Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] macintosh: Replace deprecated __initcall with device_initcall
  [POWERPC] cell: Fix section mismatches in io-workarounds code
  [POWERPC] spufs: Fix compile error
  [POWERPC] Fix uninitialized variable bug in copy_{to|from}_user
  [POWERPC] Add null pointer check to of_find_property
  [POWERPC] vmemmap fixes to use smaller pages
  [POWERPC] spufs: Fix pointer reference in find_victim
  [POWERPC] 85xx: SBC8548 - Add flash support and HW Rev reporting
  [POWERPC] 85xx: Fix some sparse warnings for 85xx MDS
  [POWERPC] 83xx: Enable DMA engine on the MPC8377 MDS board.
  [POWERPC] 86xx: mpc8610_hpcd: fix second serial port
  [POWERPC] 86xx: mpc8610_hpcd: add support for NOR and NAND flashes
  [POWERPC] 85xx: Add 8568 PHY workarounds to board code
  [POWERPC] 86xx: mpc8610_hpcd: use ULI526X driver for on-board ethernet

arch/powerpc/boot/dts/mpc8377_mds.dts

@@ -268,6 +268,33 @@
 			interrupt-parent = <&ipic>;
 		};
 
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8349-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <0x47 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8349-dma-channel";
+				reg = <0 0x80>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8349-dma-channel";
+				reg = <0x80 0x80>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8349-dma-channel";
+				reg = <0x100 0x80>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8349-dma-channel";
+				reg = <0x180 0x28>;
+			};
+		};
+
 		/* IPIC
 		 * interrupts cell = <intr #, sense>
 		 * sense values match linux IORESOURCE_IRQ_* defines:

arch/powerpc/boot/dts/mpc8610_hpcd.dts

@@ -46,9 +46,63 @@
 		reg = <0x00000000 0x20000000>;	// 512M at 0x0
 	};
 
-	board-control@e8000000 {
-		compatible = "fsl,fpga-pixis";
-		reg = <0xe8000000 32>;		// pixis at 0xe8000000
+	localbus@e0005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8610-elbc", "fsl,elbc", "simple-bus";
+		reg = <0xe0005000 0x1000>;
+		interrupts = <19 2>;
+		interrupt-parent = <&mpic>;
+		ranges = <0 0 0xf8000000 0x08000000
+			  1 0 0xf0000000 0x08000000
+			  2 0 0xe8400000 0x00008000
+			  4 0 0xe8440000 0x00008000
+			  5 0 0xe8480000 0x00008000
+			  6 0 0xe84c0000 0x00008000
+			  3 0 0xe8000000 0x00000020>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x8000000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		flash@1,0 {
+			compatible = "cfi-flash";
+			reg = <1 0 0x8000000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		flash@2,0 {
+			compatible = "fsl,mpc8610-fcm-nand",
+				     "fsl,elbc-fcm-nand";
+			reg = <2 0 0x8000>;
+		};
+
+		flash@4,0 {
+			compatible = "fsl,mpc8610-fcm-nand",
+				     "fsl,elbc-fcm-nand";
+			reg = <4 0 0x8000>;
+		};
+
+		flash@5,0 {
+			compatible = "fsl,mpc8610-fcm-nand",
+				     "fsl,elbc-fcm-nand";
+			reg = <5 0 0x8000>;
+		};
+
+		flash@6,0 {
+			compatible = "fsl,mpc8610-fcm-nand",
+				     "fsl,elbc-fcm-nand";
+			reg = <6 0 0x8000>;
+		};
+
+		board-control@3,0 {
+			compatible = "fsl,fpga-pixis";
+			reg = <3 0 0x20>;
+		};
 	};
 
 	soc@e0000000 {

arch/powerpc/boot/dts/sbc8548.dts

@@ -52,6 +52,99 @@
 		reg = <0x00000000 0x10000000>;
 	};
 
+	localbus@e0000000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		reg = <0xe0000000 0x5000>;
+		interrupt-parent = <&mpic>;
+
+		ranges = <0x0 0x0 0xff800000 0x00800000		/*8MB Flash*/
+			  0x3 0x0 0xf0000000 0x04000000		/*64MB SDRAM*/
+			  0x4 0x0 0xf4000000 0x04000000 	/*64MB SDRAM*/
+			  0x5 0x0 0xf8000000 0x00b10000		/* EPLD */
+			  0x6 0x0 0xfb800000 0x04000000>;	/*64MB Flash*/
+
+
+		flash@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x800000>;
+			bank-width = <1>;
+			device-width = <1>;
+			partition@0x0 {
+				label = "space";
+				reg = <0x00000000 0x00100000>;
+			};
+			partition@0x100000 {
+				label = "bootloader";
+				reg = <0x00100000 0x00700000>;
+				read-only;
+			};
+		};
+
+		epld@5,0 {
+			compatible = "wrs,epld-localbus";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			reg = <0x5 0x0 0x00b10000>;
+			ranges = <
+				0x0 0x0 0x5 0x000000 0x1fff	/* LED */
+				0x1 0x0 0x5 0x100000 0x1fff	/* Switches */
+				0x3 0x0 0x5 0x300000 0x1fff	/* HW Rev. */
+				0xb 0x0	0x5 0xb00000 0x1fff	/* EEPROM */
+			>;
+
+			led@0,0 {
+				compatible = "led";
+				reg = <0x0 0x0 0x1fff>;
+			};
+
+			switches@1,0 {
+				compatible = "switches";
+				reg = <0x1 0x0 0x1fff>;
+			};
+
+			hw-rev@3,0 {
+				compatible = "hw-rev";
+				reg = <0x3 0x0 0x1fff>;
+			};
+
+			eeprom@b,0 {
+				compatible = "eeprom";
+				reg = <0xb 0 0x1fff>;
+			};
+
+		};
+
+		alt-flash@6,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x6 0x0 0x04000000>;
+			compatible = "cfi-flash";
+			bank-width = <4>;
+			device-width = <1>;
+			partition@0x0 {
+				label = "bootloader";
+				reg = <0x00000000 0x00100000>;
+				read-only;
+			};
+			partition@0x00100000 {
+				label = "file-system";
+				reg = <0x00100000 0x01f00000>;
+			};
+			partition@0x02000000 {
+				label = "boot-config";
+				reg = <0x02000000 0x00100000>;
+			};
+			partition@0x02100000 {
+				label = "space";
+				reg = <0x02100000 0x01f00000>;
+			};
+                };
+        };
+
 	soc8548@e0000000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -59,6 +152,7 @@
 		ranges = <0x00000000 0xe0000000 0x00100000>;
 		reg = <0xe0000000 0x00001000>;	// CCSRBAR
 		bus-frequency = <0>;
+		compatible = "simple-bus";
 
 		memory-controller@2000 {
 			compatible = "fsl,8548-memory-controller";

arch/powerpc/configs/mpc8610_hpcd_defconfig

@@ -358,7 +358,93 @@ CONFIG_FW_LOADER=y
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_NAND_FSL_ELBC=y
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
@@ -567,14 +653,11 @@ CONFIG_MII=y
 # CONFIG_NET_VENDOR_3COM is not set
 CONFIG_NET_TULIP=y
 # CONFIG_DE2104X is not set
-CONFIG_TULIP=y
-# CONFIG_TULIP_MWI is not set
-CONFIG_TULIP_MMIO=y
-# CONFIG_TULIP_NAPI is not set
+# CONFIG_TULIP is not set
 # CONFIG_DE4X5 is not set
 # CONFIG_WINBOND_840 is not set
 # CONFIG_DM9102 is not set
-# CONFIG_ULI526X is not set
+CONFIG_ULI526X=y
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set

arch/powerpc/mm/hash_utils_64.c

@@ -94,6 +94,9 @@ unsigned long htab_hash_mask;
 int mmu_linear_psize = MMU_PAGE_4K;
 int mmu_virtual_psize = MMU_PAGE_4K;
 int mmu_vmalloc_psize = MMU_PAGE_4K;
+#ifdef CONFIG_SPARSEMEM_VMEMMAP
+int mmu_vmemmap_psize = MMU_PAGE_4K;
+#endif
 int mmu_io_psize = MMU_PAGE_4K;
 int mmu_kernel_ssize = MMU_SEGSIZE_256M;
 int mmu_highuser_ssize = MMU_SEGSIZE_256M;
@@ -387,11 +390,32 @@ static void __init htab_init_page_sizes(void)
 	}
 #endif /* CONFIG_PPC_64K_PAGES */
 
+#ifdef CONFIG_SPARSEMEM_VMEMMAP
+	/* We try to use 16M pages for vmemmap if that is supported
+	 * and we have at least 1G of RAM at boot
+	 */
+	if (mmu_psize_defs[MMU_PAGE_16M].shift &&
+	    lmb_phys_mem_size() >= 0x40000000)
+		mmu_vmemmap_psize = MMU_PAGE_16M;
+	else if (mmu_psize_defs[MMU_PAGE_64K].shift)
+		mmu_vmemmap_psize = MMU_PAGE_64K;
+	else
+		mmu_vmemmap_psize = MMU_PAGE_4K;
+#endif /* CONFIG_SPARSEMEM_VMEMMAP */
+
 	printk(KERN_DEBUG "Page orders: linear mapping = %d, "
-	       "virtual = %d, io = %d\n",
+	       "virtual = %d, io = %d"
+#ifdef CONFIG_SPARSEMEM_VMEMMAP
+	       ", vmemmap = %d"
+#endif
+	       "\n",
 	       mmu_psize_defs[mmu_linear_psize].shift,
 	       mmu_psize_defs[mmu_virtual_psize].shift,
-	       mmu_psize_defs[mmu_io_psize].shift);
+	       mmu_psize_defs[mmu_io_psize].shift
+#ifdef CONFIG_SPARSEMEM_VMEMMAP
+	       ,mmu_psize_defs[mmu_vmemmap_psize].shift
+#endif
+	       );
 
 #ifdef CONFIG_HUGETLB_PAGE
 	/* Init large page size. Currently, we pick 16M or 1M depending

arch/powerpc/mm/init_64.c

@@ -19,6 +19,8 @@
  *
  */
 
+#undef DEBUG
+
 #include <linux/signal.h>
 #include <linux/sched.h>
 #include <linux/kernel.h>
@@ -208,12 +210,12 @@ int __meminit vmemmap_populated(unsigned long start, int page_size)
 }
 
 int __meminit vmemmap_populate(struct page *start_page,
-					unsigned long nr_pages, int node)
+			       unsigned long nr_pages, int node)
 {
 	unsigned long mode_rw;
 	unsigned long start = (unsigned long)start_page;
 	unsigned long end = (unsigned long)(start_page + nr_pages);
-	unsigned long page_size = 1 << mmu_psize_defs[mmu_linear_psize].shift;
+	unsigned long page_size = 1 << mmu_psize_defs[mmu_vmemmap_psize].shift;
 
 	mode_rw = _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_COHERENT | PP_RWXX;
 
@@ -235,11 +237,11 @@ int __meminit vmemmap_populate(struct page *start_page,
 			start, p, __pa(p));
 
 		mapped = htab_bolt_mapping(start, start + page_size,
-					__pa(p), mode_rw, mmu_linear_psize,
+					__pa(p), mode_rw, mmu_vmemmap_psize,
 					mmu_kernel_ssize);
 		BUG_ON(mapped < 0);
 	}
 
 	return 0;
 }
-#endif
+#endif /* CONFIG_SPARSEMEM_VMEMMAP */

arch/powerpc/mm/slb.c

@@ -28,7 +28,7 @@
 #include <asm/udbg.h>
 
 #ifdef DEBUG
-#define DBG(fmt...) udbg_printf(fmt)
+#define DBG(fmt...) printk(fmt)
 #else
 #define DBG pr_debug
 #endif
@@ -263,13 +263,19 @@ void slb_initialize(void)
 	extern unsigned int *slb_miss_kernel_load_linear;
 	extern unsigned int *slb_miss_kernel_load_io;
 	extern unsigned int *slb_compare_rr_to_size;
+#ifdef CONFIG_SPARSEMEM_VMEMMAP
+	extern unsigned int *slb_miss_kernel_load_vmemmap;
+	unsigned long vmemmap_llp;
+#endif
 
 	/* Prepare our SLB miss handler based on our page size */
 	linear_llp = mmu_psize_defs[mmu_linear_psize].sllp;
 	io_llp = mmu_psize_defs[mmu_io_psize].sllp;
 	vmalloc_llp = mmu_psize_defs[mmu_vmalloc_psize].sllp;
 	get_paca()->vmalloc_sllp = SLB_VSID_KERNEL | vmalloc_llp;
-
+#ifdef CONFIG_SPARSEMEM_VMEMMAP
+	vmemmap_llp = mmu_psize_defs[mmu_vmemmap_psize].sllp;
+#endif
 	if (!slb_encoding_inited) {
 		slb_encoding_inited = 1;
 		patch_slb_encoding(slb_miss_kernel_load_linear,
@@ -281,6 +287,12 @@ void slb_initialize(void)
 
 		DBG("SLB: linear  LLP = %04lx\n", linear_llp);
 		DBG("SLB: io      LLP = %04lx\n", io_llp);
+
+#ifdef CONFIG_SPARSEMEM_VMEMMAP
+		patch_slb_encoding(slb_miss_kernel_load_vmemmap,
+				   SLB_VSID_KERNEL | vmemmap_llp);
+		DBG("SLB: vmemmap LLP = %04lx\n", vmemmap_llp);
+#endif
 	}
 
 	get_paca()->stab_rr = SLB_NUM_BOLTED;

arch/powerpc/mm/slb_low.S

@@ -47,8 +47,7 @@ _GLOBAL(slb_allocate_realmode)
 	 * it to VSID 0, which is reserved as a bad VSID - one which
 	 * will never have any pages in it.  */
 
-	/* Check if hitting the linear mapping of the vmalloc/ioremap
-	 * kernel space
+	/* Check if hitting the linear mapping or some other kernel space
 	*/
 	bne	cr7,1f
 
@@ -62,7 +61,18 @@ BEGIN_FTR_SECTION
 END_FTR_SECTION_IFCLR(CPU_FTR_1T_SEGMENT)
 	b	slb_finish_load_1T
 
-1:	/* vmalloc/ioremap mapping encoding bits, the "li" instructions below
+1:
+#ifdef CONFIG_SPARSEMEM_VMEMMAP
+	/* Check virtual memmap region. To be patches at kernel boot */
+	cmpldi	cr0,r9,0xf
+	bne	1f
+_GLOBAL(slb_miss_kernel_load_vmemmap)
+	li	r11,0
+	b	6f
+1:
+#endif /* CONFIG_SPARSEMEM_VMEMMAP */
+
+	/* vmalloc/ioremap mapping encoding bits, the "li" instructions below
 	 * will be patched by the kernel at boot
 	 */
 BEGIN_FTR_SECTION

arch/powerpc/platforms/85xx/mpc85xx_mds.c

@@ -32,6 +32,7 @@
 #include <linux/fsl_devices.h>
 #include <linux/of_platform.h>
 #include <linux/of_device.h>
+#include <linux/phy.h>
 
 #include <asm/system.h>
 #include <asm/atomic.h>
@@ -56,6 +57,95 @@
 #define DBG(fmt...)
 #endif
 
+#define MV88E1111_SCR	0x10
+#define MV88E1111_SCR_125CLK	0x0010
+static int mpc8568_fixup_125_clock(struct phy_device *phydev)
+{
+	int scr;
+	int err;
+
+	/* Workaround for the 125 CLK Toggle */
+	scr = phy_read(phydev, MV88E1111_SCR);
+
+	if (scr < 0)
+		return scr;
+
+	err = phy_write(phydev, MV88E1111_SCR, scr & ~(MV88E1111_SCR_125CLK));
+
+	if (err)
+		return err;
+
+	err = phy_write(phydev, MII_BMCR, BMCR_RESET);
+
+	if (err)
+		return err;
+
+	scr = phy_read(phydev, MV88E1111_SCR);
+
+	if (scr < 0)
+		return err;
+
+	err = phy_write(phydev, MV88E1111_SCR, scr | 0x0008);
+
+	return err;
+}
+
+static int mpc8568_mds_phy_fixups(struct phy_device *phydev)
+{
+	int temp;
+	int err;
+
+	/* Errata */
+	err = phy_write(phydev,29, 0x0006);
+
+	if (err)
+		return err;
+
+	temp = phy_read(phydev, 30);
+
+	if (temp < 0)
+		return temp;
+
+	temp = (temp & (~0x8000)) | 0x4000;
+	err = phy_write(phydev,30, temp);
+
+	if (err)
+		return err;
+
+	err = phy_write(phydev,29, 0x000a);
+
+	if (err)
+		return err;
+
+	temp = phy_read(phydev, 30);
+
+	if (temp < 0)
+		return temp;
+
+	temp = phy_read(phydev, 30);
+
+	if (temp < 0)
+		return temp;
+
+	temp &= ~0x0020;
+
+	err = phy_write(phydev,30,temp);
+
+	if (err)
+		return err;
+
+	/* Disable automatic MDI/MDIX selection */
+	temp = phy_read(phydev, 16);
+
+	if (temp < 0)
+		return temp;
+
+	temp &= ~0x0060;
+	err = phy_write(phydev,16,temp);
+
+	return err;
+}
+
 /* ************************************************************************
  *
  * Setup the architecture
@@ -64,7 +154,7 @@
 static void __init mpc85xx_mds_setup_arch(void)
 {
 	struct device_node *np;
-	static u8 *bcsr_regs = NULL;
+	static u8 __iomem *bcsr_regs = NULL;
 
 	if (ppc_md.progress)
 		ppc_md.progress("mpc85xx_mds_setup_arch()", 0);
@@ -138,6 +228,35 @@ static void __init mpc85xx_mds_setup_arch(void)
 #endif	/* CONFIG_QUICC_ENGINE */
 }
 
+
+static int __init board_fixups(void)
+{
+	char phy_id[BUS_ID_SIZE];
+	char *compstrs[2] = {"fsl,gianfar-mdio", "fsl,ucc-mdio"};
+	struct device_node *mdio;
+	struct resource res;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(compstrs); i++) {
+		mdio = of_find_compatible_node(NULL, NULL, compstrs[i]);
+
+		of_address_to_resource(mdio, 0, &res);
+		snprintf(phy_id, BUS_ID_SIZE, "%x:%02x", res.start, 1);
+
+		phy_register_fixup_for_id(phy_id, mpc8568_fixup_125_clock);
+		phy_register_fixup_for_id(phy_id, mpc8568_mds_phy_fixups);
+
+		/* Register a workaround for errata */
+		snprintf(phy_id, BUS_ID_SIZE, "%x:%02x", res.start, 7);
+		phy_register_fixup_for_id(phy_id, mpc8568_mds_phy_fixups);
+
+		of_node_put(mdio);
+	}
+
+	return 0;
+}
+machine_arch_initcall(mpc85xx_mds, board_fixups);
+
 static struct of_device_id mpc85xx_ids[] = {
 	{ .type = "soc", },
 	{ .compatible = "soc", },

arch/powerpc/platforms/85xx/sbc8548.c

@@ -49,6 +49,8 @@
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
 
+static int sbc_rev;
+
 static void __init sbc8548_pic_init(void)
 {
 	struct mpic *mpic;
@@ -79,6 +81,30 @@ static void __init sbc8548_pic_init(void)
 	mpic_init(mpic);
 }
 
+/* Extract the HW Rev from the EPLD on the board */
+static int __init sbc8548_hw_rev(void)
+{
+	struct device_node *np;
+	struct resource res;
+	unsigned int *rev;
+	int board_rev = 0;
+
+	np = of_find_compatible_node(NULL, NULL, "hw-rev");
+	if (np == NULL) {
+		printk("No HW-REV found in DTB.\n");
+		return -ENODEV;
+	}
+
+	of_address_to_resource(np, 0, &res);
+	of_node_put(np);
+
+	rev = ioremap(res.start,sizeof(unsigned int));
+	board_rev = (*rev) >> 28;
+	iounmap(rev);
+
+	return board_rev;
+}
+
 /*
  * Setup the architecture
  */
@@ -104,6 +130,7 @@ static void __init sbc8548_setup_arch(void)
 		}
 	}
 #endif
+	sbc_rev = sbc8548_hw_rev();
 }
 
 static void sbc8548_show_cpuinfo(struct seq_file *m)
@@ -115,7 +142,7 @@ static void sbc8548_show_cpuinfo(struct seq_file *m)
 	svid = mfspr(SPRN_SVR);
 
 	seq_printf(m, "Vendor\t\t: Wind River\n");
-	seq_printf(m, "Machine\t\t: SBC8548\n");
+	seq_printf(m, "Machine\t\t: SBC8548 v%d\n", sbc_rev);
 	seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
 	seq_printf(m, "SVR\t\t: 0x%x\n", svid);
 
@@ -130,6 +157,7 @@ static void sbc8548_show_cpuinfo(struct seq_file *m)
 static struct of_device_id __initdata of_bus_ids[] = {
 	{ .name = "soc", },
 	{ .type = "soc", },
+	{ .compatible = "simple-bus", },
 	{},
 };
 

arch/powerpc/platforms/86xx/mpc8610_hpcd.c

@@ -43,6 +43,7 @@ static unsigned char *pixis_bdcfg0, *pixis_arch;
 
 static struct of_device_id __initdata mpc8610_ids[] = {
 	{ .compatible = "fsl,mpc8610-immr", },
+	{ .compatible = "simple-bus", },
 	{}
 };
 
@@ -216,11 +217,21 @@ void mpc8610hpcd_set_gamma_table(int monitor_port, char *gamma_table_base)
 	}
 }
 
+#define PX_BRDCFG0_DVISEL	(1 << 3)
+#define PX_BRDCFG0_DLINK	(1 << 4)
+#define PX_BRDCFG0_DIU_MASK	(PX_BRDCFG0_DVISEL | PX_BRDCFG0_DLINK)
+
 void mpc8610hpcd_set_monitor_port(int monitor_port)
 {
-	static const u8 bdcfg[] = {0xBD, 0xB5, 0xA5};
+	static const u8 bdcfg[] = {
+		PX_BRDCFG0_DVISEL | PX_BRDCFG0_DLINK,
+		PX_BRDCFG0_DLINK,
+		0,
+	};
+
 	if (monitor_port < 3)
-		*pixis_bdcfg0 = bdcfg[monitor_port];
+		clrsetbits_8(pixis_bdcfg0, PX_BRDCFG0_DIU_MASK,
+			     bdcfg[monitor_port]);
 }
 
 void mpc8610hpcd_set_pixel_clock(unsigned int pixclock)

arch/powerpc/platforms/cell/io-workarounds.c

@@ -118,7 +118,7 @@ static void iowa_##name at					\
 #undef DEF_PCI_AC_RET
 #undef DEF_PCI_AC_NORET
 
-static struct ppc_pci_io __initdata iowa_pci_io = {
+static const struct ppc_pci_io __devinitconst iowa_pci_io = {
 
 #define DEF_PCI_AC_RET(name, ret, at, al, space, aa)	.name = iowa_##name,
 #define DEF_PCI_AC_NORET(name, at, al, space, aa)	.name = iowa_##name,
@@ -146,7 +146,7 @@ static void __iomem *iowa_ioremap(unsigned long addr, unsigned long size,
 }
 
 /* Regist new bus to support workaround */
-void __init iowa_register_bus(struct pci_controller *phb,
+void __devinit iowa_register_bus(struct pci_controller *phb,
 			struct ppc_pci_io *ops,
 			int (*initfunc)(struct iowa_bus *, void *), void *data)
 {
@@ -173,7 +173,7 @@ void __init iowa_register_bus(struct pci_controller *phb,
 }
 
 /* enable IO workaround */
-void __init io_workaround_init(void)
+void __devinit io_workaround_init(void)
 {
 	static int io_workaround_inited;
 

arch/powerpc/platforms/cell/io-workarounds.h

@@ -31,9 +31,9 @@ struct iowa_bus {
 	void   *private;
 };
 
-void __init io_workaround_init(void);
-void __init iowa_register_bus(struct pci_controller *, struct ppc_pci_io *,
-			      int (*)(struct iowa_bus *, void *), void *);
+void __devinit io_workaround_init(void);
+void __devinit iowa_register_bus(struct pci_controller *, struct ppc_pci_io *,
+				 int (*)(struct iowa_bus *, void *), void *);
 struct iowa_bus *iowa_mem_find_bus(const PCI_IO_ADDR);
 struct iowa_bus *iowa_pio_find_bus(unsigned long);
 

arch/powerpc/platforms/cell/spufs/file.c

@@ -32,6 +32,7 @@
 #include <linux/marker.h>
 
 #include <asm/io.h>
+#include <asm/time.h>
 #include <asm/spu.h>
 #include <asm/spu_info.h>
 #include <asm/uaccess.h>

arch/powerpc/platforms/cell/spufs/sched.c

@@ -659,7 +659,7 @@ static struct spu *find_victim(struct spu_context *ctx)
 
 			victim->stats.invol_ctx_switch++;
 			spu->stats.invol_ctx_switch++;
-			if (test_bit(SPU_SCHED_SPU_RUN, &ctx->sched_flags))
+			if (test_bit(SPU_SCHED_SPU_RUN, &victim->sched_flags))
 				spu_add_to_rq(victim);
 
 			mutex_unlock(&victim->state_mutex);

drivers/macintosh/adb.c

@@ -334,7 +334,7 @@ int __init adb_init(void)
 	return 0;
 }
 
-__initcall(adb_init);
+device_initcall(adb_init);
 
 static int
 do_adb_reset_bus(void)

drivers/of/base.c

@@ -65,6 +65,9 @@ struct property *of_find_property(const struct device_node *np,
 {
 	struct property *pp;
 
+	if (!np)
+		return NULL;
+
 	read_lock(&devtree_lock);
 	for (pp = np->properties; pp != 0; pp = pp->next) {
 		if (of_prop_cmp(pp->name, name) == 0) {

include/asm-powerpc/mmu-hash64.h

@@ -177,6 +177,7 @@ extern struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT];
 extern int mmu_linear_psize;
 extern int mmu_virtual_psize;
 extern int mmu_vmalloc_psize;
+extern int mmu_vmemmap_psize;
 extern int mmu_io_psize;
 extern int mmu_kernel_ssize;
 extern int mmu_highuser_ssize;

include/asm-powerpc/pgtable-ppc64.h

@@ -65,15 +65,15 @@
 
 #define VMALLOC_REGION_ID	(REGION_ID(VMALLOC_START))
 #define KERNEL_REGION_ID	(REGION_ID(PAGE_OFFSET))
+#define VMEMMAP_REGION_ID	(0xfUL)
 #define USER_REGION_ID		(0UL)
 
 /*
- * Defines the address of the vmemap area, in the top 16th of the
- * kernel region.
+ * Defines the address of the vmemap area, in its own region
  */
-#define VMEMMAP_BASE (ASM_CONST(CONFIG_KERNEL_START) + \
-					(0xfUL << (REGION_SHIFT - 4)))
-#define vmemmap ((struct page *)VMEMMAP_BASE)
+#define VMEMMAP_BASE		(VMEMMAP_REGION_ID << REGION_SHIFT)
+#define vmemmap			((struct page *)VMEMMAP_BASE)
+
 
 /*
  * Common bits in a linux-style PTE.  These match the bits in the

include/asm-powerpc/uaccess.h

@@ -380,7 +380,7 @@ static inline unsigned long __copy_from_user_inatomic(void *to,
 		const void __user *from, unsigned long n)
 {
 	if (__builtin_constant_p(n) && (n <= 8)) {
-		unsigned long ret;
+		unsigned long ret = 1;
 
 		switch (n) {
 		case 1:
@@ -406,7 +406,7 @@ static inline unsigned long __copy_to_user_inatomic(void __user *to,
 		const void *from, unsigned long n)
 {
 	if (__builtin_constant_p(n) && (n <= 8)) {
-		unsigned long ret;
+		unsigned long ret = 1;
 
 		switch (n) {
 		case 1: