x86: change bios_cpu_apicid to percpu data variable

Change static bios_cpu_apicid array to a per_cpu data variable.
This includes using a static array used during initialization
similar to the way x86_cpu_to_apicid[] is handled.

There is one early use of bios_cpu_apicid in apic_is_clustered_box().
The other reference in cpu_present_to_apicid() is called after
smp_set_apicids() has setup the percpu version of bios_cpu_apicid.

[ mingo@elte.hu: build fix ]
Signed-off-by: NMike Travis <travis@sgi.com>
Reviewed-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

arch/x86/kernel/apic_64.c

@@ -1180,14 +1180,26 @@ __cpuinit int apic_is_clustered_box(void)
 	bitmap_zero(clustermap, NUM_APIC_CLUSTERS);
 
 	for (i = 0; i < NR_CPUS; i++) {
-		id = bios_cpu_apicid[i];
+		/* are we being called early in kernel startup? */
+		if (x86_bios_cpu_apicid_early_ptr) {
+			id = ((u16 *)x86_bios_cpu_apicid_early_ptr)[i];
+		}
+		else if (i < nr_cpu_ids) {
+			if (cpu_present(i))
+				id = per_cpu(x86_bios_cpu_apicid, i);
+			else
+				continue;
+		}
+		else
+			break;
+
 		if (id != BAD_APICID)
 			__set_bit(APIC_CLUSTERID(id), clustermap);
 	}
 
 	/* Problem:  Partially populated chassis may not have CPUs in some of
 	 * the APIC clusters they have been allocated.  Only present CPUs have
-	 * bios_cpu_apicid entries, thus causing zeroes in the bitmap.  Since
+	 * x86_bios_cpu_apicid entries, thus causing zeroes in the bitmap.  Since
 	 * clusters are allocated sequentially, count zeros only if they are
 	 * bounded by ones.
 	 */

arch/x86/kernel/mpparse_64.c

@@ -67,7 +67,11 @@ unsigned disabled_cpus __cpuinitdata;
 /* Bitmask of physically existing CPUs */
 physid_mask_t phys_cpu_present_map = PHYSID_MASK_NONE;
 
-u16 bios_cpu_apicid[NR_CPUS] = { [0 ... NR_CPUS-1] = BAD_APICID };
+u16 x86_bios_cpu_apicid_init[NR_CPUS] __initdata
+				= { [0 ... NR_CPUS-1] = BAD_APICID };
+void *x86_bios_cpu_apicid_early_ptr;
+DEFINE_PER_CPU(u16, x86_bios_cpu_apicid) = BAD_APICID;
+EXPORT_PER_CPU_SYMBOL(x86_bios_cpu_apicid);
 
 
 /*
@@ -118,19 +122,22 @@ static void __cpuinit MP_processor_info(struct mpc_config_processor *m)
 	physid_set(m->mpc_apicid, phys_cpu_present_map);
  	if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) {
  		/*
- 		 * bios_cpu_apicid is required to have processors listed
+ 		 * x86_bios_cpu_apicid is required to have processors listed
  		 * in same order as logical cpu numbers. Hence the first
  		 * entry is BSP, and so on.
  		 */
 		cpu = 0;
  	}
-	bios_cpu_apicid[cpu] = m->mpc_apicid;
 	/* are we being called early in kernel startup? */
 	if (x86_cpu_to_apicid_early_ptr) {
-		u16 *x86_cpu_to_apicid = (u16 *)x86_cpu_to_apicid_early_ptr;
-		x86_cpu_to_apicid[cpu] = m->mpc_apicid;
+		u16 *cpu_to_apicid = (u16 *)x86_cpu_to_apicid_early_ptr;
+		u16 *bios_cpu_apicid = (u16 *)x86_bios_cpu_apicid_early_ptr;
+
+		cpu_to_apicid[cpu] = m->mpc_apicid;
+		bios_cpu_apicid[cpu] = m->mpc_apicid;
 	} else {
 		per_cpu(x86_cpu_to_apicid, cpu) = m->mpc_apicid;
+		per_cpu(x86_bios_cpu_apicid, cpu) = m->mpc_apicid;
 	}
 
 	cpu_set(cpu, cpu_possible_map);

arch/x86/kernel/setup_64.c

@@ -362,8 +362,11 @@ void __init setup_arch(char **cmdline_p)
 #ifdef CONFIG_SMP
 	/* setup to use the early static init tables during kernel startup */
 	x86_cpu_to_apicid_early_ptr = (void *)&x86_cpu_to_apicid_init;
+#ifdef CONFIG_NUMA
 	x86_cpu_to_node_map_early_ptr = (void *)&x86_cpu_to_node_map_init;
 #endif
+	x86_bios_cpu_apicid_early_ptr = (void *)&x86_bios_cpu_apicid_init;
+#endif
 
 #ifdef CONFIG_ACPI
 	/*

arch/x86/kernel/smpboot_64.c

@@ -864,8 +864,12 @@ void __init smp_set_apicids(void)
 		if (per_cpu_offset(cpu)) {
 			per_cpu(x86_cpu_to_apicid, cpu) =
 						x86_cpu_to_apicid_init[cpu];
+#ifdef CONFIG_NUMA
 			per_cpu(x86_cpu_to_node_map, cpu) =
 						x86_cpu_to_node_map_init[cpu];
+#endif
+			per_cpu(x86_bios_cpu_apicid, cpu) =
+						x86_bios_cpu_apicid_init[cpu];
 		}
 		else
 			printk(KERN_NOTICE "per_cpu_offset zero for cpu %d\n",
@@ -874,7 +878,10 @@ void __init smp_set_apicids(void)
 
 	/* indicate the early static arrays are gone */
 	x86_cpu_to_apicid_early_ptr = NULL;
+#ifdef CONFIG_NUMA
 	x86_cpu_to_node_map_early_ptr = NULL;
+#endif
+	x86_bios_cpu_apicid_early_ptr = NULL;
 }
 
 static void __init smp_cpu_index_default(void)

include/asm-x86/smp_64.h

@@ -27,18 +27,20 @@ extern int smp_call_function_mask(cpumask_t mask, void (*func)(void *),
 				  void *info, int wait);
 
 extern u16 __initdata x86_cpu_to_apicid_init[];
+extern u16 __initdata x86_bios_cpu_apicid_init[];
 extern void *x86_cpu_to_apicid_early_ptr;
-extern u16 bios_cpu_apicid[];
+extern void *x86_bios_cpu_apicid_early_ptr;
 
 DECLARE_PER_CPU(cpumask_t, cpu_sibling_map);
 DECLARE_PER_CPU(cpumask_t, cpu_core_map);
 DECLARE_PER_CPU(u16, cpu_llc_id);
 DECLARE_PER_CPU(u16, x86_cpu_to_apicid);
+DECLARE_PER_CPU(u16, x86_bios_cpu_apicid);
 
 static inline int cpu_present_to_apicid(int mps_cpu)
 {
-	if (mps_cpu < NR_CPUS)
-		return (int)bios_cpu_apicid[mps_cpu];
+	if (cpu_present(mps_cpu))
+		return (int)per_cpu(x86_bios_cpu_apicid, mps_cpu);
 	else
 		return BAD_APICID;
 }