Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 26 2月, 2014 1 次提交
  3. 12 2月, 2014 1 次提交
  5. 29 5月, 2013 1 次提交
    • T
      ALSA: PCI: Remove superfluous pci_set_drvdata(pci, NULL) at remove · 20a24225
      由 Takashi Iwai 提交于 
      As drvdata is cleared to NULL at probe failure or at removal by the
driver core, we don't have to call pci_set_drvdata(pci, NULL) any
longer in each driver.

The only remaining pci_set_drvdata(NULL) is in azx_firmware_cb() in
hda_intel.c.  Since this function itself releases the card instance,
we need to clear drvdata here as well, so that it won't be released
doubly in the remove callback.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
      20a24225
  7. 07 12月, 2012 1 次提交
  9. 12 9月, 2012 1 次提交
  11. 15 8月, 2012 1 次提交
  13. 03 7月, 2012 1 次提交
  15. 24 4月, 2012 1 次提交
  17. 19 12月, 2011 1 次提交
  19. 01 11月, 2011 1 次提交
  21. 10 6月, 2011 2 次提交
    • T
      ALSA: use KBUILD_MODNAME for request_irq argument in sound/pci/* · 934c2b6d
      由 Takashi Iwai 提交于 
      The name argument of request_irq() appears in /proc/interrupts, and
it's quite ugly when the name entry contains a space or special letters.
In general, it's simpler and more readable when the module name appears
there, so let's replace all entries with KBUILD_MODNAME.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
      934c2b6d
    • T
      ALSA: Use KBUILD_MODNAME for pci_driver.name entries · 3733e424
      由 Takashi Iwai 提交于 
      The convention for pci_driver.name entry in kernel drivers seem to be
the module name or equivalent ones.  But, so far, almost all PCI sound
drivers use more verbose name like "ABC Xyz (12)", and these are fairly
confusing when appearing as a file name.

This patch converts the all pci_driver.name entries in sound/pci/* to
use KBUILD_MODNAME for more unified appearance.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
      3733e424
  23. 31 3月, 2011 1 次提交
  25. 27 12月, 2010 1 次提交
  27. 02 11月, 2010 1 次提交
  29. 23 10月, 2010 6 次提交
  31. 07 9月, 2010 1 次提交
  33. 30 3月, 2010 1 次提交
    • T
      include cleanup: Update gfp.h and slab.h includes to prepare for breaking... · 5a0e3ad6
      由 Tejun Heo 提交于 
      include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: NTejun Heo <tj@kernel.org>
Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
      5a0e3ad6
  35. 09 2月, 2010 1 次提交
  37. 04 12月, 2009 1 次提交
  39. 05 11月, 2009 1 次提交
  41. 30 10月, 2009 1 次提交
  43. 20 7月, 2009 1 次提交
    • T
      ALSA: ca0106 - Fix the max capture buffer size · 34fdeb2d
      由 Takashi Iwai 提交于 
      The capture buffer size with 64kB seems broken with CA0106.
At least, either the update timing or the DMA position is wrong,
and this screws up pulseaudio badly.

This patch restricts the max buffer size less than that to make life
a bit easier.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Cc: <stable@kernel.org>
      34fdeb2d
  45. 25 6月, 2009 1 次提交
  47. 08 6月, 2009 1 次提交
  49. 02 6月, 2009 3 次提交
  51. 23 5月, 2009 1 次提交
  53. 07 4月, 2009 1 次提交
  55. 05 2月, 2009 2 次提交
  57. 19 1月, 2009 1 次提交
  59. 12 1月, 2009 1 次提交
  61. 20 12月, 2008 1 次提交