Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 08 7月, 2008 10 次提交
    • C
      x86: nmi_watchdog - use NMI_NONE by default · c376d454
      由 Cyrill Gorcunov 提交于 
      There is no need to keep NMI_DISABLED definition and use it
for nmi_watchdog by default. Here is the point why:

- IO-APIC and APIC chips are programmed for nmi_watchdog support at very
  early stage of kernel booting and not having nmi_watchdog specified as
  boot option lead only to nmi_watchdog becomes to NMI_NONE anyway
- enable nmi_watchdog thru /proc/sys/kernel/nmi if it was not specified at
  boot is not possible too (even having this sysfs entry)
Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com>
Cc: macro@linux-mips.org
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      c376d454
    • C
      x86: nmi_watchdog - use nmi_watchdog variable for printing · 116f570e
      由 Cyrill Gorcunov 提交于 
      Since it is possible NMI_ definitions could be changed
one day we better print out real nmi_watchdog value instead
of constant string.
Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com>
Cc: macro@linux-mips.org
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      116f570e
    • G
      x86: provide connect_bsp_APIC for x86_64 · b5841765
      由 Glauber Costa 提交于 
      Although it is not really needed, we provide it to get
closer to i386. ifdefs around it are removed in smpboot.c
Signed-off-by: NGlauber Costa <gcosta@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      b5841765
    • J
      x86: fix stack overflow for large values of MAX_APICS · b6df1b8b
      由 Jack Steiner 提交于 
      physid_mask_of_physid() causes a huge stack (12k) to be created if the
number of APICS is large. Replace physid_mask_of_physid() with a
new function that does not create large stacks. This is a problem only
on large x86_64 systems.

this paves the way to increase MAX_APICS.
Signed-off-by: NJack Steiner <steiner@sgi.com>
Cc: linux-mm@kvack.org
Cc: mingo@elte.hu
Cc: tglx@linutronix.de
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      b6df1b8b
    • M
      x86: cleanup early per cpu variables/accesses v4 · 23ca4bba
      由 Mike Travis 提交于 
        * Introduce a new PER_CPU macro called "EARLY_PER_CPU".  This is
    used by some per_cpu variables that are initialized and accessed
    before there are per_cpu areas allocated.

    ["Early" in respect to per_cpu variables is "earlier than the per_cpu
    areas have been setup".]

    This patchset adds these new macros:

	DEFINE_EARLY_PER_CPU(_type, _name, _initvalue)
	EXPORT_EARLY_PER_CPU_SYMBOL(_name)
	DECLARE_EARLY_PER_CPU(_type, _name)

	early_per_cpu_ptr(_name)
	early_per_cpu_map(_name, _idx)
	early_per_cpu(_name, _cpu)

    The DEFINE macro defines the per_cpu variable as well as the early
    map and pointer.  It also initializes the per_cpu variable and map
    elements to "_initvalue".  The early_* macros provide access to
    the initial map (usually setup during system init) and the early
    pointer.  This pointer is initialized to point to the early map
    but is then NULL'ed when the actual per_cpu areas are setup.  After
    that the per_cpu variable is the correct access to the variable.

    The early_per_cpu() macro is not very efficient but does show how to
    access the variable if you have a function that can be called both
    "early" and "late".  It tests the early ptr to be NULL, and if not
    then it's still valid.  Otherwise, the per_cpu variable is used
    instead:

	#define early_per_cpu(_name, _cpu) 			\
		(early_per_cpu_ptr(_name) ?			\
			early_per_cpu_ptr(_name)[_cpu] :	\
			per_cpu(_name, _cpu))

    A better method is to actually check the pointer manually.  In the
    case below, numa_set_node can be called both "early" and "late":

	void __cpuinit numa_set_node(int cpu, int node)
	{
	    int *cpu_to_node_map = early_per_cpu_ptr(x86_cpu_to_node_map);

	    if (cpu_to_node_map)
		    cpu_to_node_map[cpu] = node;
	    else
		    per_cpu(x86_cpu_to_node_map, cpu) = node;
	}

  * Add a flag "arch_provides_topology_pointers" that indicates pointers
    to topology cpumask_t maps are available.  Otherwise, use the function
    returning the cpumask_t value.  This is useful if cpumask_t set size
    is very large to avoid copying data on to/off of the stack.

  * The coverage of CONFIG_DEBUG_PER_CPU_MAPS has been increased while
    the non-debug case has been optimized a bit.

  * Remove an unreferenced compiler warning in drivers/base/topology.c

  * Clean up #ifdef in setup.c

For inclusion into sched-devel/latest tree.

Based on:
	git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
    +   sched-devel/latest  .../mingo/linux-2.6-sched-devel.git
Signed-off-by: NMike Travis <travis@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
      23ca4bba
    • M
      x86: APIC/UP: Downgrade the NMI watchdog for no I/O APIC · acae7d90
      由 Maciej W. Rozycki 提交于 
       If configured to use the I/O APIC, the NMI watchdog is deemed to fail if
the chip will not be used in the UP configuration, because "noapic" has
been specified or the chip is simply not there.  Downgrade to the local
APIC watchdog to rectify.

The new #ifdef is ugly, I know.  A proper solution is to provide suitable
definitions of smp_found_config, etc. for !CONFIG_X86_IO_APIC in a header.
Likewise the whole if () condition should be moved to a static inline
function.  Such clean-ups are beyond the scope of this change and can be
done once the whole issue of the timer has been sorted out.
Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      acae7d90
    • I
      Revert "x86, io-apic: fix nmi_watchdog=1 bootup hang" · ab5a5be0
      由 Ingo Molnar 提交于 
      This reverts commit 2229ff84f01746d02fb6b79e156fb5cce48c908f.

A better fix from Maciej will be merged.
      ab5a5be0
    • I
      x86, io-apic: fix nmi_watchdog=1 bootup hang · ff11571b
      由 Ingo Molnar 提交于 
      nmi_watchdog=1 hangs on 64-bit:

[    0.250000] Detected 12.564 MHz APIC timer.
[    0.254178] APIC timer registered as dummy, due to nmi_watchdog=1!
[    0.260366] Testing NMI watchdog ... <4>WARNING: CPU#0: NMI appears to be stuck (0->0)!
[    ...     ]
[    0.470003] calling  genl_init+0x0/0xd0
[  hard hang ]

bisected it down to:

 git-bisect start
 git-bisect good 1beee8dc
 git-bisect bad 11582ece0aaa2d0f94f345c08a4ab9997078a083
 git-bisect bad 5479c623bb44089844022c03d4c0eb16d5b7a15f
 git-bisect bad cfb4c7fabeb499e1c29f9d1878968e37a938e28a
 git-bisect good 246dd412
 git-bisect bad 3f8237eaff7dc1e35fa791dae095574fd974e671
 git-bisect good 90e23b13ab849e2a11f00c655eb3a2011b4623be
 git-bisect bad 833526a34eeefc117df3191a594c3c3a4f15a9ac
 git-bisect good 791b93d3dfaf16c23e978bec0cc0a3dd9d855d63
 git-bisect bad 65767c64068f2c93e56a1accfed5c78230ac12d7
 git-bisect bad 2abc5c05dd82c188e3bdf6641a274f013348d14b
 git-bisect bad 317e1f2597ffb4d4db940577bbe56dc6e881ef07

| 317e1f2597ffb4d4db940577bbe56dc6e881ef07 is first bad commit
| commit 317e1f2597ffb4d4db940577bbe56dc6e881ef07
| Author: Maciej W. Rozycki <macro@linux-mips.org>
| Date:   Wed May 21 22:10:22 2008 +0100
|     x86: I/O APIC: clean up the 8259A on a NMI watchdog failure

the problem is that in the dummy-lapic branch we rely on the i8259A
but if the NMI watchdog fails we turn off IRQ 0 - which doesnt work
too well ;-)
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      ff11571b
    • T
      x86: apic_64.c fix sparse warnings about shadowed variables · 431ee79d
      由 Thomas Gleixner 提交于 
      Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      431ee79d
    • T
      x86, clockevents: add C1E aware idle function · aa276e1c
      由 Thomas Gleixner 提交于 
      C1E on AMD machines is like C3 but without control from the OS. Up to
now we disabled the local apic timer for those machines as it stops
when the CPU goes into C1E. This excludes those machines from high
resolution timers / dynamic ticks, which hurts especially X2 based
laptops.

The current boot time C1E detection has another, more serious flaw
as well: some BIOSes do not enable C1E until the ACPI processor module
is loaded. This causes systems to stop working after that point.

To work nicely with C1E enabled machines we use a separate idle
function, which checks on idle entry whether C1E was enabled in the
Interrupt Pending Message MSR. This allows us to do timer broadcasting
for C1E and covers the late enablement of C1E as well.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      aa276e1c
  3. 10 6月, 2008 1 次提交
  5. 25 5月, 2008 1 次提交
  7. 23 5月, 2008 1 次提交
  9. 26 4月, 2008 1 次提交
  11. 25 4月, 2008 1 次提交
  13. 17 4月, 2008 15 次提交
  15. 30 1月, 2008 10 次提交