- 22 10月, 2015 1 次提交
-
-
由 Eran Ben Elisha 提交于
ib_uverbs_ex_create_qp follows the extension verbs mechanism. New features (for example, QP creation flags field which is added in a downstream patch) could used via user-space libraries without breaking the ABI. Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com> Reviewed-by: NHaggai Eran <haggaie@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
- 13 6月, 2015 2 次提交
-
-
由 Matan Barak 提交于
In order to expose timestamp we need to expose two new attributes in query_device to be used for CQ completion time-stamping: timestamp_mask - how many bits are valid in the timestamp, where timestamp values could be 64bits the most. hca_core_clock - timestamp is given in HW cycles, the frequency in KHZ units of the HCA, necessary in order to convert cycles to seconds. This is added both to ib_query_device and its respective uverbs counterpart. Signed-off-by: NMatan Barak <matanb@mellanox.com> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Matan Barak 提交于
ib_uverbs_ex_create_cq follows the extension verbs mechanism. New features (for example, CQ creation flags field which is added in a downstream patch) could used via user-space libraries without breaking the ABI. Signed-off-by: NMatan Barak <matanb@mellanox.com> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
- 19 2月, 2015 2 次提交
-
-
由 Haggai Eran 提交于
Add on-demand paging capabilities reporting to the extended query device verb. Yann Droneaud writes: Note: as offsetof() is used to retrieve the size of the lower chunk of the response, beware that it only works if the upper chunk is right after, without any implicit padding. And, as the size of the latter chunk is added to the base size, implicit padding at the end of the structure is not taken in account. Both point must be taken in account when extending the uverbs functionalities. Signed-off-by: NHaggai Eran <haggaie@mellanox.com> Reviewed-by: NYann Droneaud <ydroneaud@opteya.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Eli Cohen 提交于
Add extensible query device capabilities verb to allow adding new features. ib_uverbs_ex_query_device is added and copy_query_dev_fields is used to copy capability fields to be used by both ib_uverbs_query_device and ib_uverbs_ex_query_device. Following the discussion about this patch [1], the code now validates the command's comp_mask is zero, returning -EINVAL for unknown values, in order to allow extending the verb in the future. The verb also checks the user-space provided response buffer size and only fills in capabilities that will fit in the buffer. In attempt to follow the spirit of presentation [2] by Tzahi Oved that was presented during OpenFabrics Alliance International Developer Workshop 2013, the comp_mask bits will only describe which fields are valid. Furthermore, fields that can simply be cleared when they are not supported, do not require a comp_mask bit at all. The verb returns a response_length field containing the actual number of bytes written by the kernel, so that a newer version running on an older kernel can tell which fields were actually returned. [1] [PATCH v1 0/5] IB/core: extended query device caps cleanup for v3.19 http://thread.gmane.org/gmane.linux.kernel.api/7889/ [2] https://www.openfabrics.org/images/docs/2013_Dev_Workshop/Tues_0423/2013_Workshop_Tues_0830_Tzahi_Oved-verbs_extensions_ofa_2013-tzahio.pdfSigned-off-by: NEli Cohen <eli@mellanox.com> Signed-off-by: NHaggai Eran <haggaie@mellanox.com> Reviewed-by: NYann Droneaud <ydroneaud@opteya.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
- 06 2月, 2015 1 次提交
-
-
由 Yann Droneaud 提交于
While commit 7e36ef82 ("IB/core: Temporarily disable ex_query_device uverb") is correct as it makes the extended QUERY_DEVICE uverb (which came as part of commit 5a77abf9 ("IB/core: Add support for extended query device caps") and commit 860f10a7 ("IB/core: Add flags for on demand paging support")) not available to userspace, it doesn't address the initial issue regarding ib_copy_to_udata() [1][2]. Additionally, further discussions around this new uverb seems to conclude it would require a different data structure than the one currently described in <rdma/ib_user_verbs.h> [3]. Both of these issues require a revert of the changes, so this patch partially reverts commit 8cdd312c ("IB/mlx5: Implement the ODP capability query verb") and commit 860f10a7 ("IB/core: Add flags for on demand paging support") and fully reverts commit 5a77abf9 ("IB/core: Add support for extended query device caps"). [1] "Re: [PATCH v3 06/17] IB/core: Add support for extended query device caps" http://mid.gmane.org/1418733236.2779.26.camel@opteya.com [2] "Re: [PATCH] IB/core: Temporarily disable ex_query_device uverb" http://mid.gmane.org/1423067503.3030.83.camel@opteya.com [3] "RE: [PATCH v1 1/5] IB/uverbs: ex_query_device: answer must not depend on request's comp_mask" http://mid.gmane.org/2807E5FD2F6FDA4886F6618EAC48510E0CC12C30@CRSMSX101.amr.corp.intel.com Cc: Eli Cohen <eli@mellanox.com> Cc: Haggai Eran <haggaie@mellanox.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Shachar Raindel <raindel@mellanox.com> Signed-off-by: NYann Droneaud <ydroneaud@opteya.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
- 16 12月, 2014 2 次提交
-
-
由 Sagi Grimberg 提交于
* Add a configuration option for enable on-demand paging support in the infiniband subsystem (CONFIG_INFINIBAND_ON_DEMAND_PAGING). In a later patch, this configuration option will select the MMU_NOTIFIER configuration option to enable mmu notifiers. * Add a flag for on demand paging (ODP) support in the IB device capabilities. * Add a flag to request ODP MR in the access flags to reg_mr. * Fail registrations done with the ODP flag when the low-level driver doesn't support this. * Change the conditions in which an MR will be writable to explicitly specify the access flags. This is to avoid making an MR writable just because it is an ODP MR. * Add a ODP capabilities to the extended query device verb. Signed-off-by: NSagi Grimberg <sagig@mellanox.com> Signed-off-by: NShachar Raindel <raindel@mellanox.com> Signed-off-by: NHaggai Eran <haggaie@mellanox.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Eli Cohen 提交于
Add extensible query device capabilities verb to allow adding new features. ib_uverbs_ex_query_device is added and copy_query_dev_fields is used to copy capability fields to be used by both ib_uverbs_query_device and ib_uverbs_ex_query_device. Signed-off-by: NEli Cohen <eli@mellanox.com> Signed-off-by: NHaggai Eran <haggaie@mellanox.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
- 02 8月, 2014 1 次提交
-
-
由 Matan Barak 提交于
Memory re-registration is a feature that enables changing the attributes of a memory region registered by user-space, including PD, translation (address and length) and access flags. Add the required support in uverbs and the kernel verbs API. Signed-off-by: NMatan Barak <matanb@mellanox.com> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
- 18 11月, 2013 7 次提交
-
-
由 Matan Barak 提交于
This commit reverts commit 7afbddfa ("IB/core: Temporarily disable create_flow/destroy_flow uverbs"). Since the uverbs extensions functionality was experimental for v3.12, this patch re-enables the support for them and flow-steering for v3.13. Signed-off-by: NMatan Barak <matanb@mellanox.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Yann Droneaud 提交于
Commit 400dbc96 ("IB/core: Infrastructure for extensible uverbs commands") added an infrastructure for extensible uverbs commands while later commit 436f2ad0 ("IB/core: Export ib_create/destroy_flow through uverbs") exported ib_create_flow()/ib_destroy_flow() functions using this new infrastructure. According to the commit 400dbc96, the purpose of this infrastructure is to support passing around provider (eg. hardware) specific buffers when userspace issue commands to the kernel, so that it would be possible to extend uverbs (eg. core) buffers independently from the provider buffers. But the new kernel command function prototypes were not modified to take advantage of this extension. This issue was exposed by Roland Dreier in a previous review[1]. So the following patch is an attempt to a revised extensible command infrastructure. This improved extensible command infrastructure distinguish between core (eg. legacy)'s command/response buffers from provider (eg. hardware)'s command/response buffers: each extended command implementing function is given a struct ib_udata to hold core (eg. uverbs) input and output buffers, and another struct ib_udata to hold the hw (eg. provider) input and output buffers. Having those buffers identified separately make it easier to increase one buffer to support extension without having to add some code to guess the exact size of each command/response parts: This should make the extended functions more reliable. Additionally, instead of relying on command identifier being greater than IB_USER_VERBS_CMD_THRESHOLD, the proposed infrastructure rely on unused bits in command field: on the 32 bits provided by command field, only 6 bits are really needed to encode the identifier of commands currently supported by the kernel. (Even using only 6 bits leaves room for about 23 new commands). So this patch makes use of some high order bits in command field to store flags, leaving enough room for more command identifiers than one will ever need (eg. 256). The new flags are used to specify if the command should be processed as an extended one or a legacy one. While designing the new command format, care was taken to make usage of flags itself extensible. Using high order bits of the commands field ensure that newer libibverbs on older kernel will properly fail when trying to call extended commands. On the other hand, older libibverbs on newer kernel will never be able to issue calls to extended commands. The extended command header includes the optional response pointer so that output buffer length and output buffer pointer are located together in the command, allowing proper parameters checking. This should make implementing functions easier and safer. Additionally the extended header ensure 64bits alignment, while making all sizes multiple of 8 bytes, extending the maximum buffer size: legacy extended Maximum command buffer: 256KBytes 1024KBytes (512KBytes + 512KBytes) Maximum response buffer: 256KBytes 1024KBytes (512KBytes + 512KBytes) For the purpose of doing proper buffer size accounting, the headers size are no more taken in account in "in_words". One of the odds of the current extensible infrastructure, reading twice the "legacy" command header, is fixed by removing the "legacy" command header from the extended command header: they are processed as two different parts of the command: memory is read once and information are not duplicated: it's making clear that's an extended command scheme and not a different command scheme. The proposed scheme will format input (command) and output (response) buffers this way: - command: legacy header + extended header + command data (core + hw): +----------------------------------------+ | flags | 00 00 | command | | in_words | out_words | +----------------------------------------+ | response | | response | | provider_in_words | provider_out_words | | padding | +----------------------------------------+ | | . <uverbs input> . . (in_words * 8) . | | +----------------------------------------+ | | . <provider input> . . (provider_in_words * 8) . | | +----------------------------------------+ - response, if present: +----------------------------------------+ | | . <uverbs output space> . . (out_words * 8) . | | +----------------------------------------+ | | . <provider output space> . . (provider_out_words * 8) . | | +----------------------------------------+ The overall design is to ensure that the extensible infrastructure is itself extensible while begin more reliable with more input and bound checking. Note: The unused field in the extended header would be perfect candidate to hold the command "comp_mask" (eg. bit field used to handle compatibility). This was suggested by Roland Dreier in a previous review[2]. But "comp_mask" field is likely to be present in the uverb input and/or provider input, likewise for the response, as noted by Matan Barak[3], so it doesn't make sense to put "comp_mask" in the header. [1]: http://marc.info/?i=CAL1RGDWxmM17W2o_era24A-TTDeKyoL6u3NRu_=t_dhV_ZA9MA@mail.gmail.com [2]: http://marc.info/?i=CAL1RGDXJtrc849M6_XNZT5xO1+ybKtLWGq6yg6LhoSsKpsmkYA@mail.gmail.com [3]: http://marc.info/?i=525C1149.6000701@mellanox.comSigned-off-by: NYann Droneaud <ydroneaud@opteya.com> Link: http://marc.info/?i=cover.1383773832.git.ydroneaud@opteya.com [ Convert "ret ? ret : 0" to the equivalent "ret". - Roland ] Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Yann Droneaud 提交于
The structure holding any types of flow_spec is of no use to userspace. It would be wrong for userspace to do: struct ib_uverbs_flow_spec flow_spec; flow_spec.type = IB_FLOW_SPEC_TCP; flow_spec.size = sizeof(flow_spec); Instead, userspace should use the dedicated flow_spec structure for - Ethernet : struct ib_uverbs_flow_spec_eth, - IPv4 : struct ib_uverbs_flow_spec_ipv4, - TCP/UDP : struct ib_uverbs_flow_spec_tcp_udp. In other words, struct ib_uverbs_flow_spec is a "virtual" data structure that can only be use by the kernel as an alias to the other. Signed-off-by: NYann Droneaud <ydroneaud@opteya.com> Link: http://marc.info/?i=cover.1383773832.git.ydroneaud@opteya.comSigned-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Yann Droneaud 提交于
A common header will allows better checking of flow specs size, while ensuring strict alignment to 64 bits. Signed-off-by: NYann Droneaud <ydroneaud@opteya.com> Link: http://marc.info/?i=cover.1383773832.git.ydroneaud@opteya.comSigned-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Yann Droneaud 提交于
This patch adds "flow" prefix to most of data structure added as part of commit 436f2ad0 ("IB/core: Export ib_create/destroy_flow through uverbs") to keep those names in sync with the data structures added in commit 319a441d ("IB/core: Add receive flow steering support"). It's just a matter of translating 'ib_flow' to 'ib_uverbs_flow'. Signed-off-by: NYann Droneaud <ydroneaud@opteya.com> Link: http://marc.info/?i=cover.1383773832.git.ydroneaud@opteya.comSigned-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Yann Droneaud 提交于
Commit 436f2ad0 ("IB/core: Export ib_create/destroy_flow through uverbs") added public data structures to support receive flow steering. The new structs are not following the 'uverbs' pattern: they're lacking the common prefix 'ib_uverbs'. This patch replaces ib_kern prefix by ib_uverbs. Signed-off-by: NYann Droneaud <ydroneaud@opteya.com> Link: http://marc.info/?i=cover.1383773832.git.ydroneaud@opteya.comSigned-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Matan Barak 提交于
This patch fixes the following issues: 1. Unneeded checks were removed 2. Removed the fixed size out of flow_attr.size, thus simplifying the checks. 3. Remove a 32bit hole on 64bit systems with strict alignment in struct ib_kern_flow_att by adding a reserved field. Signed-off-by: NMatan Barak <matanb@mellanox.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
- 22 10月, 2013 1 次提交
-
-
由 Yann Droneaud 提交于
The create_flow/destroy_flow uverbs and the associated extensions to the user-kernel verbs ABI are under review and are too experimental to freeze at this point. So userspace is not exposed to experimental features and an uinstable ABI, temporarily disable this for v3.12 (with a Kconfig option behind staging to reenable it if desired). The feature will be enabled after proper cleanup for v3.13. Signed-off-by: NYann Droneaud <ydroneaud@opteya.com> Link: http://marc.info/?i=cover.1381351016.git.ydroneaud@opteya.com Link: http://marc.info/?i=cover.1381177342.git.ydroneaud@opteya.com [ Add a Kconfig option to reenable these verbs. - Roland ] Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
- 29 8月, 2013 2 次提交
-
-
由 Hadar Hen Zion 提交于
Implement ib_uverbs_create_flow() and ib_uverbs_destroy_flow() to support flow steering for user space applications. Signed-off-by: NHadar Hen Zion <hadarh@mellanox.com> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Igor Ivanov 提交于
Add infrastructure to support extended uverbs capabilities in a forward/backward manner. Uverbs command opcodes which are based on the verbs extensions approach should be greater or equal to IB_USER_VERBS_CMD_THRESHOLD. They have new header format and processed a bit differently. Whenever a specific IB_USER_VERBS_CMD_XXX is extended, which practically means it needs to have additional arguments, we will be able to add them without creating a completely new IB_USER_VERBS_CMD_YYY command or bumping the uverbs ABI version. This patch for itself doesn't provide the whole scheme which is also dependent on adding a comp_mask field to each extended uverbs command struct. The new header framework allows for future extension of the CMD arguments (ib_uverbs_cmd_hdr.in_words, ib_uverbs_cmd_hdr.out_words) for an existing new command (that is a command that supports the new uverbs command header format suggested in this patch) w/o bumping ABI version and with maintaining backward and formward compatibility to new and old libibverbs versions. In the uverbs command we are passing both uverbs arguments and the provider arguments. We split the ib_uverbs_cmd_hdr.in_words to ib_uverbs_cmd_hdr.in_words which will now carry only uverbs input argument struct size and ib_uverbs_cmd_hdr.provider_in_words that will carry the provider input argument size. Same goes for the response (the uverbs CMD output argument). For example take the create_cq call and the mlx4_ib provider: The uverbs layer gets libibverb's struct ibv_create_cq (named struct ib_uverbs_create_cq in the kernel), mlx4_ib gets libmlx4's struct mlx4_create_cq (which includes struct ibv_create_cq and is named struct mlx4_ib_create_cq in the kernel) and in_words = sizeof(mlx4_create_cq)/4 . Thus ib_uverbs_cmd_hdr.in_words carry both uverbs plus mlx4_ib input argument sizes, where uverbs assumes it knows the size of its input argument - struct ibv_create_cq. Now, if we wish to add a variable to struct ibv_create_cq, we can add a comp_mask field to the struct which is basically bit field indicating which fields exists in the struct (as done for the libibverbs API extension), but we need a way to tell what is the total size of the struct and not assume the struct size is predefined (since we may get different struct sizes from different user libibverbs versions). So we know at which point the provider input argument (struct mlx4_create_cq) begins. Same goes for extending the provider struct mlx4_create_cq. Thus we split the ib_uverbs_cmd_hdr.in_words to ib_uverbs_cmd_hdr.in_words which will now carry only uverbs input argument struct size and ib_uverbs_cmd_hdr.provider_in_words that will carry the provider (mlx4_ib) input argument size. Signed-off-by: NIgor Ivanov <Igor.Ivanov@itseez.com> Signed-off-by: NHadar Hen Zion <hadarh@mellanox.com> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
- 22 2月, 2013 1 次提交
-
-
由 Shani Michaeli 提交于
The existing user/kernel uverbs API has IB_USER_VERBS_CMD_ALLOC/DEALLOC_MW. Implement these calls, along with destroying user memory windows during process cleanup. Signed-off-by: NHaggai Eran <haggaie@mellanox.com> Signed-off-by: NShani Michaeli <shanim@mellanox.com> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
- 22 11月, 2012 1 次提交
-
-
由 David Howells 提交于
Signed-off-by: NDavid Howells <dhowells@redhat.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NMichael Kerrisk <mtk.manpages@gmail.com> Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: NDave Jones <davej@redhat.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
- 14 10月, 2011 3 次提交
-
-
由 Sean Hefty 提交于
Allow processes that share the same XRC domain to open an existing shareable QP. This permits those processes to receive events on the shared QP and transfer ownership, so that any process may modify the QP. The latter allows the creating process to exit, while a remaining process can still transition it for path migration purposes. Signed-off-by: NSean Hefty <sean.hefty@intel.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Sean Hefty 提交于
We require additional information to create XRC SRQs than we can exchange using the existing create SRQ ABI. Provide an enhanced create ABI for extended SRQ types. Based on patches by Jack Morgenstein <jackm@dev.mellanox.co.il> and Roland Dreier <roland@purestorage.com> Signed-off-by: NSean Hefty <sean.hefty@intel.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Sean Hefty 提交于
Allow user space to create XRC domains. Because XRCDs are expected to be shared among multiple processes, we use inodes to identify an XRCD. Based on patches by Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: NSean Hefty <sean.hefty@intel.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
- 26 10月, 2010 1 次提交
-
-
由 Eli Cohen 提交于
Signed-off-by: NEli Cohen <eli@mellanox.co.il> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 15 7月, 2008 2 次提交
-
-
由 Steve Wise 提交于
This patch adds support for the IB "base memory management extension" (BMME) and the equivalent iWARP operations (which the iWARP verbs mandates all devices must implement). The new operations are: - Allocate an ib_mr for use in fast register work requests. - Allocate/free a physical buffer lists for use in fast register work requests. This allows device drivers to allocate this memory as needed for use in posting send requests (eg via dma_alloc_coherent). - New send queue work requests: * send with remote invalidate * fast register memory region * local invalidate memory region * RDMA read with invalidate local memory region (iWARP only) Consumer interface details: - A new device capability flag IB_DEVICE_MEM_MGT_EXTENSIONS is added to indicate device support for these features. - New send work request opcodes IB_WR_FAST_REG_MR, IB_WR_LOCAL_INV, IB_WR_RDMA_READ_WITH_INV are added. - A new consumer API function, ib_alloc_mr() is added to allocate fast register memory regions. - New consumer API functions, ib_alloc_fast_reg_page_list() and ib_free_fast_reg_page_list() are added to allocate and free device-specific memory for fast registration page lists. - A new consumer API function, ib_update_fast_reg_key(), is added to allow the key portion of the R_Key and L_Key of a fast registration MR to be updated. Consumers call this if desired before posting a IB_WR_FAST_REG_MR work request. Consumers can use this as follows: - MR is allocated with ib_alloc_mr(). - Page list memory is allocated with ib_alloc_fast_reg_page_list(). - MR R_Key/L_Key "key" field is updated with ib_update_fast_reg_key(). - MR made VALID and bound to a specific page list via ib_post_send(IB_WR_FAST_REG_MR) - MR made INVALID via ib_post_send(IB_WR_LOCAL_INV), ib_post_send(IB_WR_RDMA_READ_WITH_INV) or an incoming send with invalidate operation. - MR is deallocated with ib_dereg_mr() - page lists dealloced via ib_free_fast_reg_page_list(). Applications can allocate a fast register MR once, and then can repeatedly bind the MR to different physical block lists (PBLs) via posting work requests to a send queue (SQ). For each outstanding MR-to-PBL binding in the SQ pipe, a fast_reg_page_list needs to be allocated (the fast_reg_page_list is owned by the low-level driver from the consumer posting a work request until the request completes). Thus pipelining can be achieved while still allowing device-specific page_list processing. The 32-bit fast register memory key/STag is composed of a 24-bit index and an 8-bit key. The application can change the key each time it fast registers thus allowing more control over the peer's use of the key/STag (ie it can effectively be changed each time the rkey is rebound to a page list). Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Dotan Barak 提交于
Remove subversion $Id lines and improve readability by fixing other coding style problems pointed out by checkpatch.pl. Signed-off-by: NDotan Barak <dotanba@gmail.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 17 4月, 2008 1 次提交
-
-
由 Roland Dreier 提交于
Add a new IB_WR_SEND_WITH_INV send opcode that can be used to mark a "send with invalidate" work request as defined in the iWARP verbs and the InfiniBand base memory management extensions. Also put "imm_data" and a new "invalidate_rkey" member in a new "ex" union in struct ib_send_wr. The invalidate_rkey member can be used to pass in an R_Key/STag to be invalidated. Add this new union to struct ib_uverbs_send_wr. Add code to copy the invalidate_rkey field in ib_uverbs_post_send(). Fix up low-level drivers to deal with the change to struct ib_send_wr, and just remove the imm_data initialization from net/sunrpc/xprtrdma/, since that code never does any send with immediate operations. Also, move the existing IB_DEVICE_SEND_W_INV flag to a new bit, since the iWARP drivers currently in the tree set the bit. The amso1100 driver at least will silently fail to honor the IB_SEND_INVALIDATE bit if passed in as part of userspace send requests (since it does not implement kernel bypass work request queueing). Remove the flag from all existing drivers that set it until we know which ones are OK. The values chosen for the new flag is not consecutive to avoid clashing with flags defined in the XRC patches, which are not merged yet but which are already in use and are likely to be merged soon. This resurrects a patch sent long ago by Mikkel Hagen <mhagen@iol.unh.edu>. Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 31 10月, 2006 1 次提交
-
-
由 Jack Morgenstein 提交于
Return the sq_draining value back to user space for query_qp instead of the en_sqd_async notify value, which is valid only for modify_qp. For query_qp, the draining status should returned. Signed-off-by: NJack Morgenstein <jackm@mellanox.co.il> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 23 9月, 2006 1 次提交
-
-
由 Ralph Campbell 提交于
Add a ib_uverbs_resize_cq_resp.driver_data field so that low-level drivers can return data from a resize CQ operation to userspace. Have ib_uverbs_resize_cq() only copy the cqe field, to avoid having to bump the userspace ABI. Signed-off-by: NRalph Campbell <ralph.campbell@qlogic.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 18 6月, 2006 1 次提交
-
-
由 Sean Hefty 提交于
Provide common handling for marshalling data between userspace clients and kernel InfiniBand drivers. Signed-off-by: NSean Hefty <sean.hefty@intel.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 21 3月, 2006 6 次提交
-
-
由 Dotan Barak 提交于
Pass actual capacity of created SRQ back to userspace, so that userspace can report accurate capacities. This requires an ABI bump, to change struct ib_uverbs_create_srq_resp. Signed-off-by: NDotan Barak <dotanb@mellanox.co.il> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Roland Dreier 提交于
The size of struct ib_uverbs_create_qp_resp is not even multiple of 8 bytes. This causes problems for low-level drivers that add private data after the structure: 32-bit userspace will look in the wrong place for a response from a 64-bit kernel. Fix this by adding a reserved field. Also, bump the ABI version because this changes the size of a structure. Pointed out by Hoang-Nam Nguyen <HNGUYEN@de.ibm.com>. Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Dotan Barak 提交于
Add support to uverbs to handle querying userspace SRQs (shared receive queues), including adding an ABI for marshalling requests and responses. The kernel midlayer already has the underlying ib_query_srq() function. Signed-off-by: NDotan Barak <dotanb@mellanox.co.il> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Dotan Barak 提交于
Add support to uverbs to handle querying userspace QPs (queue pairs), including adding an ABI for marshalling requests and responses. The kernel midlayer already has the underlying ib_query_qp() function. Signed-off-by: NDotan Barak <dotanb@mellanox.co.il> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Roland Dreier 提交于
Remove trailing whitespace and fix indentation that with spaces instead of tabs. Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Roland Dreier 提交于
Add support to uverbs to handle resizing userspace CQs (completion queues), including adding an ABI for marshalling requests and responses. The kernel midlayer already has ib_resize_cq(). Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 11 11月, 2005 1 次提交
-
-
由 Jack Morgenstein 提交于
Move the computation of QP capabilities (max scatter/gather entries, max inline data, etc) into the kernel, and have the uverbs module return the values as part of the create QP response. This keeps precise knowledge of device limits in the low-level kernel driver. This requires an ABI bump, so while we're making changes, get rid of the max_sge parameter for the modify SRQ command -- it's not used and shouldn't be there. Signed-off-by: NJack Morgenstein <jackm@mellanox.co.il> Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 18 10月, 2005 2 次提交
-
-
由 Roland Dreier 提交于
Add kernel/user ABI structures for marshalling poll CQ, request CQ notification, post send, post receive, post SRQ receive, create AH and destroy AH commands. These commands allow us to support userspace verbs for devices that can't perform these operations directly from userspace (eg the PathScale HCA). Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Roland Dreier 提交于
Introduce new userspace verbs ABI version 3. This eliminates some unneeded commands, and adds support for user-created completion channels. This cleans up problems with file leaks on error paths, and also makes sure that file descriptors are always installed into the correct process. Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-