It should be possible to build pcspkr driver together with snd-pcsp,
even though tehy can not be used together.
Signed-off-by: NStas Sergeev <stsp@aknet.ru>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

The SW_RADIO code for EV_SW events has a name that is not descriptive
enough of its intended function, and could induce someone to think
KEY_RADIO is its EV_KEY counterpart, which is false.

Rename it to SW_RFKILL_ALL, and document what this event is for.  Keep
the old name around, to avoid userspace ABI breaks.

The SW_RFKILL_ALL event is meant to be used by rfkill master switches.  It
is not bound to a particular radio switch type, and usually applies to all
types.  It is semantically tied to master rfkill switches that enable or
disable every radio in a system.
Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

The code would try to free 'report' twice upon input_register_device()
failure.
Reported-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

1. Set input bits for direct keys codes
2. Set input bits for rotary encoder codes only if rotary
   encoder is enabled
3. Enable EV_REL only if rotary encoder is enabled and rel_codes
   are set up
Signed-off-by: NAntonio Ospite <ao2@openezx.org>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

This will shut off garbage that may come from KBD port during resume.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Remove duplicate include file <linux/module.h>.
Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

The chip phy_init() function must be called before the dig_enable() function
but dig_enable() is called when the device is opened and we only call
phy_init() after having reigstered the device, meaning the two can race.
Fix this by doing the phy_init() before we register the input device.

Thanks to Rodolfo Giometti <giometti@enneenne.com> for the report.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Fix driver name - thanks to Guennadi Liakhovetski <g.liakhovetski@gmx.de> for
reporting this.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

phys is displayed in diagnostic output like that from evbug so ensure
that it is set to something.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Also do not fail i8042 entire initialization if enabling dritek extension
fails.
Signed-off-by: NBruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

The Acer TravelMate 660 series also requires the Dritek quirk to enable the
extra scancodes.
Signed-off-by: NBruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] macintosh: Replace deprecated __initcall with device_initcall
  [POWERPC] cell: Fix section mismatches in io-workarounds code
  [POWERPC] spufs: Fix compile error
  [POWERPC] Fix uninitialized variable bug in copy_{to|from}_user
  [POWERPC] Add null pointer check to of_find_property
  [POWERPC] vmemmap fixes to use smaller pages
  [POWERPC] spufs: Fix pointer reference in find_victim
  [POWERPC] 85xx: SBC8548 - Add flash support and HW Rev reporting
  [POWERPC] 85xx: Fix some sparse warnings for 85xx MDS
  [POWERPC] 83xx: Enable DMA engine on the MPC8377 MDS board.
  [POWERPC] 86xx: mpc8610_hpcd: fix second serial port
  [POWERPC] 86xx: mpc8610_hpcd: add support for NOR and NAND flashes
  [POWERPC] 85xx: Add 8568 PHY workarounds to board code
  [POWERPC] 86xx: mpc8610_hpcd: use ULI526X driver for on-board ethernet

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  jbd2: update transaction t_state to T_COMMIT fix
  ext4: Retry block allocation if new blocks are allocated from system zone.
  ext4: mballoc fix mb_normalize_request algorithm for 1KB block size filesystems
  ext4: fix typos in messages and comments (journalled -> journaled)
  ext4: fix synchronization of quota files in journal=data mode
  ext4: Fix mount messages when quota disabled
  ext4: correct mount option parsing to detect when quota options can be changed

This patch fixes a build bug on m68k - gcc decides to emit a call to the
strlen library function, which we don't implement.

More importantly - my previous patch "init: don't lose initcall return
values" (commit e662e1cf) had introduced
potential buffer overflow by wrong calculation of string accumulator
size.

Use strlcat() instead, fixing both bugs.

Many thanks Andreas Schwab and Geert Uytterhoeven for helping
to catch and fix the bug.
Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

One function to just loop over the entries, one function to actually do
the call and the associated debugging code.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Everybody wants to pass it a function pointer, and in fact, that is what
you _must_ pass it for it to make sense (since it knows that ia64 and
ppc64 use descriptors for function pointers and fetches the actual
address from there).

So don't make the argument be a 'unsigned long' and force everybody to
add a cast.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] fix personality(PER_LINUX32) performance issue
  [IA64] Properly unregister legacy interrupts
  [IA64] Remove NULL pointer check for argument never passed as NULL.
  [IA64] trivial cleanup for perfmon.c
  [IA64] trivial cleanup for entry.S
  [IA64] fix interrupt masking for pending works on kernel leave
  [IA64] allow user to force_pal_cache_flush
  [IA64] Don't reserve crashkernel memory > 4 GB
  [IA64] machvec support for SGI UV platform
  [IA64] Add header files for SGI UV platform

Updating the current transaction's t_state is protected by j_state_lock.  We
need to do the same when updating the t_state to T_COMMIT.
Acked-by: NJan Kara <jack@suse.cz>
Signed-off-by: NMingming Cao <cmm@us.ibm.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>

If the block allocator gets blocks out of system zone ext4 calls
ext4_error. But if the file system is mounted with errors=continue
retry block allocation. We need to mark the system zone blocks as
in use to make sure retry don't pick them again

System zone is the block range mapping block bitmap, inode bitmap and inode
table.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMingming Cao <cmm@us.ibm.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Enabling the BKL to be lockdep tracked uncovered the following
upstream kernel bug in the tty code, which caused a BKL
reference leak:

  ================================================
  [ BUG: lock held when returning to user space! ]
  ------------------------------------------------
  dmesg/3121 is leaving the kernel with locks still held!
  1 lock held by dmesg/3121:
   #0:  (kernel_mutex){--..}, at: [<c02f34d9>] opost+0x24/0x194

this might explain some of the atomicity warnings and crashes
that -tip tree testing has been experiencing since the BKL
was converted back to a spinlock.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The patch aims to fix a performance issue for the syscall
personality(PER_LINUX32).

On IA-64 box, the syscall personality (PER_LINUX32) has poor performance
because it failed to find the Linux/x86 execution domain. Then it tried
to load the kernel module however it failed always and it used the default
execution domain PER_LINUX instead. Requesting kernel modules is very
expensive. It caused the performance issue. (see the function
lookup_exec_domain in kernel/exec_domain.c).

To resolve the issue, execution domain Linux/x86 is always registered in
initialization time for IA-64 architecture.
Signed-off-by: NXiaolan Huang <xiaolan.huang@intel.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
  [S390] show_interrupts: prevent cpu hotplug when walking cpu_online_map.
  [S390] smp: __smp_call_function_map vs cpu_online_map fix.
  [S390] tape: Use ccw_dev_id to build cdev_id.
  [S390] dasd: fix timeout handling in interrupt handler
  [S390] s390dbf: Use const char * for dbf name.
  [S390] dasd: Use const in busid functions.
  [S390] blacklist.c: removed duplicated include
  [S390] vmlogrdr: module initialization function should return negative errors
  [S390] sparsemem vmemmap: initialize memmap.
  [S390] Remove last traces of cio_msg=.
  [S390] cio: Remove CCW_CMD_SUSPEND_RECONN in front of CCW_CMD_SET_PGID.

* git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6:
  arch/parisc/kernel/perf_asm.S: build fix
  parisc: remove -traditional from assembler flags
  parisc: use conditional macro for 64-bit wide ops
  parisc: Remove ioctl.h content picked up from <asm-generic/ioctl.h>.
  arch/parisc/kernel/unaligned.c: use time_* macros
  parisc: remove redundant display of free swap space in show_mem()
  drivers/parisc: replace remaining __FUNCTION__ occurrences
  parisc: replace remaining __FUNCTION__ occurrences
  parisc: new termios definitions
  parisc: fix trivial section name warnings

Missing <linux/init.h> header for __HEAD macro.
Signed-off-by: NKyle McMartin <kyle@mcmartin.ca>

Signed-off-by: NKyle McMartin <kyle@mcmartin.ca>

This work enables us to remove -traditional from $AFLAGS on
parisc.
Signed-off-by: NKyle McMartin <kyle@mcmartin.ca>

Now that <asm-generic/ioctl.h> allows overriding of the most commonly
changed macro values, take advantage of that.
Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: NKyle McMartin <kyle@mcmartin.ca>

Surround all the code withing show_interrupts() with
get/put_online_cpus() to prevent strange results wrt cpu hotplug.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Both smp_call_function() and __smp_call_function_map() access
cpu_online_map. Both functions run with preemption disabled which
protects for cpus going offline. However new cpus can be added and
therefore the cpu_online_map can change unexpectedly.
So use the call_lock to protect against changes to the cpu_online_map
in start_secondary() and all smp_call_* functions.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

To construct the integer containing the information from the bus_id,
it is easier to use the data from ccw_dev_id than to parse the bus_id.
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

When the dasd_int_handler is called with an error code instead of
an irb, the associated request should be restarted. This handling
was missing from the -ETIMEDOUT case. In fact it should be done in
any case.
Signed-off-by: NStefan Weinhuber <wein@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

We should use const char * for passing the name of the debug feature
around since it will not be changed.
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

We should use 'const char *' in the busid functions since the
strings are not modified anyway.
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Removed duplicated include <asm/cio.h>
in drivers/s390/cio/blacklist.c.
Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Let's just use the generic vmmemmap_alloc_block() function which
always returns initialized memory.

Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

cio_msg= is gone, also remove it from kernel-parameters.txt.
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

CCW_CMD_SUSPEND_RECONN causes a system hang if the cable of a
reserved DASD is disconnected and connected again.
Signed-off-by: NMichael Ernst <mernst@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

The functions time_before, time_before_eq, time_after, and time_after_eq are
more robust for comparing jiffies against other values.

So use the time_after() macro, defined in linux/jiffies.h, which deals with
wrapping correctl

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NS.Caglar Onur <caglar@pardus.org.tr>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NKyle McMartin <kyle@mcmartin.ca>