The license header was missing in micrel_phy.h . This patch adds
one.
Signed-off-by: NMarek Vasut <marex@denx.de>
Cc: David J. Choi <david.choi@micrel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is no such part as KS8001, KS8041 or KS8051. There are only
KSZ8001, KSZ8041 and KSZ8051. Rename these parts as such to match
the Micrel naming.
Signed-off-by: NMarek Vasut <marex@denx.de>
Cc: David J. Choi <david.choi@micrel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Cc: Linux ARM kernel <linux-arm-kernel@lists.infradead.org>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The KSZ8021 PHY was previously caught by KS8051, which is not correct.
This PHY needs additional setup if it is strapped for address 0. In such
case an reserved bit must be written in the 0x16, "Operation Mode Strap
Override" register. According to the KS8051 datasheet, that bit means
"PHY Address 0 in non-broadcast" and it indeed behaves as such on KSZ8021.
The issue where the ethernet controller (Freescale FEC) did not communicate
with network is fixed by writing this bit as 1.
Signed-off-by: NMarek Vasut <marex@denx.de>
Cc: David J. Choi <david.choi@micrel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When PPPOE is running over a virtual ethernet interface (e.g., a
bonding interface) and the user tries to delete the interface in case
the PPPOE state is ZOMBIE, the kernel will loop forever while
unregistering net_device for the reference count is not decreased to
zero which should have been done with dev_put().
Signed-off-by: NXiaodong Xu <stid.smth@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On some hw, link is not up during adding iface to team. That causes event
not being sent to userspace and that may cause confusion.
Fix this bug by sending port changed event once it's added to team.
Signed-off-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

icmp_filter() should not modify its input, or else its caller
would need to recompute ip_hdr() if skb->head is reallocated.

Use skb_header_pointer() instead of pskb_may_pull() and
change the prototype to make clear both sk and skb are const.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently the driver has no MODULE_LICENSE attribute in its source which
results in a kernel taint if I load this:

root@(none):~# modprobe bcm87xx
bcm87xx: module license 'unspecified' taints kernel.

Since the first lines of the source code clearly state:
 * This file is subject to the terms and conditions of the GNU General
 * Public License.  See the file "COPYING" in the main directory of this
 * archive for more details.
I think it's safe to add the MODULE_LICENSE("GPL") macro and thus remove
the kernel taint.

Cc: stable@vger.kernel.org
Signed-off-by: NPeter Huewe <peterhuewe@gmx.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull networking updates from David Miller:
 "More bug fixes, nothing gets past these guys"

 1) More kernel info leaks found by Mathias Krause, this time in the
    IPSEC configuration layers.

 2) When IPSEC policies change, we do not properly make sure that cached
    routes (which could now be stale) throughout the system will be
    revalidated.  Fix this by generalizing the generation count
    invalidation scheme used by ipv4.  From Nicolas Dichtel.

 3) When repairing TCP sockets, we need to allow to restore not just the
    send window scale, but the receive one too.  Extend the existing
    interface to achieve this in a backwards compatible way.  From
    Andrey Vagin.

 4) A fix for FCOE scatter gather feature validation erroneously caused
    scatter gather to be disabled for things like AOE too.  From Ed L
    Cashin.

 5) Several cases of mishandling of error pointers, from Mathias Krause,
    Wei Yongjun, and Devendra Naga.

 6) Fix gianfar build, from Richard Cochran.

 7) CAP_NET_* failures should return -EPERM not -EACCES, from Zhao
    Hongjiang.

 8) Hardware reset fix in janz-ican3 CAN driver, from Ira W Snyder.

 9) Fix oops during rmmod in ti_hecc CAN driver, from Marc Kleine-Budde.

10) The removal of the conditional compilation of the clk support code
    in the stmmac driver broke things.  This is because the interfaces
    used are the ones that don't also perform the enable/disable of the
    clk.  Fix from Stefan Roese.

11) The QFQ packet scheduler can record out of range virtual start
    times, resulting later in misbehavior and even crashes.  Fix from
    Paolo Valente.

12) If MSG_WAITALL is used with IOAT DMA under TCP, we can wedge the
    receiver when the advertised receive window goes to zero.  Detect
    this case and force the processing of the IOAT DMA queue when it
    happens to avoid getting stuck.  Fix from Michal Kubecek.

13) batman-adv assumes that test_bit() returns only 0 or 1, but this is
    not true for x86 (which returns -1 or 0, via the 'sbb' instruction).
    Fix from Linus Lussing.

14) Fix small packet corruption in e1000, from Tushar Dave.

15) make_blackhole() in the IPSEC policy code can do one read unlock too
    many, fix from Li RongQing.

16) The new tcp_try_coalesce() code introduced a bug in TCP URG
    handling, fix from Eric Dumazet.

17) Fix memory leak in __netif_receive_skb() when doing zerocopy and
    when hit an OOM condition.  From Michael S Tsirkin.

18) netxen blindly deferences pdev->bus->self, which is not guarenteed
    to be non-NULL.  Fix from Nikolay Aleksandrov.

19) Fix a performance regression caused by mistakes in ipv6 checksum
    validation in the bnx2x driver, fix from Michal Schmidt.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (45 commits)
  net/stmmac: Use clk_prepare_enable and clk_disable_unprepare
  net: change return values from -EACCES to -EPERM
  net/irda: sh_sir: fix return value check in sh_sir_set_baudrate()
  stmmac: fix return value check in stmmac_open_ext_timer()
  gianfar: fix phc index build failure
  ipv6: fix return value check in fib6_add()
  bnx2x: remove false warning regarding interrupt number
  can: ti_hecc: fix oops during rmmod
  can: janz-ican3: fix support for older hardware revisions
  net: do not disable sg for packets requiring no checksum
  aoe: assert AoE packets marked as requiring no checksum
  at91ether: return PTR_ERR if call to clk_get fails
  xfrm_user: don't copy esn replay window twice for new states
  xfrm_user: ensure user supplied esn replay window is valid
  xfrm_user: fix info leak in copy_to_user_tmpl()
  xfrm_user: fix info leak in copy_to_user_policy()
  xfrm_user: fix info leak in copy_to_user_state()
  xfrm_user: fix info leak in copy_to_user_auth()
  net: qmi_wwan: adding Huawei E367, ZTE MF683 and Pantech P4200
  tcp: restore rcv_wscale in a repair mode (v2)
  ...

Pull sparc updates from David Miller:

1) Debugging builds on 32-bit sparc need to handle the R_SPARC_DISP32
   relocation, not just 64-bit sparc.  From Andreas Larsson.

2) Wei Yongjun noticed that module_alloc() on sparc can return an
   error pointer, but that's not allowed.  module_alloc() should
   return only a valid pointer, or NULL.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc: fix the return value of module_alloc()
  sparc32: Enable the relocation target R_SPARC_DISP32 for sparc32

Pull x86 fixes from Ingo Molnar:
 "Small fixlets"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm/init.c: Fix devmem_is_allowed() off by one
  x86/kconfig: Remove outdated reference to Intel CPUs in CONFIG_SWIOTLB

Pull timer fix from Ingo Molnar:
 "One more timekeeping fix for v3.6"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  time: Fix timeekeping_get_ns overflow on 32bit systems

Pull perf fixes from Ingo Molnar:
 "Small perf fixlets"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tracing: Don't call page_to_pfn() if page is NULL
  perf/x86: Fix Intel Ivy Bridge support
  perf/x86/ibs: Check syscall attribute flags
  perf/x86: Export Sandy Bridge uncore clockticks event in sysfs

Pull xfs bugfixes from Ben Myers:
 - fix a regression related to xfs_sync_worker racing with unmount.
 - fix a race while discarding xfs buffers.

* tag 'for-linus-v3.6-rc7' of git://oss.sgi.com/xfs/xfs:
  xfs: stop the sync worker before xfs_unmountfs
  xfs: fix race while discarding buffers [V4]

Pull drm fixes from Dave Airlie:
 "Fixes for big 3 drivers:

  nouveau: revert earlier MBP fix, put a dmi based MBP fix in its place
  (fixes a regression we found on some Dell eDP panels doing some
  internal testing)

  radeon: revert pll fixes, real fix is too invasive, fix scratch leak

  intel: 3 minor fixes, one for HDMI audio."

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/nouveau: add dmi quirk for gpio reset
  drm/radeon: Prevent leak of scratch register on resume from suspend
  Revert "drm/nv50-/gpio: initialise to vbios defaults during init"
  Revert "drm/radeon: rework pll selection (v3)"
  drm/i915: HDMI - Clear Audio Enable bit for Hot Plug
  drm/i915: Reduce a pin-leak BUG into a WARN
  drm/i915: enable lvds pin pairs before dpll on gen2

Pull input updates from Dmitry Torokhov:
 "Updates for the input subsystem.  Just a few driver updates mostly
  dealing with recent regressions."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: edt-ft5x06 - return -EFAULT on copy_to_user() error
  Input: sentelic - filter out erratic movement when lifting finger
  Input: ambakmi - [un]prepare clocks when enabling amd disabling
  Input: i8042 - disable mux on Toshiba C850D
  Revert "input: ab8500-ponkey: Create AB8500 domain IRQ mapping"
  Input: imx_keypad - fix missing clk conversions
  Input: usbtouchscreen - initialize eGalax devices

Pull watchdog fixes from Wim Van Sebroeck:
 "Fix a kdump issue in hpwdt and a possible NULL dereference."

* git://www.linux-watchdog.org/linux-watchdog:
  watchdog: move the dereference below the NULL test
  hpwdt: Fix kdump issue in hpwdt

Pull hwmon fixes from Guenter Roeck:
 - Add missing 'name' sysfs attributes to ad7314 and ads7871 drivers
 - Bump maximum wait time for applesmc driver (again)
 - Fix build warning seen with W=1 in include/linux/kernel.h, introduced
   with commit b6d86d3d ("Fix DIV_ROUND_CLOSEST to support negative
   dividends")

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  linux/kernel.h: Fix warning seen with W=1 due to change in DIV_ROUND_CLOSEST
  hwmon: (applesmc) Bump max wait
  hwmon: (ad7314) Add 'name' sysfs attribute
  hwmon: (ads7871) Add 'name' sysfs attribute

Pull slave-dmaengine fixes from Vinod Koul:
 "There are two trivial fixes in pl330 driver and two in at_hdmac
  driver."

* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
  DMA: PL330: Check the pointer returned by kzalloc
  DMA: PL330: Fix potential NULL pointer dereference in pl330_submit_req()
  dmaengine: at_hdmac: check that each sg data length is non-null
  dmaengine: at_hdmac: fix comment in atc_prep_slave_sg()

Pull arm-soc bug fixes from Olof Johansson:
 "A couple of samsung clock locking fixes, at91 device tree gpio
  configuration fix and a couple more for shmobile and i.MX.

  All small targeted fixes."

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM i.MX25: Make timer irq work again
  ARM: imx: armadillo5x0: Fix illegal register access
  ARM: shmobile: kzm9g: bugfix: correct mmcif interrupt settings
  ARM: SAMSUNG: Use spin_lock_{irqsave,irqrestore} in clk_set_rate
  ARM: at91: fix missing #interrupt-cells on gpio-controller
  ARM: SAMSUNG: use spin_lock_irqsave() in clk_set_parent

In case of error, function module_alloc() in other platform never
returns ERR_PTR(), and all of the user only check for NULL, so
we'd better return NULL instead of ERR_PTR().

dpatch engine is used to auto generated this patch.
(https://github.com/weiyj/dpatch)
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

GNU Binutils 2.20.1 generates .eh_frame sections that uses R_SPARC_DISP32.
Signed-off-by: NAndreas Larsson <andreas@gaisler.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull s390 fixes from Martin Schwidefsky:
 "Bug fixes for 3.6-rc7, including some important patches for large page
  related memory management issues."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/dasd: fix read unit address configuration loop
  s390/dasd: fix pathgroup race
  s390/mm: fix user access page-table walk code
  s390/hwcaps: do not report high gprs for 31 bit kernel
  s390/cio: invalidate cdev pointer before deregistration
  s390/cio: fix IO subchannel event race
  s390/dasd: move wake_up call
  s390/hugetlb: use direct TLB flushing for hugetlbfs pages
  s390/mm: fix deadlock in unmap_hugepage_range()

Merge tag 'stable/for-linus-3.6-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen

Pull Xen bug-fixes from Konrad Rzeszutek Wilk:
 - Fix M2P batching re-using the incorrect structure field.

   In v3.5 we added batching for M2P override (Machine Frame Number ->
   Physical Frame Number), but the original MFN was saved in an
   incorrect structure - and we would oops/restore when restoring with
   the old MFN.

 - Disable BIOS SMP MP table search.

   A bootup issue that we had ignored until we found that on DL380 G6 it
   was needed.

* tag 'stable/for-linus-3.6-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/boot: Disable BIOS SMP MP table search.
  xen/m2p: do not reuse kmap_op->dev_bus_addr

This patch fixes an issue introduced by commit ID 6a81c26f
[net/stmmac: remove conditional compilation of clk code], which
switched from the internal stmmac_clk_{en}{dis}able calls to
clk_{en}{dis}able. By this, calling clk_prepare and clk_unprepare
was removed.

clk_{un}prepare is mandatory for platforms using common clock framework.
Since these drivers are used by SPEAr platform, which supports common
clock framework, add clk_{un}prepare() support for them. Otherwise
the clocks are not correctly en-/disabled and ethernet support doesn't
work.
Signed-off-by: NStefan Roese <sr@denx.de>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Reviewed-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The format_array_alloc() function is fundamentally racy, in that it
prints the array twice: once to figure out how much space to allocate
for the buffer, and the second time to actually print out the data.

If any of the array contents changes in between, the allocation size may
be wrong, and the end result may be truncated in odd ways.

Just don't do it.  Allocate a maximum-sized array up-front, and just
format the array contents once.  The only user of the u32_array
interfaces is the Xen spinlock statistics code, and it has 31 entries in
the arrays, so the maximum size really isn't that big, and the end
result is much simpler code without the bug.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Change return value from -EACCES to -EPERM when the permission check fails.
Signed-off-by: NZhao Hongjiang <zhaohongjiang@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Marc Kleine-Budde says:

====================
two patches for the v3.6 release cycle. Ira W. Snyder fixed support for the
older version of the Janz CMOD-IO Carrier Board. I found and fixed an oops in
the ti_hecc driver, which occurs when removing the module if the network
interface is still open.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In case of error, the function clk_get() returns ERR_PTR()
and never returns NULL pointer. The NULL test in the error
handling should be replaced with IS_ERR().

dpatch engine is used to auto generated this patch.
(https://github.com/weiyj/dpatch)
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In case of error, the function clk_get() returns ERR_PTR()
and never returns NULL pointer. The NULL test in the error
handling should be replaced with IS_ERR().

dpatch engine is used to auto generated this patch.
(https://github.com/weiyj/dpatch)
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes a build failure introduced in commit 66636287
("gianfar: Support the get_ts_info ethtool method."). Not only was a
global variable inconsistently named, but also it was not exported as
it should have been.

This fix is also needed in stable version 3.5.
Signed-off-by: NRichard Cochran <richardcochran@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In case of error, the function fib6_add_1() returns ERR_PTR()
or NULL pointer. The ERR_PTR() case check is missing in fib6_add().

dpatch engine is used to generated this patch.
(https://github.com/weiyj/dpatch)
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

u32_array_open() is racy when multiple threads read from a file with a
seek position of zero, i.e. when two or more simultaneous reads are
occurring after the non-seekable files are created.  It is possible that
file->private_data is double-freed because the threads races between

	kfree(file->private-data);

and

	file->private_data = NULL;

The fix is to only do format_array_alloc() when the file is opened and
free it when it is closed.

Note that because the file has always been non-seekable, you can't open
it and read it multiple times anyway, so the data has always been
generated just once.  The difference is that now it is generated at open
time rather than at the time of the first read, and that avoids the
race.
Reported-by: NDave Jones <davej@redhat.com>
Acked-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: NRaghavendra <raghavendra.kt@linux.vnet.ibm.com>
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since version 7.4 the FW configures in the pci config space the max
number of interrupts available to the physical function, instead of
the exact number to use.
This causes a false warning in driver when comparing the number of
configured interrupts to the number about to be used.
Signed-off-by: NAriel Elior <ariele@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes an oops which occurs when unloading the driver, while the
network interface is still up. The problem is that first the io mapping is
teared own, then the CAN device is unregistered, resulting in accessing the
hardware's iomem:

[  172.744232] Unable to handle kernel paging request at virtual address c88b0040
[  172.752441] pgd = c7be4000
[  172.755645] [c88b0040] *pgd=87821811, *pte=00000000, *ppte=00000000
[  172.762207] Internal error: Oops: 807 [#1] PREEMPT ARM
[  172.767517] Modules linked in: ti_hecc(-) can_dev
[  172.772430] CPU: 0    Not tainted  (3.5.0alpha-00037-g3554cc0 #126)
[  172.778961] PC is at ti_hecc_close+0xb0/0x100 [ti_hecc]
[  172.784423] LR is at __dev_close_many+0x90/0xc0
[  172.789123] pc : [<bf00c768>]    lr : [<c033be58>]    psr: 60000013
[  172.789123] sp : c5c1de68  ip : 00040081  fp : 00000000
[  172.801025] r10: 00000001  r9 : c5c1c000  r8 : 00100100
[  172.806457] r7 : c5d0a48c  r6 : c5d0a400  r5 : 00000000  r4 : c5d0a000
[  172.813232] r3 : c88b0000  r2 : 00000001  r1 : c5d0a000  r0 : c5d0a000
[  172.820037] Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
[  172.827423] Control: 10c5387d  Table: 87be4019  DAC: 00000015
[  172.833404] Process rmmod (pid: 600, stack limit = 0xc5c1c2f0)
[  172.839447] Stack: (0xc5c1de68 to 0xc5c1e000)
[  172.843994] de60:                   bf00c6b8 c5c1dec8 c5d0a000 c5d0a000 00200200 c033be58
[  172.852478] de80: c5c1de44 c5c1dec8 c5c1dec8 c033bf2c c5c1de90 c5c1de90 c5d0a084 c5c1de44
[  172.860992] dea0: c5c1dec8 c033c098 c061d3dc c5d0a000 00000000 c05edf28 c05edb34 c000d724
[  172.869476] dec0: 00000000 c033c2f8 c5d0a084 c5d0a084 00000000 c033c370 00000000 c5d0a000
[  172.877990] dee0: c05edb00 c033c3b8 c5d0a000 bf00d3ac c05edb00 bf00d7c8 bf00d7c8 c02842dc
[  172.886474] df00: c02842c8 c0282f90 c5c1c000 c05edb00 bf00d7c8 c0283668 bf00d7c8 00000000
[  172.894989] df20: c0611f98 befe2f80 c000d724 c0282d10 bf00d804 00000000 00000013 c0068a8c
[  172.903472] df40: c5c538e8 685f6974 00636365 c61571a8 c5cb9980 c61571a8 c6158a20 c00c9bc4
[  172.911987] df60: 00000000 00000000 c5cb9980 00000000 c5cb9980 00000000 c7823680 00000006
[  172.920471] df80: bf00d804 00000880 c5c1df8c 00000000 000d4267 befe2f80 00000001 b6d90068
[  172.928985] dfa0: 00000081 c000d5a0 befe2f80 00000001 befe2f80 00000880 b6d90008 00000008
[  172.937469] dfc0: befe2f80 00000001 b6d90068 00000081 00000001 00000000 befe2eac 00000000
[  172.945983] dfe0: 00000000 befe2b18 00023ba4 b6e6addc 60000010 befe2f80 a8e00190 86d2d344
[  172.954498] [<bf00c768>] (ti_hecc_close+0xb0/0x100 [ti_hecc]) from [<c033be58>] (__dev__registered_many+0xc0/0x2a0)
[  172.984161] [<c033c098>] (rollback_registered_many+0xc0/0x2a0) from [<c033c2f8>] (rollback_registered+0x20/0x30)
[  172.994750] [<c033c2f8>] (rollback_registered+0x20/0x30) from [<c033c370>] (unregister_netdevice_queue+0x68/0x98)
[  173.005401] [<c033c370>] (unregister_netdevice_queue+0x68/0x98) from [<c033c3b8>] (unregister_netdev+0x18/0x20)
[  173.015899] [<c033c3b8>] (unregister_netdev+0x18/0x20) from [<bf00d3ac>] (ti_hecc_remove+0x60/0x80 [ti_hecc])
[  173.026245] [<bf00d3ac>] (ti_hecc_remove+0x60/0x80 [ti_hecc]) from [<c02842dc>] (platform_drv_remove+0x14/0x18)
[  173.036712] [<c02842dc>] (platform_drv_remove+0x14/0x18) from [<c0282f90>] (__device_release_driver+0x7c/0xbc)

Cc: stable <stable@vger.kernel.org>
Cc: Anant Gole <anantgole@ti.com>
Tested-by: NJan Luebbe <jlu@pengutronix.de>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

The Revision 1.0 Janz CMOD-IO Carrier Board does not have support for
the reset registers. To support older hardware, the code is changed to
use the hardware reset register on the Janz VMOD-ICAN3 hardware itself.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: NIra W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

Daniel writes:
Essentially just flush my -fixes queue before I head off to xdc.
- gen2 regression fixer, we've enabled the lvds stuff too late. Not
  causing any known issues, but this restores the sequence before a
  refactor that landed in 3.5, and lvds is a fickle beast. And seriously,
  who runs gen2 still ...
- downgrade a BUG to a WARN - we haven't root-caused/fixed the underlying
  issue yet, but this should help bug reporters quite a bit.
- properly disable hdmi audio - we've lost track of this, which resulted
  in the alsa driver again losing track of the unplug event.

* 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel:
  drm/i915: HDMI - Clear Audio Enable bit for Hot Plug
  drm/i915: Reduce a pin-leak BUG into a WARN
  drm/i915: enable lvds pin pairs before dpll on gen2

This fixes the gpio reset problem so the Retina MBP works, but avoids
breaking the Dell systems. Ben will work on a better solution for 3.7.

Tested by me on retina MBP.
Signed-off-by: NDave Airlie <airlied@redhat.com>

A change in a series of VLAN-related changes appears to have
inadvertently disabled the use of the scatter gather feature of
network cards for transmission of non-IP ethernet protocols like ATA
over Ethernet (AoE).  Below is a reference to the commit that
introduces a "harmonize_features" function that turns off scatter
gather when the NIC does not support hardware checksumming for the
ethernet protocol of an sk buff.

  commit f01a5236
  Author: Jesse Gross <jesse@nicira.com>
  Date:   Sun Jan 9 06:23:31 2011 +0000

      net offloading: Generalize netif_get_vlan_features().

The can_checksum_protocol function is not equipped to consider a
protocol that does not require checksumming.  Calling it for a
protocol that requires no checksum is inappropriate.

The patch below has harmonize_features call can_checksum_protocol when
the protocol needs a checksum, so that the network layer is not forced
to perform unnecessary skb linearization on the transmission of AoE
packets.  Unnecessary linearization results in decreased performance
and increased memory pressure, as reported here:

  http://www.spinics.net/lists/linux-mm/msg15184.html

The problem has probably not been widely experienced yet, because
only recently has the kernel.org-distributed aoe driver acquired the
ability to use payloads of over a page in size, with the patchset
recently included in the mm tree:

  https://lkml.org/lkml/2012/8/28/140

The coraid.com-distributed aoe driver already could use payloads of
greater than a page in size, but its users generally do not use the
newest kernels.
Signed-off-by: NEd Cashin <ecashin@coraid.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In order for the network layer to see that AoE requires
no checksumming in a generic way, the packets must be
marked as requiring no checksum, so we make this requirement
explicit with the assertion.
Signed-off-by: NEd Cashin <ecashin@coraid.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

we are currently returning ENODEV, as the clk_get may give a exact
error code in its returned pointer, assign it to the ret by using the
PTR_ERR function, so that the subsequent goto label will jump to the
error path and clean the driver and return the error correctly.
Signed-off-by: NDevendra Naga <devendra.aaru@gmail.com>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>