[media] saa7164: Adding support for HVR2200 card id 0x8953

Thanks to Greg Tangey for prompting me to merge this.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/video/saa7164/saa7164-cards.c

@@ -447,6 +447,62 @@ struct saa7164_board saa7164_boards[] = {
 			.i2c_reg_len	= REGLEN_8bit,
 		} },
 	},
+	[SAA7164_BOARD_HAUPPAUGE_HVR2200_5] = {
+		.name		= "Hauppauge WinTV-HVR2200",
+		.porta		= SAA7164_MPEG_DVB,
+		.portb		= SAA7164_MPEG_DVB,
+		.chiprev	= SAA7164_CHIP_REV3,
+		.unit		= {{
+			.id		= 0x23,
+			.type		= SAA7164_UNIT_EEPROM,
+			.name		= "4K EEPROM",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_0,
+			.i2c_bus_addr	= 0xa0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x04,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "TDA18271-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x05,
+			.type		= SAA7164_UNIT_ANALOG_DEMODULATOR,
+			.name		= "TDA8290-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0x84 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x21,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "TDA18271-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x22,
+			.type		= SAA7164_UNIT_ANALOG_DEMODULATOR,
+			.name		= "TDA8290-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0x84 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x24,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "TDA10048-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0x10 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x25,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "TDA10048-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0x12 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		} },
+	},
 };
 const unsigned int saa7164_bcount = ARRAY_SIZE(saa7164_boards);
 
@@ -490,6 +546,10 @@ struct saa7164_subid saa7164_subids[] = {
 		.subvendor = 0x0070,
 		.subdevice = 0x8940,
 		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2200_4,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x8953,
+		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2200_5,
 	},
 };
 const unsigned int saa7164_idcount = ARRAY_SIZE(saa7164_subids);
@@ -534,6 +594,7 @@ void saa7164_gpio_setup(struct saa7164_dev *dev)
 	case SAA7164_BOARD_HAUPPAUGE_HVR2200_2:
 	case SAA7164_BOARD_HAUPPAUGE_HVR2200_3:
 	case SAA7164_BOARD_HAUPPAUGE_HVR2200_4:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2200_5:
 	case SAA7164_BOARD_HAUPPAUGE_HVR2250:
 	case SAA7164_BOARD_HAUPPAUGE_HVR2250_2:
 	case SAA7164_BOARD_HAUPPAUGE_HVR2250_3:
@@ -615,6 +676,7 @@ void saa7164_card_setup(struct saa7164_dev *dev)
 	case SAA7164_BOARD_HAUPPAUGE_HVR2200_2:
 	case SAA7164_BOARD_HAUPPAUGE_HVR2200_3:
 	case SAA7164_BOARD_HAUPPAUGE_HVR2200_4:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2200_5:
 	case SAA7164_BOARD_HAUPPAUGE_HVR2250:
 	case SAA7164_BOARD_HAUPPAUGE_HVR2250_2:
 	case SAA7164_BOARD_HAUPPAUGE_HVR2250_3:

drivers/media/video/saa7164/saa7164-dvb.c

@@ -476,6 +476,7 @@ int saa7164_dvb_register(struct saa7164_port *port)
 	case SAA7164_BOARD_HAUPPAUGE_HVR2200_2:
 	case SAA7164_BOARD_HAUPPAUGE_HVR2200_3:
 	case SAA7164_BOARD_HAUPPAUGE_HVR2200_4:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2200_5:
 		i2c_bus = &dev->i2c_bus[port->nr + 1];
 		switch (port->nr) {
 		case 0:

drivers/media/video/saa7164/saa7164.h

@@ -83,6 +83,7 @@
 #define SAA7164_BOARD_HAUPPAUGE_HVR2250_2	7
 #define SAA7164_BOARD_HAUPPAUGE_HVR2250_3	8
 #define SAA7164_BOARD_HAUPPAUGE_HVR2200_4	9
+#define SAA7164_BOARD_HAUPPAUGE_HVR2200_5	10
 
 #define SAA7164_MAX_UNITS		8
 #define SAA7164_TS_NUMBER_OF_LINES	312