There's a rather long standing regression from the commit "libiscsi:
Reduce locking contention in fast path"

Depending on iSCSI target behavior, it's possible to hit the case in
iscsi_complete_task where the task is still on a pending list
(!list_empty(&task->running)).  When that happens the task is removed
from the list while holding the session back_lock, but other task list
modification occur under the frwd_lock.  That leads to linked list
corruption and eventually a panicked system.

Rather than back out the session lock split entirely, in order to try
and keep some of the performance gains this patch adds another lock to
maintain the task lists integrity.

Major enterprise supported kernels have been backing out the lock split
for while now, thanks to the efforts at IBM where a lab setup has the
most reliable reproducer I've seen on this issue.  This patch has been
tested there successfully.
Signed-off-by: NChris Leech <cleech@redhat.com>
Fixes: 659743b0 ("[SCSI] libiscsi: Reduce locking contention in fast path")
Reported-by: NPrashantha Subbarao <psubbara@us.ibm.com>
Reviewed-by: NGuilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Cc: <stable@vger.kernel.org> # v3.15+
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The call to qedi_setup_int is not updating the return code rc yet rc is
being checked for an error. Fix this by assigning rc to the return code
from the call to qedi_setup_int.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Acked-by: NManish Rangankar <Manish.Rangankar@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Signed-off-by: NManish Rangankar <manish.rangankar@cavium.com>
Signed-off-by: NChad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The check for ret being zero is redundant as a few statements earlier we
break out of the while loop if ret is non-zero.  Thus we can remove the
zero check and also the dead-code non-zero case too.

Detected by CoverityScan, CID#1411632 ("Logically Dead Code")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Acked-by: NDave Carroll <david.carroll@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

dma_addr_t may be either u32 or u64, depending on the kernel configuration,
and we get a warning for the 32-bit case:

drivers/scsi/lpfc/lpfc_nvme.c: In function 'lpfc_nvme_ls_req':
drivers/scsi/lpfc/lpfc_logmsg.h:52:52: error: format '%llu' expects argument of type 'long long unsigned int', but argument 11 has type 'dma_addr_t {aka unsigned int}' [-Werror=format=]
drivers/scsi/lpfc/lpfc_logmsg.h:52:52: error: format '%llu' expects argument of type 'long long unsigned int', but argument 12 has type 'dma_addr_t {aka unsigned int}' [-Werror=format=]
drivers/scsi/lpfc/lpfc_nvme.c: In function 'lpfc_nvme_ls_abort':
drivers/scsi/lpfc/lpfc_logmsg.h:52:52: error: format '%llu' expects argument of type 'long long unsigned int', but argument 11 has type 'dma_addr_t {aka unsigned int}' [-Werror=format=]
drivers/scsi/lpfc/lpfc_logmsg.h:52:52: error: format '%llu' expects argument of type 'long long unsigned int', but argument 12 has type 'dma_addr_t {aka unsigned int}' [-Werror=format=]

printk has a special "%pad" format string that passes the dma address by
reference to solve this problem.

Fixes: 01649561 ("scsi: lpfc: NVME Initiator: bind to nvme_fc api")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The new debugfs output causes a link error on 32-bit architectures:

ERROR: "__aeabi_uldivmod" [drivers/scsi/lpfc/lpfc.ko] undefined!

This code is not performance critical, so we can simply use div_u64().

[mkp: fixed up whitespace]

Fixes: bd2cdd5e ("scsi: lpfc: NVME Initiator: Add debugfs support")
Fixes: 2b65e182 ("scsi: lpfc: NVME Target: Add debugfs support")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The mac_scsi driver still gets disabled when SCSI=m. This should have
been fixed back when I enabled the tristate but I didn't see the bug.

Fixes: 6e9ae6d5 ("[PATCH] mac_scsi: Add module option to Kconfig")
Signed-off-by: NFinn Thain <fthain@telegraphics.com.au>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Remove device driver failed to check map error messages
Reported-by: NJohnny Bieren <jbieren@redhat.com>
Tested-by: NJohnny Bieren <jbieren@redhat.com>
Reviewed-by: NScott Teel <scott.teel@microsemi.com>
Signed-off-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Trivial fix to spelling mistake in pr_err message
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Acked-by: NHimanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Current driver Hotplug processing code skips over Enclosure channel,
therefore any addition/removal of expander enclosure is not processed.
Additionally device addition code relies on older device type, which
prevents the hotplug of adapter expanders.

Fixed by removing code that skips over Enclosure channels and using the
latest device type for addition or removal or enclosure expanders.

Fixes: 6223a39f (scsi: aacraid: Added support for hotplug)
Signed-off-by: NRaghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Reviewed-by: NDave Carroll <david.carroll@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Cleanup the MSI-X handling allowing us to use the PCI-layer provided
vector allocation.
Signed-off-by: NHannes Reinecke <hare@suse.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NSreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Based on an original patch by Hannes Reinecke.

The driver didn't follow the atomic_t vs refcount_t change, and anyway
one should be using kref_read() instead of accessing the counter inside
an kref.

Fixes: 61d8658b ("scsi: qedf: Add QLogic FastLinQ offload FCoE driver framework.)
Cc: Hannes Reinecke <hare@suse.de>
Cc: Nilesh Javali <nilesh.javali@cavium.com>
Signed-off-by: NDupuis, Chad <chad.dupuis@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

And switch all callers to use scsi_execute instead.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

All but one caller want the decoded sense header, so offer the existing
__scsi_execute helper as the public scsi_execute API to simply the
callers.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Add a sshdr argument to __scsi_execute so that we can decode the sense
data directly into the sense header instead of needing a copy of it.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

It's a tiny structure that can be allocated on the stack, don't
complicate the code by making it optional.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Remove bogus evaluations of retval and sshdr when the device is offline,
and fix a possible NULL pointer dereference by allocating the 8 byte
sized sense header on stack.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This gives us a clear state even if a command didn't return sense data.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

We accidentally return an uninitialized variable on success.

Fixes: b6ff1b14 ("[SCSI] scsi_dh: Update EMC handler")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

On an allocation failure of gd, the current exit path is via
out_free_devt which leaves sdpk still allocated and hence it gets
leaked. Fix this by correcting the order of resource free'ing with a
change in the error exit path labels.

Detected by CoverityScan, CID#1399519 ("Resource Leak")

Fixes: 0dba1314 ("scsi, block: fix duplicate bdi name registration crashes")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Reviewed-by: NBart Van Assche <Bart.VanAssche@sandisk.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Fixes the following sparse warning:

drivers/scsi/sd.c:3087:6: warning:
 symbol 'sd_devt_release' was not declared. Should it be static?
Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The QLogic FastLinQ Driver for FCoE (qedf) is the FCoE specific module
for 41000 Series Converged Network Adapters by QLogic. This patch
consists of following changes:

- MAINTAINERS Makefile and Kconfig changes for qedf
- PCI driver registration
- libfc/fcoe host level initialization
- SCSI host template initialization and callbacks
- Debugfs and log level infrastructure
- Link handling
- Firmware interface structures
- QED core module initialization
- Light L2 interface callbacks
- I/O request initialization
- Firmware I/O completion handling
- Firmware ELS request/response handling
- FIP request/response handled by the driver itself
Signed-off-by: NNilesh Javali <nilesh.javali@cavium.com>
Signed-off-by: NManish Rangankar <manish.rangankar@cavium.com>
Signed-off-by: NSaurav Kashyap <saurav.kashyap@cavium.com>
Signed-off-by: NArun Easi <arun.easi@cavium.com>
Signed-off-by: NChad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

For target mode, we need to increase minimum vectors value by one to
account for ATIO queue.

Following stack trace will be seen

Call Trace:
qla24xx_config_rings+0x15a/0x230 [qla2xxx]
qla2x00_init_rings+0x1a1/0x3a0 [qla2xxx]
qla2x00_restart_isp+0x5c/0x120 [qla2xxx]
qla2x00_abort_isp+0x138/0x430 [qla2xxx]
? __schedule+0x260/0x580
qla2x00_do_dpc+0x3bc/0x920 [qla2xxx]
? qla2x00_relogin+0x290/0x290 [qla2xxx]
? schedule+0x3a/0xa0
? qla2x00_relogin+0x290/0x290 [qla2xxx]
kthread+0x103/0x140
? __kthread_init_worker+0x40/0x40
ret_from_fork+0x29/0x40

RIP: qlt_24xx_config_rings+0x6c/0x90

[mkp: fixed Fixes: hash]

Cc: <stable@vger.kernel.org>
Fixes: 17e5fc58 ("scsi: qla2xxx: fix MSI-X vector affinity")
Signed-off-by: NMichael Hernandez <michael.hernandez@cavium.com>
Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Target mode initialization was not calculating response queue values
correctly resulting into one less MSI-X vector.

[mkp: fixed Fixes: hash]

Cc: <stable@vger.kernel.org>
Fixes: 093df737 ("scsi: qla2xxx: Fix Target mode handling with Multiqueue changes.")
Signed-off-by: NMichael Hernandez <michael.hernandez@cavium.com>
Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch cleaned up queue configuration code, such that once
initialized, we should not touch msix_count value.  This will prevent
incorrect numbers of MSI-X vectors requested while performing target
mode configuration.

[mkp: fixed Fixes: hash]

Cc: <stable@vger.kernel.org>
Fixes: d7459527 ("scsi: qla2xxx: Add multiple queue pair functionality.")
Signed-off-by: NMichael Hernandez <michael.hernandez@cavium.com>
Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Add missing Kconfig NVME dependencies.
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Update lpfc version to 11.2.0.7
Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Update copyrights to 2017 for all files touched in this patch set
Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

NVME Target: Add debugfs support

Adds debugfs snippets to cover the new NVME target functionality
Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

NVME Target: Tie in to NVME Fabrics nvmet_fc LLDD target api

Adds the routines to:
- register and deregister the FC port as a nvmet-fc targetport
- binding of nvme queues to adapter WQs
- receipt and passing of NVME LS's to transport, sending transport response
- receipt of NVME FCP CMD IUs, processing FCP target io data transmission
  commands; transmission of FCP io response
- Abort operations for tgt io exchanges

[mkp: fixed space at end of file warning]
Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

NVME Target: Merge into FC discovery

Adds NVME PRLI handling and Nameserver registrations for NVME
Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

NVME Target: Receive buffer updates

Allocates buffer pools and configures adapter interfaces to handle
receive buffer (asynchronous FCP CMD ius, first burst data)
from the adapter. Splits by protocol, etc.
Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

NVME Target: Base modifications

This set of patches adds the base modifications for NVME target support

The base modifications consist of:
- Additional module parameters or configuration tuning
- Enablement of configuration mode for NVME target. Ties into the
  queueing model put into place by the initiator basemods patches.
- Target-specific buffer pools, dma pools, sgl pools

[mkp: fixed space at end of file]
Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

NVME Initiator: Add debugfs support

Adds debugfs snippets to cover the new NVME initiator functionality
Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

NVME Initiator: Tie in to NVME Fabrics nvme_fc LLDD initiator api

Adds the routines to:
- register and deregister the FC port as a nvme-fc initiator localport
- register and deregister remote FC ports as a nvme-fc remoteport
- binding of nvme queues to adapter WQs
- send/perform NVME LS's
- send/perform NVME FCP initiator io operations
Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

NVME Initiator: Merge into FC discovery

Adds NVME PRLI support and Nameserver registrations and Queries for NVME
Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

NVME Initiator: Base modifications

This patch adds base modifications for NVME initiator support.

The base modifications consist of:
- Formal split of SLI3 rings from SLI-4 WQs (sometimes referred to as
  rings as well) as implementation now widely varies between the two.
- Addition of configuration modes:
   SCSI initiator only; NVME initiator only; NVME target only; and
   SCSI and NVME initiator.
   The configuration mode drives overall adapter configuration,
   offloads enabled, and resource splits.
   NVME support is only available on SLI-4 devices and newer fw.
- Implements the following based on configuration mode:
  - Exchange resources are split by protocol; Obviously, if only
     1 mode, then no split occurs. Default is 50/50. module attribute
     allows tuning.
  - Pools and config parameters are separated per-protocol
  - Each protocol has it's own set of queues, but share interrupt
    vectors.
     SCSI:
       SLI3 devices have few queues and the original style of queue
         allocation remains.
       SLI4 devices piggy back on an "io-channel" concept that
         eventually needs to merge with scsi-mq/blk-mq support (it is
	 underway).  For now, the paradigm continues as it existed
	 prior. io channel allocates N msix and N WQs (N=4 default)
	 and either round robins or uses cpu # modulo N for scheduling.
	 A bunch of module parameters allow the configuration to be
	 tuned.
     NVME (initiator):
       Allocates an msix per cpu (or whatever pci_alloc_irq_vectors
         gets)
       Allocates a WQ per cpu, and maps the WQs to msix on a WQ #
         modulo msix vector count basis.
       Module parameters exist to cap/control the config if desired.
  - Each protocol has its own buffer and dma pools.

I apologize for the size of the patch.
Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <james.smart@broadcom.com>

----
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Create common wq, cq, eq, rq dump functions
Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Create common wq, cq, eq, rq print functions
Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This contains code cleanups that were in the prior patch set.
This allows better review of real changes later.

minor code cleanups:
 fix indentation, punctuation, line length
 addition/reduction of whitespace
 remove unneeded parens, braces
 lpfc_debugfs_nodelist_data: print as u64 rather than byte by byte
 covert printk(KERN_ERR to pr_err
 small print string deltas
 use num_present_cpus() rather than count them
 comment updates
 rctl/type names moved to module variable, not on stack
Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>