Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
提交 50701588 编写于 作者: V Viresh Kumar 提交者： Rafael J. Wysocki
浏览文件
操作

cpufreq: rename index as driver_data in cpufreq_frequency_table 

The "index" field of struct cpufreq_frequency_table was never an
index and isn't used at all by the cpufreq core.  It only is useful
for cpufreq drivers for their internal purposes.

Many people nowadays blindly set it in ascending order with the
assumption that the core will use it, which is a mistake.

Rename it to "driver_data" as that's what its purpose is. All of its
users are updated accordingly.

[rjw: Changelog]
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Acked-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
上级 2361be23
隐藏空白更改
内联 并排
Showing with 223 addition and 227 deletion
Documentation/cpu-freq/cpu-drivers.txt
浏览文件 @ 50701588
......@@ -186,7 +186,7 @@ As most cpufreq processors only allow for being set to a few specific
frequencies, a "frequency table" with some functions might assist in
some work of the processor driver. Such a "frequency table" consists
of an array of struct cpufreq_frequency_table entries, with any value in
"index" you want to use, and the corresponding frequency in
"driver_data" you want to use, and the corresponding frequency in
"frequency". At the end of the table, you need to add a
cpufreq_frequency_table entry with frequency set to CPUFREQ_TABLE_END. And
if you want to skip one entry in the table, set the frequency to
......@@ -214,10 +214,4 @@ int cpufreq_frequency_table_target(struct cpufreq_policy *policy,
is the corresponding frequency table helper for the ->target
stage. Just pass the values to this function, and the unsigned int
index returns the number of the frequency table entry which contains
the frequency the CPU shall be set to. PLEASE NOTE: This is not the
"index" which is in this cpufreq_table_entry.index, but instead
cpufreq_table[index]. So, the new frequency is
cpufreq_table[index].frequency, and the value you stored into the
frequency table "index" field is
cpufreq_table[index].index.
the frequency the CPU shall be set to.
arch/arm/mach-davinci/da850.c
浏览文件 @ 50701588
......@@ -1004,7 +1004,7 @@ static const struct da850_opp da850_opp_96 = {
#define OPP(freq) \
{ \
.index = (unsigned int) &da850_opp_##freq, \
.driver_data = (unsigned int) &da850_opp_##freq, \
.frequency = freq * 1000, \
}
......@@ -1016,7 +1016,7 @@ static struct cpufreq_frequency_table da850_freq_table[] = {
OPP(200),
OPP(96),
{
.index = 0,
.driver_data = 0,
.frequency = CPUFREQ_TABLE_END,
},
};
......@@ -1044,7 +1044,7 @@ static int da850_set_voltage(unsigned int index)
if (!cvdd)
return -ENODEV;
opp = (struct da850_opp *) cpufreq_info.freq_table[index].index;
opp = (struct da850_opp *) cpufreq_info.freq_table[index].driver_data;
return regulator_set_voltage(cvdd, opp->cvdd_min, opp->cvdd_max);
}
......@@ -1125,7 +1125,7 @@ static int da850_set_pll0rate(struct clk *clk, unsigned long index)
struct pll_data *pll = clk->pll_data;
int ret;
opp = (struct da850_opp *) cpufreq_info.freq_table[index].index;
opp = (struct da850_opp *) cpufreq_info.freq_table[index].driver_data;
prediv = opp->prediv;
mult = opp->mult;
postdiv = opp->postdiv;
......
arch/arm/mach-s3c24xx/cpufreq-utils.c
浏览文件 @ 50701588
......@@ -60,5 +60,5 @@ void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
*/
void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg)
{
__raw_writel(cfg->pll.index, S3C2410_MPLLCON);
__raw_writel(cfg->pll.driver_data, S3C2410_MPLLCON);
}
arch/arm/mach-s3c24xx/cpufreq.c
浏览文件 @ 50701588
......@@ -70,7 +70,7 @@ static void s3c_cpufreq_getcur(struct s3c_cpufreq_config *cfg)
cfg->freq.pclk = pclk = clk_get_rate(clk_pclk);
cfg->freq.armclk = armclk = clk_get_rate(clk_arm);
cfg->pll.index = __raw_readl(S3C2410_MPLLCON);
cfg->pll.driver_data = __raw_readl(S3C2410_MPLLCON);
cfg->pll.frequency = fclk;
cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10);
......@@ -431,7 +431,7 @@ static unsigned int suspend_freq;
static int s3c_cpufreq_suspend(struct cpufreq_policy *policy)
{
suspend_pll.frequency = clk_get_rate(_clk_mpll);
suspend_pll.index = __raw_readl(S3C2410_MPLLCON);
suspend_pll.driver_data = __raw_readl(S3C2410_MPLLCON);
suspend_freq = s3c_cpufreq_get(0) * 1000;
return 0;
......
arch/arm/mach-s3c24xx/pll-s3c2410.c
浏览文件 @ 50701588
......@@ -33,36 +33,36 @@
#include <plat/cpu-freq-core.h>
static struct cpufreq_frequency_table pll_vals_12MHz[] = {
{ .frequency = 34000000, .index = PLLVAL(82, 2, 3), },
{ .frequency = 45000000, .index = PLLVAL(82, 1, 3), },
{ .frequency = 51000000, .index = PLLVAL(161, 3, 3), },
{ .frequency = 48000000, .index = PLLVAL(120, 2, 3), },
{ .frequency = 56000000, .index = PLLVAL(142, 2, 3), },
{ .frequency = 68000000, .index = PLLVAL(82, 2, 2), },
{ .frequency = 79000000, .index = PLLVAL(71, 1, 2), },
{ .frequency = 85000000, .index = PLLVAL(105, 2, 2), },
{ .frequency = 90000000, .index = PLLVAL(112, 2, 2), },
{ .frequency = 101000000, .index = PLLVAL(127, 2, 2), },
{ .frequency = 113000000, .index = PLLVAL(105, 1, 2), },
{ .frequency = 118000000, .index = PLLVAL(150, 2, 2), },
{ .frequency = 124000000, .index = PLLVAL(116, 1, 2), },
{ .frequency = 135000000, .index = PLLVAL(82, 2, 1), },
{ .frequency = 147000000, .index = PLLVAL(90, 2, 1), },
{ .frequency = 152000000, .index = PLLVAL(68, 1, 1), },
{ .frequency = 158000000, .index = PLLVAL(71, 1, 1), },
{ .frequency = 170000000, .index = PLLVAL(77, 1, 1), },
{ .frequency = 180000000, .index = PLLVAL(82, 1, 1), },
{ .frequency = 186000000, .index = PLLVAL(85, 1, 1), },
{ .frequency = 192000000, .index = PLLVAL(88, 1, 1), },
{ .frequency = 203000000, .index = PLLVAL(161, 3, 1), },
{ .frequency = 34000000, .driver_data = PLLVAL(82, 2, 3), },
{ .frequency = 45000000, .driver_data = PLLVAL(82, 1, 3), },
{ .frequency = 51000000, .driver_data = PLLVAL(161, 3, 3), },
{ .frequency = 48000000, .driver_data = PLLVAL(120, 2, 3), },
{ .frequency = 56000000, .driver_data = PLLVAL(142, 2, 3), },
{ .frequency = 68000000, .driver_data = PLLVAL(82, 2, 2), },
{ .frequency = 79000000, .driver_data = PLLVAL(71, 1, 2), },
{ .frequency = 85000000, .driver_data = PLLVAL(105, 2, 2), },
{ .frequency = 90000000, .driver_data = PLLVAL(112, 2, 2), },
{ .frequency = 101000000, .driver_data = PLLVAL(127, 2, 2), },
{ .frequency = 113000000, .driver_data = PLLVAL(105, 1, 2), },
{ .frequency = 118000000, .driver_data = PLLVAL(150, 2, 2), },
{ .frequency = 124000000, .driver_data = PLLVAL(116, 1, 2), },
{ .frequency = 135000000, .driver_data = PLLVAL(82, 2, 1), },
{ .frequency = 147000000, .driver_data = PLLVAL(90, 2, 1), },
{ .frequency = 152000000, .driver_data = PLLVAL(68, 1, 1), },
{ .frequency = 158000000, .driver_data = PLLVAL(71, 1, 1), },
{ .frequency = 170000000, .driver_data = PLLVAL(77, 1, 1), },
{ .frequency = 180000000, .driver_data = PLLVAL(82, 1, 1), },
{ .frequency = 186000000, .driver_data = PLLVAL(85, 1, 1), },
{ .frequency = 192000000, .driver_data = PLLVAL(88, 1, 1), },
{ .frequency = 203000000, .driver_data = PLLVAL(161, 3, 1), },
/* 2410A extras */
{ .frequency = 210000000, .index = PLLVAL(132, 2, 1), },
{ .frequency = 226000000, .index = PLLVAL(105, 1, 1), },
{ .frequency = 266000000, .index = PLLVAL(125, 1, 1), },
{ .frequency = 268000000, .index = PLLVAL(126, 1, 1), },
{ .frequency = 270000000, .index = PLLVAL(127, 1, 1), },
{ .frequency = 210000000, .driver_data = PLLVAL(132, 2, 1), },
{ .frequency = 226000000, .driver_data = PLLVAL(105, 1, 1), },
{ .frequency = 266000000, .driver_data = PLLVAL(125, 1, 1), },
{ .frequency = 268000000, .driver_data = PLLVAL(126, 1, 1), },
{ .frequency = 270000000, .driver_data = PLLVAL(127, 1, 1), },
};
static int s3c2410_plls_add(struct device *dev, struct subsys_interface *sif)
......
arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c
浏览文件 @ 50701588
......@@ -21,33 +21,33 @@
#include <plat/cpu-freq-core.h>
static struct cpufreq_frequency_table s3c2440_plls_12[] __initdata = {
{ .frequency = 75000000, .index = PLLVAL(0x75, 3, 3), }, /* FVco 600.000000 */
{ .frequency = 80000000, .index = PLLVAL(0x98, 4, 3), }, /* FVco 640.000000 */
{ .frequency = 90000000, .index = PLLVAL(0x70, 2, 3), }, /* FVco 720.000000 */
{ .frequency = 100000000, .index = PLLVAL(0x5c, 1, 3), }, /* FVco 800.000000 */
{ .frequency = 110000000, .index = PLLVAL(0x66, 1, 3), }, /* FVco 880.000000 */
{ .frequency = 120000000, .index = PLLVAL(0x70, 1, 3), }, /* FVco 960.000000 */
{ .frequency = 150000000, .index = PLLVAL(0x75, 3, 2), }, /* FVco 600.000000 */
{ .frequency = 160000000, .index = PLLVAL(0x98, 4, 2), }, /* FVco 640.000000 */
{ .frequency = 170000000, .index = PLLVAL(0x4d, 1, 2), }, /* FVco 680.000000 */
{ .frequency = 180000000, .index = PLLVAL(0x70, 2, 2), }, /* FVco 720.000000 */
{ .frequency = 190000000, .index = PLLVAL(0x57, 1, 2), }, /* FVco 760.000000 */
{ .frequency = 200000000, .index = PLLVAL(0x5c, 1, 2), }, /* FVco 800.000000 */
{ .frequency = 210000000, .index = PLLVAL(0x84, 2, 2), }, /* FVco 840.000000 */
{ .frequency = 220000000, .index = PLLVAL(0x66, 1, 2), }, /* FVco 880.000000 */
{ .frequency = 230000000, .index = PLLVAL(0x6b, 1, 2), }, /* FVco 920.000000 */
{ .frequency = 240000000, .index = PLLVAL(0x70, 1, 2), }, /* FVco 960.000000 */
{ .frequency = 300000000, .index = PLLVAL(0x75, 3, 1), }, /* FVco 600.000000 */
{ .frequency = 310000000, .index = PLLVAL(0x93, 4, 1), }, /* FVco 620.000000 */
{ .frequency = 320000000, .index = PLLVAL(0x98, 4, 1), }, /* FVco 640.000000 */
{ .frequency = 330000000, .index = PLLVAL(0x66, 2, 1), }, /* FVco 660.000000 */
{ .frequency = 340000000, .index = PLLVAL(0x4d, 1, 1), }, /* FVco 680.000000 */
{ .frequency = 350000000, .index = PLLVAL(0xa7, 4, 1), }, /* FVco 700.000000 */
{ .frequency = 360000000, .index = PLLVAL(0x70, 2, 1), }, /* FVco 720.000000 */
{ .frequency = 370000000, .index = PLLVAL(0xb1, 4, 1), }, /* FVco 740.000000 */
{ .frequency = 380000000, .index = PLLVAL(0x57, 1, 1), }, /* FVco 760.000000 */
{ .frequency = 390000000, .index = PLLVAL(0x7a, 2, 1), }, /* FVco 780.000000 */
{ .frequency = 400000000, .index = PLLVAL(0x5c, 1, 1), }, /* FVco 800.000000 */
{ .frequency = 75000000, .driver_data = PLLVAL(0x75, 3, 3), }, /* FVco 600.000000 */
{ .frequency = 80000000, .driver_data = PLLVAL(0x98, 4, 3), }, /* FVco 640.000000 */
{ .frequency = 90000000, .driver_data = PLLVAL(0x70, 2, 3), }, /* FVco 720.000000 */
{ .frequency = 100000000, .driver_data = PLLVAL(0x5c, 1, 3), }, /* FVco 800.000000 */
{ .frequency = 110000000, .driver_data = PLLVAL(0x66, 1, 3), }, /* FVco 880.000000 */
{ .frequency = 120000000, .driver_data = PLLVAL(0x70, 1, 3), }, /* FVco 960.000000 */
{ .frequency = 150000000, .driver_data = PLLVAL(0x75, 3, 2), }, /* FVco 600.000000 */
{ .frequency = 160000000, .driver_data = PLLVAL(0x98, 4, 2), }, /* FVco 640.000000 */
{ .frequency = 170000000, .driver_data = PLLVAL(0x4d, 1, 2), }, /* FVco 680.000000 */
{ .frequency = 180000000, .driver_data = PLLVAL(0x70, 2, 2), }, /* FVco 720.000000 */
{ .frequency = 190000000, .driver_data = PLLVAL(0x57, 1, 2), }, /* FVco 760.000000 */
{ .frequency = 200000000, .driver_data = PLLVAL(0x5c, 1, 2), }, /* FVco 800.000000 */
{ .frequency = 210000000, .driver_data = PLLVAL(0x84, 2, 2), }, /* FVco 840.000000 */
{ .frequency = 220000000, .driver_data = PLLVAL(0x66, 1, 2), }, /* FVco 880.000000 */
{ .frequency = 230000000, .driver_data = PLLVAL(0x6b, 1, 2), }, /* FVco 920.000000 */
{ .frequency = 240000000, .driver_data = PLLVAL(0x70, 1, 2), }, /* FVco 960.000000 */
{ .frequency = 300000000, .driver_data = PLLVAL(0x75, 3, 1), }, /* FVco 600.000000 */
{ .frequency = 310000000, .driver_data = PLLVAL(0x93, 4, 1), }, /* FVco 620.000000 */
{ .frequency = 320000000, .driver_data = PLLVAL(0x98, 4, 1), }, /* FVco 640.000000 */
{ .frequency = 330000000, .driver_data = PLLVAL(0x66, 2, 1), }, /* FVco 660.000000 */
{ .frequency = 340000000, .driver_data = PLLVAL(0x4d, 1, 1), }, /* FVco 680.000000 */
{ .frequency = 350000000, .driver_data = PLLVAL(0xa7, 4, 1), }, /* FVco 700.000000 */
{ .frequency = 360000000, .driver_data = PLLVAL(0x70, 2, 1), }, /* FVco 720.000000 */
{ .frequency = 370000000, .driver_data = PLLVAL(0xb1, 4, 1), }, /* FVco 740.000000 */
{ .frequency = 380000000, .driver_data = PLLVAL(0x57, 1, 1), }, /* FVco 760.000000 */
{ .frequency = 390000000, .driver_data = PLLVAL(0x7a, 2, 1), }, /* FVco 780.000000 */
{ .frequency = 400000000, .driver_data = PLLVAL(0x5c, 1, 1), }, /* FVco 800.000000 */
};
static int s3c2440_plls12_add(struct device *dev, struct subsys_interface *sif)
......
arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c
浏览文件 @ 50701588
......@@ -21,61 +21,61 @@
#include <plat/cpu-freq-core.h>
static struct cpufreq_frequency_table s3c2440_plls_169344[] __initdata = {
{ .frequency = 78019200, .index = PLLVAL(121, 5, 3), }, /* FVco 624.153600 */
{ .frequency = 84067200, .index = PLLVAL(131, 5, 3), }, /* FVco 672.537600 */
{ .frequency = 90115200, .index = PLLVAL(141, 5, 3), }, /* FVco 720.921600 */
{ .frequency = 96163200, .index = PLLVAL(151, 5, 3), }, /* FVco 769.305600 */
{ .frequency = 102135600, .index = PLLVAL(185, 6, 3), }, /* FVco 817.084800 */
{ .frequency = 108259200, .index = PLLVAL(171, 5, 3), }, /* FVco 866.073600 */
{ .frequency = 114307200, .index = PLLVAL(127, 3, 3), }, /* FVco 914.457600 */
{ .frequency = 120234240, .index = PLLVAL(134, 3, 3), }, /* FVco 961.873920 */
{ .frequency = 126161280, .index = PLLVAL(141, 3, 3), }, /* FVco 1009.290240 */
{ .frequency = 132088320, .index = PLLVAL(148, 3, 3), }, /* FVco 1056.706560 */
{ .frequency = 138015360, .index = PLLVAL(155, 3, 3), }, /* FVco 1104.122880 */
{ .frequency = 144789120, .index = PLLVAL(163, 3, 3), }, /* FVco 1158.312960 */
{ .frequency = 150100363, .index = PLLVAL(187, 9, 2), }, /* FVco 600.401454 */
{ .frequency = 156038400, .index = PLLVAL(121, 5, 2), }, /* FVco 624.153600 */
{ .frequency = 162086400, .index = PLLVAL(126, 5, 2), }, /* FVco 648.345600 */
{ .frequency = 168134400, .index = PLLVAL(131, 5, 2), }, /* FVco 672.537600 */
{ .frequency = 174048000, .index = PLLVAL(177, 7, 2), }, /* FVco 696.192000 */
{ .frequency = 180230400, .index = PLLVAL(141, 5, 2), }, /* FVco 720.921600 */
{ .frequency = 186278400, .index = PLLVAL(124, 4, 2), }, /* FVco 745.113600 */
{ .frequency = 192326400, .index = PLLVAL(151, 5, 2), }, /* FVco 769.305600 */
{ .frequency = 198132480, .index = PLLVAL(109, 3, 2), }, /* FVco 792.529920 */
{ .frequency = 204271200, .index = PLLVAL(185, 6, 2), }, /* FVco 817.084800 */
{ .frequency = 210268800, .index = PLLVAL(141, 4, 2), }, /* FVco 841.075200 */
{ .frequency = 216518400, .index = PLLVAL(171, 5, 2), }, /* FVco 866.073600 */
{ .frequency = 222264000, .index = PLLVAL(97, 2, 2), }, /* FVco 889.056000 */
{ .frequency = 228614400, .index = PLLVAL(127, 3, 2), }, /* FVco 914.457600 */
{ .frequency = 234259200, .index = PLLVAL(158, 4, 2), }, /* FVco 937.036800 */
{ .frequency = 240468480, .index = PLLVAL(134, 3, 2), }, /* FVco 961.873920 */
{ .frequency = 246960000, .index = PLLVAL(167, 4, 2), }, /* FVco 987.840000 */
{ .frequency = 252322560, .index = PLLVAL(141, 3, 2), }, /* FVco 1009.290240 */
{ .frequency = 258249600, .index = PLLVAL(114, 2, 2), }, /* FVco 1032.998400 */
{ .frequency = 264176640, .index = PLLVAL(148, 3, 2), }, /* FVco 1056.706560 */
{ .frequency = 270950400, .index = PLLVAL(120, 2, 2), }, /* FVco 1083.801600 */
{ .frequency = 276030720, .index = PLLVAL(155, 3, 2), }, /* FVco 1104.122880 */
{ .frequency = 282240000, .index = PLLVAL(92, 1, 2), }, /* FVco 1128.960000 */
{ .frequency = 289578240, .index = PLLVAL(163, 3, 2), }, /* FVco 1158.312960 */
{ .frequency = 294235200, .index = PLLVAL(131, 2, 2), }, /* FVco 1176.940800 */
{ .frequency = 300200727, .index = PLLVAL(187, 9, 1), }, /* FVco 600.401454 */
{ .frequency = 306358690, .index = PLLVAL(191, 9, 1), }, /* FVco 612.717380 */
{ .frequency = 312076800, .index = PLLVAL(121, 5, 1), }, /* FVco 624.153600 */
{ .frequency = 318366720, .index = PLLVAL(86, 3, 1), }, /* FVco 636.733440 */
{ .frequency = 324172800, .index = PLLVAL(126, 5, 1), }, /* FVco 648.345600 */
{ .frequency = 330220800, .index = PLLVAL(109, 4, 1), }, /* FVco 660.441600 */
{ .frequency = 336268800, .index = PLLVAL(131, 5, 1), }, /* FVco 672.537600 */
{ .frequency = 342074880, .index = PLLVAL(93, 3, 1), }, /* FVco 684.149760 */
{ .frequency = 348096000, .index = PLLVAL(177, 7, 1), }, /* FVco 696.192000 */
{ .frequency = 355622400, .index = PLLVAL(118, 4, 1), }, /* FVco 711.244800 */
{ .frequency = 360460800, .index = PLLVAL(141, 5, 1), }, /* FVco 720.921600 */
{ .frequency = 366206400, .index = PLLVAL(165, 6, 1), }, /* FVco 732.412800 */
{ .frequency = 372556800, .index = PLLVAL(124, 4, 1), }, /* FVco 745.113600 */
{ .frequency = 378201600, .index = PLLVAL(126, 4, 1), }, /* FVco 756.403200 */
{ .frequency = 384652800, .index = PLLVAL(151, 5, 1), }, /* FVco 769.305600 */
{ .frequency = 391608000, .index = PLLVAL(177, 6, 1), }, /* FVco 783.216000 */
{ .frequency = 396264960, .index = PLLVAL(109, 3, 1), }, /* FVco 792.529920 */
{ .frequency = 402192000, .index = PLLVAL(87, 2, 1), }, /* FVco 804.384000 */
{ .frequency = 78019200, .driver_data = PLLVAL(121, 5, 3), }, /* FVco 624.153600 */
{ .frequency = 84067200, .driver_data = PLLVAL(131, 5, 3), }, /* FVco 672.537600 */
{ .frequency = 90115200, .driver_data = PLLVAL(141, 5, 3), }, /* FVco 720.921600 */
{ .frequency = 96163200, .driver_data = PLLVAL(151, 5, 3), }, /* FVco 769.305600 */
{ .frequency = 102135600, .driver_data = PLLVAL(185, 6, 3), }, /* FVco 817.084800 */
{ .frequency = 108259200, .driver_data = PLLVAL(171, 5, 3), }, /* FVco 866.073600 */
{ .frequency = 114307200, .driver_data = PLLVAL(127, 3, 3), }, /* FVco 914.457600 */
{ .frequency = 120234240, .driver_data = PLLVAL(134, 3, 3), }, /* FVco 961.873920 */
{ .frequency = 126161280, .driver_data = PLLVAL(141, 3, 3), }, /* FVco 1009.290240 */
{ .frequency = 132088320, .driver_data = PLLVAL(148, 3, 3), }, /* FVco 1056.706560 */
{ .frequency = 138015360, .driver_data = PLLVAL(155, 3, 3), }, /* FVco 1104.122880 */
{ .frequency = 144789120, .driver_data = PLLVAL(163, 3, 3), }, /* FVco 1158.312960 */
{ .frequency = 150100363, .driver_data = PLLVAL(187, 9, 2), }, /* FVco 600.401454 */
{ .frequency = 156038400, .driver_data = PLLVAL(121, 5, 2), }, /* FVco 624.153600 */
{ .frequency = 162086400, .driver_data = PLLVAL(126, 5, 2), }, /* FVco 648.345600 */
{ .frequency = 168134400, .driver_data = PLLVAL(131, 5, 2), }, /* FVco 672.537600 */
{ .frequency = 174048000, .driver_data = PLLVAL(177, 7, 2), }, /* FVco 696.192000 */
{ .frequency = 180230400, .driver_data = PLLVAL(141, 5, 2), }, /* FVco 720.921600 */
{ .frequency = 186278400, .driver_data = PLLVAL(124, 4, 2), }, /* FVco 745.113600 */
{ .frequency = 192326400, .driver_data = PLLVAL(151, 5, 2), }, /* FVco 769.305600 */
{ .frequency = 198132480, .driver_data = PLLVAL(109, 3, 2), }, /* FVco 792.529920 */
{ .frequency = 204271200, .driver_data = PLLVAL(185, 6, 2), }, /* FVco 817.084800 */
{ .frequency = 210268800, .driver_data = PLLVAL(141, 4, 2), }, /* FVco 841.075200 */
{ .frequency = 216518400, .driver_data = PLLVAL(171, 5, 2), }, /* FVco 866.073600 */
{ .frequency = 222264000, .driver_data = PLLVAL(97, 2, 2), }, /* FVco 889.056000 */
{ .frequency = 228614400, .driver_data = PLLVAL(127, 3, 2), }, /* FVco 914.457600 */
{ .frequency = 234259200, .driver_data = PLLVAL(158, 4, 2), }, /* FVco 937.036800 */
{ .frequency = 240468480, .driver_data = PLLVAL(134, 3, 2), }, /* FVco 961.873920 */
{ .frequency = 246960000, .driver_data = PLLVAL(167, 4, 2), }, /* FVco 987.840000 */
{ .frequency = 252322560, .driver_data = PLLVAL(141, 3, 2), }, /* FVco 1009.290240 */
{ .frequency = 258249600, .driver_data = PLLVAL(114, 2, 2), }, /* FVco 1032.998400 */
{ .frequency = 264176640, .driver_data = PLLVAL(148, 3, 2), }, /* FVco 1056.706560 */
{ .frequency = 270950400, .driver_data = PLLVAL(120, 2, 2), }, /* FVco 1083.801600 */
{ .frequency = 276030720, .driver_data = PLLVAL(155, 3, 2), }, /* FVco 1104.122880 */
{ .frequency = 282240000, .driver_data = PLLVAL(92, 1, 2), }, /* FVco 1128.960000 */
{ .frequency = 289578240, .driver_data = PLLVAL(163, 3, 2), }, /* FVco 1158.312960 */
{ .frequency = 294235200, .driver_data = PLLVAL(131, 2, 2), }, /* FVco 1176.940800 */
{ .frequency = 300200727, .driver_data = PLLVAL(187, 9, 1), }, /* FVco 600.401454 */
{ .frequency = 306358690, .driver_data = PLLVAL(191, 9, 1), }, /* FVco 612.717380 */
{ .frequency = 312076800, .driver_data = PLLVAL(121, 5, 1), }, /* FVco 624.153600 */
{ .frequency = 318366720, .driver_data = PLLVAL(86, 3, 1), }, /* FVco 636.733440 */
{ .frequency = 324172800, .driver_data = PLLVAL(126, 5, 1), }, /* FVco 648.345600 */
{ .frequency = 330220800, .driver_data = PLLVAL(109, 4, 1), }, /* FVco 660.441600 */
{ .frequency = 336268800, .driver_data = PLLVAL(131, 5, 1), }, /* FVco 672.537600 */
{ .frequency = 342074880, .driver_data = PLLVAL(93, 3, 1), }, /* FVco 684.149760 */
{ .frequency = 348096000, .driver_data = PLLVAL(177, 7, 1), }, /* FVco 696.192000 */
{ .frequency = 355622400, .driver_data = PLLVAL(118, 4, 1), }, /* FVco 711.244800 */
{ .frequency = 360460800, .driver_data = PLLVAL(141, 5, 1), }, /* FVco 720.921600 */
{ .frequency = 366206400, .driver_data = PLLVAL(165, 6, 1), }, /* FVco 732.412800 */
{ .frequency = 372556800, .driver_data = PLLVAL(124, 4, 1), }, /* FVco 745.113600 */
{ .frequency = 378201600, .driver_data = PLLVAL(126, 4, 1), }, /* FVco 756.403200 */
{ .frequency = 384652800, .driver_data = PLLVAL(151, 5, 1), }, /* FVco 769.305600 */
{ .frequency = 391608000, .driver_data = PLLVAL(177, 6, 1), }, /* FVco 783.216000 */
{ .frequency = 396264960, .driver_data = PLLVAL(109, 3, 1), }, /* FVco 792.529920 */
{ .frequency = 402192000, .driver_data = PLLVAL(87, 2, 1), }, /* FVco 804.384000 */
};
static int s3c2440_plls169344_add(struct device *dev,
......
arch/arm/mach-shmobile/clock-sh7372.c
浏览文件 @ 50701588
......@@ -142,15 +142,15 @@ static void pllc2_table_rebuild(struct clk *clk)
/* Initialise PLLC2 frequency table */
for (i = 0; i < ARRAY_SIZE(pllc2_freq_table) - 2; i++) {
pllc2_freq_table[i].frequency = clk->parent->rate * (i + 20) * 2;
pllc2_freq_table[i].index = i;
pllc2_freq_table[i].driver_data = i;
}
/* This is a special entry - switching PLL off makes it a repeater */
pllc2_freq_table[i].frequency = clk->parent->rate;
pllc2_freq_table[i].index = i;
pllc2_freq_table[i].driver_data = i;
pllc2_freq_table[++i].frequency = CPUFREQ_TABLE_END;
pllc2_freq_table[i].index = i;
pllc2_freq_table[i].driver_data = i;
}
static unsigned long pllc2_recalc(struct clk *clk)
......
arch/arm/plat-samsung/include/plat/cpu-freq-core.h
浏览文件 @ 50701588
......@@ -285,7 +285,7 @@ static inline int s3c_cpufreq_addfreq(struct cpufreq_frequency_table *table,
s3c_freq_dbg("%s: { %d = %u kHz }\n",
__func__, index, freq);
table[index].index = index;
table[index].driver_data = index;
table[index].frequency = freq;
}
......
arch/mips/loongson/lemote-2f/clock.c
浏览文件 @ 50701588
......@@ -121,7 +121,8 @@ int clk_set_rate(struct clk *clk, unsigned long rate)
clk->rate = rate;
regval = LOONGSON_CHIPCFG0;
regval = (regval & ~0x7) | (loongson2_clockmod_table[i].index - 1);
regval = (regval & ~0x7) |
(loongson2_clockmod_table[i].driver_data - 1);
LOONGSON_CHIPCFG0 = regval;
return ret;
......
arch/powerpc/platforms/pasemi/cpufreq.c
浏览文件 @ 50701588
......@@ -204,7 +204,8 @@ static int pas_cpufreq_cpu_init(struct cpufreq_policy *policy)
/* initialize frequency table */
for (i=0; pas_freqs[i].frequency!=CPUFREQ_TABLE_END; i++) {
pas_freqs[i].frequency = get_astate_freq(pas_freqs[i].index) * 100000;
pas_freqs[i].frequency =
get_astate_freq(pas_freqs[i].driver_data) * 100000;
pr_debug("%d: %d\n", i, pas_freqs[i].frequency);
}
......@@ -280,7 +281,7 @@ static int pas_cpufreq_target(struct cpufreq_policy *policy,
pr_debug("setting frequency for cpu %d to %d kHz, 1/%d of max frequency\n",
policy->cpu,
pas_freqs[pas_astate_new].frequency,
pas_freqs[pas_astate_new].index);
pas_freqs[pas_astate_new].driver_data);
current_astate = pas_astate_new;
......
drivers/base/power/opp.c
浏览文件 @ 50701588
......@@ -648,14 +648,14 @@ int opp_init_cpufreq_table(struct device *dev,
list_for_each_entry(opp, &dev_opp->opp_list, node) {
if (opp->available) {
freq_table[i].index = i;
freq_table[i].driver_data = i;
freq_table[i].frequency = opp->rate / 1000;
i++;
}
}
mutex_unlock(&dev_opp_list_lock);
freq_table[i].index = i;
freq_table[i].driver_data = i;
freq_table[i].frequency = CPUFREQ_TABLE_END;
*table = &freq_table[0];
......
drivers/cpufreq/acpi-cpufreq.c
浏览文件 @ 50701588
......@@ -232,7 +232,7 @@ static unsigned extract_msr(u32 msr, struct acpi_cpufreq_data *data)
perf = data->acpi_data;
for (i = 0; data->freq_table[i].frequency != CPUFREQ_TABLE_END; i++) {
if (msr == perf->states[data->freq_table[i].index].status)
if (msr == perf->states[data->freq_table[i].driver_data].status)
return data->freq_table[i].frequency;
}
return data->freq_table[0].frequency;
......@@ -442,7 +442,7 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy,
goto out;
}
next_perf_state = data->freq_table[next_state].index;
next_perf_state = data->freq_table[next_state].driver_data;
if (perf->state == next_perf_state) {
if (unlikely(data->resume)) {
pr_debug("Called after resume, resetting to P%d\n",
......@@ -811,7 +811,7 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy)
data->freq_table[valid_states-1].frequency / 1000)
continue;
data->freq_table[valid_states].index = i;
data->freq_table[valid_states].driver_data = i;
data->freq_table[valid_states].frequency =
perf->states[i].core_frequency * 1000;
valid_states++;
......
drivers/cpufreq/blackfin-cpufreq.c
浏览文件 @ 50701588
......@@ -20,23 +20,23 @@
/* this is the table of CCLK frequencies, in Hz */
/* .index is the entry in the auxiliary dpm_state_table[] */
/* .driver_data is the entry in the auxiliary dpm_state_table[] */
static struct cpufreq_frequency_table bfin_freq_table[] = {
{
.frequency = CPUFREQ_TABLE_END,
.index = 0,
.driver_data = 0,
},
{
.frequency = CPUFREQ_TABLE_END,
.index = 1,
.driver_data = 1,
},
{
.frequency = CPUFREQ_TABLE_END,
.index = 2,
.driver_data = 2,
},
{
.frequency = CPUFREQ_TABLE_END,
.index = 0,
.driver_data = 0,
},
};
......
drivers/cpufreq/e_powersaver.c
浏览文件 @ 50701588
......@@ -188,7 +188,7 @@ static int eps_target(struct cpufreq_policy *policy,
}
/* Make frequency transition */
dest_state = centaur->freq_table[newstate].index & 0xffff;
dest_state = centaur->freq_table[newstate].driver_data & 0xffff;
ret = eps_set_state(centaur, policy, dest_state);
if (ret)
printk(KERN_ERR "eps: Timeout!\n");
......@@ -380,9 +380,9 @@ static int eps_cpu_init(struct cpufreq_policy *policy)
f_table = &centaur->freq_table[0];
if (brand != EPS_BRAND_C7M) {
f_table[0].frequency = fsb * min_multiplier;
f_table[0].index = (min_multiplier << 8) | min_voltage;
f_table[0].driver_data = (min_multiplier << 8) | min_voltage;
f_table[1].frequency = fsb * max_multiplier;
f_table[1].index = (max_multiplier << 8) | max_voltage;
f_table[1].driver_data = (max_multiplier << 8) | max_voltage;
f_table[2].frequency = CPUFREQ_TABLE_END;
} else {
k = 0;
......@@ -391,7 +391,7 @@ static int eps_cpu_init(struct cpufreq_policy *policy)
for (i = min_multiplier; i <= max_multiplier; i++) {
voltage = (k * step) / 256 + min_voltage;
f_table[k].frequency = fsb * i;
f_table[k].index = (i << 8) | voltage;
f_table[k].driver_data = (i << 8) | voltage;
k++;
}
f_table[k].frequency = CPUFREQ_TABLE_END;
......
drivers/cpufreq/freq_table.c
浏览文件 @ 50701588
......@@ -34,8 +34,8 @@ int cpufreq_frequency_table_cpuinfo(struct cpufreq_policy *policy,
continue;
}
pr_debug("table entry %u: %u kHz, %u index\n",
i, freq, table[i].index);
pr_debug("table entry %u: %u kHz, %u driver_data\n",
i, freq, table[i].driver_data);
if (freq < min_freq)
min_freq = freq;
if (freq > max_freq)
......@@ -97,11 +97,11 @@ int cpufreq_frequency_table_target(struct cpufreq_policy *policy,
unsigned int *index)
{
struct cpufreq_frequency_table optimal = {
.index = ~0,
.driver_data = ~0,
.frequency = 0,
};
struct cpufreq_frequency_table suboptimal = {
.index = ~0,
.driver_data = ~0,
.frequency = 0,
};
unsigned int i;
......@@ -129,12 +129,12 @@ int cpufreq_frequency_table_target(struct cpufreq_policy *policy,
if (freq <= target_freq) {
if (freq >= optimal.frequency) {
optimal.frequency = freq;
optimal.index = i;
optimal.driver_data = i;
}
} else {
if (freq <= suboptimal.frequency) {
suboptimal.frequency = freq;
suboptimal.index = i;
suboptimal.driver_data = i;
}
}
break;
......@@ -142,26 +142,26 @@ int cpufreq_frequency_table_target(struct cpufreq_policy *policy,
if (freq >= target_freq) {
if (freq <= optimal.frequency) {
optimal.frequency = freq;
optimal.index = i;
optimal.driver_data = i;
}
} else {
if (freq >= suboptimal.frequency) {
suboptimal.frequency = freq;
suboptimal.index = i;
suboptimal.driver_data = i;
}
}
break;
}
}
if (optimal.index > i) {
if (suboptimal.index > i)
if (optimal.driver_data > i) {
if (suboptimal.driver_data > i)
return -EINVAL;
*index = suboptimal.index;
*index = suboptimal.driver_data;
} else
*index = optimal.index;
*index = optimal.driver_data;
pr_debug("target is %u (%u kHz, %u)\n", *index, table[*index].frequency,
table[*index].index);
table[*index].driver_data);
return 0;
}
......
drivers/cpufreq/ia64-acpi-cpufreq.c
浏览文件 @ 50701588
......@@ -326,7 +326,7 @@ acpi_cpufreq_cpu_init (
/* table init */
for (i = 0; i <= data->acpi_data.state_count; i++)
{
data->freq_table[i].index = i;
data->freq_table[i].driver_data = i;
if (i < data->acpi_data.state_count) {
data->freq_table[i].frequency =
data->acpi_data.states[i].core_frequency * 1000;
......
drivers/cpufreq/kirkwood-cpufreq.c
浏览文件 @ 50701588
......@@ -59,7 +59,7 @@ static void kirkwood_cpufreq_set_cpu_state(struct cpufreq_policy *policy,
unsigned int index)
{
struct cpufreq_freqs freqs;
unsigned int state = kirkwood_freq_table[index].index;
unsigned int state = kirkwood_freq_table[index].driver_data;
unsigned long reg;
freqs.old = kirkwood_cpufreq_get_cpu_frequency(0);
......
drivers/cpufreq/longhaul.c
浏览文件 @ 50701588
......@@ -254,7 +254,7 @@ static void longhaul_setstate(struct cpufreq_policy *policy,
u32 bm_timeout = 1000;
unsigned int dir = 0;
mults_index = longhaul_table[table_index].index;
mults_index = longhaul_table[table_index].driver_data;
/* Safety precautions */
mult = mults[mults_index & 0x1f];
if (mult == -1)
......@@ -487,7 +487,7 @@ static int __cpuinit longhaul_get_ranges(void)
if (ratio > maxmult || ratio < minmult)
continue;
longhaul_table[k].frequency = calc_speed(ratio);
longhaul_table[k].index = j;
longhaul_table[k].driver_data = j;
k++;
}
if (k <= 1) {
......@@ -508,8 +508,8 @@ static int __cpuinit longhaul_get_ranges(void)
if (min_i != j) {
swap(longhaul_table[j].frequency,
longhaul_table[min_i].frequency);
swap(longhaul_table[j].index,
longhaul_table[min_i].index);
swap(longhaul_table[j].driver_data,
longhaul_table[min_i].driver_data);
}
}
......@@ -517,7 +517,7 @@ static int __cpuinit longhaul_get_ranges(void)
/* Find index we are running on */
for (j = 0; j < k; j++) {
if (mults[longhaul_table[j].index & 0x1f] == mult) {
if (mults[longhaul_table[j].driver_data & 0x1f] == mult) {
longhaul_index = j;
break;
}
......@@ -613,7 +613,7 @@ static void __cpuinit longhaul_setup_voltagescaling(void)
pos = (speed - min_vid_speed) / kHz_step + minvid.pos;
else
pos = minvid.pos;
longhaul_table[j].index |= mV_vrm_table[pos] << 8;
longhaul_table[j].driver_data |= mV_vrm_table[pos] << 8;
vid = vrm_mV_table[mV_vrm_table[pos]];
printk(KERN_INFO PFX "f: %d kHz, index: %d, vid: %d mV\n",
speed, j, vid.mV);
......@@ -656,12 +656,12 @@ static int longhaul_target(struct cpufreq_policy *policy,
* this in hardware, C3 is old and we need to do this
* in software. */
i = longhaul_index;
current_vid = (longhaul_table[longhaul_index].index >> 8);
current_vid = (longhaul_table[longhaul_index].driver_data >> 8);
current_vid &= 0x1f;
if (table_index > longhaul_index)
dir = 1;
while (i != table_index) {
vid = (longhaul_table[i].index >> 8) & 0x1f;
vid = (longhaul_table[i].driver_data >> 8) & 0x1f;
if (vid != current_vid) {
longhaul_setstate(policy, i);
current_vid = vid;
......
drivers/cpufreq/loongson2_cpufreq.c
浏览文件 @ 50701588
......@@ -72,7 +72,7 @@ static int loongson2_cpufreq_target(struct cpufreq_policy *policy,
freq =
((cpu_clock_freq / 1000) *
loongson2_clockmod_table[newstate].index) / 8;
loongson2_clockmod_table[newstate].driver_data) / 8;
if (freq < policy->min || freq > policy->max)
return -EINVAL;
......
drivers/cpufreq/p4-clockmod.c
浏览文件 @ 50701588
......@@ -118,7 +118,7 @@ static int cpufreq_p4_target(struct cpufreq_policy *policy,
return -EINVAL;
freqs.old = cpufreq_p4_get(policy->cpu);
freqs.new = stock_freq * p4clockmod_table[newstate].index / 8;
freqs.new = stock_freq * p4clockmod_table[newstate].driver_data / 8;
if (freqs.new == freqs.old)
return 0;
......@@ -131,7 +131,7 @@ static int cpufreq_p4_target(struct cpufreq_policy *policy,
* Developer's Manual, Volume 3
*/
for_each_cpu(i, policy->cpus)
cpufreq_p4_setdc(i, p4clockmod_table[newstate].index);
cpufreq_p4_setdc(i, p4clockmod_table[newstate].driver_data);
/* notifiers */
cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
......
drivers/cpufreq/powernow-k6.c
浏览文件 @ 50701588
......@@ -58,7 +58,7 @@ static int powernow_k6_get_cpu_multiplier(void)
msrval = POWERNOW_IOPORT + 0x0;
wrmsr(MSR_K6_EPMR, msrval, 0); /* disable it again */
return clock_ratio[(invalue >> 5)&7].index;
return clock_ratio[(invalue >> 5)&7].driver_data;
}
......@@ -75,13 +75,13 @@ static void powernow_k6_set_state(struct cpufreq_policy *policy,
unsigned long msrval;
struct cpufreq_freqs freqs;
if (clock_ratio[best_i].index > max_multiplier) {
if (clock_ratio[best_i].driver_data > max_multiplier) {
printk(KERN_ERR PFX "invalid target frequency\n");
return;
}
freqs.old = busfreq * powernow_k6_get_cpu_multiplier();
freqs.new = busfreq * clock_ratio[best_i].index;
freqs.new = busfreq * clock_ratio[best_i].driver_data;
cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
......@@ -156,7 +156,7 @@ static int powernow_k6_cpu_init(struct cpufreq_policy *policy)
/* table init */
for (i = 0; (clock_ratio[i].frequency != CPUFREQ_TABLE_END); i++) {
f = clock_ratio[i].index;
f = clock_ratio[i].driver_data;
if (f > max_multiplier)
clock_ratio[i].frequency = CPUFREQ_ENTRY_INVALID;
else
......
drivers/cpufreq/powernow-k7.c
浏览文件 @ 50701588
......@@ -186,7 +186,7 @@ static int get_ranges(unsigned char *pst)
fid = *pst++;
powernow_table[j].frequency = (fsb * fid_codes[fid]) / 10;
powernow_table[j].index = fid; /* lower 8 bits */
powernow_table[j].driver_data = fid; /* lower 8 bits */
speed = powernow_table[j].frequency;
......@@ -203,7 +203,7 @@ static int get_ranges(unsigned char *pst)
maximum_speed = speed;
vid = *pst++;
powernow_table[j].index |= (vid << 8); /* upper 8 bits */
powernow_table[j].driver_data |= (vid << 8); /* upper 8 bits */
pr_debug(" FID: 0x%x (%d.%dx [%dMHz]) "
"VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10,
......@@ -212,7 +212,7 @@ static int get_ranges(unsigned char *pst)
mobile_vid_table[vid]%1000);
}
powernow_table[number_scales].frequency = CPUFREQ_TABLE_END;
powernow_table[number_scales].index = 0;
powernow_table[number_scales].driver_data = 0;
return 0;
}
......@@ -260,8 +260,8 @@ static void change_speed(struct cpufreq_policy *policy, unsigned int index)
* vid are the upper 8 bits.
*/
fid = powernow_table[index].index & 0xFF;
vid = (powernow_table[index].index & 0xFF00) >> 8;
fid = powernow_table[index].driver_data & 0xFF;
vid = (powernow_table[index].driver_data & 0xFF00) >> 8;
rdmsrl(MSR_K7_FID_VID_STATUS, fidvidstatus.val);
cfid = fidvidstatus.bits.CFID;
......@@ -373,8 +373,8 @@ static int powernow_acpi_init(void)
fid = pc.bits.fid;
powernow_table[i].frequency = fsb * fid_codes[fid] / 10;
powernow_table[i].index = fid; /* lower 8 bits */
powernow_table[i].index |= (vid << 8); /* upper 8 bits */
powernow_table[i].driver_data = fid; /* lower 8 bits */
powernow_table[i].driver_data |= (vid << 8); /* upper 8 bits */
speed = powernow_table[i].frequency;
speed_mhz = speed / 1000;
......@@ -417,7 +417,7 @@ static int powernow_acpi_init(void)
}
powernow_table[i].frequency = CPUFREQ_TABLE_END;
powernow_table[i].index = 0;
powernow_table[i].driver_data = 0;
/* notify BIOS that we exist */
acpi_processor_notify_smm(THIS_MODULE);
......
drivers/cpufreq/powernow-k8.c
浏览文件 @ 50701588
......@@ -584,9 +584,9 @@ static void print_basics(struct powernow_k8_data *data)
CPUFREQ_ENTRY_INVALID) {
printk(KERN_INFO PFX
"fid 0x%x (%d MHz), vid 0x%x\n",
data->powernow_table[j].index & 0xff,
data->powernow_table[j].driver_data & 0xff,
data->powernow_table[j].frequency/1000,
data->powernow_table[j].index >> 8);
data->powernow_table[j].driver_data >> 8);
}
}
if (data->batps)
......@@ -632,13 +632,13 @@ static int fill_powernow_table(struct powernow_k8_data *data,
for (j = 0; j < data->numps; j++) {
int freq;
powernow_table[j].index = pst[j].fid; /* lower 8 bits */
powernow_table[j].index |= (pst[j].vid << 8); /* upper 8 bits */
powernow_table[j].driver_data = pst[j].fid; /* lower 8 bits */
powernow_table[j].driver_data |= (pst[j].vid << 8); /* upper 8 bits */
freq = find_khz_freq_from_fid(pst[j].fid);
powernow_table[j].frequency = freq;
}
powernow_table[data->numps].frequency = CPUFREQ_TABLE_END;
powernow_table[data->numps].index = 0;
powernow_table[data->numps].driver_data = 0;
if (query_current_values_with_pending_wait(data)) {
kfree(powernow_table);
......@@ -810,7 +810,7 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data)
powernow_table[data->acpi_data.state_count].frequency =
CPUFREQ_TABLE_END;
powernow_table[data->acpi_data.state_count].index = 0;
powernow_table[data->acpi_data.state_count].driver_data = 0;
data->powernow_table = powernow_table;
if (cpumask_first(cpu_core_mask(data->cpu)) == data->cpu)
......@@ -865,7 +865,7 @@ static int fill_powernow_table_fidvid(struct powernow_k8_data *data,
pr_debug(" %d : fid 0x%x, vid 0x%x\n", i, fid, vid);
index = fid | (vid<<8);
powernow_table[i].index = index;
powernow_table[i].driver_data = index;
freq = find_khz_freq_from_fid(fid);
powernow_table[i].frequency = freq;
......@@ -941,8 +941,8 @@ static int transition_frequency_fidvid(struct powernow_k8_data *data,
* the cpufreq frequency table in find_psb_table, vid
* are the upper 8 bits.
*/
fid = data->powernow_table[index].index & 0xFF;
vid = (data->powernow_table[index].index & 0xFF00) >> 8;
fid = data->powernow_table[index].driver_data & 0xFF;
vid = (data->powernow_table[index].driver_data & 0xFF00) >> 8;
pr_debug("table matched fid 0x%x, giving vid 0x%x\n", fid, vid);
......
drivers/cpufreq/ppc_cbe_cpufreq.c
浏览文件 @ 50701588
......@@ -106,7 +106,7 @@ static int cbe_cpufreq_cpu_init(struct cpufreq_policy *policy)
/* initialize frequency table */
for (i=0; cbe_freqs[i].frequency!=CPUFREQ_TABLE_END; i++) {
cbe_freqs[i].frequency = max_freq / cbe_freqs[i].index;
cbe_freqs[i].frequency = max_freq / cbe_freqs[i].driver_data;
pr_debug("%d: %d\n", i, cbe_freqs[i].frequency);
}
......@@ -165,7 +165,7 @@ static int cbe_cpufreq_target(struct cpufreq_policy *policy,
"1/%d of max frequency\n",
policy->cpu,
cbe_freqs[cbe_pmode_new].frequency,
cbe_freqs[cbe_pmode_new].index);
cbe_freqs[cbe_pmode_new].driver_data);
rc = set_pmode(policy->cpu, cbe_pmode_new);
......
drivers/cpufreq/pxa2xx-cpufreq.c
浏览文件 @ 50701588
......@@ -420,7 +420,7 @@ static int pxa_cpufreq_init(struct cpufreq_policy *policy)
/* Generate pxa25x the run cpufreq_frequency_table struct */
for (i = 0; i < NUM_PXA25x_RUN_FREQS; i++) {
pxa255_run_freq_table[i].frequency = pxa255_run_freqs[i].khz;
pxa255_run_freq_table[i].index = i;
pxa255_run_freq_table[i].driver_data = i;
}
pxa255_run_freq_table[i].frequency = CPUFREQ_TABLE_END;
......@@ -428,7 +428,7 @@ static int pxa_cpufreq_init(struct cpufreq_policy *policy)
for (i = 0; i < NUM_PXA25x_TURBO_FREQS; i++) {
pxa255_turbo_freq_table[i].frequency =
pxa255_turbo_freqs[i].khz;
pxa255_turbo_freq_table[i].index = i;
pxa255_turbo_freq_table[i].driver_data = i;
}
pxa255_turbo_freq_table[i].frequency = CPUFREQ_TABLE_END;
......@@ -440,9 +440,9 @@ static int pxa_cpufreq_init(struct cpufreq_policy *policy)
if (freq > pxa27x_maxfreq)
break;
pxa27x_freq_table[i].frequency = freq;
pxa27x_freq_table[i].index = i;
pxa27x_freq_table[i].driver_data = i;
}
pxa27x_freq_table[i].index = i;
pxa27x_freq_table[i].driver_data = i;
pxa27x_freq_table[i].frequency = CPUFREQ_TABLE_END;
/*
......
drivers/cpufreq/pxa3xx-cpufreq.c
浏览文件 @ 50701588
......@@ -98,10 +98,10 @@ static int setup_freqs_table(struct cpufreq_policy *policy,
return -ENOMEM;
for (i = 0; i < num; i++) {
table[i].index = i;
table[i].driver_data = i;
table[i].frequency = freqs[i].cpufreq_mhz * 1000;
}
table[num].index = i;
table[num].driver_data = i;
table[num].frequency = CPUFREQ_TABLE_END;
pxa3xx_freqs = freqs;
......
drivers/cpufreq/s3c2416-cpufreq.c
浏览文件 @ 50701588
......@@ -244,7 +244,7 @@ static int s3c2416_cpufreq_set_target(struct cpufreq_policy *policy,
if (ret != 0)
goto out;
idx = s3c_freq->freq_table[i].index;
idx = s3c_freq->freq_table[i].driver_data;
if (idx == SOURCE_HCLK)
to_dvs = 1;
......
drivers/cpufreq/s3c64xx-cpufreq.c
浏览文件 @ 50701588
......@@ -87,7 +87,7 @@ static int s3c64xx_cpufreq_set_target(struct cpufreq_policy *policy,
freqs.old = clk_get_rate(armclk) / 1000;
freqs.new = s3c64xx_freq_table[i].frequency;
freqs.flags = 0;
dvfs = &s3c64xx_dvfs_table[s3c64xx_freq_table[i].index];
dvfs = &s3c64xx_dvfs_table[s3c64xx_freq_table[i].driver_data];
if (freqs.old == freqs.new)
return 0;
......
drivers/cpufreq/sc520_freq.c
浏览文件 @ 50701588
......@@ -71,7 +71,7 @@ static void sc520_freq_set_cpu_state(struct cpufreq_policy *policy,
local_irq_disable();
clockspeed_reg = *cpuctl & ~0x03;
*cpuctl = clockspeed_reg | sc520_freq_table[state].index;
*cpuctl = clockspeed_reg | sc520_freq_table[state].driver_data;
local_irq_enable();
......
drivers/cpufreq/sparc-us2e-cpufreq.c
浏览文件 @ 50701588
......@@ -308,17 +308,17 @@ static int __init us2e_freq_cpu_init(struct cpufreq_policy *policy)
struct cpufreq_frequency_table *table =
&us2e_freq_table[cpu].table[0];
table[0].index = 0;
table[0].driver_data = 0;
table[0].frequency = clock_tick / 1;
table[1].index = 1;
table[1].driver_data = 1;
table[1].frequency = clock_tick / 2;
table[2].index = 2;
table[2].driver_data = 2;
table[2].frequency = clock_tick / 4;
table[2].index = 3;
table[2].driver_data = 3;
table[2].frequency = clock_tick / 6;
table[2].index = 4;
table[2].driver_data = 4;
table[2].frequency = clock_tick / 8;
table[2].index = 5;
table[2].driver_data = 5;
table[3].frequency = CPUFREQ_TABLE_END;
policy->cpuinfo.transition_latency = 0;
......
drivers/cpufreq/sparc-us3-cpufreq.c
浏览文件 @ 50701588
......@@ -169,13 +169,13 @@ static int __init us3_freq_cpu_init(struct cpufreq_policy *policy)
struct cpufreq_frequency_table *table =
&us3_freq_table[cpu].table[0];
table[0].index = 0;
table[0].driver_data = 0;
table[0].frequency = clock_tick / 1;
table[1].index = 1;
table[1].driver_data = 1;
table[1].frequency = clock_tick / 2;
table[2].index = 2;
table[2].driver_data = 2;
table[2].frequency = clock_tick / 32;
table[3].index = 0;
table[3].driver_data = 0;
table[3].frequency = CPUFREQ_TABLE_END;
policy->cpuinfo.transition_latency = 0;
......
drivers/cpufreq/spear-cpufreq.c
浏览文件 @ 50701588
......@@ -250,11 +250,11 @@ static int spear_cpufreq_driver_init(void)
}
for (i = 0; i < cnt; i++) {
freq_tbl[i].index = i;
freq_tbl[i].driver_data = i;
freq_tbl[i].frequency = be32_to_cpup(val++);
}
freq_tbl[i].index = i;
freq_tbl[i].driver_data = i;
freq_tbl[i].frequency = CPUFREQ_TABLE_END;
spear_cpufreq.freq_tbl = freq_tbl;
......
drivers/cpufreq/speedstep-centrino.c
浏览文件 @ 50701588
......@@ -79,11 +79,11 @@ static struct cpufreq_driver centrino_driver;
/* Computes the correct form for IA32_PERF_CTL MSR for a particular
frequency/voltage operating point; frequency in MHz, volts in mV.
This is stored as "index" in the structure. */
This is stored as "driver_data" in the structure. */
#define OP(mhz, mv) \
{ \
.frequency = (mhz) * 1000, \
.index = (((mhz)/100) << 8) | ((mv - 700) / 16) \
.driver_data = (((mhz)/100) << 8) | ((mv - 700) / 16) \
}
/*
......@@ -307,7 +307,7 @@ static unsigned extract_clock(unsigned msr, unsigned int cpu, int failsafe)
per_cpu(centrino_model, cpu)->op_points[i].frequency
!= CPUFREQ_TABLE_END;
i++) {
if (msr == per_cpu(centrino_model, cpu)->op_points[i].index)
if (msr == per_cpu(centrino_model, cpu)->op_points[i].driver_data)
return per_cpu(centrino_model, cpu)->
op_points[i].frequency;
}
......@@ -501,7 +501,7 @@ static int centrino_target (struct cpufreq_policy *policy,
break;
}
msr = per_cpu(centrino_model, cpu)->op_points[newstate].index;
msr = per_cpu(centrino_model, cpu)->op_points[newstate].driver_data;
if (first_cpu) {
rdmsr_on_cpu(good_cpu, MSR_IA32_PERF_CTL, &oldmsr, &h);
......
drivers/mfd/db8500-prcmu.c
浏览文件 @ 50701588
......@@ -1724,9 +1724,9 @@ static long round_clock_rate(u8 clock, unsigned long rate)
/* CPU FREQ table, may be changed due to if MAX_OPP is supported. */
static struct cpufreq_frequency_table db8500_cpufreq_table[] = {
{ .frequency = 200000, .index = ARM_EXTCLK,},
{ .frequency = 400000, .index = ARM_50_OPP,},
{ .frequency = 800000, .index = ARM_100_OPP,},
{ .frequency = 200000, .driver_data = ARM_EXTCLK,},
{ .frequency = 400000, .driver_data = ARM_50_OPP,},
{ .frequency = 800000, .driver_data = ARM_100_OPP,},
{ .frequency = CPUFREQ_TABLE_END,}, /* To be used for MAX_OPP. */
{ .frequency = CPUFREQ_TABLE_END,},
};
......@@ -1901,7 +1901,7 @@ static int set_armss_rate(unsigned long rate)
return -EINVAL;
/* Set the new arm opp. */
return db8500_prcmu_set_arm_opp(db8500_cpufreq_table[i].index);
return db8500_prcmu_set_arm_opp(db8500_cpufreq_table[i].driver_data);
}
static int set_plldsi_rate(unsigned long rate)
......@@ -3105,7 +3105,7 @@ static void db8500_prcmu_update_cpufreq(void)
{
if (prcmu_has_arm_maxopp()) {
db8500_cpufreq_table[3].frequency = 1000000;
db8500_cpufreq_table[3].index = ARM_MAX_OPP;
db8500_cpufreq_table[3].driver_data = ARM_MAX_OPP;
}
}
......
drivers/sh/clk/core.c
浏览文件 @ 50701588
......@@ -63,12 +63,12 @@ void clk_rate_table_build(struct clk *clk,
else
freq = clk->parent->rate * mult / div;
freq_table[i].index = i;
freq_table[i].driver_data = i;
freq_table[i].frequency = freq;
}
/* Termination entry */
freq_table[i].index = i;
freq_table[i].driver_data = i;
freq_table[i].frequency = CPUFREQ_TABLE_END;
}
......
include/linux/cpufreq.h
浏览文件 @ 50701588
......@@ -410,7 +410,7 @@ extern struct cpufreq_governor cpufreq_gov_conservative;
#define CPUFREQ_TABLE_END ~1
struct cpufreq_frequency_table {
unsigned int index; /* any */
unsigned int driver_data; /* driver specific data, not used by core */
unsigned int frequency; /* kHz - doesn't need to be in ascending
* order */
};
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或