Convert with dev_err() and co from snd_printk(), etc.
A couple of prints are difficult to convert with dev_err() so they are
converted to pr_err() at least.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Convert with dev_err() and co from snd_printk(), etc.
A couple of prints are difficult to convert with dev_err() so they are
converted to pr_err() at least.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Convert with dev_err() and co from snd_printk(), etc.
Some debug prints are replaced with dev_dbg(), too.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Convert with dev_err() and co from snd_printk(), etc.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Convert with dev_err() and co from snd_printk(), etc.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Convert with dev_err() and co from snd_printk(), etc.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Convert with dev_err() and co from snd_printk(), etc.
The debug prints are also reformatted to suit with dev_dbg().
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Convert with dev_err() and co from snd_printk(), etc.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Convert with dev_err() and co from snd_printk(), etc.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Convert with dev_err() and co from snd_printk(), etc.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Convert with dev_err() and co from snd_printk(), etc.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Convert with dev_err() and co from snd_printk(), etc.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Convert with dev_err() and co from snd_printk(), etc.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Convert with dev_err() and co from snd_printk(), etc.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Convert with dev_err() and co from snd_printk(), etc.
Some debug prints are replaced with dev_dbg(), too.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Convert with dev_err() and co from snd_printk(), etc.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Convert with dev_err() and co from snd_printk(), etc.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Convert with dev_err() and co from snd_printk(), etc.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Convert with dev_err() and co from snd_printk(), etc.
Some commented debug prints are also enabled as dev_dbg().
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Convert with dev_err() and co from snd_printk(), etc.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Convert with dev_err() and co from snd_printk(), etc.
All debug print macros have been replaced with dev_dbg(), too.
Also, added the missing definition of snd_azf3328_ctrl_inw().
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

We have a better infrastructure in general, so let's reduce the
home-baked debug macros.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Convert with dev_err() and co from snd_printk(), etc.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Convert with dev_err() and co from snd_printk(), etc.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Convert with dev_err() and co from snd_printk(), etc.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Convert with dev_err() and co from snd_printk(), etc.
Also, correct the printk level appropriately.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

We have a better infrastructure in general, so let's reduce the
home-baked debug macros.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Convert with dev_err() and co from snd_printk(), etc.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This driver slipped from the last rewrite.  Just convert to the new
standard pm ops.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The GPIO line used for the mute LED control on Lenovo Yxx0 laptops is
cleared unexpectedly when the codec goes to D3, typically by
power-saving.  For avoiding it, add a power filter in the fixup.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=16373Signed-off-by: NTakashi Iwai <tiwai@suse.de>

'snd_rawmidi_transmit_reset()' and 'snd_rawmidi_receive_reset()' are declared
but not defined.

This state has been continue over 10 years. So let us remove them.
Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

While moving the card device into struct snd_card, the reference to
the assigned card in sysfs show/store callbacks were forgotten to be
refreshed, still accessing to the no longer used drvdata.  Fix these
places to refer correctly via container_of().

Also, remove the superfluous NULL checks since it's guaranteed to be
non-NULL now.

Fixes: 8bfb181c ('ALSA: Embed card device into struct snd_card')
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Avoid traversing the device object list of the card instance just for
checking the PCM streams.  The driver's private object already
contains the array of substream pointers, so it can be simply looked
through.  The card internal may be restructured in future, thus better
not to rely on it.

Also, this fixes the possible deadlocks in PCM mutex.  Instead of
taking multiple PCM mutexes, just take the common mutex in all
places.  Along with it, rename prepare_mutex as pcm_mutex.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Some codec drivers still have it since using PCI_VENDOR_ID_*.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Realtek codec driver contains some codes referring to the PCI
subdevice IDs, but most of them are optional, typically for checking
the codec name variants.  Add NULL checks appropriately so that it can
work without PCI assignment.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The default parent device can be obtained directly via card object, so
we don't need to rely on pci->dev.parent.  Since there is no access to
pci_dev, we can reduce the inclusion of linux/pci.h, too.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Function del_timer() does not guarantee that timer was really deleted.
If the timer handler is beeing executed at the moment, the function
does nothing. So, it's possible to use already freed memory in the handler:

[ref: Documentation/DocBook/kernel-locking.tmpl]

This was found using grep and compile-tested only.
Signed-off-by: NKirill Tkhai <ktkhai@parallels.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Using __bitwise and typedefs for the attributes of snd_device struct
isn't so useful, and rather it worsens the readability.  Let's drop
them and use the straightforward enum.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

... instead of SNDRV_DEV_LOWLEVEL.
No functional change at this point.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>