The FEC fix patch fixed locking on 11,681 Ghz, but not on 12,692 Ghz for
me.
Reviewed-by: NManu Abraham <manu@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Reduced unused buffer size to 64.
Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Reduce buffer size of Interupt urb to 128 bytes and polling
interval to 8.

The devices buffer appears to only handle a maxium of 40 bytes.
If the buffer is full a slowing effect is noticed causing occasionnal
dropped streaming packets.
Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Unplugging uvc video camera trigger following oops:

eeepc kernel: [ 1393.500719] usb 3-2: USB disconnect, device number 4
eeepc kernel: [ 1393.504351] uvcvideo: Failed to resubmit video URB (-19).
eeepc kernel: [ 1495.428853] BUG: unable to handle kernel paging request at 6b6b6bcb
eeepc kernel: [ 1495.429017] IP: [<b0358d37>] dev_get_drvdata+0x17/0x20
eeepc kernel: [ 1495.429017] *pde = 00000000
eeepc kernel: [ 1495.429017] Oops: 0000 [#1] DEBUG_PAGEALLOC
eeepc kernel: [ 1495.429017]
eeepc kernel: [ 1495.429017] Pid: 3476, comm: cheese Not tainted 3.1.0-rc3-00270-g7a54f5e1-dirty #485 ASUSTeK Computer INC. 900/900
eeepc kernel: [ 1495.429017] EIP: 0060:[<b0358d37>] EFLAGS: 00010202 CPU: 0
eeepc kernel: [ 1495.429017] EIP is at dev_get_drvdata+0x17/0x20
eeepc kernel: [ 1495.429017] EAX: 6b6b6b6b EBX: eb08d870 ECX: 00000000 EDX: eb08d930
eeepc kernel: [ 1495.429017] ESI: eb08d870 EDI: eb08d870 EBP: d3249cac ESP: d3249cac
eeepc kernel: [ 1495.429017]  DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068
eeepc kernel: [ 1495.429017] Process cheese (pid: 3476, ti=d3248000 task=df46d870 task.ti=d3248000)
eeepc kernel: [ 1495.429017] Stack:
eeepc kernel: [ 1495.429017]  d3249cb8 b03e77a1 d307b840 d3249ccc b03e77d1 d307b840 eb08d870 eb08d830
eeepc kernel: [ 1495.429017]  d3249ce4 b03ed3b7 00000246 d307b840 eb08d870 d3021b80 d3249cec b03ed565
eeepc kernel: [ 1495.429017]  d3249cfc b03e044d e8323d10 b06e013c d3249d18 b0355fb9 fffffffe d3249d1c
eeepc kernel: [ 1495.429017] Call Trace:
eeepc kernel: [ 1495.429017]  [<b03e77a1>] v4l2_device_disconnect+0x11/0x30
eeepc kernel: [ 1495.429017]  [<b03e77d1>] v4l2_device_unregister+0x11/0x50
eeepc kernel: [ 1495.429017]  [<b03ed3b7>] uvc_delete+0x37/0x110
eeepc kernel: [ 1495.429017]  [<b03ed565>] uvc_release+0x25/0x30
eeepc kernel: [ 1495.429017]  [<b03e044d>] v4l2_device_release+0x9d/0xc0
eeepc kernel: [ 1495.429017]  [<b0355fb9>] device_release+0x19/0x90
eeepc kernel: [ 1495.429017]  [<b03adfdc>] ? usb_hcd_unlink_urb+0x7c/0x90
eeepc kernel: [ 1495.429017]  [<b026b99c>] kobject_release+0x3c/0x90
eeepc kernel: [ 1495.429017]  [<b026b960>] ? kobject_del+0x30/0x30
eeepc kernel: [ 1495.429017]  [<b026ca4c>] kref_put+0x2c/0x60
eeepc kernel: [ 1495.429017]  [<b026b88d>] kobject_put+0x1d/0x50
eeepc kernel: [ 1495.429017]  [<b03b2385>] ? usb_autopm_put_interface+0x25/0x30
eeepc kernel: [ 1495.429017]  [<b03f0e5d>] ? uvc_v4l2_release+0x5d/0xd0
eeepc kernel: [ 1495.429017]  [<b0355d2f>] put_device+0xf/0x20
eeepc kernel: [ 1495.429017]  [<b03dfa96>] v4l2_release+0x56/0x60
eeepc kernel: [ 1495.429017]  [<b019c8dc>] fput+0xcc/0x220
eeepc kernel: [ 1495.429017]  [<b01990f4>] filp_close+0x44/0x70
eeepc kernel: [ 1495.429017]  [<b012b238>] put_files_struct+0x158/0x180
eeepc kernel: [ 1495.429017]  [<b012b100>] ? put_files_struct+0x20/0x180
eeepc kernel: [ 1495.429017]  [<b012b2a0>] exit_files+0x40/0x50
eeepc kernel: [ 1495.429017]  [<b012b9e7>] do_exit+0x5a7/0x660
eeepc kernel: [ 1495.429017]  [<b0135f72>] ? __dequeue_signal+0x12/0x120
eeepc kernel: [ 1495.429017]  [<b055edf2>] ? _raw_spin_unlock_irq+0x22/0x30
eeepc kernel: [ 1495.429017]  [<b012badc>] do_group_exit+0x3c/0xb0
eeepc kernel: [ 1495.429017]  [<b015792b>] ? trace_hardirqs_on+0xb/0x10
eeepc kernel: [ 1495.429017]  [<b013755f>] get_signal_to_deliver+0x18f/0x570
eeepc kernel: [ 1495.429017]  [<b01020f7>] do_signal+0x47/0x9e0
eeepc kernel: [ 1495.429017]  [<b055edf2>] ? _raw_spin_unlock_irq+0x22/0x30
eeepc kernel: [ 1495.429017]  [<b015792b>] ? trace_hardirqs_on+0xb/0x10
eeepc kernel: [ 1495.429017]  [<b0123300>] ? T.1034+0x30/0xc0
eeepc kernel: [ 1495.429017]  [<b055c45f>] ? schedule+0x29f/0x640
eeepc kernel: [ 1495.429017]  [<b0102ac8>] do_notify_resume+0x38/0x40
eeepc kernel: [ 1495.429017]  [<b055f154>] work_notifysig+0x9/0x11
eeepc kernel: [ 1495.429017] Code: e5 5d 83 f8 01 19 c0 f7 d0 83 e0 f0 c3 8d b4 26 00 00 00 00 55 85 c0 89 e5 75 09 31 c0 5d c3 90 8d 74 26 00 8b 40 04 85 c0 74 f0 <8b> 40 60 5d c3 8d 74 26 00 55 89 e5 53 89 c3 83 ec 04 8b 40 04
eeepc kernel: [ 1495.429017] EIP: [<b0358d37>] dev_get_drvdata+0x17/0x20 SS:ESP 0068:d3249cac
eeepc kernel: [ 1495.429017] CR2: 000000006b6b6bcb
eeepc kernel: [ 1495.466975] uvcvideo: Failed to resubmit video URB (-27).
eeepc kernel: [ 1495.467860] uvcvideo: Failed to resubmit video URB (-27).
eeepc kernel: last message repeated 3 times
eeepc kernel: [ 1495.512610] ---[ end trace 73ec16848794e5a5 ]---

For uvc device, dev->vdev.dev is the &intf->dev,
uvc_delete code is as below:
	usb_put_intf(dev->intf);
	usb_put_dev(dev->udev);

	uvc_status_cleanup(dev);
	uvc_ctrl_cleanup_device(dev);

	if (dev->vdev.dev)
		v4l2_device_unregister(&dev->vdev);

Fix it by get_device in v4l2_device_register and put_device in v4l2_device_disconnect
Reported-by: NSitsofe Wheeler <sitsofe@yahoo.com>
Signed-off-by: NDave Young <hidave.darkstar@gmail.com>
Tested-by: NSitsofe Wheeler <sitsofe@yahoo.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

On 04/09/11 00:49, Mauro Carvalho Chehab wrote:
> This is an automatic generated email to let you know that the following patch were queued at the
> http://git.linuxtv.org/media_tree.git tree:
>
> Subject: [media] em28xx: use atomic bit operations for devices-in-use mask
> Author:  Chris Rankin<rankincj@yahoo.com>
> Date:    Sat Aug 20 08:21:03 2011 -0300
>
> Use atomic bit operations for the em28xx_devused mask, to prevent an
> unlikely race condition should two adapters be plugged in
> simultaneously. The operations also clearer than explicit bit
> manipulation anyway.
>
> Signed-off-by: Chris Rankin<rankincj@yahoo.com>
> Signed-off-by: Mauro Carvalho Chehab<mchehab@redhat.com>
>
>   drivers/media/video/em28xx/em28xx-cards.c |   33 ++++++++++++++---------------

I think you missed this line in the merge.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The Cinergy Hybrid cards are known not to need an artificial delay after
USB accesses so the quirk can safely be enabled.
Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Some devices support fast access to registers using the USB interface
while others require a certain delay after each operation. This commit
adds a quirk that can be enabled by devices that don't need the delay.
Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The MT9T001 is a parallel 3MP sensor from Aptina (formerly Micron)
controlled through I2C.

The driver creates a V4L2 subdevice. It currently supports binning and
cropping, and the gain, exposure, test pattern and black level controls.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

If streaming can't be enabled on the pipeline, the DMA buffers queue is
not emptied. If the buffers then get freed the queue will end up
referencing free memory. This is usually not an issue, as the DMA queue
will be reinitialized the next time streaming is enabled, before
enabling the hardware.

However, if the sensor connected at the pipeline input is free-running,
the CCDC will start generating interrupts as soon as it gets powered up,
before the streaming gets enabled on the hardware. This will make the
CCDC interrupt handler access freed memory, causing a crash.

Reinitialize the DMA buffers queue in isp_video_streamon() if the error
path to make sure this situation won't happen.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The code handles subdevs with no s_stream operation correctly, but
returns -ENOIOCTLCMD by mistake if the first subdev in the chain has no
s_stream operation. Return 0 in that case.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Fix section mismatch in the MFC driver.
Reported-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

adp1653.c uses interfaces that are provided by <linux/module.h>
and needs to include that header file to fix build errors.

and more.
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The imon devices have either 1 or 2 usb interfaces on them, each wired
up to its own urb callback. The interface 0 urb callback is wired up
before the imon context's rc_dev pointer is filled in, which is
necessary for imon 0xffdc device auto-detection to work properly, but we
need to make sure we don't actually run the callback routines until
we've entirely filled in the necessary bits for each given interface,
lest we wind up oopsing. Technically, any imon device could have hit
this, but the issue is exacerbated on the 0xffdc devices, which send a
constant stream of interrupts, even when they have no valid key data.

CC: Andy Walls <awalls@md.metrocast.net>
CC: Chris W <lkml@psychogeeks.com>
Reported-by: NChris W <lkml@psychogeeks.com>
Signed-off-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The following patch provides wider carrier search.

As with existing code search starts at MSB aligned. The boundary
is widened to start at -9.  In order to save time, if no carrier is
detected at the start it advances to the next alignment until carrier
is found.

The stv0288 will detect a DVB-S2 carrier on all steps , a
time out of 11 steps is introduced to drop out of the loop.

In stv0288_set_symbol carrier and timing loops are restored to
default values (inittab) before setting the symbol rate on each tune. A
slight drift was noticed with full scan in the higher IF frequencies of
each band.
Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

It is now not needed as the sensor identification is done
through the media controller API.
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

SR030PC30, NOON010PC30, M5MOLS are camera sensors so better place
for them is under the "Camera sensors" Kconfig section.
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Remove the now unneeded check for the platform data in s_power
handler and the platform data pointer in struct noon010_info.
Also do not reset the configured output resolution and pixel
format when cycling sensor's power.
Add small delay for proper reset signal shape.
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Replace g/s_mbus_fmt ops with the pad level get/set_fmt operations.
Add media entity initialization and set subdev flags so the host driver
creates a subdev device node for the driver.
A mutex was added for serializing the subdev operations. When setting
format is attempted during streaming an (EBUSY) error will be returned.

After the device is powered up it will now remain in "power sleep"
mode until s_stream(1) is called. The "power sleep" mode is used
to suspend/resume frame generation at the sensor's output through
s_stream op.
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

 Use resource_size function on resource object
 instead of explicit computation.

 The semantic patch that makes this output is available
 in scripts/coccinelle/api/resource_size.cocci.

 More information about semantic patching is available at
 http://coccinelle.lip6.fr/Signed-off-by: NThomas Meyer <thomas@m3y3r.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NMichael Grzeschik <m.grzeschik@pengutronix.de>
Acked-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

s_stream does nothing in current form so remove it.
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NKyungmin Park <kyungin.park@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Now that the auto cluster core changed to a different scheme of how to
handle volatile controls (including how to switch from auto to manual mode)
the pwc code can be simplified to use that new core support.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The problem tackled in this patch is how to handle volatile autoclusters
correctly. A volatile autocluster is a cluster of related controls where one
control is the control that toggles between manual and auto mode and the other
controls are the values for the manual mode. For example autogain and gain,
autoexposure and exposure, etc.

If the hardware lets you read out the automatically calculated manual values
while in automode, then those manual controls should be marked volatile.

gain value as calculated by the autogain circuitry, then you would mark the
gain control as volatile (i.e. continuously changing).

The question in such use cases is what to do when switching from the auto
mode to the manual mode. Should we switch to the last set manual values or
should the volatile values be copied and used as the initial manual values.

For example: suppose the mode is manual gain and gain is set to 5. Then
autogain is turned on and the gain is set by the hardware to 2. Finally
the user switches back to manual gain. What should the gain be? 2 or 5?

After a long discussion the decisions was made to keep the last value as
calculated by the auto mode (so 2 in the example above).

The reason is that webcams that do such things will adapt themselves to
the current light conditions and when you switch back to manual mode you
expect that you keep the same picture. If you would switch back to old
manual values, then that would give you a suddenly different picture,
which is jarring for the user.

Additionally, this would be difficult to implement in applications that
store and restore the control values at application exit and start.

If you want to keep the old manual values when you switch from auto to
manual, then there would have to be a way for applications to get hold
of those old values while in auto mode, but there isn't.

So this patch will do all the heavy lifting in v4l2-ctrls.c: if you go
from auto mode to manual mode and the manual controls are volatile, then
g_volatile_ctrl will be called to get the current values for the manual
controls before switching to manual mode.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Thanks to Greg Tangey for prompting me to merge this.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

it9135 was the only one intended with spaces as others are tabs.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

msleep() => usleep_range()
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NChris Rankin <rankincj@yahoo.com>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

TDA10071 firmware version 1.21.31.2
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NMichael Krufky <mkrufky@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NMichael Krufky <mkrufky@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NMichael Krufky <mkrufky@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NMichael Krufky <mkrufky@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NMichael Krufky <mkrufky@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NMichael Krufky <mkrufky@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>