The alloc kthread should've been using try_to_freeze() - and also there
was the potential for the alloc kthread to get woken up after it had
shut down, which would have been bad.
Signed-off-by: NKent Overstreet <kmo@daterainc.com>

Part of the job of garbage collection is to add up however many sectors
of live data it finds in each bucket, but that doesn't work very well if
it doesn't reset GC_SECTORS_USED() when it starts. Whoops.

This wouldn't have broken anything horribly, but allocation tries to
preferentially reclaim buckets that are mostly empty and that's not
gonna work with an incorrect GC_SECTORS_USED() value.
Signed-off-by: NKent Overstreet <kmo@daterainc.com>
Cc: linux-stable <stable@vger.kernel.org> # >= v3.10

The journal replay code starts by finding something that looks like a
valid journal entry, then it does a binary search over the unchecked
region of the journal for the journal entries with the highest sequence
numbers.

Trouble is, the logic was wrong - journal_read_bucket() returns true if
it found journal entries we need, but if the range of journal entries
we're looking for loops around the end of the journal - in that case
journal_read_bucket() could return true when it hadn't found the highest
sequence number we'd seen yet, and in that case the binary search did
the wrong thing. Whoops.
Signed-off-by: NKent Overstreet <kmo@daterainc.com>
Cc: linux-stable <stable@vger.kernel.org> # >= v3.10

Stopping a cache set is supposed to make it stop attached backing
devices, but somewhere along the way that code got lost. Fixing this
mainly has the effect of fixing our reboot notifier.
Signed-off-by: NKent Overstreet <kmo@daterainc.com>
Cc: linux-stable <stable@vger.kernel.org> # >= v3.10

If we stopped a bcache device when we were already detaching (or
something like that), bcache_device_unlink() would try to remove a
symlink from sysfs that was already gone because the bcache dev kobject
had already been removed from sysfs.

So keep track of whether we've removed stuff from sysfs.
Signed-off-by: NKent Overstreet <kmo@daterainc.com>
Cc: linux-stable <stable@vger.kernel.org> # >= v3.10

Whoops - bcache's flush/FUA was mostly correct, but flushes get filtered
out unless we say we support them...
Signed-off-by: NKent Overstreet <kmo@daterainc.com>
Cc: linux-stable <stable@vger.kernel.org> # >= v3.10

There is a missing NULL check after the kzalloc().
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>

In the far-too-complicated closure code - closures can have destructors,
for probably dubious reasons; they get run after the closure is no
longer waiting on anything but before dropping the parent ref, intended
just for freeing whatever memory the closure is embedded in.

Trouble is, when remaining goes to 0 and we've got nothing more to run -
we also have to unlock the closure, setting remaining to -1. If there's
a destructor, that unlock isn't doing anything - nobody could be trying
to lock it if we're about to free it - but if the unlock _is needed...
that check for a destructor was racy. Argh.
Signed-off-by: NKent Overstreet <kmo@daterainc.com>
Cc: linux-stable <stable@vger.kernel.org> # >= v3.10

Some of bcache's utility code has made it into the rest of the kernel,
so drop the bcache versions.

Bcache used to have a workaround for allocating from a bio set under
generic_make_request() (if you allocated more than once, the bios you
already allocated would get stuck on current->bio_list when you
submitted, and you'd risk deadlock) - bcache would mask out __GFP_WAIT
when allocating bios under generic_make_request() so that allocation
could fail and it could retry from workqueue. But bio_alloc_bioset() has
a workaround now, so we can drop this hack and the associated error
handling.
Signed-off-by: NKent Overstreet <koverstreet@google.com>

This code has rotted and it hasn't been used in ages anyways.
Signed-off-by: NKent Overstreet <kmo@daterainc.com>

Signed-off-by: NKent Overstreet <kmo@daterainc.com>

Journal writes need to be marked FUA, not just REQ_FLUSH. And btree node
writes have... weird ordering requirements.
Signed-off-by: NKent Overstreet <koverstreet@google.com>

Signed-off-by: NGabriel de Perthuis <g2p.code@gmail.com>
Signed-off-by: NKent Overstreet <koverstreet@google.com>

Signed-off-by: NGabriel de Perthuis <g2p.code@gmail.com>

Now that we're tracking dirty data per stripe, we can add two
optimizations for raid5/6:

 * If a stripe is already dirty, force writes to that stripe to
   writeback mode - to help build up full stripes of dirty data

 * When flushing dirty data, preferentially write out full stripes first
   if there are any.
Signed-off-by: NKent Overstreet <koverstreet@google.com>

To make background writeback aware of raid5/6 stripes, we first need to
track the amount of dirty data within each stripe - we do this by
breaking up the existing sectors_dirty into per stripe atomic_ts
Signed-off-by: NKent Overstreet <koverstreet@google.com>

Previously, dirty_data wouldn't get initialized until the first garbage
collection... which was a bit of a problem for background writeback (as
the PD controller keys off of it) and also confusing for users.

This is also prep work for making background writeback aware of raid5/6
stripes.
Signed-off-by: NKent Overstreet <koverstreet@google.com>

The old lazy sorting code was kind of hacky - rewrite in a way that
mathematically makes more sense; the idea is that the size of the sets
of keys in a btree node should increase by a more or less fixed ratio
from smallest to biggest.
Signed-off-by: NKent Overstreet <koverstreet@google.com>

Old gcc doesnt like the struct hack, and it is kind of ugly. So finish
off the work to convert pr_debug() statements to tracepoints, and delete
pkey()/pbtree().
Signed-off-by: NKent Overstreet <koverstreet@google.com>

The tracepoints were reworked to be more sensible, and fixed a null
pointer deref in one of the tracepoints.

Converted some of the pr_debug()s to tracepoints - this is partly a
performance optimization; it used to be that with DEBUG or
CONFIG_DYNAMIC_DEBUG pr_debug() was an empty macro; but at some point it
was changed to an empty inline function.

Some of the pr_debug() statements had rather expensive function calls as
part of the arguments, so this code was getting run unnecessarily even
on non debug kernels - in some fast paths, too.
Signed-off-by: NKent Overstreet <koverstreet@google.com>

The most significant change is that btree reads are now done
synchronously, instead of asynchronously and doing the post read stuff
from a workqueue.

This was originally done because we can't block on IO under
generic_make_request(). But - we already have a mechanism to punt cache
lookups to workqueue if needed, so if we just use that we don't have to
deal with the complexity of doing things asynchronously.

The main benefit is this makes the locking situation saner; we can hold
our write lock on the btree node until we're finished reading it, and we
don't need that btree_node_read_done() flag anymore.

Also, for writes, btree_write() was broken out into btree_node_write()
and btree_leaf_dirty() - the old code with the boolean argument was dumb
and confusing.

The prio_blocked mechanism was improved a bit too, now the only counter
is in struct btree_write, we don't mess with transfering a count from
struct btree anymore.

This required changing garbage collection to block prios at the start
and unblock when it finishes, which is cleaner than what it was doing
anyways (the old code had mostly the same effect, but was doing it in a
convoluted way)

And the btree iter btree_node_read_done() uses was converted to a real
mempool.
Signed-off-by: NKent Overstreet <koverstreet@google.com>

Using a workqueue when we just want a single thread is a bit silly.
Signed-off-by: NKent Overstreet <koverstreet@google.com>

Signed-off-by: NGabriel de Perthuis <g2p.code+bcache@gmail.com>
Signed-off-by: NKent Overstreet <koverstreet@google.com>

An old version of gcc was complaining about using a const int as the
size of a stack allocated array. Which should be fine - but using
ARRAY_SIZE() is better, anyways.

Also, refactor the code to use scnprintf().
Signed-off-by: NKent Overstreet <koverstreet@google.com>

bio_alloc_bioset returns NULL on failure. This fix adds a missing check
for potential NULL pointer dereferencing.
Signed-off-by: NKumar Amit Mehta <gmate.amit@gmail.com>
Signed-off-by: NKent Overstreet <koverstreet@google.com>

Reported-by: NAndy Grover <agrover@redhat.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Writing 0 when iser was not previously enabled, so succeed but do
nothing so that user-space code doesn't need a try: catch block
when ib_isert logic is not available.

Also, return actual error from add_network_portal using PTR_ERR
during op=enable failure.
Signed-off-by: NAndy Grover <agrover@redhat.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

There might be issue with lockup detection when scheduling on an
empty ring that have been sitting idle for a while. Thus update
the lockup tracking data when scheduling new work in an empty ring.
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Tested-by: NAndy Lutomirski <luto@amacapital.net>
Cc: stable@vger.kernel.org
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

There are a large number of reports that the media build is
not compiling when some drivers are compiled as builtin, while
the needed frontends are compiled as module.

On the last one of such reports:
	From: kbuild test robot <fengguang.wu@intel.com>
	Subject: saa7134-dvb.c:undefined reference to `zl10039_attach'

The .config file has:

	CONFIG_VIDEO_SAA7134=y
	CONFIG_VIDEO_SAA7134_DVB=y
	# CONFIG_MEDIA_ATTACH is not set
	CONFIG_DVB_ZL10039=m

And it produces all those errors:

   drivers/built-in.o: In function `set_type':
   tuner-core.c:(.text+0x2f263e): undefined reference to `tea5767_attach'
   tuner-core.c:(.text+0x2f273e): undefined reference to `tda9887_attach'
   drivers/built-in.o: In function `tuner_probe':
   tuner-core.c:(.text+0x2f2d20): undefined reference to `tea5767_autodetection'
   drivers/built-in.o: In function `av7110_attach':
   av7110.c:(.text+0x330bda): undefined reference to `ves1x93_attach'
   av7110.c:(.text+0x330bf7): undefined reference to `stv0299_attach'
   av7110.c:(.text+0x330c63): undefined reference to `tda8083_attach'
   av7110.c:(.text+0x330d09): undefined reference to `ves1x93_attach'
   av7110.c:(.text+0x330d33): undefined reference to `tda8083_attach'
   av7110.c:(.text+0x330d5d): undefined reference to `stv0297_attach'
   av7110.c:(.text+0x330dbe): undefined reference to `stv0299_attach'
   drivers/built-in.o: In function `tuner_attach_dtt7520x':
   ngene-cards.c:(.text+0x3381cb): undefined reference to `dvb_pll_attach'
   drivers/built-in.o: In function `demod_attach_lg330x':
   ngene-cards.c:(.text+0x33828a): undefined reference to `lgdt330x_attach'
   drivers/built-in.o: In function `demod_attach_stv0900':
   ngene-cards.c:(.text+0x3383d5): undefined reference to `stv090x_attach'
   drivers/built-in.o: In function `cineS2_probe':
   ngene-cards.c:(.text+0x338b7f): undefined reference to `drxk_attach'
   drivers/built-in.o: In function `configure_tda827x_fe':
   saa7134-dvb.c:(.text+0x346ae7): undefined reference to `tda10046_attach'
   drivers/built-in.o: In function `dvb_init':
   saa7134-dvb.c:(.text+0x347283): undefined reference to `mt352_attach'
   saa7134-dvb.c:(.text+0x3472cd): undefined reference to `mt352_attach'
   saa7134-dvb.c:(.text+0x34731c): undefined reference to `tda10046_attach'
   saa7134-dvb.c:(.text+0x34733c): undefined reference to `tda10046_attach'
   saa7134-dvb.c:(.text+0x34735c): undefined reference to `tda10046_attach'
   saa7134-dvb.c:(.text+0x347378): undefined reference to `tda10046_attach'
   saa7134-dvb.c:(.text+0x3473db): undefined reference to `tda10046_attach'
   drivers/built-in.o:saa7134-dvb.c:(.text+0x347502): more undefined references to `tda10046_attach' follow
   drivers/built-in.o: In function `dvb_init':
   saa7134-dvb.c:(.text+0x347812): undefined reference to `mt352_attach'
   saa7134-dvb.c:(.text+0x347951): undefined reference to `mt312_attach'
   saa7134-dvb.c:(.text+0x3479a9): undefined reference to `mt312_attach'
>> saa7134-dvb.c:(.text+0x3479c1): undefined reference to `zl10039_attach'

This is happening because a builtin module can't use directly a symbol
found on a module. By enabling CONFIG_MEDIA_ATTACH, the configuration
becomes valid, as dvb_attach() macro loads the module if needed, making
the symbol available to the builtin module.

While this bug started to appear after the patches that use IS_DEFINED
macro (like changeset 7b34be71), this
bug is a way ancient than that.

The thing is that, before the IS_DEFINED() patches, the logic used to be:

       && defined(MODULE))
struct dvb_frontend *zl10039_attach(struct dvb_frontend *fe,
					u8 i2c_addr,
					struct i2c_adapter *i2c);
static inline struct dvb_frontend *zl10039_attach(struct dvb_frontend *fe,
					u8 i2c_addr,
					struct i2c_adapter *i2c)
{
	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
	return NULL;
}

The above code, with the .config file used, was evoluting to FALSE
(instead of TRUE as it should be, as CONFIG_DVB_ZL10039 is 'm'),
and were adding the static inline code at saa7134-dvb, instead
of the external call. So, while it weren't producing any compilation
error, the code weren't working either.

So, as the overhead for using CONFIG_MEDIA_ATTACH is minimal, just
enable it, if MODULES is defined.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Commit c0114709 (irqchip: gic: Perform the gic_secondary_init() call via
CPU notifier) moves gic_secondary_init() that used to be called in
.smp_secondary_init hook into a notifier call.  But it changes the
system behavior a little bit.  Before the commit, gic_cpu_init()
is called not only when kernel brings up the secondary cores but also
when system resuming procedure hot-plugs the cores back to kernel.
While after the commit, the function will not be called in the latter
case, where the 'action' will not be CPU_STARTING but
CPU_STARTING_FROZEN.  This behavior difference at least causes the
following suspend/resume regression on imx6q.

$ echo mem > /sys/power/state
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
mmc1: card e624 removed
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
PM: Entering mem sleep
PM: suspend of devices complete after 5.930 msecs
PM: suspend devices took 0.010 seconds
PM: late suspend of devices complete after 0.343 msecs
PM: noirq suspend of devices complete after 0.828 msecs
Disabling non-boot CPUs ...
CPU1: shutdown
CPU2: shutdown
CPU3: shutdown
Enabling non-boot CPUs ...
CPU1: Booted secondary processor
INFO: rcu_sched detected stalls on CPUs/tasks: { 1 2 3} (detected by 0, t=2102 jiffies, g=4294967169, c=4294967168, q=17)
Task dump for CPU 1:
swapper/1       R running      0     0      1 0x00000000
Backtrace:
[<bf895ff4>] (0xbf895ff4) from [<00000000>] (  (null))
Backtrace aborted due to bad frame pointer <8007ccdc>
Task dump for CPU 2:
swapper/2       R running      0     0      1 0x00000000
Backtrace:
[<8075dbdc>] (0x8075dbdc) from [<00000000>] (  (null))
Backtrace aborted due to bad frame pointer <00000002>
Task dump for CPU 3:
swapper/3       R running      0     0      1 0x00000000
Backtrace:
[<8075dbdc>] (0x8075dbdc) from [<00000000>] (  (null))

Fix the regression by checking 'action' being CPU_STARTING_FROZEN to
have gic_cpu_init() called for secondary cores when system resumes.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Tested-by: NJoseph Lo <josephl@nvidia.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

The $obj-m/$obj-y vars should be adding new modules to build, not
overriding it. So, it should never use
	$obj-y := foo.o
instead, it should use:
	$obj-y += foo.o

Failing to do that is very bad, as it will suppress needed modules.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add product id for Abbott strip port cable for Precision meter which
uses the TI 3410 chip.
Signed-off-by: NAnders Hammarquist <iko@iko.pp.se>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Commit 7cd8407d (ACPI / PM: Do not execute _PS0 for devices without
_PSC during initialization) introduced a regression on some systems
with Intel Lynxpoint Low-Power Subsystem (LPSS) where some devices
need to be powered up during initialization, but their device objects
in the ACPI namespace have _PS0 and _PS3 only (without _PSC or power
resources).

To work around this problem, make the ACPI LPSS driver power up
devices it knows about by using a new helper function
acpi_device_fix_up_power() that does all of the necessary
sanity checks and calls acpi_dev_pm_explicit_set() to put the
device into D0.
Reported-and-tested-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Commit 781d737c (ACPI: Drop power resources driver) introduced a
bug in the power resources initialization error code path causing
a NULL pointer to be referenced in acpi_release_power_resource()
if there's an error triggering a jump to the 'err' label in
acpi_add_power_resource().  This happens because the list_node
field of struct acpi_power_resource has not been initialized yet
at this point and doing a list_del() on it is a bad idea.

To prevent this problem from occuring, initialize the list_node
field of struct acpi_power_resource upfront.
Reported-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: NLan Tianyu <tianyu.lan@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: 3.9+ <stable@vger.kernel.org>
Acked-by: NYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Reviewed-by: NMika Westerberg <mika.westerberg@linux.intel.com>

Since commit 3757b948 (ACPI / hotplug: Fix concurrency issues and
memory leaks) acpi_bus_scan() and acpi_bus_trim() must always be
called under acpi_scan_lock, but currently the following scenario
violating that requirement is possible:

 write_undock()
  handle_eject_request()
   hotplug_dock_devices()
    dock_remove_acpi_device()
     acpi_bus_trim()

Fix that by making write_undock() acquire acpi_scan_lock before
calling handle_eject_request() as appropriate (begin_undock() is
under the lock too in analogy with acpi_dock_deferred_cb()).
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: 3.9+ <stable@vger.kernel.org>
Acked-by: NToshi Kani <toshi.kani@hp.com>

acpi_get_override_irq() was added because there was a problem with
buggy BIOSes passing wrong IRQ() resource for the RTC IRQ.  The
commit that added the workaround was 61fd47e0 (ACPI: fix two
IRQ8 issues in IOAPIC mode).

With ACPI 5 enumerated devices there are typically one or more
extended IRQ resources per device (and these IRQs can be shared).
However, the acpi_get_override_irq() workaround forces all IRQs in
range 0 - 15 (the legacy ISA IRQs) to be edge triggered, active high
as can be seen from the dmesg below:

	ACPI: IRQ 6 override to edge, high
	ACPI: IRQ 7 override to edge, high
	ACPI: IRQ 7 override to edge, high
	ACPI: IRQ 13 override to edge, high

Also /proc/interrupts for the I2C controllers (INT33C2 and INT33C3) shows
the same thing:

	7:          4          0          0          0   IO-APIC-edge INT33C2:00, INT33C3:00

The _CSR method for INT33C2 (and INT33C3) device returns following
resource:

	Interrupt (ResourceConsumer, Level, ActiveLow, Shared,,, )
	{
		0x00000007,
	}

which states that this is supposed to be level triggered, active low,
shared IRQ instead.

Fix this by making sure that acpi_get_override_irq() gets only called
when we are dealing with legacy IRQ() or IRQNoFlags() descriptors.

While we are there, correct pr_warning() to print the right triggering
value.

This change turns out to be necessary to make DMA work correctly on
systems based on the Intel Lynxpoint PCH (Platform Controller Hub).

[rjw: Changelog]
Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Cc: 3.9+ <stable@vger.kernel.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

The ISP clock register content is not preserved over the ISP power domain
off/on cycle. Instead of setting the clock frequencies once at probe time
the clock rates set up is moved to the runtime_resume handler, which is
invoked after the related power domain is already enabled, ensuring the
clocks are properly configured when the device is actively used.
This fixes the FIMC-IS malfunctions and STREAM ON timeout errors accuring
on some boards:
[ 59.860000] fimc_is_general_irq_handler:583 ISR_NDONE: 5: 0x800003e8, IS_ERROR_UNKNOWN
[ 59.860000] fimc_is_general_irq_handler:586 IS_ERROR_TIME_OUT
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The DRM PRIME API passes file flags to the driver for the exported
buffer. Honor them instead of hardcoding 0600.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: stable@vger.kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

The C8000 workstation (64 bit kernel only) has a somewhat different
serial port configuration than other models.
Thomas Bogendoerfer sent a patch to fix this in September 2010, which
was now minimally modified by me.
Signed-off-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: NHelge Deller <deller@gmx.de>

fw_priv->buf is accessed in both request_firmware_load() and
writing to sysfs file of 'loading' context, but not protected
by 'fw_lock' entirely. The patch makes sure that access on
'fw_priv->buf' is protected by the lock.

So fixes the double abort problem reported by nirinA raseliarison:

	http://lkml.org/lkml/2013/6/14/188Reported-and-tested-by: NnirinA raseliarison <nirina.raseliarison@gmail.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable <stable@vger.kernel.org> # 3.9
Signed-off-by: NMing Lei <ming.lei@canonical.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>