Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
提交 2a8d7bdd 编写于 作者: T Thomas Abraham 提交者： Greg Kroah-Hartman
浏览文件
操作

ARM: SAMSUNG: Remove uart irq handling from plaform code 

With uart tx/rx/err interrupt handling moved into the driver for s3c64xx
and later SoC's, the uart interrupt handling in plaform code can be removed.
The uart device irq resources is reduced to one and the related unused
macros are removed.
Suggested-by: NGrant Likely <grant.likely@secretlab.ca>
CC: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
上级 88bb4ea1
隐藏空白更改
内联 并排
Showing with 25 addition and 352 deletion
arch/arm/Kconfig
浏览文件 @ 2a8d7bdd
......@@ -722,7 +722,6 @@ config ARCH_S3C64XX
select ARCH_REQUIRE_GPIOLIB
select SAMSUNG_CLKSRC
select SAMSUNG_IRQ_VIC_TIMER
select SAMSUNG_IRQ_UART
select S3C_GPIO_TRACK
select S3C_GPIO_PULL_UPDOWN
select S3C_GPIO_CFG_S3C24XX
......
arch/arm/mach-s3c64xx/dev-uart.c
浏览文件 @ 2a8d7bdd
......@@ -37,21 +37,10 @@ static struct resource s3c64xx_uart0_resource[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_S3CUART_RX0,
.end = IRQ_S3CUART_RX0,
.start = IRQ_UART0,
.end = IRQ_UART0,
.flags = IORESOURCE_IRQ,
},
[2] = {
.start = IRQ_S3CUART_TX0,
.end = IRQ_S3CUART_TX0,
.flags = IORESOURCE_IRQ,
},
[3] = {
.start = IRQ_S3CUART_ERR0,
.end = IRQ_S3CUART_ERR0,
.flags = IORESOURCE_IRQ,
}
};
static struct resource s3c64xx_uart1_resource[] = {
......@@ -61,19 +50,8 @@ static struct resource s3c64xx_uart1_resource[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_S3CUART_RX1,
.end = IRQ_S3CUART_RX1,
.flags = IORESOURCE_IRQ,
},
[2] = {
.start = IRQ_S3CUART_TX1,
.end = IRQ_S3CUART_TX1,
.flags = IORESOURCE_IRQ,
},
[3] = {
.start = IRQ_S3CUART_ERR1,
.end = IRQ_S3CUART_ERR1,
.start = IRQ_UART1,
.end = IRQ_UART1,
.flags = IORESOURCE_IRQ,
},
};
......@@ -85,19 +63,8 @@ static struct resource s3c6xx_uart2_resource[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_S3CUART_RX2,
.end = IRQ_S3CUART_RX2,
.flags = IORESOURCE_IRQ,
},
[2] = {
.start = IRQ_S3CUART_TX2,
.end = IRQ_S3CUART_TX2,
.flags = IORESOURCE_IRQ,
},
[3] = {
.start = IRQ_S3CUART_ERR2,
.end = IRQ_S3CUART_ERR2,
.start = IRQ_UART2,
.end = IRQ_UART2,
.flags = IORESOURCE_IRQ,
},
};
......@@ -109,19 +76,8 @@ static struct resource s3c64xx_uart3_resource[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_S3CUART_RX3,
.end = IRQ_S3CUART_RX3,
.flags = IORESOURCE_IRQ,
},
[2] = {
.start = IRQ_S3CUART_TX3,
.end = IRQ_S3CUART_TX3,
.flags = IORESOURCE_IRQ,
},
[3] = {
.start = IRQ_S3CUART_ERR3,
.end = IRQ_S3CUART_ERR3,
.start = IRQ_UART3,
.end = IRQ_UART3,
.flags = IORESOURCE_IRQ,
},
};
......
arch/arm/mach-s3c64xx/include/mach/irqs.h
浏览文件 @ 2a8d7bdd
......@@ -27,36 +27,6 @@
#define IRQ_VIC0_BASE S3C_IRQ(0)
#define IRQ_VIC1_BASE S3C_IRQ(32)
/* UART interrupts, each UART has 4 intterupts per channel so
* use the space between the ISA and S3C main interrupts. Note, these
* are not in the same order as the S3C24XX series! */
#define IRQ_S3CUART_BASE0 (16)
#define IRQ_S3CUART_BASE1 (20)
#define IRQ_S3CUART_BASE2 (24)
#define IRQ_S3CUART_BASE3 (28)
#define UART_IRQ_RXD (0)
#define UART_IRQ_ERR (1)
#define UART_IRQ_TXD (2)
#define UART_IRQ_MODEM (3)
#define IRQ_S3CUART_RX0 (IRQ_S3CUART_BASE0 + UART_IRQ_RXD)
#define IRQ_S3CUART_TX0 (IRQ_S3CUART_BASE0 + UART_IRQ_TXD)
#define IRQ_S3CUART_ERR0 (IRQ_S3CUART_BASE0 + UART_IRQ_ERR)
#define IRQ_S3CUART_RX1 (IRQ_S3CUART_BASE1 + UART_IRQ_RXD)
#define IRQ_S3CUART_TX1 (IRQ_S3CUART_BASE1 + UART_IRQ_TXD)
#define IRQ_S3CUART_ERR1 (IRQ_S3CUART_BASE1 + UART_IRQ_ERR)
#define IRQ_S3CUART_RX2 (IRQ_S3CUART_BASE2 + UART_IRQ_RXD)
#define IRQ_S3CUART_TX2 (IRQ_S3CUART_BASE2 + UART_IRQ_TXD)
#define IRQ_S3CUART_ERR2 (IRQ_S3CUART_BASE2 + UART_IRQ_ERR)
#define IRQ_S3CUART_RX3 (IRQ_S3CUART_BASE3 + UART_IRQ_RXD)
#define IRQ_S3CUART_TX3 (IRQ_S3CUART_BASE3 + UART_IRQ_TXD)
#define IRQ_S3CUART_ERR3 (IRQ_S3CUART_BASE3 + UART_IRQ_ERR)
/* VIC based IRQs */
#define S3C64XX_IRQ_VIC0(x) (IRQ_VIC0_BASE + (x))
......
arch/arm/mach-s3c64xx/irq.c
浏览文件 @ 2a8d7bdd
......@@ -25,29 +25,6 @@
#include <plat/irq-uart.h>
#include <plat/cpu.h>
static struct s3c_uart_irq uart_irqs[] = {
[0] = {
.regs = S3C_VA_UART0,
.base_irq = IRQ_S3CUART_BASE0,
.parent_irq = IRQ_UART0,
},
[1] = {
.regs = S3C_VA_UART1,
.base_irq = IRQ_S3CUART_BASE1,
.parent_irq = IRQ_UART1,
},
[2] = {
.regs = S3C_VA_UART2,
.base_irq = IRQ_S3CUART_BASE2,
.parent_irq = IRQ_UART2,
},
[3] = {
.regs = S3C_VA_UART3,
.base_irq = IRQ_S3CUART_BASE3,
.parent_irq = IRQ_UART3,
},
};
/* setup the sources the vic should advertise resume for, even though it
* is not doing the wake (set_irq_wake needs to be valid) */
#define IRQ_VIC0_RESUME (1 << (IRQ_RTC_TIC - IRQ_VIC0_BASE))
......@@ -67,6 +44,4 @@ void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid)
/* add the timer sub-irqs */
s3c_init_vic_timer_irq(5, IRQ_TIMER0);
s3c_init_uart_irqs(uart_irqs, ARRAY_SIZE(uart_irqs));
}
arch/arm/plat-s5p/Kconfig
浏览文件 @ 2a8d7bdd
......@@ -22,7 +22,6 @@ config PLAT_S5P
select PLAT_SAMSUNG
select SAMSUNG_CLKSRC
select SAMSUNG_IRQ_VIC_TIMER
select SAMSUNG_IRQ_UART
help
Base platform code for Samsung's S5P series SoC.
......
arch/arm/plat-s5p/dev-uart.c
浏览文件 @ 2a8d7bdd
......@@ -32,20 +32,10 @@ static struct resource s5p_uart0_resource[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_S5P_UART_RX0,
.end = IRQ_S5P_UART_RX0,
.start = IRQ_UART0,
.end = IRQ_UART0,
.flags = IORESOURCE_IRQ,
},
[2] = {
.start = IRQ_S5P_UART_TX0,
.end = IRQ_S5P_UART_TX0,
.flags = IORESOURCE_IRQ,
},
[3] = {
.start = IRQ_S5P_UART_ERR0,
.end = IRQ_S5P_UART_ERR0,
.flags = IORESOURCE_IRQ,
}
};
static struct resource s5p_uart1_resource[] = {
......@@ -55,18 +45,8 @@ static struct resource s5p_uart1_resource[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_S5P_UART_RX1,
.end = IRQ_S5P_UART_RX1,
.flags = IORESOURCE_IRQ,
},
[2] = {
.start = IRQ_S5P_UART_TX1,
.end = IRQ_S5P_UART_TX1,
.flags = IORESOURCE_IRQ,
},
[3] = {
.start = IRQ_S5P_UART_ERR1,
.end = IRQ_S5P_UART_ERR1,
.start = IRQ_UART1,
.end = IRQ_UART1,
.flags = IORESOURCE_IRQ,
},
};
......@@ -78,18 +58,8 @@ static struct resource s5p_uart2_resource[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_S5P_UART_RX2,
.end = IRQ_S5P_UART_RX2,
.flags = IORESOURCE_IRQ,
},
[2] = {
.start = IRQ_S5P_UART_TX2,
.end = IRQ_S5P_UART_TX2,
.flags = IORESOURCE_IRQ,
},
[3] = {
.start = IRQ_S5P_UART_ERR2,
.end = IRQ_S5P_UART_ERR2,
.start = IRQ_UART2,
.end = IRQ_UART2,
.flags = IORESOURCE_IRQ,
},
};
......@@ -102,18 +72,8 @@ static struct resource s5p_uart3_resource[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_S5P_UART_RX3,
.end = IRQ_S5P_UART_RX3,
.flags = IORESOURCE_IRQ,
},
[2] = {
.start = IRQ_S5P_UART_TX3,
.end = IRQ_S5P_UART_TX3,
.flags = IORESOURCE_IRQ,
},
[3] = {
.start = IRQ_S5P_UART_ERR3,
.end = IRQ_S5P_UART_ERR3,
.start = IRQ_UART3,
.end = IRQ_UART3,
.flags = IORESOURCE_IRQ,
},
#endif
......@@ -127,18 +87,8 @@ static struct resource s5p_uart4_resource[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_S5P_UART_RX4,
.end = IRQ_S5P_UART_RX4,
.flags = IORESOURCE_IRQ,
},
[2] = {
.start = IRQ_S5P_UART_TX4,
.end = IRQ_S5P_UART_TX4,
.flags = IORESOURCE_IRQ,
},
[3] = {
.start = IRQ_S5P_UART_ERR4,
.end = IRQ_S5P_UART_ERR4,
.start = IRQ_UART4,
.end = IRQ_UART4,
.flags = IORESOURCE_IRQ,
},
#endif
......@@ -152,18 +102,8 @@ static struct resource s5p_uart5_resource[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_S5P_UART_RX5,
.end = IRQ_S5P_UART_RX5,
.flags = IORESOURCE_IRQ,
},
[2] = {
.start = IRQ_S5P_UART_TX5,
.end = IRQ_S5P_UART_TX5,
.flags = IORESOURCE_IRQ,
},
[3] = {
.start = IRQ_S5P_UART_ERR5,
.end = IRQ_S5P_UART_ERR5,
.start = IRQ_UART5,
.end = IRQ_UART5,
.flags = IORESOURCE_IRQ,
},
#endif
......
arch/arm/plat-s5p/include/plat/irqs.h
浏览文件 @ 2a8d7bdd
......@@ -37,41 +37,6 @@
#define IRQ_VIC1_BASE S5P_VIC1_BASE
#define IRQ_VIC2_BASE S5P_VIC2_BASE
/* UART interrupts, each UART has 4 intterupts per channel so
* use the space between the ISA and S3C main interrupts. Note, these
* are not in the same order as the S3C24XX series! */
#define IRQ_S5P_UART_BASE0 (16)
#define IRQ_S5P_UART_BASE1 (20)
#define IRQ_S5P_UART_BASE2 (24)
#define IRQ_S5P_UART_BASE3 (28)
#define UART_IRQ_RXD (0)
#define UART_IRQ_ERR (1)
#define UART_IRQ_TXD (2)
#define IRQ_S5P_UART_RX0 (IRQ_S5P_UART_BASE0 + UART_IRQ_RXD)
#define IRQ_S5P_UART_TX0 (IRQ_S5P_UART_BASE0 + UART_IRQ_TXD)
#define IRQ_S5P_UART_ERR0 (IRQ_S5P_UART_BASE0 + UART_IRQ_ERR)
#define IRQ_S5P_UART_RX1 (IRQ_S5P_UART_BASE1 + UART_IRQ_RXD)
#define IRQ_S5P_UART_TX1 (IRQ_S5P_UART_BASE1 + UART_IRQ_TXD)
#define IRQ_S5P_UART_ERR1 (IRQ_S5P_UART_BASE1 + UART_IRQ_ERR)
#define IRQ_S5P_UART_RX2 (IRQ_S5P_UART_BASE2 + UART_IRQ_RXD)
#define IRQ_S5P_UART_TX2 (IRQ_S5P_UART_BASE2 + UART_IRQ_TXD)
#define IRQ_S5P_UART_ERR2 (IRQ_S5P_UART_BASE2 + UART_IRQ_ERR)
#define IRQ_S5P_UART_RX3 (IRQ_S5P_UART_BASE3 + UART_IRQ_RXD)
#define IRQ_S5P_UART_TX3 (IRQ_S5P_UART_BASE3 + UART_IRQ_TXD)
#define IRQ_S5P_UART_ERR3 (IRQ_S5P_UART_BASE3 + UART_IRQ_ERR)
/* S3C compatibilty defines */
#define IRQ_S3CUART_RX0 IRQ_S5P_UART_RX0
#define IRQ_S3CUART_RX1 IRQ_S5P_UART_RX1
#define IRQ_S3CUART_RX2 IRQ_S5P_UART_RX2
#define IRQ_S3CUART_RX3 IRQ_S5P_UART_RX3
/* VIC based IRQs */
#define S5P_IRQ_VIC0(x) (S5P_VIC0_BASE + (x))
......
arch/arm/plat-s5p/irq.c
浏览文件 @ 2a8d7bdd
......@@ -17,42 +17,10 @@
#include <asm/hardware/vic.h>
#include <linux/serial_core.h>
#include <mach/map.h>
#include <plat/regs-timer.h>
#include <plat/regs-serial.h>
#include <plat/cpu.h>
#include <plat/irq-vic-timer.h>
#include <plat/irq-uart.h>
/*
* Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3]
* are consecutive when looking up the interrupt in the demux routines.
*/
static struct s3c_uart_irq uart_irqs[] = {
[0] = {
.regs = S5P_VA_UART0,
.base_irq = IRQ_S5P_UART_BASE0,
.parent_irq = IRQ_UART0,
},
[1] = {
.regs = S5P_VA_UART1,
.base_irq = IRQ_S5P_UART_BASE1,
.parent_irq = IRQ_UART1,
},
[2] = {
.regs = S5P_VA_UART2,
.base_irq = IRQ_S5P_UART_BASE2,
.parent_irq = IRQ_UART2,
},
#if CONFIG_SERIAL_SAMSUNG_UARTS > 3
[3] = {
.regs = S5P_VA_UART3,
.base_irq = IRQ_S5P_UART_BASE3,
.parent_irq = IRQ_UART3,
},
#endif
};
void __init s5p_init_irq(u32 *vic, u32 num_vic)
{
......@@ -65,6 +33,4 @@ void __init s5p_init_irq(u32 *vic, u32 num_vic)
#endif
s3c_init_vic_timer_irq(5, IRQ_TIMER0);
s3c_init_uart_irqs(uart_irqs, ARRAY_SIZE(uart_irqs));
}
arch/arm/plat-samsung/Kconfig
浏览文件 @ 2a8d7bdd
......@@ -65,11 +65,6 @@ config SAMSUNG_IRQ_VIC_TIMER
help
Internal configuration to build the VIC timer interrupt code.
config SAMSUNG_IRQ_UART
bool
help
Internal configuration to build the IRQ UART demux code.
# options for gpio configuration support
config SAMSUNG_GPIOLIB_4BIT
......
arch/arm/plat-samsung/Makefile
浏览文件 @ 2a8d7bdd
......@@ -21,7 +21,6 @@ obj-y += dev-asocdma.o
obj-$(CONFIG_SAMSUNG_CLKSRC) += clock-clksrc.o
obj-$(CONFIG_SAMSUNG_IRQ_UART) += irq-uart.o
obj-$(CONFIG_SAMSUNG_IRQ_VIC_TIMER) += irq-vic-timer.o
# ADC
......
arch/arm/plat-samsung/include/plat/regs-serial.h
浏览文件 @ 2a8d7bdd
......@@ -186,6 +186,11 @@
#define S3C64XX_UINTSP 0x34
#define S3C64XX_UINTM 0x38
#define S3C64XX_UINTM_RXD (0)
#define S3C64XX_UINTM_TXD (2)
#define S3C64XX_UINTM_RXD_MSK (1 << S3C64XX_UINTM_RXD)
#define S3C64XX_UINTM_TXD_MSK (1 << S3C64XX_UINTM_TXD)
/* Following are specific to S5PV210 */
#define S5PV210_UCON_CLKMASK (1<<10)
#define S5PV210_UCON_PCLK (0<<10)
......
arch/arm/plat-samsung/irq-uart.c 已删除 100644 → 0
浏览文件 @ 88bb4ea1
/* arch/arm/plat-samsung/irq-uart.c
* originally part of arch/arm/plat-s3c64xx/irq.c
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
* Samsung- UART Interrupt handling
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/serial_core.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <asm/mach/irq.h>
#include <mach/map.h>
#include <plat/irq-uart.h>
#include <plat/regs-serial.h>
#include <plat/cpu.h>
/* Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3]
* are consecutive when looking up the interrupt in the demux routines.
*/
static void s3c_irq_demux_uart(unsigned int irq, struct irq_desc *desc)
{
struct s3c_uart_irq *uirq = desc->irq_data.handler_data;
struct irq_chip *chip = irq_get_chip(irq);
u32 pend = __raw_readl(uirq->regs + S3C64XX_UINTP);
int base = uirq->base_irq;
chained_irq_enter(chip, desc);
if (pend & (1 << 0))
generic_handle_irq(base);
if (pend & (1 << 1))
generic_handle_irq(base + 1);
if (pend & (1 << 2))
generic_handle_irq(base + 2);
if (pend & (1 << 3))
generic_handle_irq(base + 3);
chained_irq_exit(chip, desc);
}
static void __init s3c_init_uart_irq(struct s3c_uart_irq *uirq)
{
void __iomem *reg_base = uirq->regs;
struct irq_chip_generic *gc;
struct irq_chip_type *ct;
/* mask all interrupts at the start. */
__raw_writel(0xf, reg_base + S3C64XX_UINTM);
gc = irq_alloc_generic_chip("s3c-uart", 1, uirq->base_irq, reg_base,
handle_level_irq);
if (!gc) {
pr_err("%s: irq_alloc_generic_chip for IRQ %u failed\n",
__func__, uirq->base_irq);
return;
}
ct = gc->chip_types;
ct->chip.irq_ack = irq_gc_ack_set_bit;
ct->chip.irq_mask = irq_gc_mask_set_bit;
ct->chip.irq_unmask = irq_gc_mask_clr_bit;
ct->regs.ack = S3C64XX_UINTP;
ct->regs.mask = S3C64XX_UINTM;
irq_setup_generic_chip(gc, IRQ_MSK(4), IRQ_GC_INIT_MASK_CACHE,
IRQ_NOREQUEST | IRQ_NOPROBE, 0);
irq_set_handler_data(uirq->parent_irq, uirq);
irq_set_chained_handler(uirq->parent_irq, s3c_irq_demux_uart);
}
/**
* s3c_init_uart_irqs() - initialise UART IRQs and the necessary demuxing
* @irq: The interrupt data for registering
* @nr_irqs: The number of interrupt descriptions in @irq.
*
* Register the UART interrupts specified by @irq including the demuxing
* routines. This supports the S3C6400 and newer style of devices.
*/
void __init s3c_init_uart_irqs(struct s3c_uart_irq *irq, unsigned int nr_irqs)
{
for (; nr_irqs > 0; nr_irqs--, irq++)
s3c_init_uart_irq(irq);
}
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或