Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

This patch moves SoC header files for supporting each SoCs to
plat-samsung directory. This is required to make one plat-
directory for Samsung SoCs.

Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Removed
- arch/arm/plat-s3c24xx/include/plat/pll.h
- arch/arm/mach-s3c64xx/include/mach/pll.h
- arch/arm/plat-s5p/include/plat/pll.h
- arch/arm/plat-samsung/include/plat/pll6553x.h

And created
- arch/arm/plat-samsung/include/plat/pll.h

Cc: Ben Dooks <ben-linux@fluff.org>
[kgene.kim@samsung.com: changed title]
[kgene.kim@samsung.com: fixed conflicts in plat-s5p/include/pll.h]
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Removed
 - arch/arm/plat-s3c24xx/include/mach/pwm-clock.h
 - arch/arm/mach-s3c64xx/include/mach/pwm-clock.h
 - arch/arm/mach-s5p64x0/include/mach/pwm-clock.h
 - arch/arm/mach-s5pc100/include/mach/pwm-clock.h
 - arch/arm/mach-s5pv210/include/mach/pwm-clock.h
 - arch/arm/mach-exynos4/include/mach/pwm-clock.h

And created
 - arch/arm/plat-samsung/include/plat/pwm-clock.h

Cc: Ben Dooks <ben-linux@fluff.org>
[kgene.kim@samsung.com: changed title]
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

According to commit a3831cf ("ARM: Consolidate the
clkdev header files"), current mach/clkdev.h is no
needed in Samsung stuff.

Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Some platforms (like OMAP not to name it) are doing rather complicated
hacks just to determine the base UART address to use.  Let's give their
addruart macro some slack by providing an extra work register which will
allow for much needed cleanups.

This is basically a no-op as this commit is only adding the extra argument
to the macro but no one is using it yet.
Signed-off-by: Nnicolas Pitre <nicolas.pitre@linaro.org>
Reviewed-by: NKevin Hilman <khilman@ti.com>

According to gpio-samsung.c, this patch updates the name of
regarding Samsung GPIO. Basically the samsung_xxx prefix is
used in gpio-samsung.c instead of s3c_xxx, because unified
name can reduce its complexity.

Note: some s3c_xxx stil remains because it is used widely.
It will be updated next time.

Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Some boards based on S3C6410 use synchronous clocking, which means that HCLKx2
and other system clocks are generated from APLL instead of MPLL.

This patch adds support for such boards, by calculating hclk2 depending on
the status of S3C_OTHERS_SYNCMUXSEL bit in S3C64XX_OTHERS regist
Signed-off-by: NTomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch adds a definition of S3C64XX_SDMA_SEL register and modifies
the s3c64xx DMA driver to use it instead of a magic register address.
Signed-off-by: NTomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

The Cragganmore system is modular with I2C based identification chips on
the system allowing identification of the system build. Provide a stub I2C
driver which parses the module IDs and uses them to select the appropriate
audio subsystem components to register. To avoid confusion due to having
the mini-driver in the system the driver is placed in a separate file.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This is required to work consolidation Samsung platform.

Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch removes the samsung specific enum type 's3c2410_dmasrc'
and uses 'dma_data_direction' instead.
Signed-off-by: NBoojin Kim <boojin.kim@samsung.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

This patch adds to support the DMA PL330 driver that uses
DMA generic API. Samsung sound driver uses DMA generic API
if architecture supports it. Otherwise, use samsung specific
S3C-PL330 API driver to transfer PCM data.
Signed-off-by: NBoojin Kim <boojin.kim@samsung.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Cc: Jassi Brar <jassisinghbrar@gmail.com>
Cc: Liam Girdwood <lrg@ti.com>
Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
[kgene.kim@samsung.com: removed useless variable]
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

This patch adds common DMA operations which are used for Samsung DMA
drivers. Currently there are two types of DMA driver for Samsung SoCs.
The one is S3C-DMA for S3C SoCs and the other is PL330-DMA for S5P SoCs.
This patch provides funcion pointers for common DMA operations to DMA
client driver like SPI and Audio. It makes DMA client drivers support
multi-platform.
In addition, this common DMA operations implement the shared actions
that are needed for DMA client driver. For example shared actions are
filter() function for dma_request_channel() and parameter passing for
device_prep_slave_sg().
Signed-off-by: NBoojin Kim <boojin.kim@samsung.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

With uart tx/rx/err interrupt handling moved into the driver for s3c64xx
and later SoC's, the uart interrupt handling in plaform code can be removed.
The uart device irq resources is reduced to one and the related unused
macros are removed.
Suggested-by: NGrant Likely <grant.likely@secretlab.ca>
CC: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NJon Medhurst <tixy@yxit.co.uk>
CC: Ben Dooks <ben-linux@fluff.org>

Rather than marking the mach/gpio.h header files which want to use the
trivial GPIOLIB implementation, mark those which do not want to use it
instead.  This means that by default, you get the trivial implementation
and only have to do something extra if you need to.  This should
encourage the use of the trivial default implementation.

As an additional bonus, several gpio.h header files become empty.
Acked-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Tested-by: NJamie Iles <jamie@jamieiles.com>
Acked-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Many of the gpio_to_irq implementations use the gpiolib version of this
function.  Provide the standard gpiolib gpio_to_irq() for everyone, but
allow platforms to override it if they wish.  Add the neccessary
overrides for those platforms which do not use the standard definition.
Acked-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Consolidate 24 trivial gpiolib implementions out of mach/gpio.h
into asm/gpio.h.  This is basically the include of asm-generic/gpio.h
and the definition of gpio_get_value, gpio_set_value, and gpio_cansleep
as described in Documentation/gpio.txt
Acked-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Tested-by: NDavid Brown <davidb@codeaurora.org>
Acked-by: NDavid Brown <davidb@codeaurora.org>
Tested-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NKukjin Kim <kgene.kim@samsung.com>
Tested-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

To handle i2s0 interrupt and To fix compilation error
adds IRQ_I2S0 for exynos4, s3c64xx, s5p64x0
Signed-off-by: NSangbeom Kim <sbkim73@samsung.com>
[kgene.kim@samsung.com: Fixed build failure due to inclusion]
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Use plat/regs-fb-v4.h in machine files instead of mach/regs-fb.h.
Signed-off-by: NAjay Kumar <ajaykumar.rs@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This is temporary patch for building with clkdev.
Signed-off-by: NThomas Abraham <thomas.ab@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

The Cragganmore carrier card and Banff CPU module are used on Wolfson
Microelectronics reference systems.  This initial support covers the
core system which is a fairly generic S3C6410 based design, further
patches will add support for the key features of the reference system.

The initial board bringup and therefore much of the key code was done by
Ben Dooks for Simtec, with additional work (especially around the
integration of the Wolfson devices) being done by myself.
Signed-off-by: NBen Dooks <ben@simtec.co.uk>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
[kgene.kim@samsung.com: removed inclusion of <mach/regs-fb.h>]
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Add a callback so that per-arch can do pre-sleep and post-resume
gpio configuration so that for the S3C64XX, the GPIO configuration
is restored before the sleep mode is cleared.

For the S3C64XX case, it means that the GPIOs get set back to normal
operation after the restore code puts the original configurations
back in after the
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Any interrupts based off either of the onboard VICs cannot be resumed
from any more as it seems set_irq_wake() is now checking the error code
returned from the low level handlers and not setting the wake-state on
the interrupt if this fails.

Ensure that we make the interrupts we can resume from available on the
VIC and then do a pre-sleep mask of all the VIC interrupts as the wakeup
is handled by a seperate block.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

The gpio-bank-X header files of S3C64XX have definitions
which can be substituted by other common GPIO API.
Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This uncouple PHYS_OFFSET from the platform definitions, thereby
facilitating run-time computation of the physical memory offset.
Acked-by: NNicolas Pitre <nicolas.pitre@linaro.org>
Acked-by: NViresh Kumar <viresh.kumar@st.com>
Acked-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: NMagnus Damm <damm@opensource.se>
Acked-by: NTony Lindgren <tony@atomide.com>
Acked-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: NWan ZongShun <mcuos.com@gmail.com>
Acked-by: NKukjin Kim <kgene.kim@samsung.com>
Acked-by: NEric Miao <eric.y.miao@gmail.com>
Acked-by: NJiandong Zheng <jdzheng@broadcom.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This patch changes VMALLOC_END from 0xE0000000 to 0xF6000000, because
some systems want to use more vmalloc()/ioremap() area and now don't use
from at 0xE0000000 to 0xF6000000 (the start of Samsung SoCs' VA space)

Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Rather than checking the MMU status in every instance of addruart, do it
once in kernel/debug.S, and change the existing addruart macros to
return both physical and virtual addresses. The main debug code can then
select the appropriate address to use.

This will also allow us to retreive the address of a uart for the MMU
state that we're not current in.

Updated with fixes for OMAP from Jason Wang <jason77.wang@gmail.com>
and Tony Lindgren <tony@atomide.com>, and fix for versatile express from
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>.
Signed-off-by: NJeremy Kerr <jeremy.kerr@canonical.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: NJason Wang <jason77.wang@gmail.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Tested-by: NKevin Hilman <khilman@deeprootsystems.com>

Fix this warning:

arch/arm/mm/init.c: In function 'mem_init':
arch/arm/mm/init.c:644: warning: format '%08lx' expects type
'long unsigned int', but argument 12 has type 'unsigned int'

And removes the useless parens and white space.
Reported-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
Cc: Ben Dooks <ben-linux@fluff.org>

Change the area available for consitent DMA allocations from the
default to 8MiB to allow drivers such as the framebuffer to get
more memory (for situations where larger virtual screen resolutions
are needed).
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Remove the various header files that configure this driver and use the
platform device name to select the correct configuration at probe time.

Currently this does not remove the header files, only updates the driver
and the relevant platform files.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NPawel Osciak <p.osciak@samsung.com>
Cc: InKi Dae <inki.dae@samsung.com>
Cc: KyungMin Park <kyungmin.park.samsung.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch is to support keypad device to the SMDK6410 board.
Signed-off-by: NNaveen Krishna Ch <ch.naveen@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Following is added for the CF-ATA driver:
	- Platform data strucure instantiation
	- Platform device enabling code
	- Addition of cfcon clock
	- Platform-specific gpio setup code
Signed-off-by: NAbhilash Kesavan <a.kesavan@samsung.com>
Signed-off-by: NThomas Abraham <thomas.ab@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch adds support for Watchdog timer for Samsung S3C6410
Signed-off-by: NBanajit Goswami <banajit.g@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

This patch adds setup code for Samsung OneNAND controller driver. The
driver needs to be aware on which SoC it is running, so the actual
device id is being changed in cpu init code. S3C64xx SoCs have 2 OneNAND
controllers while S5PC100 and S5PC110 has only one.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
[ben-linux@fluff.org: sort map.h entries]
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

This patch moves RTC device definitions from mach-s3c64xx
to plat-samsung, to enable the other SoCs to use same device
definition.
Signed-off-by: NAtul Dahiya <atul.dahiya@samsung.com>
Signed-off-by: NSangbeom Kim <sbkim73@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

This patch moves ADC device definition to plat-samsung.
Because that is generic to the S3C64XX and S5P Series SoCs.
Signed-off-by: NNaveen Krishna Ch <ch.naveen@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Define S3C6410 specific register - CLK_SRC2
Signed-off-by: NJassi Brar <jassi.brar@samsung.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

The S3C6400 EPLL code matches the S3C2416 and compatible SoCs, so move
it from mach-s3c64xx into <plat/pll.h> for easy reuse.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>