- 18 11月, 2012 26 次提交
-
-
由 Yinghai Lu 提交于
Page table area are pre-mapped now after x86, mm: setup page table in top-down x86, mm: Remove early_memremap workaround for page table accessing on 64bit mapping_pagetable_reserve is not used anymore, so remove it. Also remove operation in mask_rw_pte(), as modified allow_low_page always return pages that are already mapped, moreover xen_alloc_pte_init, xen_alloc_pmd_init, etc, will mark the page RO before hooking it into the pagetable automatically. -v2: add changelog about mask_rw_pte() from Stefano. Signed-off-by: NYinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1353123563-3103-27-git-send-email-yinghai@kernel.org Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 Yinghai Lu 提交于
Also change it to static. Signed-off-by: NYinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1353123563-3103-26-git-send-email-yinghai@kernel.orgSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 Yinghai Lu 提交于
They are almost same except 64 bit need to handle after_bootmem case. Add mm_internal.h to make that alloc_low_page() only to be accessible from arch/x86/mm/init*.c Signed-off-by: NYinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1353123563-3103-25-git-send-email-yinghai@kernel.orgSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 Yinghai Lu 提交于
Now all page table buf are pre-mapped, and could use virtual address directly. So don't need to remember physical address anymore. Remove that phys pointer in alloc_low_page(), and that will allow us to merge alloc_low_page between 64bit and 32bit. Signed-off-by: NYinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1353123563-3103-24-git-send-email-yinghai@kernel.orgAcked-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 Yinghai Lu 提交于
We try to put page table high to make room for kdump, and at that time those ranges are not mapped yet, and have to use ioremap to access it. Now after patch that pre-map page table top down. x86, mm: setup page table in top-down We do not need that workaround anymore. Just use __va to return directly mapping address. Signed-off-by: NYinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1353123563-3103-23-git-send-email-yinghai@kernel.orgAcked-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 Yinghai Lu 提交于
Get pgt_buf early from BRK, and use it to map PMD_SIZE from top at first. Then use mapped pages to map more ranges below, and keep looping until all pages get mapped. alloc_low_page will use page from BRK at first, after that buffer is used up, will use memblock to find and reserve pages for page table usage. Introduce min_pfn_mapped to make sure find new pages from mapped ranges, that will be updated when lower pages get mapped. Also add step_size to make sure that don't try to map too big range with limited mapped pages initially, and increase the step_size when we have more mapped pages on hand. We don't need to call pagetable_reserve anymore, reserve work is done in alloc_low_page() directly. At last we can get rid of calculation and find early pgt related code. -v2: update to after fix_xen change, also use MACRO for initial pgt_buf size and add comments with it. -v3: skip big reserved range in memblock.reserved near end. -v4: don't need fix_xen change now. -v5: add changelog about moving about reserving pagetable to alloc_low_page. Suggested-by: N"H. Peter Anvin" <hpa@zytor.com> Signed-off-by: NYinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1353123563-3103-22-git-send-email-yinghai@kernel.orgSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 Yinghai Lu 提交于
Will replace that with top-down page table initialization. New API need to take range: init_range_memory_mapping() Signed-off-by: NYinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1353123563-3103-21-git-send-email-yinghai@kernel.orgSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 Yinghai Lu 提交于
After we add code use buffer in BRK to pre-map buf for page table in following patch: x86, mm: setup page table in top-down it should be safe to remove early_memmap for page table accessing. Instead we get panic with that. It turns out that we clear the initial page table wrongly for next range that is separated by holes. And it only happens when we are trying to map ram range one by one. We need to check if the range is ram before clearing page table. We change the loop structure to remove the extra little loop and use one loop only, and in that loop will caculate next at first, and check if [addr,next) is covered by E820_RAM. -v2: E820_RESERVED_KERN is treated as E820_RAM. EFI one change some E820_RAM to that, so next kernel by kexec will know that range is used already. Signed-off-by: NYinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1353123563-3103-20-git-send-email-yinghai@kernel.orgSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 Yinghai Lu 提交于
We could map small range in the middle of big range at first, so should use big page size at first to avoid using small page size to break down page table. Only can set big page bit when that range has ram area around it. -v2: fix 32bit boundary checking. We can not count ram above max_low_pfn for 32 bit. Signed-off-by: NYinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1353123563-3103-19-git-send-email-yinghai@kernel.orgSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 Yinghai Lu 提交于
We are going to use buffer in BRK to map small range just under memory top, and use those new mapped ram to map ram range under it. The ram range that will be mapped at first could be only page aligned, but ranges around it are ram too, we could use bigger page to map it to avoid small page size. We will adjust page_size_mask in following patch: x86, mm: Use big page size for small memory range to use big page size for small ram range. Before that patch, this patch will make sure start address to be aligned down according to bigger page size, otherwise entry in page page will not have correct value. Signed-off-by: NYinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1353123563-3103-18-git-send-email-yinghai@kernel.orgSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 Yinghai Lu 提交于
instead of under 4g. For 64bit, we can use any mapped mem instead of low mem. Signed-off-by: NYinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1353123563-3103-17-git-send-email-yinghai@kernel.orgSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 Jacob Shin 提交于
Currently direct mappings are created for [ 0 to max_low_pfn<<PAGE_SHIFT ) and [ 4GB to max_pfn<<PAGE_SHIFT ), which may include regions that are not backed by actual DRAM. This is fine for holes under 4GB which are covered by fixed and variable range MTRRs to be UC. However, we run into trouble on higher memory addresses which cannot be covered by MTRRs. Our system with 1TB of RAM has an e820 that looks like this: BIOS-e820: [mem 0x0000000000000000-0x00000000000983ff] usable BIOS-e820: [mem 0x0000000000098400-0x000000000009ffff] reserved BIOS-e820: [mem 0x00000000000d0000-0x00000000000fffff] reserved BIOS-e820: [mem 0x0000000000100000-0x00000000c7ebffff] usable BIOS-e820: [mem 0x00000000c7ec0000-0x00000000c7ed7fff] ACPI data BIOS-e820: [mem 0x00000000c7ed8000-0x00000000c7ed9fff] ACPI NVS BIOS-e820: [mem 0x00000000c7eda000-0x00000000c7ffffff] reserved BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved BIOS-e820: [mem 0x0000000100000000-0x000000e037ffffff] usable BIOS-e820: [mem 0x000000e038000000-0x000000fcffffffff] reserved BIOS-e820: [mem 0x0000010000000000-0x0000011ffeffffff] usable and so direct mappings are created for huge memory hole between 0x000000e038000000 to 0x0000010000000000. Even though the kernel never generates memory accesses in that region, since the page tables mark them incorrectly as being WB, our (AMD) processor ends up causing a MCE while doing some memory bookkeeping/optimizations around that area. This patch iterates through e820 and only direct maps ranges that are marked as E820_RAM, and keeps track of those pfn ranges. Depending on the alignment of E820 ranges, this may possibly result in using smaller size (i.e. 4K instead of 2M or 1G) page tables. -v2: move changes from setup.c to mm/init.c, also use for_each_mem_pfn_range instead. - Yinghai Lu -v3: add calculate_all_table_space_size() to get correct needed page table size. - Yinghai Lu -v4: fix add_pfn_range_mapped() to get correct max_low_pfn_mapped when mem map does have hole under 4g that is found by Konard on xen domU with 8g ram. - Yinghai Signed-off-by: NJacob Shin <jacob.shin@amd.com> Link: http://lkml.kernel.org/r/1353123563-3103-16-git-send-email-yinghai@kernel.orgSigned-off-by: NYinghai Lu <yinghai@kernel.org> Reviewed-by: NPekka Enberg <penberg@kernel.org> Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 Yinghai Lu 提交于
We are going to map ram only, so under max_low_pfn_mapped, between 4g and max_pfn_mapped does not mean mapped at all. Use pfn_range_is_mapped() to find out if range is mapped for initrd. That could happen bootloader put initrd in range but user could use memmap to carve some of range out. Also during copying need to use early_memmap to map original initrd for accessing. Signed-off-by: NYinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1353123563-3103-15-git-send-email-yinghai@kernel.orgSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 Yinghai Lu 提交于
We are going to map ram only, so under max_low_pfn_mapped, between 4g and max_pfn_mapped does not mean mapped at all. Use pfn_range_is_mapped() directly. Signed-off-by: NYinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1353123563-3103-14-git-send-email-yinghai@kernel.orgSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 Yinghai Lu 提交于
We are going to map ram only, so under max_low_pfn_mapped, between 4g and max_pfn_mapped does not mean mapped at all. Use pfn_range_is_mapped() directly. Signed-off-by: NYinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1353123563-3103-13-git-send-email-yinghai@kernel.orgSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 Jacob Shin 提交于
Update code that previously assumed pfns [ 0 - max_low_pfn_mapped ) and [ 4GB - max_pfn_mapped ) were always direct mapped, to now look up pfn_mapped ranges instead. -v2: change applying sequence to keep git bisecting working. so add dummy pfn_range_is_mapped(). - Yinghai Lu Signed-off-by: NJacob Shin <jacob.shin@amd.com> Link: http://lkml.kernel.org/r/1353123563-3103-12-git-send-email-yinghai@kernel.orgSigned-off-by: NYinghai Lu <yinghai@kernel.org> Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 Jacob Shin 提交于
There could be cases where user supplied memmap=exactmap memory mappings do not mark the region where the kernel .text .data and .bss reside as E820_RAM, as reported here: https://lkml.org/lkml/2012/8/14/86 Handle it by complaining, and adding the range back into the e820. Signed-off-by: NJacob Shin <jacob.shin@amd.com> Link: http://lkml.kernel.org/r/1353123563-3103-11-git-send-email-yinghai@kernel.orgSigned-off-by: NYinghai Lu <yinghai@kernel.org> Reviewed-by: NPekka Enberg <penberg@kernel.org> Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 Yinghai Lu 提交于
memblock_x86_fill() could double memory array. If we set memblock.current_limit to 512M, so memory array could be around 512M. So kdump will not get big range (like 512M) under 1024M. Try to put it down under 1M, it would use about 4k or so, and that is limited. Signed-off-by: NYinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1353123563-3103-10-git-send-email-yinghai@kernel.orgSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 Yinghai Lu 提交于
It should take physical address range that will need to be mapped. find_early_table_space should take range that pgt buff should be in. Separating page table size calculating and finding early page table to reduce confusing. Signed-off-by: NYinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1353123563-3103-9-git-send-email-yinghai@kernel.orgReviewed-by: NPekka Enberg <penberg@kernel.org> Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 Yinghai Lu 提交于
We should not do that in every calling of init_memory_mapping. At the same time need to move down early_memtest, and could remove after_bootmem checking. -v2: fix one early_memtest with 32bit by passing max_pfn_mapped instead. Signed-off-by: NYinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1353123563-3103-8-git-send-email-yinghai@kernel.orgSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 Yinghai Lu 提交于
call split_mem_range inside the function. Signed-off-by: NYinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1353123563-3103-7-git-send-email-yinghai@kernel.orgSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 Yinghai Lu 提交于
After | commit 8548c84d | Author: Takashi Iwai <tiwai@suse.de> | Date: Sun Oct 23 23:19:12 2011 +0200 | | x86: Fix S4 regression | | Commit 4b239f45 ("x86-64, mm: Put early page table high") causes a S4 | regression since 2.6.39, namely the machine reboots occasionally at S4 | resume. It doesn't happen always, overall rate is about 1/20. But, | like other bugs, once when this happens, it continues to happen. | | This patch fixes the problem by essentially reverting the memory | assignment in the older way. Have some page table around 512M again, that will prevent kdump to find 512M under 768M. We need revert that reverting, so we could put page table high again for 64bit. Takashi agreed that S4 regression could be something else. https://lkml.org/lkml/2012/6/15/182Signed-off-by: NYinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1353123563-3103-6-git-send-email-yinghai@kernel.orgSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 Yinghai Lu 提交于
Now init_memory_mapping is called two times, later will be called for every ram ranges. Could put all related init_mem calling together and out of setup.c. Actually, it reverts commit 1bbbbe77 x86: Exclude E820_RESERVED regions and memory holes above 4 GB from direct mapping. will address that later with complete solution include handling hole under 4g. Signed-off-by: NYinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1353123563-3103-5-git-send-email-yinghai@kernel.orgReviewed-by: NPekka Enberg <penberg@kernel.org> Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 Yinghai Lu 提交于
It will need to call split_mem_range(). Move it down after that to avoid extra declaration. Signed-off-by: NYinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1353123563-3103-4-git-send-email-yinghai@kernel.orgSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 Yinghai Lu 提交于
So make init_memory_mapping smaller and readable. -v2: use 0 instead of nr_range as input parameter found by Yasuaki Ishimatsu. Suggested-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NYinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1353123563-3103-3-git-send-email-yinghai@kernel.orgReviewed-by: NPekka Enberg <penberg@kernel.org> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 Yinghai Lu 提交于
Now we pass around use_gbpages and use_pse for calculating page table size, Later we will need to call init_memory_mapping for every ram range one by one, that mean those calculation will be done several times. Those information are the same for all ram range and could be stored in page_size_mask and could be probed it one time only. Move that probing code out of init_memory_mapping into separated function probe_page_size_mask(), and call it before all init_memory_mapping. Suggested-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NYinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1353123563-3103-2-git-send-email-yinghai@kernel.orgReviewed-by: NPekka Enberg <penberg@kernel.org> Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
- 17 11月, 2012 14 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull KVM fix from Marcelo Tosatti: "A correction for oops on module init with older Intel hosts." * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: Fix invalid secondary exec controls in vmx_cpuid_update()
-
由 Linus Torvalds 提交于
Merge misc fixes from Andrew Morton. * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (12 patches) revert "mm: fix-up zone present pages" tmpfs: change final i_blocks BUG to WARNING tmpfs: fix shmem_getpage_gfp() VM_BUG_ON mm: highmem: don't treat PKMAP_ADDR(LAST_PKMAP) as a highmem address mm: revert "mm: vmscan: scale number of pages reclaimed by reclaim/compaction based on failures" rapidio: fix kernel-doc warnings swapfile: fix name leak in swapoff memcg: fix hotplugged memory zone oops mips, arc: fix build failure memcg: oom: fix totalpages calculation for memory.swappiness==0 mm: fix build warning for uninitialized value mm: add anon_vma_lock to validate_mm()
-
由 Andrew Morton 提交于
Revert commit 7f1290f2 ("mm: fix-up zone present pages") That patch tried to fix a issue when calculating zone->present_pages, but it caused a regression on 32bit systems with HIGHMEM. With that change, reset_zone_present_pages() resets all zone->present_pages to zero, and fixup_zone_present_pages() is called to recalculate zone->present_pages when the boot allocator frees core memory pages into buddy allocator. Because highmem pages are not freed by bootmem allocator, all highmem zones' present_pages becomes zero. Various options for improving the situation are being discussed but for now, let's return to the 3.6 code. Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Petr Tesarik <ptesarik@suse.cz> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Acked-by: NDavid Rientjes <rientjes@google.com> Tested-by: NChris Clayton <chris2553@googlemail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Hugh Dickins 提交于
Under a particular load on one machine, I have hit shmem_evict_inode()'s BUG_ON(inode->i_blocks), enough times to narrow it down to a particular race between swapout and eviction. It comes from the "if (freed > 0)" asymmetry in shmem_recalc_inode(), and the lack of coherent locking between mapping's nrpages and shmem's swapped count. There's a window in shmem_writepage(), between lowering nrpages in shmem_delete_from_page_cache() and then raising swapped count, when the freed count appears to be +1 when it should be 0, and then the asymmetry stops it from being corrected with -1 before hitting the BUG. One answer is coherent locking: using tree_lock throughout, without info->lock; reasonable, but the raw_spin_lock in percpu_counter_add() on used_blocks makes that messier than expected. Another answer may be a further effort to eliminate the weird shmem_recalc_inode() altogether, but previous attempts at that failed. So far undecided, but for now change the BUG_ON to WARN_ON: in usual circumstances it remains a useful consistency check. Signed-off-by: NHugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Hugh Dickins 提交于
Fuzzing with trinity hit the "impossible" VM_BUG_ON(error) (which Fedora has converted to WARNING) in shmem_getpage_gfp(): WARNING: at mm/shmem.c:1151 shmem_getpage_gfp+0xa5c/0xa70() Pid: 29795, comm: trinity-child4 Not tainted 3.7.0-rc2+ #49 Call Trace: warn_slowpath_common+0x7f/0xc0 warn_slowpath_null+0x1a/0x20 shmem_getpage_gfp+0xa5c/0xa70 shmem_fault+0x4f/0xa0 __do_fault+0x71/0x5c0 handle_pte_fault+0x97/0xae0 handle_mm_fault+0x289/0x350 __do_page_fault+0x18e/0x530 do_page_fault+0x2b/0x50 page_fault+0x28/0x30 tracesys+0xe1/0xe6 Thanks to Johannes for pointing to truncation: free_swap_and_cache() only does a trylock on the page, so the page lock we've held since before confirming swap is not enough to protect against truncation. What cleanup is needed in this case? Just delete_from_swap_cache(), which takes care of the memcg uncharge. Signed-off-by: NHugh Dickins <hughd@google.com> Reported-by: NDave Jones <davej@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Will Deacon 提交于
kmap_to_page returns the corresponding struct page for a virtual address of an arbitrary mapping. This works by checking whether the address falls in the pkmap region and using the pkmap page tables instead of the linear mapping if appropriate. Unfortunately, the bounds checking means that PKMAP_ADDR(LAST_PKMAP) is incorrectly treated as a highmem address and we can end up walking off the end of pkmap_page_table and subsequently passing junk to pte_page. This patch fixes the bound check to stay within the pkmap tables. Signed-off-by: NWill Deacon <will.deacon@arm.com> Cc: Mel Gorman <mgorman@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mel Gorman 提交于
Jiri Slaby reported the following: (It's an effective revert of "mm: vmscan: scale number of pages reclaimed by reclaim/compaction based on failures".) Given kswapd had hours of runtime in ps/top output yesterday in the morning and after the revert it's now 2 minutes in sum for the last 24h, I would say, it's gone. The intention of the patch in question was to compensate for the loss of lumpy reclaim. Part of the reason lumpy reclaim worked is because it aggressively reclaimed pages and this patch was meant to be a sane compromise. When compaction fails, it gets deferred and both compaction and reclaim/compaction is deferred avoid excessive reclaim. However, since commit c6543459 ("mm: remove __GFP_NO_KSWAPD"), kswapd is woken up each time and continues reclaiming which was not taken into account when the patch was developed. Attempts to address the problem ended up just changing the shape of the problem instead of fixing it. The release window gets closer and while a THP allocation failing is not a major problem, kswapd chewing up a lot of CPU is. This patch reverts commit 83fde0f2 ("mm: vmscan: scale number of pages reclaimed by reclaim/compaction based on failures") and will be revisited in the future. Signed-off-by: NMel Gorman <mgorman@suse.de> Cc: Zdenek Kabelac <zkabelac@redhat.com> Tested-by: NValdis Kletnieks <Valdis.Kletnieks@vt.edu> Cc: Jiri Slaby <jirislaby@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Johannes Hirte <johannes.hirte@fem.tu-ilmenau.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Randy Dunlap 提交于
Fix rapidio kernel-doc warnings: Warning(drivers/rapidio/rio.c:415): No description found for parameter 'local' Warning(drivers/rapidio/rio.c:415): Excess function parameter 'lstart' description in 'rio_map_inb_region' Warning(include/linux/rio.h:290): No description found for parameter 'switches' Warning(include/linux/rio.h:290): No description found for parameter 'destid_table' Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Cc: Matt Porter <mporter@kernel.crashing.org> Acked-by: NAlexandre Bounine <alexandre.bounine@idt.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Xiaotian Feng 提交于
There's a name leak introduced by commit 91a27b2a ("vfs: define struct filename and have getname() return it"). Add the missing putname. [akpm@linux-foundation.org: cleanup] Signed-off-by: NXiaotian Feng <dannyfeng@tencent.com> Reviewed-by: NJeff Layton <jlayton@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Hugh Dickins 提交于
When MEMCG is configured on (even when it's disabled by boot option), when adding or removing a page to/from its lru list, the zone pointer used for stats updates is nowadays taken from the struct lruvec. (On many configurations, calculating zone from page is slower.) But we have no code to update all the lruvecs (per zone, per memcg) when a memory node is hotadded. Here's an extract from the oops which results when running numactl to bind a program to a newly onlined node: BUG: unable to handle kernel NULL pointer dereference at 0000000000000f60 IP: __mod_zone_page_state+0x9/0x60 Pid: 1219, comm: numactl Not tainted 3.6.0-rc5+ #180 Bochs Bochs Process numactl (pid: 1219, threadinfo ffff880039abc000, task ffff8800383c4ce0) Call Trace: __pagevec_lru_add_fn+0xdf/0x140 pagevec_lru_move_fn+0xb1/0x100 __pagevec_lru_add+0x1c/0x30 lru_add_drain_cpu+0xa3/0x130 lru_add_drain+0x2f/0x40 ... The natural solution might be to use a memcg callback whenever memory is hotadded; but that solution has not been scoped out, and it happens that we do have an easy location at which to update lruvec->zone. The lruvec pointer is discovered either by mem_cgroup_zone_lruvec() or by mem_cgroup_page_lruvec(), and both of those do know the right zone. So check and set lruvec->zone in those; and remove the inadequate attempt to set lruvec->zone from lruvec_init(), which is called before NODE_DATA(node) has been allocated in such cases. Ah, there was one exceptionr. For no particularly good reason, mem_cgroup_force_empty_list() has its own code for deciding lruvec. Change it to use the standard mem_cgroup_zone_lruvec() and mem_cgroup_get_lru_size() too. In fact it was already safe against such an oops (the lru lists in danger could only be empty), but we're better proofed against future changes this way. I've marked this for stable (3.6) since we introduced the problem in 3.5 (now closed to stable); but I have no idea if this is the only fix needed to get memory hotadd working with memcg in 3.6, and received no answer when I enquired twice before. Reported-by: NTang Chen <tangchen@cn.fujitsu.com> Signed-off-by: NHugh Dickins <hughd@google.com> Acked-by: NJohannes Weiner <hannes@cmpxchg.org> Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Rientjes 提交于
Using a cross-compiler to fix another issue, the following build error occurred for mips defconfig: arch/mips/fw/arc/misc.c: In function 'ArcHalt': arch/mips/fw/arc/misc.c:25:2: error: implicit declaration of function 'local_irq_disable' Fix it up by including irqflags.h. Signed-off-by: NDavid Rientjes <rientjes@google.com> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michal Hocko 提交于
oom_badness() takes a totalpages argument which says how many pages are available and it uses it as a base for the score calculation. The value is calculated by mem_cgroup_get_limit which considers both limit and total_swap_pages (resp. memsw portion of it). This is usually correct but since fe35004f ("mm: avoid swapping out with swappiness==0") we do not swap when swappiness is 0 which means that we cannot really use up all the totalpages pages. This in turn confuses oom score calculation if the memcg limit is much smaller than the available swap because the used memory (capped by the limit) is negligible comparing to totalpages so the resulting score is too small if adj!=0 (typically task with CAP_SYS_ADMIN or non zero oom_score_adj). A wrong process might be selected as result. The problem can be worked around by checking mem_cgroup_swappiness==0 and not considering swap at all in such a case. Signed-off-by: NMichal Hocko <mhocko@suse.cz> Acked-by: NDavid Rientjes <rientjes@google.com> Acked-by: NJohannes Weiner <hannes@cmpxchg.org> Acked-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Rientjes 提交于
do_wp_page() sets mmun_called if mmun_start and mmun_end were initialized and, if so, may call mmu_notifier_invalidate_range_end() with these values. This doesn't prevent gcc from emitting a build warning though: mm/memory.c: In function `do_wp_page': mm/memory.c:2530: warning: `mmun_start' may be used uninitialized in this function mm/memory.c:2531: warning: `mmun_end' may be used uninitialized in this function It's much easier to initialize the variables to impossible values and do a simple comparison to determine if they were initialized to remove the bool entirely. Signed-off-by: NDavid Rientjes <rientjes@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-