa 提交于
Signed-off-by: NIonut Alexa <ionut.m.alexa@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Rather than playing silly buggers with vfsmount refcounts, just have acct_on() ask fs/namespace.c for internal clone of file->f_path.mnt and replace it with said clone. Then attach the pin to original vfsmount. Voila - the clone will be alive until the file gets closed, making sure that underlying superblock remains active, etc., and we can drop the original vfsmount, so that it's not kept busy. If the file lives until the final mntput of the original vfsmount, we'll notice that there's an fs_pin (one in bsd_acct_struct that holds that file) and mnt_pin_kill() will take it out. Since ->kill() is synchronous, we won't proceed past that point until these files are closed (and private clones of our vfsmount are gone), so we get the same ordering warranties we used to get. mnt_pin()/mnt_unpin()/->mnt_pinned is gone now, and good riddance - it never became usable outside of kernel/acct.c (and racy wrt umount even there). Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
These externs belong in fs/internal.h. Rename (they are not acct-specific anymore) and move them over there. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Add a new field to fs_pin - kill(pin). That's what umount and r/o remount will be calling for all pins attached to vfsmount and superblock resp. Called after bumping the refcount, so it won't go away under us. Dropping the refcount is responsibility of the instance. All generic stuff moved to fs/fs_pin.c; the next step will rip all the knowledge of kernel/acct.c from fs/super.c and fs/namespace.c. After that - death to mnt_pin(); it was intended to be usable as generic mechanism for code that wants to attach objects to vfsmount, so that they would not make the sucker busy and would get killed on umount. Never got it right; it remained acct.c-specific all along. Now it's very close to being killable. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
pull generic parts into struct fs_pin. Eventually we want those to replace mnt_pin()/mnt_unpin() mess; that stuff will move to fs/*. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Do actual closing of file via schedule_work(). And use __fput_sync() there. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
just repeat the frozen check after regaining it, and check that sb is still alive. If several threads hit acct_auto_close() at the same time, acct_auto_close() will survive that just fine. And we really don't want to play with writes and closing the file with ->s_umount held exclusive - it's a deadlock country. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
* make acct->count atomic and acct freeing - rcu-delayed. * instead of grabbing acct_lock around the places where we take a reference, do that under rcu_read_lock() with atomic_long_inc_not_zero(). * have the new acct locked before making ns->bacct point to it Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Put these suckers on per-vfsmount and per-superblock lists instead. Note: right now it's still acct_lock for everything, but that's going to change. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
a) file can't be NULL b) file can't be changed under us c) all writes are serialized by acct->lock; no need to mess with spinlock there. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Do not reuse bsd_acct_struct after closing the damn thing. Structure lifetime is controlled by refcount now. We also have a mutex in there, held over closing and writing (the file is O_APPEND, so we are not losing any concurrency). As the result, we do not need to bother with get_file()/fput() on log write anymore. Moreover, do_acct_process() only needs acct itself; file and pidns are picked from it. Killed instances are distinguished by having NULL ->ns. Refcount is protected by acct_lock; anybody taking the mutex needs to grab a reference first. The things will get a lot simpler in the next commits - this is just the minimal chunk switching to the new lifetime rules. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
brute-force - on a global mutex that isn't nested into anything. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
We need to check free space on the first write to freshly opened log. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
There was an amusing bogosity in ac_rw calculation - it tried to do encode_comp_t(encode_comp_t(0) / 1024). Seeing that comp_t is a 3-bit exponent + 13-bit mantissa... it's a good thing that 0 is represented by all-bits-clear. The history of that one is interesting - it was introduced in 2.1.68pre1, when acct.c had been reworked and moved to separate file. Two months later (2.1.86) somebody has noticed that the sucker won't compile - there was no task_struct::io_usage. At which point the ac_io calculation had changed from encode_comp_t(current->io_usage) to encode_comp_t(0) and the bug in the next line (absolutely real back then, had it ever managed to compile) become a harmless bogosity. Looks like nobody has ever noticed until now. Anyway, let's bury that idiocy now that it got noticed. 17 years is long enough... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
backmerge to avoid kernel/acct.c conflict
-
- 04 8月, 2014 2 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull timer fixes from Thomas Gleixner: "Two fixes in the timer area: - a long-standing lock inversion due to a printk - suspend-related hrtimer corruption in sched_clock" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timer: Fix lock inversion between hrtimer_bases.lock and scheduler locks sched_clock: Avoid corrupting hrtimer tree during suspend
-
- 03 8月, 2014 1 次提交
-
-
git://ftp.arm.linux.org.uk/~rmk/linux-arm由 Linus Torvalds 提交于
Pull ARM fixes from Russell King: "A few fixes for ARM. Some of these are correctness issues: - TLBs must be flushed after the old mappings are removed by the DMA mapping code, but before the new mappings are established. - An off-by-one entry error in the Keystone LPAE setup code. Fixes include: - ensuring that the identity mapping for LPAE does not remove the kernel image from the identity map. - preventing userspace from trapping into kgdb. - fixing a preemption issue in the Intel iwmmxt code. - fixing a build error with nommu. Other changes include: - Adding a note about which areas of memory are expected to be accessible while the identity mapping tables are in place" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8124/1: don't enter kgdb when userspace executes a kgdb break instruction ARM: idmap: add identity mapping usage note ARM: 8115/1: LPAE: reduce damage caused by idmap to virtual memory layout ARM: fix alignment of keystone page table fixup ARM: 8112/1: only select ARM_PATCH_PHYS_VIRT if MMU is enabled ARM: 8100/1: Fix preemption disable in iwmmxt_task_enable() ARM: DMA: ensure that old section mappings are flushed from the TLB
-
- 02 8月, 2014 9 次提交
-
-
由 Omar Sandoval 提交于
The kgdb breakpoint hooks (kgdb_brk_fn and kgdb_compiled_brk_fn) should only be entered when a kgdb break instruction is executed from the kernel. Otherwise, if kgdb is enabled, a userspace program can cause the kernel to drop into the debugger by executing either KGDB_BREAKINST or KGDB_COMPILED_BREAK. Acked-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NOmar Sandoval <osandov@osandov.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Add a note about the usage of the identity mapping; we do not support accesses outside of the identity map region and kernel image while a CPU is using the identity map. This is because the identity mapping may overwrite vmalloc space, IO mappings, the vectors pages, etc. Acked-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull vfs fixes from Al Viro: "This contains a couple of fixes - one is the aio fix from Christoph, the other a fallocate() one from Eric" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: vfs: fix check for fallocate on active swapfile direct-io: fix AIO regression
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fix from Peter Anvin: "A single fix to not invoke the espfix code on Xen PV, as it turns out to oops the guest when invoked after all. This patch leaves some amount of dead code, in particular unnecessary initialization of the espfix stacks when they won't be used, but in the interest of keeping the patch minimal that cleanup can wait for the next cycle" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86_64/entry/xen: Do not invoke espfix64 on Xen
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging由 Linus Torvalds 提交于
Pull staging driver bugfixes from Greg KH: "Here are some tiny staging driver bugfixes that I've had in my tree for the past week that resolve some reported issues. Nothing major at all, but it would be good to get them merged for 3.16-rc8 or -final" * tag 'staging-3.16-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: vt6655: Fix disassociated messages every 10 seconds staging: vt6655: Fix Warning on boot handle_irq_event_percpu. staging: rtl8723au: rtw_resume(): release semaphore before exit on error iio:bma180: Missing check for frequency fractional part iio:bma180: Fix scale factors to report correct acceleration units iio: buffer: Fix demux table creation
-
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm由 Linus Torvalds 提交于
Pull device mapper fixes from Mike Snitzer: "Fix dm bufio shrinker to properly zero-fill all fields. Fix race in dm cache that caused improper reporting of the number of dirty blocks in the cache" * tag 'dm-3.16-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm cache: fix race affecting dirty block count dm bufio: fully initialize shrinker
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM straggler SoC fix from Olof Johansson: "A DT bugfix for Nomadik that had an ambigouos double-inversion of a gpio line, and one MAINTAINER URL update that might as well go in now. We could hold off until the merge window, but then we'll just have to mark the DT fix for stable and it just seems like in total causing more work" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: MAINTAINERS: Update Tegra Git URL ARM: nomadik: fix up double inversion in DT
-
由 Anssi Hannula 提交于
nr_dirty is updated without locking, causing it to drift so that it is non-zero (either a small positive integer, or a very large one when an underflow occurs) even when there are no actual dirty blocks. This was due to a race between the workqueue and map function accessing nr_dirty in parallel without proper protection. People were seeing under runs due to a race on increment/decrement of nr_dirty, see: https://lkml.org/lkml/2014/6/3/648 Fix this by using an atomic_t for nr_dirty. Reported-by: roma1390@gmail.com Signed-off-by: NAnssi Hannula <anssi.hannula@iki.fi> Signed-off-by: NJoe Thornber <ejt@redhat.com> Signed-off-by: NMike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org
-
由 Greg Thelen 提交于
1d3d4437 ("vmscan: per-node deferred work") added a flags field to struct shrinker assuming that all shrinkers were zero filled. The dm bufio shrinker is not zero filled, which leaves arbitrary kmalloc() data in flags. So far the only defined flags bit is SHRINKER_NUMA_AWARE. But there are proposed patches which add other bits to shrinker.flags (e.g. memcg awareness). Rather than simply initializing the shrinker, this patch uses kzalloc() when allocating the dm_bufio_client to ensure that the embedded shrinker and any other similar structures are zeroed. This fixes theoretical over aggressive shrinking of dm bufio objects. If the uninitialized dm_bufio_client.shrinker.flags contains SHRINKER_NUMA_AWARE then shrink_slab() would call the dm shrinker for each numa node rather than just once. This has been broken since 3.12. Signed-off-by: NGreg Thelen <gthelen@google.com> Acked-by: NMikulas Patocka <mpatocka@redhat.com> Signed-off-by: NMike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org # v3.12+
-
- 01 8月, 2014 2 次提交
-
-
由 Jan Kara 提交于
clockevents_increase_min_delta() calls printk() from under hrtimer_bases.lock. That causes lock inversion on scheduler locks because printk() can call into the scheduler. Lockdep puts it as: ====================================================== [ INFO: possible circular locking dependency detected ] 3.15.0-rc8-06195-g939f04be #2 Not tainted ------------------------------------------------------- trinity-main/74 is trying to acquire lock: (&port_lock_key){-.....}, at: [<811c60be>] serial8250_console_write+0x8c/0x10c but task is already holding lock: (hrtimer_bases.lock){-.-...}, at: [<8103caeb>] hrtimer_try_to_cancel+0x13/0x66 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #5 (hrtimer_bases.lock){-.-...}: [<8104a942>] lock_acquire+0x92/0x101 [<8142f11d>] _raw_spin_lock_irqsave+0x2e/0x3e [<8103c918>] __hrtimer_start_range_ns+0x1c/0x197 [<8107ec20>] perf_swevent_start_hrtimer.part.41+0x7a/0x85 [<81080792>] task_clock_event_start+0x3a/0x3f [<810807a4>] task_clock_event_add+0xd/0x14 [<8108259a>] event_sched_in+0xb6/0x17a [<810826a2>] group_sched_in+0x44/0x122 [<81082885>] ctx_sched_in.isra.67+0x105/0x11f [<810828e6>] perf_event_sched_in.isra.70+0x47/0x4b [<81082bf6>] __perf_install_in_context+0x8b/0xa3 [<8107eb8e>] remote_function+0x12/0x2a [<8105f5af>] smp_call_function_single+0x2d/0x53 [<8107e17d>] task_function_call+0x30/0x36 [<8107fb82>] perf_install_in_context+0x87/0xbb [<810852c9>] SYSC_perf_event_open+0x5c6/0x701 [<810856f9>] SyS_perf_event_open+0x17/0x19 [<8142f8ee>] syscall_call+0x7/0xb -> #4 (&ctx->lock){......}: [<8104a942>] lock_acquire+0x92/0x101 [<8142f04c>] _raw_spin_lock+0x21/0x30 [<81081df3>] __perf_event_task_sched_out+0x1dc/0x34f [<8142cacc>] __schedule+0x4c6/0x4cb [<8142cae0>] schedule+0xf/0x11 [<8142f9a6>] work_resched+0x5/0x30 -> #3 (&rq->lock){-.-.-.}: [<8104a942>] lock_acquire+0x92/0x101 [<8142f04c>] _raw_spin_lock+0x21/0x30 [<81040873>] __task_rq_lock+0x33/0x3a [<8104184c>] wake_up_new_task+0x25/0xc2 [<8102474b>] do_fork+0x15c/0x2a0 [<810248a9>] kernel_thread+0x1a/0x1f [<814232a2>] rest_init+0x1a/0x10e [<817af949>] start_kernel+0x303/0x308 [<817af2ab>] i386_start_kernel+0x79/0x7d -> #2 (&p->pi_lock){-.-...}: [<8104a942>] lock_acquire+0x92/0x101 [<8142f11d>] _raw_spin_lock_irqsave+0x2e/0x3e [<810413dd>] try_to_wake_up+0x1d/0xd6 [<810414cd>] default_wake_function+0xb/0xd [<810461f3>] __wake_up_common+0x39/0x59 [<81046346>] __wake_up+0x29/0x3b [<811b8733>] tty_wakeup+0x49/0x51 [<811c3568>] uart_write_wakeup+0x17/0x19 [<811c5dc1>] serial8250_tx_chars+0xbc/0xfb [<811c5f28>] serial8250_handle_irq+0x54/0x6a [<811c5f57>] serial8250_default_handle_irq+0x19/0x1c [<811c56d8>] serial8250_interrupt+0x38/0x9e [<810510e7>] handle_irq_event_percpu+0x5f/0x1e2 [<81051296>] handle_irq_event+0x2c/0x43 [<81052cee>] handle_level_irq+0x57/0x80 [<81002a72>] handle_irq+0x46/0x5c [<810027df>] do_IRQ+0x32/0x89 [<8143036e>] common_interrupt+0x2e/0x33 [<8142f23c>] _raw_spin_unlock_irqrestore+0x3f/0x49 [<811c25a4>] uart_start+0x2d/0x32 [<811c2c04>] uart_write+0xc7/0xd6 [<811bc6f6>] n_tty_write+0xb8/0x35e [<811b9beb>] tty_write+0x163/0x1e4 [<811b9cd9>] redirected_tty_write+0x6d/0x75 [<810b6ed6>] vfs_write+0x75/0xb0 [<810b7265>] SyS_write+0x44/0x77 [<8142f8ee>] syscall_call+0x7/0xb -> #1 (&tty->write_wait){-.....}: [<8104a942>] lock_acquire+0x92/0x101 [<8142f11d>] _raw_spin_lock_irqsave+0x2e/0x3e [<81046332>] __wake_up+0x15/0x3b [<811b8733>] tty_wakeup+0x49/0x51 [<811c3568>] uart_write_wakeup+0x17/0x19 [<811c5dc1>] serial8250_tx_chars+0xbc/0xfb [<811c5f28>] serial8250_handle_irq+0x54/0x6a [<811c5f57>] serial8250_default_handle_irq+0x19/0x1c [<811c56d8>] serial8250_interrupt+0x38/0x9e [<810510e7>] handle_irq_event_percpu+0x5f/0x1e2 [<81051296>] handle_irq_event+0x2c/0x43 [<81052cee>] handle_level_irq+0x57/0x80 [<81002a72>] handle_irq+0x46/0x5c [<810027df>] do_IRQ+0x32/0x89 [<8143036e>] common_interrupt+0x2e/0x33 [<8142f23c>] _raw_spin_unlock_irqrestore+0x3f/0x49 [<811c25a4>] uart_start+0x2d/0x32 [<811c2c04>] uart_write+0xc7/0xd6 [<811bc6f6>] n_tty_write+0xb8/0x35e [<811b9beb>] tty_write+0x163/0x1e4 [<811b9cd9>] redirected_tty_write+0x6d/0x75 [<810b6ed6>] vfs_write+0x75/0xb0 [<810b7265>] SyS_write+0x44/0x77 [<8142f8ee>] syscall_call+0x7/0xb -> #0 (&port_lock_key){-.....}: [<8104a62d>] __lock_acquire+0x9ea/0xc6d [<8104a942>] lock_acquire+0x92/0x101 [<8142f11d>] _raw_spin_lock_irqsave+0x2e/0x3e [<811c60be>] serial8250_console_write+0x8c/0x10c [<8104e402>] call_console_drivers.constprop.31+0x87/0x118 [<8104f5d5>] console_unlock+0x1d7/0x398 [<8104fb70>] vprintk_emit+0x3da/0x3e4 [<81425f76>] printk+0x17/0x19 [<8105bfa0>] clockevents_program_min_delta+0x104/0x116 [<8105c548>] clockevents_program_event+0xe7/0xf3 [<8105cc1c>] tick_program_event+0x1e/0x23 [<8103c43c>] hrtimer_force_reprogram+0x88/0x8f [<8103c49e>] __remove_hrtimer+0x5b/0x79 [<8103cb21>] hrtimer_try_to_cancel+0x49/0x66 [<8103cb4b>] hrtimer_cancel+0xd/0x18 [<8107f102>] perf_swevent_cancel_hrtimer.part.60+0x2b/0x30 [<81080705>] task_clock_event_stop+0x20/0x64 [<81080756>] task_clock_event_del+0xd/0xf [<81081350>] event_sched_out+0xab/0x11e [<810813e0>] group_sched_out+0x1d/0x66 [<81081682>] ctx_sched_out+0xaf/0xbf [<81081e04>] __perf_event_task_sched_out+0x1ed/0x34f [<8142cacc>] __schedule+0x4c6/0x4cb [<8142cae0>] schedule+0xf/0x11 [<8142f9a6>] work_resched+0x5/0x30 other info that might help us debug this: Chain exists of: &port_lock_key --> &ctx->lock --> hrtimer_bases.lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(hrtimer_bases.lock); lock(&ctx->lock); lock(hrtimer_bases.lock); lock(&port_lock_key); *** DEADLOCK *** 4 locks held by trinity-main/74: #0: (&rq->lock){-.-.-.}, at: [<8142c6f3>] __schedule+0xed/0x4cb #1: (&ctx->lock){......}, at: [<81081df3>] __perf_event_task_sched_out+0x1dc/0x34f #2: (hrtimer_bases.lock){-.-...}, at: [<8103caeb>] hrtimer_try_to_cancel+0x13/0x66 #3: (console_lock){+.+...}, at: [<8104fb5d>] vprintk_emit+0x3c7/0x3e4 stack backtrace: CPU: 0 PID: 74 Comm: trinity-main Not tainted 3.15.0-rc8-06195-g939f04be #2 00000000 81c3a310 8b995c14 81426f69 8b995c44 81425a99 8161f671 8161f570 8161f538 8161f559 8161f538 8b995c78 8b142bb0 00000004 8b142fdc 8b142bb0 8b995ca8 8104a62d 8b142fac 000016f2 81c3a310 00000001 00000001 00000003 Call Trace: [<81426f69>] dump_stack+0x16/0x18 [<81425a99>] print_circular_bug+0x18f/0x19c [<8104a62d>] __lock_acquire+0x9ea/0xc6d [<8104a942>] lock_acquire+0x92/0x101 [<811c60be>] ? serial8250_console_write+0x8c/0x10c [<811c6032>] ? wait_for_xmitr+0x76/0x76 [<8142f11d>] _raw_spin_lock_irqsave+0x2e/0x3e [<811c60be>] ? serial8250_console_write+0x8c/0x10c [<811c60be>] serial8250_console_write+0x8c/0x10c [<8104af87>] ? lock_release+0x191/0x223 [<811c6032>] ? wait_for_xmitr+0x76/0x76 [<8104e402>] call_console_drivers.constprop.31+0x87/0x118 [<8104f5d5>] console_unlock+0x1d7/0x398 [<8104fb70>] vprintk_emit+0x3da/0x3e4 [<81425f76>] printk+0x17/0x19 [<8105bfa0>] clockevents_program_min_delta+0x104/0x116 [<8105cc1c>] tick_program_event+0x1e/0x23 [<8103c43c>] hrtimer_force_reprogram+0x88/0x8f [<8103c49e>] __remove_hrtimer+0x5b/0x79 [<8103cb21>] hrtimer_try_to_cancel+0x49/0x66 [<8103cb4b>] hrtimer_cancel+0xd/0x18 [<8107f102>] perf_swevent_cancel_hrtimer.part.60+0x2b/0x30 [<81080705>] task_clock_event_stop+0x20/0x64 [<81080756>] task_clock_event_del+0xd/0xf [<81081350>] event_sched_out+0xab/0x11e [<810813e0>] group_sched_out+0x1d/0x66 [<81081682>] ctx_sched_out+0xaf/0xbf [<81081e04>] __perf_event_task_sched_out+0x1ed/0x34f [<8104416d>] ? __dequeue_entity+0x23/0x27 [<81044505>] ? pick_next_task_fair+0xb1/0x120 [<8142cacc>] __schedule+0x4c6/0x4cb [<81047574>] ? trace_hardirqs_off_caller+0xd7/0x108 [<810475b0>] ? trace_hardirqs_off+0xb/0xd [<81056346>] ? rcu_irq_exit+0x64/0x77 Fix the problem by using printk_deferred() which does not call into the scheduler. Reported-by: NFengguang Wu <fengguang.wu@intel.com> Signed-off-by: NJan Kara <jack@suse.cz> Cc: stable@vger.kernel.org Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Eric Biggers 提交于
Fix the broken check for calling sys_fallocate() on an active swapfile, introduced by commit 0790b31b ("fs: disallow all fallocate operation on active swapfile"). Signed-off-by: NEric Biggers <ebiggers3@gmail.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-