scsi: lpfc: NVME Initiator: bind to nvme_fc api

NVME Initiator: Tie in to NVME Fabrics nvme_fc LLDD initiator api

Adds the routines to:
- register and deregister the FC port as a nvme-fc initiator localport
- register and deregister remote FC ports as a nvme-fc remoteport
- binding of nvme queues to adapter WQs
- send/perform NVME LS's
- send/perform NVME FCP initiator io operations
Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

drivers/scsi/lpfc/Makefile

@@ -28,6 +28,7 @@ endif
 
 obj-$(CONFIG_SCSI_LPFC) := lpfc.o
 
-lpfc-objs := lpfc_mem.o lpfc_sli.o lpfc_ct.o lpfc_els.o lpfc_hbadisc.o	\
-	lpfc_init.o lpfc_mbox.o lpfc_nportdisc.o lpfc_scsi.o lpfc_attr.o \
-	lpfc_vport.o lpfc_debugfs.o lpfc_bsg.o
+lpfc-objs := lpfc_mem.o lpfc_sli.o lpfc_ct.o lpfc_els.o \
+	lpfc_hbadisc.o	lpfc_init.o lpfc_mbox.o lpfc_nportdisc.o   \
+	lpfc_scsi.o lpfc_attr.o lpfc_vport.o lpfc_debugfs.o lpfc_bsg.o \
+	lpfc_nvme.o

drivers/scsi/lpfc/lpfc.h

@@ -123,6 +123,11 @@ struct perf_prof {
 	uint16_t wqidx[40];
 };
 
+/*
+ * Provide for FC4 TYPE x28 - NVME.  The
+ * bit mask for FCP and NVME is 0x8 identically
+ * because they are 32 bit positions distance.
+ */
 #define LPFC_FC4_TYPE_BITMASK	0x00000100
 
 /* Provide DMA memory definitions the driver uses per port instance. */

drivers/scsi/lpfc/lpfc_crtn.h

@@ -518,4 +518,14 @@ int lpfc_sli4_dump_page_a0(struct lpfc_hba *phba, struct lpfcMboxq *mbox);
 void lpfc_mbx_cmpl_rdp_page_a0(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb);
 
 /* NVME interfaces. */
+void lpfc_nvme_unregister_port(struct lpfc_vport *vport,
+			struct lpfc_nodelist *ndlp);
+int lpfc_nvme_register_port(struct lpfc_vport *vport,
+			struct lpfc_nodelist *ndlp);
+int lpfc_nvme_create_localport(struct lpfc_vport *vport);
+void lpfc_nvme_destroy_localport(struct lpfc_vport *vport);
+void lpfc_nvme_update_localport(struct lpfc_vport *vport);
 void lpfc_nvme_mod_param_dep(struct lpfc_hba *phba);
+void lpfc_nvme_abort_fcreq_cmpl(struct lpfc_hba *phba,
+				struct lpfc_iocbq *cmdiocb,
+				struct lpfc_wcqe_complete *abts_cmpl);

drivers/scsi/lpfc/lpfc_ct.c

@@ -1412,7 +1412,7 @@ lpfc_ns_cmd(struct lpfc_vport *vport, int cmdcode,
 		if (((phba->cfg_enable_fc4_type == LPFC_ENABLE_BOTH) ||
 		     (phba->cfg_enable_fc4_type == LPFC_ENABLE_NVME)) &&
 		    (context == FC_TYPE_NVME)) {
-			/* todo: init: revise localport nvme attributes */
+			lpfc_nvme_update_localport(vport);
 			CtReq->un.rff.type_code = context;
 
 		} else if (((phba->cfg_enable_fc4_type == LPFC_ENABLE_BOTH) ||

drivers/scsi/lpfc/lpfc_els.c

@@ -2618,7 +2618,9 @@ lpfc_cmpl_els_logo(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 		!(vport->fc_flag & FC_PT2PT_PLOGI)) {
 		phba->pport->fc_myDID = 0;
 
-		/* todo: init: revise localport nvme attributes */
+		if ((phba->cfg_enable_fc4_type == LPFC_ENABLE_BOTH) ||
+		    (phba->cfg_enable_fc4_type == LPFC_ENABLE_NVME))
+			lpfc_nvme_update_localport(phba->pport);
 
 		mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
 		if (mbox) {

drivers/scsi/lpfc/lpfc_hbadisc.c

@@ -909,7 +909,9 @@ lpfc_linkdown(struct lpfc_hba *phba)
 
 			vports[i]->fc_myDID = 0;
 
-			/* todo: init: revise localport nvme attributes */
+			if ((phba->cfg_enable_fc4_type == LPFC_ENABLE_BOTH) ||
+			    (phba->cfg_enable_fc4_type == LPFC_ENABLE_NVME))
+				lpfc_nvme_update_localport(vports[i]);
 		}
 	}
 	lpfc_destroy_vport_work_array(phba, vports);
@@ -3580,7 +3582,9 @@ lpfc_mbx_cmpl_reg_vpi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 		spin_unlock_irq(shost->host_lock);
 		vport->fc_myDID = 0;
 
-		/* todo: init: revise localport nvme attributes */
+		if ((phba->cfg_enable_fc4_type == LPFC_ENABLE_BOTH) ||
+		    (phba->cfg_enable_fc4_type == LPFC_ENABLE_NVME))
+			lpfc_nvme_update_localport(vport);
 		goto out;
 	}
 
@@ -3950,7 +3954,8 @@ lpfc_mbx_cmpl_ns_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 
 		if ((phba->cfg_enable_fc4_type == LPFC_ENABLE_BOTH) ||
 		    (phba->cfg_enable_fc4_type == LPFC_ENABLE_NVME))
-			lpfc_ns_cmd(vport, SLI_CTNS_RFF_ID, 0, FC_TYPE_NVME);
+			lpfc_ns_cmd(vport, SLI_CTNS_RFF_ID, 0,
+				    FC_TYPE_NVME);
 
 		/* Issue SCR just before NameServer GID_FT Query */
 		lpfc_issue_els_scr(vport, SCR_DID, 0);
@@ -4144,7 +4149,7 @@ lpfc_nlp_state_cleanup(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 		    ((ndlp->nlp_fc4_type & NLP_FC4_NVME) ||
 		    (ndlp->nlp_DID == Fabric_DID))) {
 			vport->phba->nport_event_cnt++;
-			/* todo: init: unregister rport from nvme */
+			lpfc_nvme_unregister_port(vport, ndlp);
 		}
 	}
 
@@ -4169,7 +4174,7 @@ lpfc_nlp_state_cleanup(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 				 * the register.
 				 */
 				vport->phba->nport_event_cnt++;
-				/* todo: init: register rport with nvme */
+				lpfc_nvme_register_port(vport, ndlp);
 			}
 		}
 	}

drivers/scsi/lpfc/lpfc_init.c

@@ -3128,7 +3128,6 @@ static void
 lpfc_scsi_free(struct lpfc_hba *phba)
 {
 	struct lpfc_scsi_buf *sb, *sb_next;
-	struct lpfc_iocbq *io, *io_next;
 
 	if (!(phba->cfg_enable_fc4_type & LPFC_ENABLE_FCP))
 		return;
@@ -3158,14 +3157,6 @@ lpfc_scsi_free(struct lpfc_hba *phba)
 		phba->total_scsi_bufs--;
 	}
 	spin_unlock(&phba->scsi_buf_list_get_lock);
-
-	/* Release all the lpfc_iocbq entries maintained by this host. */
-	list_for_each_entry_safe(io, io_next, &phba->lpfc_iocb_list, list) {
-		list_del(&io->list);
-		kfree(io);
-		phba->total_iocbq_bufs--;
-	}
-
 	spin_unlock_irq(&phba->hbalock);
 }
 /**
@@ -3180,7 +3171,6 @@ static void
 lpfc_nvme_free(struct lpfc_hba *phba)
 {
 	struct lpfc_nvme_buf *lpfc_ncmd, *lpfc_ncmd_next;
-	struct lpfc_iocbq *io, *io_next;
 
 	if (!(phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME))
 		return;
@@ -3209,14 +3199,6 @@ lpfc_nvme_free(struct lpfc_hba *phba)
 		phba->total_nvme_bufs--;
 	}
 	spin_unlock(&phba->nvme_buf_list_get_lock);
-
-	/* Release all the lpfc_iocbq entries maintained by this host. */
-	list_for_each_entry_safe(io, io_next, &phba->lpfc_iocb_list, list) {
-		list_del(&io->list);
-		kfree(io);
-		phba->total_iocbq_bufs--;
-	}
-
 	spin_unlock_irq(&phba->hbalock);
 }
 /**
@@ -10685,7 +10667,23 @@ lpfc_pci_probe_one_s4(struct pci_dev *pdev, const struct pci_device_id *pid)
 	/* Perform post initialization setup */
 	lpfc_post_init_setup(phba);
 
-	/* todo: init: register port with nvme */
+	/* NVME support in FW earlier in the driver load corrects the
+	 * FC4 type making a check for nvme_support unnecessary.
+	 */
+	if ((phba->nvmet_support == 0) &&
+	    (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME)) {
+		/* Create NVME binding with nvme_fc_transport. This
+		 * ensures the vport is initialized.
+		 */
+		error = lpfc_nvme_create_localport(vport);
+		if (error) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"6004 NVME registration failed, "
+					"error x%x\n",
+					error);
+			goto out_disable_intr;
+		}
+	}
 
 	/* check for firmware upgrade or downgrade */
 	if (phba->cfg_request_firmware_upgrade)
@@ -10761,8 +10759,8 @@ lpfc_pci_remove_one_s4(struct pci_dev *pdev)
 	/* Perform ndlp cleanup on the physical port.  The nvme localport
 	 * is destroyed after to ensure all rports are io-disabled.
 	 */
+	lpfc_nvme_destroy_localport(vport);
 	lpfc_cleanup(vport);
-	/* todo: init: unregister port with nvme */
 
 	/*
 	 * Bring down the SLI Layer. This step disables all interrupts,
@@ -10781,6 +10779,7 @@ lpfc_pci_remove_one_s4(struct pci_dev *pdev)
 	 */
 	lpfc_scsi_free(phba);
 	lpfc_nvme_free(phba);
+	lpfc_free_iocb_list(phba);
 
 	lpfc_sli4_driver_resource_unset(phba);
 

drivers/scsi/lpfc/lpfc_nportdisc.c

@@ -1655,9 +1655,7 @@ lpfc_cmpl_reglogin_reglogin_issue(struct lpfc_vport *vport,
 			     (phba->cfg_enable_fc4_type == LPFC_ENABLE_NVME)) {
 				ndlp->nlp_fc4_type |= NLP_FC4_NVME;
 				/* We need to update the localport also */
-				/* todo: init: revise localport nvme
-				 * attributes
-				 */
+				lpfc_nvme_update_localport(vport);
 			}
 
 		} else if (ndlp->nlp_fc4_type == 0) {

drivers/scsi/lpfc/lpfc_nvme.h

@@ -29,6 +29,12 @@
 
 #define LPFC_NVME_ERSP_LEN		0x20
 
+struct lpfc_nvme_qhandle {
+	uint32_t index;		/* WQ index to use */
+	uint32_t qidx;		/* queue index passed to create */
+	uint32_t cpu_id;	/* current cpu id at time of create */
+};
+
 /* Declare nvme-based local and remote port definitions. */
 struct lpfc_nvme_lport {
 	struct lpfc_vport *vport;

drivers/scsi/lpfc/lpfc_sli.c

@@ -6795,6 +6795,22 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba)
 		}
 	}
 
+	if ((phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) &&
+	    (phba->nvmet_support == 0)) {
+
+		/* register the allocated nvme sgl pool to the port */
+		rc = lpfc_repost_nvme_sgl_list(phba);
+		if (unlikely(rc)) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+					"6116 Error %d during nvme sgl post "
+					"operation\n", rc);
+			/* Some NVME buffers were moved to abort nvme list */
+			/* A pci function reset will repost them */
+			rc = -ENODEV;
+			goto out_destroy_queue;
+		}
+	}
+
 	/* Post the rpi header region to the device. */
 	rc = lpfc_sli4_post_all_rpi_hdrs(phba);
 	if (unlikely(rc)) {
@@ -10492,10 +10508,7 @@ lpfc_sli4_abort_nvme_io(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 	/* ABTS WQE must go to the same WQ as the WQE to be aborted */
 	abtsiocbp->iocb_flag |= LPFC_IO_NVME;
 	abtsiocbp->vport = vport;
-	/* todo: assign wqe_cmpl to lpfc_nvme_abort_fcreq_cmpl
-	 * subsequent patch will add routine. For now, just skip assignment
-	 * as won't ever be called.
-	 */
+	abtsiocbp->wqe_cmpl = lpfc_nvme_abort_fcreq_cmpl;
 	retval = lpfc_sli4_issue_wqe(phba, LPFC_FCP_RING, abtsiocbp);
 	if (retval == IOCB_ERROR) {
 		lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME,

drivers/scsi/lpfc/lpfc_sli4.h

@@ -753,6 +753,7 @@ int lpfc_sli4_queue_setup(struct lpfc_hba *);
 void lpfc_sli4_queue_unset(struct lpfc_hba *);
 int lpfc_sli4_post_sgl(struct lpfc_hba *, dma_addr_t, dma_addr_t, uint16_t);
 int lpfc_sli4_repost_scsi_sgl_list(struct lpfc_hba *);
+int lpfc_repost_nvme_sgl_list(struct lpfc_hba *phba);
 uint16_t lpfc_sli4_next_xritag(struct lpfc_hba *);
 void lpfc_sli4_free_xri(struct lpfc_hba *, int);
 int lpfc_sli4_post_async_mbox(struct lpfc_hba *);

drivers/scsi/lpfc/lpfc_vport.c

@@ -403,7 +403,21 @@ lpfc_vport_create(struct fc_vport *fc_vport, bool disable)
 		vport->fdmi_port_mask = phba->pport->fdmi_port_mask;
 	}
 
-	/* todo: init: register port with nvme */
+	if ((phba->nvmet_support == 0) &&
+	    ((phba->cfg_enable_fc4_type == LPFC_ENABLE_BOTH) ||
+	     (phba->cfg_enable_fc4_type == LPFC_ENABLE_NVME))) {
+		/* Create NVME binding with nvme_fc_transport. This
+		 * ensures the vport is initialized.
+		 */
+		rc = lpfc_nvme_create_localport(vport);
+		if (rc) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"6003 %s status x%x\n",
+					"NVME registration failed, ",
+					rc);
+			goto error_out;
+		}
+	}
 
 	/*
 	 * In SLI4, the vpi must be activated before it can be used