Many CPUFreq drivers for SMP system (where all cores share same clock lines), do
similar stuff in their ->init() part.

This patch creates a generic routine in cpufreq core which can be used by these
so that we can remove some redundant code.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Most of the CPUFreq drivers do similar things in .exit() and .verify() routines
and .attr. So its better if we have generic routines for them which can be used
by cpufreq drivers then.

This patch introduces generic .attr, .exit() and .verify() cpufreq drivers.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Most of the users of cpufreq_verify_within_limits() calls it for
limiting with min/max from policy->cpuinfo. We can make that code
simple by introducing another routine which will do this for them
automatically.

This patch adds another routine cpufreq_verify_within_cpu_limits()
and updates others to use it.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Acked-by: NDirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Use cpufreq_driver->flags to mark CPUFREQ_HAVE_GOVERNOR_PER_POLICY instead
of a separate field within cpufreq_driver. This will save some bytes of
memory.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Currently cpufreq_driver's flags are defined directly using 0x1, 0x2, 0x4, 0x8,
etc.. As the list grows it becomes less readable..

Use bitwise shift operator << to generate these numbers for respective
positions.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Almost every cpufreq driver is required to validate its frequency table with:
cpufreq_frequency_table_cpuinfo() and then expose it to cpufreq core with:
cpufreq_frequency_table_get_attr().

This patch creates another helper routine cpufreq_table_validate_and_show() that
will do both these steps in a single call and will return 0 for success, error
otherwise.

This also fixes potential bugs in cpufreq drivers where people have called
cpufreq_frequency_table_get_attr() before calling
cpufreq_frequency_table_cpuinfo(), as the later may fail.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Commit 7c30ed53 (cpufreq: make sure frequency transitions are
serialized) attempted to serialize frequency transitions by
adding checks to the CPUFREQ_PRECHANGE and CPUFREQ_POSTCHANGE
notifications.  However, it assumed that the notifications will
always originate from the driver's .target() callback, but they
also can be triggered by cpufreq_out_of_sync() and that leads to
warnings like this on some systems:

 WARNING: CPU: 0 PID: 14543 at drivers/cpufreq/cpufreq.c:317
 __cpufreq_notify_transition+0x238/0x260()
 In middle of another frequency transition

accompanied by a call trace similar to this one:

 [<ffffffff81720daa>] dump_stack+0x46/0x58
 [<ffffffff8106534c>] warn_slowpath_common+0x8c/0xc0
 [<ffffffff815b8560>] ? acpi_cpufreq_target+0x320/0x320
 [<ffffffff81065436>] warn_slowpath_fmt+0x46/0x50
 [<ffffffff815b1ec8>] __cpufreq_notify_transition+0x238/0x260
 [<ffffffff815b33be>] cpufreq_notify_transition+0x3e/0x70
 [<ffffffff815b345d>] cpufreq_out_of_sync+0x6d/0xb0
 [<ffffffff815b370c>] cpufreq_update_policy+0x10c/0x160
 [<ffffffff815b3760>] ? cpufreq_update_policy+0x160/0x160
 [<ffffffff81413813>] cpufreq_set_cur_state+0x8c/0xb5
 [<ffffffff814138df>] processor_set_cur_state+0xa3/0xcf
 [<ffffffff8158e13c>] thermal_cdev_update+0x9c/0xb0
 [<ffffffff8159046a>] step_wise_throttle+0x5a/0x90
 [<ffffffff8158e21f>] handle_thermal_trip+0x4f/0x140
 [<ffffffff8158e377>] thermal_zone_device_update+0x57/0xa0
 [<ffffffff81415b36>] acpi_thermal_check+0x2e/0x30
 [<ffffffff81415ca0>] acpi_thermal_notify+0x40/0xdc
 [<ffffffff813e7dbd>] acpi_device_notify+0x19/0x1b
 [<ffffffff813f8241>] acpi_ev_notify_dispatch+0x41/0x5c
 [<ffffffff813e3fbe>] acpi_os_execute_deferred+0x25/0x32
 [<ffffffff81081060>] process_one_work+0x170/0x4a0
 [<ffffffff81082121>] worker_thread+0x121/0x390
 [<ffffffff81082000>] ? manage_workers.isra.20+0x170/0x170
 [<ffffffff81088fe0>] kthread+0xc0/0xd0
 [<ffffffff81088f20>] ? flush_kthread_worker+0xb0/0xb0
 [<ffffffff8173582c>] ret_from_fork+0x7c/0xb0
 [<ffffffff81088f20>] ? flush_kthread_worker+0xb0/0xb0

For this reason, revert commit 7c30ed53 along with the fix 266c13d7
(cpufreq: Fix serialization of frequency transitions) on top of it
and we will revisit the serialization problem later.
Reported-by: NAlessandro Bono <alessandro.bono@gmail.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Commit "cpufreq: serialize calls to __cpufreq_governor()" had been a temporary
and partial solution to the race condition between writing to a cpufreq sysfs
file and taking a CPU offline. Now that we have a proper and complete solution
to that problem, remove the temporary fix.
Signed-off-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

We can't take a big lock around __cpufreq_governor() as this causes
recursive locking for some cases. But calls to this routine must be
serialized for every policy. Otherwise we can see some unpredictable
events.

For example, consider following scenario:

__cpufreq_remove_dev()
 __cpufreq_governor(policy, CPUFREQ_GOV_STOP);
   policy->governor->governor(policy, CPUFREQ_GOV_STOP);
    cpufreq_governor_dbs()
     case CPUFREQ_GOV_STOP:
      mutex_destroy(&cpu_cdbs->timer_mutex)
      cpu_cdbs->cur_policy = NULL;
  <PREEMPT>
store()
 __cpufreq_set_policy()
  __cpufreq_governor(policy, CPUFREQ_GOV_LIMITS);
    policy->governor->governor(policy, CPUFREQ_GOV_LIMITS);
     case CPUFREQ_GOV_LIMITS:
      mutex_lock(&cpu_cdbs->timer_mutex); <-- Warning (destroyed mutex)
       if (policy->max < cpu_cdbs->cur_policy->cur) <- cur_policy == NULL

And so store() will eventually result in a crash if cur_policy is
NULL at this point.

Introduce an additional variable which would guarantee serialization
here.
Reported-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

We don't need to set .owner = THIS_MODULE any more in cpufreq drivers
as this field isn't used any more by the cpufreq core.

This patch removes it and updates all dependent drivers accordingly.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Policies available in the cpufreq framework are now linked together.
They are accessible via cpufreq_policy_list defined in the cpufreq
core.

[rjw: Fix from Yinghai Lu folded in]
Signed-off-by: NLukasz Majewski <l.majewski@samsung.com>
Signed-off-by: NMyungjoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

They are called policy, cur_policy, new_policy, data, etc.  Just call
them policy wherever possible.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

They are pretty much mixed up.  Although generic headers are present,
definitions/declarations are present outside of them too ...

This patch just moves stuff up and down to make it look better and
consistent.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

This patch addresses the following issues in the header files in the
cpufreq core:
 - Include headers in ascending order, so that we don't add same
   many times by mistake.
 - <asm/> must be included after <linux/>, so that they override
   whatever they need to.
 - Remove unnecessary includes.
 - Don't include files already included by cpufreq.h or
   cpufreq_governor.h.

[rjw: Changelog]
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

The target frequency calculation method in the ondemand governor has
changed and it is now independent of the measured average frequency.
Consequently, the __cpufreq_driver_getavg() function and getavg
member of struct cpufreq_driver are not used any more, so drop them.

[rjw: Changelog]
Signed-off-by: NStratos Karafotis <stratosk@semaphore.gr>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Commit 7c30ed ("cpufreq: make sure frequency transitions are serialized")
interacts poorly with systems that have a single core freqency for all
cores.  On such systems we have a single policy for all cores with
several CPUs.  When we do a frequency transition the governor calls the
pre and post change notifiers which causes cpufreq_notify_transition()
per CPU.  Since the policy is the same for all of them all CPUs after
the first and the warnings added are generated by checking a per-policy
flag the warnings will be triggered for all cores after the first.

Fix this by allowing notifier to be called for n times. Where n is the number of
cpus in policy->cpus.
Reported-and-tested-by: NMark Brown <broonie@linaro.org>
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Commits fcf80582 (cpufreq: Simplify cpufreq_add_dev()) and aa77a527
(cpufreq: acpi-cpufreq: Don't set policy->related_cpus from .init())
changed the contents of the "related_cpus" sysfs attribute on systems
where acpi-cpufreq is used and user space can't get the list of CPUs
which are in the same hardware coordination CPU domain (provided by
the ACPI AML method _PSD) via "related_cpus" any more.

To make up for that loss add a new sysfs attribute "freqdomian_cpus"
for the acpi-cpufreq driver which exposes the list of CPUs in the
same domain regardless of whether it is coordinated by hardware or
software.

[rjw: Changelog, documentation]
References: https://bugzilla.kernel.org/show_bug.cgi?id=58761Reported-by: NJean-Philippe Halimi <jean-philippe.halimi@exascale-computing.eu>
Signed-off-by: NLan Tianyu <tianyu.lan@intel.com>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Whenever we are changing frequency of a cpu, we are calling PRECHANGE and
POSTCHANGE notifiers. They must be serialized. i.e. PRECHANGE or POSTCHANGE
shouldn't be called twice contiguously.

This can happen due to bugs in users of __cpufreq_driver_target() or actual
cpufreq drivers who are sending these notifiers.

This patch adds some protection against this. Now, we keep track of the last
transaction and see if something went wrong.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

There were a few noticeable formatting issues in core cpufreq code.
This cleans them up to make code look better.  The changes include:
 - Whitespace cleanup.
 - Rearrangements of code.
 - Multiline comments fixes.
 - Formatting changes to fit 80 columns.

Copyright information in cpufreq.c is also updated to include my name
for 2013.

[rjw: Changelog]
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Cpufreq governors' stop and start operations should be carried out
in sequence.  Otherwise, there will be unexpected behavior, like in
the example below.

Suppose there are 4 CPUs and policy->cpu=CPU0, CPU1/2/3 are linked
to CPU0.  The normal sequence is:

 1) Current governor is userspace.  An application tries to set the
    governor to ondemand.  It will call __cpufreq_set_policy() in
    which it will stop the userspace governor and then start the
    ondemand governor.

 2) Current governor is userspace.  The online of CPU3 runs on CPU0.
    It will call cpufreq_add_policy_cpu() in which it will first
    stop the userspace governor, and then start it again.

If the sequence of the above two cases interleaves, it becomes:

 1) Application stops userspace governor
 2)                                  Hotplug stops userspace governor

which is a problem, because the governor shouldn't be stopped twice
in a row.  What happens next is:

 3) Application starts ondemand governor
 4)                                  Hotplug starts a governor

In step 4, the hotplug is supposed to start the userspace governor,
but now the governor has been changed by the application to ondemand,
so the ondemand governor is started once again, which is incorrect.

The solution is to prevent policy governors from being stopped
multiple times in a row.  A governor should only be stopped once for
one policy.  After it has been stopped, no more governor stop
operations should be executed.

Also add a mutex to serialize governor operations.

[rjw: Changelog.  And you owe me a beverage of my choice.]
Signed-off-by: NXiaoguang Chen <chenxg@marvell.com>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

The "index" field of struct cpufreq_frequency_table was never an
index and isn't used at all by the cpufreq core.  It only is useful
for cpufreq drivers for their internal purposes.

Many people nowadays blindly set it in ascending order with the
assumption that the core will use it, which is a mistake.

Rename it to "driver_data" as that's what its purpose is. All of its
users are updated accordingly.

[rjw: Changelog]
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Acked-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

When we don't have any file in cpu/cpufreq directory we shouldn't
create it. Specially with the introduction of per-policy governor
instance patchset, even governors are moved to
cpu/cpu*/cpufreq/governor-name directory and so this directory is
just not required.

Lets have it only when required.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Governors other than ondemand and conservative can also use
get_cpu_idle_time() and they aren't required to compile
cpufreq_governor.c. So, move these independent routines to
cpufreq.c instead.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

get_governor_parent_kobj() can be used by any governor, generic
cpufreq governors or platform specific ones and so must be present in
cpufreq.c instead of cpufreq_governor.c.

This patch moves it to cpufreq.c. This also adds
EXPORT_SYMBOL_GPL(get_governor_parent_kobj) so that modules can use
this function too.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

policy->cpus contains all online cpus that have single shared clock line. And
their frequencies are always updated together.

Many SMP system's cpufreq drivers take care of this in individual drivers but
the best place for this code is in cpufreq core.

This patch modifies cpufreq_notify_transition() to notify frequency change for
all cpus in policy->cpus and hence updates all users of this API.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Acked-by: NStephen Warren <swarren@nvidia.com>
Tested-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Currently, there can't be multiple instances of single governor_type.
If we have a multi-package system, where we have multiple instances
of struct policy (per package), we can't have multiple instances of
same governor. i.e. We can't have multiple instances of ondemand
governor for multiple packages.

Governors directory in sysfs is created at /sys/devices/system/cpu/cpufreq/
governor-name/. Which again reflects that there can be only one
instance of a governor_type in the system.

This is a bottleneck for multicluster system, where we want different
packages to use same governor type, but with different tunables.

This patch uses the infrastructure provided by earlier patch and
implements init/exit routines for ondemand and conservative
governors.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Currently, there can't be multiple instances of single governor_type.
If we have a multi-package system, where we have multiple instances
of struct policy (per package), we can't have multiple instances of
same governor. i.e. We can't have multiple instances of ondemand
governor for multiple packages.

Governors directory in sysfs is created at /sys/devices/system/cpu/cpufreq/
governor-name/. Which again reflects that there can be only one
instance of a governor_type in the system.

This is a bottleneck for multicluster system, where we want different
packages to use same governor type, but with different tunables.

This patch is inclined towards providing this infrastructure. Because
we are required to allocate governor's resources dynamically now, we
must do it at policy creation and end. And so got
CPUFREQ_GOV_POLICY_INIT/EXIT.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

policy->shared_type field was added only for SoCs with ACPI support:

commit 3b2d9942
Author: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Date:   Wed Dec 14 15:05:00 2005 -0500

    P-state software coordination for ACPI core

    http://bugzilla.kernel.org/show_bug.cgi?id=5737

Many non-ACPI systems are filling this field by mistake, which makes its usage
confusing. Lets clean it.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Acked-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Currently, whenever governor->governor() is called for CPUFRREQ_GOV_START event
we reset few tunables of governor. Which isn't correct, as this routine is
called for every cpu hot-[un]plugging event. We should actually be resetting
these only when the governor module is removed and re-installed.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Implement a generic helper function policy_is_shared() to replace the
current dbs_sw_coordinated_cpus() at cpufreq level, so that it can be
used by code other than cpufreq governors.
Suggested-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NFabio Baltieri <fabio.baltieri@linaro.org>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Documentation related to cpus and related_cpus is confusing and not very clear.
Over that CPUFreq core has seen much changes recently. Lets update documentation
and comments for cpus and related_cpus.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Move function prototypes to a place where they logically fit better.
Signed-off-by: NBorislav Petkov <bp@suse.de>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Add a helper function to return cpufreq_driver->name.
Signed-off-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

__cpufreq_remove_dev() is called on multiple occasions: cpufreq_driver
unregister and cpu removals.

Current implementation of this routine is overly complex without much need. If
the cpu to be removed is the policy->cpu, we remove the policy first and add all
other cpus again from policy->cpus and then finally call __cpufreq_remove_dev()
again to remove the cpu to be deleted. Haahhhh..

There exist a simple solution to removal of a cpu:
- Simply use the old policy structure
- update its fields like: policy->cpu, etc.
- notify any users of cpufreq, which depend on changing policy->cpu

Hence this patch, which tries to implement the above theory. It is tested well
by myself on ARM big.LITTLE TC2 SoC, which has 5 cores (2 A15 and 3 A7). Both
A15's share same struct policy and all A7's share same policy structure.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Tested-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Initially ondemand governor was written and then using its code conservative
governor is written. It used a lot of code from ondemand governor, but copy of
code was created instead of using the same routines from both governors. Which
increased code redundancy, which is difficult to manage.

This patch is an attempt to move common part of both the governors to
cpufreq_governor.c file to come over above mentioned issues.

This shouldn't change anything from functionality point of view.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Multiple cpufreq governers have defined similar get_cpu_idle_time_***()
routines. These routines must be moved to some common place, so that all
governors can use them.

So moving them to cpufreq_governor.c, which seems to be a better place for
keeping these routines.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Arrays for governer and driver name are of size CPUFREQ_NAME_LEN or 16.
i.e. 15 bytes for name and 1 for trailing '\0'.

When cpufreq driver print these names (for sysfs), it includes '\n' or ' ' in
the fmt string and still passes length as CPUFREQ_NAME_LEN. If the driver or
governor names are using all 15 fields allocated to them, then the trailing '\n'
or ' ' will never be printed. And so commands like:

root@linaro-developer# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_driver

will print something like:

cpufreq_foodrvroot@linaro-developer#

Fix this by increasing print length by one character.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

useful for disabling cpufreq altogether. The cpu frequency
scaling drivers and cpu frequency governors will fail to register.
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: NDave Jones <davej@redhat.com>

The <linux/device.h> header includes a lot of stuff, and
it in turn gets a lot of use just for the basic "struct device"
which appears so often.

Clean up the users as follows:

1) For those headers only needing "struct device" as a pointer
in fcn args, replace the include with exactly that.

2) For headers not really using anything from device.h, simply
delete the include altogether.

3) For headers relying on getting device.h implicitly before
being included themselves, now explicitly include device.h

4) For files in which doing #1 or #2 uncovers an implicit
dependency on some other header, fix by explicitly adding
the required header(s).

Any C files that were implicitly relying on device.h to be
present have already been dealt with in advance.

Total removals from #1 and #2: 51.  Total additions coming
from #3: 9.  Total other implicit dependencies from #4: 7.

As of 3.3-rc1, there were 110, so a net removal of 42 gives
about a 38% reduction in device.h presence in include/*
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

useful for disabling cpufreq altogether. The cpu frequency
scaling drivers and cpu frequency governors will fail to register.
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: NDave Jones <davej@redhat.com>