提交 36a21fe6 编写于 作者: L Linus Torvalds

Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux

Pull drm fixes from Dave Airlie:
 "Fixes for big 3 drivers:

  nouveau: revert earlier MBP fix, put a dmi based MBP fix in its place
  (fixes a regression we found on some Dell eDP panels doing some
  internal testing)

  radeon: revert pll fixes, real fix is too invasive, fix scratch leak

  intel: 3 minor fixes, one for HDMI audio."

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/nouveau: add dmi quirk for gpio reset
  drm/radeon: Prevent leak of scratch register on resume from suspend
  Revert "drm/nv50-/gpio: initialise to vbios defaults during init"
  Revert "drm/radeon: rework pll selection (v3)"
  drm/i915: HDMI - Clear Audio Enable bit for Hot Plug
  drm/i915: Reduce a pin-leak BUG into a WARN
  drm/i915: enable lvds pin pairs before dpll on gen2
......@@ -3242,7 +3242,8 @@ i915_gem_object_pin(struct drm_i915_gem_object *obj,
{
int ret;
BUG_ON(obj->pin_count == DRM_I915_GEM_OBJECT_MAX_PIN_COUNT);
if (WARN_ON(obj->pin_count == DRM_I915_GEM_OBJECT_MAX_PIN_COUNT))
return -EBUSY;
if (obj->gtt_space != NULL) {
if ((alignment && obj->gtt_offset & (alignment - 1)) ||
......
......@@ -4191,12 +4191,6 @@ static void i8xx_update_pll(struct drm_crtc *crtc,
POSTING_READ(DPLL(pipe));
udelay(150);
I915_WRITE(DPLL(pipe), dpll);
/* Wait for the clocks to stabilize. */
POSTING_READ(DPLL(pipe));
udelay(150);
/* The LVDS pin pair needs to be on before the DPLLs are enabled.
* This is an exception to the general rule that mode_set doesn't turn
* things on.
......@@ -4204,6 +4198,12 @@ static void i8xx_update_pll(struct drm_crtc *crtc,
if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
intel_update_lvds(crtc, clock, adjusted_mode);
I915_WRITE(DPLL(pipe), dpll);
/* Wait for the clocks to stabilize. */
POSTING_READ(DPLL(pipe));
udelay(150);
/* The pixel multiplier can only be updated once the
* DPLL is enabled and the clocks are stable.
*
......
......@@ -609,7 +609,7 @@ static void intel_hdmi_dpms(struct drm_encoder *encoder, int mode)
u32 temp;
u32 enable_bits = SDVO_ENABLE;
if (intel_hdmi->has_audio)
if (intel_hdmi->has_audio || mode != DRM_MODE_DPMS_ON)
enable_bits |= SDVO_AUDIO_ENABLE;
temp = I915_READ(intel_hdmi->sdvox_reg);
......
......@@ -22,6 +22,7 @@
* Authors: Ben Skeggs
*/
#include <linux/dmi.h>
#include "drmP.h"
#include "nouveau_drv.h"
#include "nouveau_hw.h"
......@@ -110,13 +111,25 @@ nv50_gpio_isr(struct drm_device *dev)
nv_wr32(dev, 0xe074, intr1);
}
static struct dmi_system_id gpio_reset_ids[] = {
{
.ident = "Apple Macbook 10,1",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro10,1"),
}
},
{ }
};
int
nv50_gpio_init(struct drm_device *dev)
{
struct drm_nouveau_private *dev_priv = dev->dev_private;
/* initialise gpios and routing to vbios defaults */
nouveau_gpio_reset(dev);
if (dmi_check_system(gpio_reset_ids))
nouveau_gpio_reset(dev);
/* disable, and ack any pending gpio interrupts */
nv_wr32(dev, 0xe050, 0x00000000);
......
......@@ -1479,98 +1479,14 @@ static void radeon_legacy_atom_fixup(struct drm_crtc *crtc)
}
}
/**
* radeon_get_pll_use_mask - look up a mask of which pplls are in use
*
* @crtc: drm crtc
*
* Returns the mask of which PPLLs (Pixel PLLs) are in use.
*/
static u32 radeon_get_pll_use_mask(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
struct drm_crtc *test_crtc;
struct radeon_crtc *radeon_test_crtc;
u32 pll_in_use = 0;
list_for_each_entry(test_crtc, &dev->mode_config.crtc_list, head) {
if (crtc == test_crtc)
continue;
radeon_test_crtc = to_radeon_crtc(test_crtc);
if (radeon_test_crtc->pll_id != ATOM_PPLL_INVALID)
pll_in_use |= (1 << radeon_test_crtc->pll_id);
}
return pll_in_use;
}
/**
* radeon_get_shared_dp_ppll - return the PPLL used by another crtc for DP
*
* @crtc: drm crtc
*
* Returns the PPLL (Pixel PLL) used by another crtc/encoder which is
* also in DP mode. For DP, a single PPLL can be used for all DP
* crtcs/encoders.
*/
static int radeon_get_shared_dp_ppll(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
struct drm_encoder *test_encoder;
struct radeon_crtc *radeon_test_crtc;
list_for_each_entry(test_encoder, &dev->mode_config.encoder_list, head) {
if (test_encoder->crtc && (test_encoder->crtc != crtc)) {
if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(test_encoder))) {
/* for DP use the same PLL for all */
radeon_test_crtc = to_radeon_crtc(test_encoder->crtc);
if (radeon_test_crtc->pll_id != ATOM_PPLL_INVALID)
return radeon_test_crtc->pll_id;
}
}
}
return ATOM_PPLL_INVALID;
}
/**
* radeon_atom_pick_pll - Allocate a PPLL for use by the crtc.
*
* @crtc: drm crtc
*
* Returns the PPLL (Pixel PLL) to be used by the crtc. For DP monitors
* a single PPLL can be used for all DP crtcs/encoders. For non-DP
* monitors a dedicated PPLL must be used. If a particular board has
* an external DP PLL, return ATOM_PPLL_INVALID to skip PLL programming
* as there is no need to program the PLL itself. If we are not able to
* allocate a PLL, return ATOM_PPLL_INVALID to skip PLL programming to
* avoid messing up an existing monitor.
*
* Asic specific PLL information
*
* DCE 6.1
* - PPLL2 is only available to UNIPHYA (both DP and non-DP)
* - PPLL0, PPLL1 are available for UNIPHYB/C/D/E/F (both DP and non-DP)
*
* DCE 6.0
* - PPLL0 is available to all UNIPHY (DP only)
* - PPLL1, PPLL2 are available for all UNIPHY (both DP and non-DP) and DAC
*
* DCE 5.0
* - DCPLL is available to all UNIPHY (DP only)
* - PPLL1, PPLL2 are available for all UNIPHY (both DP and non-DP) and DAC
*
* DCE 3.0/4.0/4.1
* - PPLL1, PPLL2 are available for all UNIPHY (both DP and non-DP) and DAC
*
*/
static int radeon_atom_pick_pll(struct drm_crtc *crtc)
{
struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
struct drm_device *dev = crtc->dev;
struct radeon_device *rdev = dev->dev_private;
struct drm_encoder *test_encoder;
u32 pll_in_use;
int pll;
struct drm_crtc *test_crtc;
uint32_t pll_in_use = 0;
if (ASIC_IS_DCE61(rdev)) {
list_for_each_entry(test_encoder, &dev->mode_config.encoder_list, head) {
......@@ -1582,40 +1498,32 @@ static int radeon_atom_pick_pll(struct drm_crtc *crtc)
if ((test_radeon_encoder->encoder_id ==
ENCODER_OBJECT_ID_INTERNAL_UNIPHY) &&
(dig->linkb == false))
/* UNIPHY A uses PPLL2 */
(dig->linkb == false)) /* UNIPHY A uses PPLL2 */
return ATOM_PPLL2;
else if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(test_encoder))) {
/* UNIPHY B/C/D/E/F */
if (rdev->clock.dp_extclk)
/* skip PPLL programming if using ext clock */
return ATOM_PPLL_INVALID;
else {
/* use the same PPLL for all DP monitors */
pll = radeon_get_shared_dp_ppll(crtc);
if (pll != ATOM_PPLL_INVALID)
return pll;
}
}
break;
}
}
/* UNIPHY B/C/D/E/F */
pll_in_use = radeon_get_pll_use_mask(crtc);
if (!(pll_in_use & (1 << ATOM_PPLL0)))
list_for_each_entry(test_crtc, &dev->mode_config.crtc_list, head) {
struct radeon_crtc *radeon_test_crtc;
if (crtc == test_crtc)
continue;
radeon_test_crtc = to_radeon_crtc(test_crtc);
if ((radeon_test_crtc->pll_id == ATOM_PPLL0) ||
(radeon_test_crtc->pll_id == ATOM_PPLL1))
pll_in_use |= (1 << radeon_test_crtc->pll_id);
}
if (!(pll_in_use & 4))
return ATOM_PPLL0;
if (!(pll_in_use & (1 << ATOM_PPLL1)))
return ATOM_PPLL1;
DRM_ERROR("unable to allocate a PPLL\n");
return ATOM_PPLL_INVALID;
return ATOM_PPLL1;
} else if (ASIC_IS_DCE4(rdev)) {
list_for_each_entry(test_encoder, &dev->mode_config.encoder_list, head) {
if (test_encoder->crtc && (test_encoder->crtc == crtc)) {
/* in DP mode, the DP ref clock can come from PPLL, DCPLL, or ext clock,
* depending on the asic:
* DCE4: PPLL or ext clock
* DCE5: PPLL, DCPLL, or ext clock
* DCE6: PPLL, PPLL0, or ext clock
* DCE5: DCPLL or ext clock
*
* Setting ATOM_PPLL_INVALID will cause SetPixelClock to skip
* PPLL/DCPLL programming and only program the DP DTO for the
......@@ -1623,34 +1531,31 @@ static int radeon_atom_pick_pll(struct drm_crtc *crtc)
*/
if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(test_encoder))) {
if (rdev->clock.dp_extclk)
/* skip PPLL programming if using ext clock */
return ATOM_PPLL_INVALID;
else if (ASIC_IS_DCE6(rdev))
/* use PPLL0 for all DP */
return ATOM_PPLL0;
else if (ASIC_IS_DCE5(rdev))
/* use DCPLL for all DP */
return ATOM_DCPLL;
else {
/* use the same PPLL for all DP monitors */
pll = radeon_get_shared_dp_ppll(crtc);
if (pll != ATOM_PPLL_INVALID)
return pll;
}
}
break;
}
}
/* all other cases */
pll_in_use = radeon_get_pll_use_mask(crtc);
if (!(pll_in_use & (1 << ATOM_PPLL2)))
return ATOM_PPLL2;
if (!(pll_in_use & (1 << ATOM_PPLL1)))
/* otherwise, pick one of the plls */
list_for_each_entry(test_crtc, &dev->mode_config.crtc_list, head) {
struct radeon_crtc *radeon_test_crtc;
if (crtc == test_crtc)
continue;
radeon_test_crtc = to_radeon_crtc(test_crtc);
if ((radeon_test_crtc->pll_id >= ATOM_PPLL1) &&
(radeon_test_crtc->pll_id <= ATOM_PPLL2))
pll_in_use |= (1 << radeon_test_crtc->pll_id);
}
if (!(pll_in_use & 1))
return ATOM_PPLL1;
DRM_ERROR("unable to allocate a PPLL\n");
return ATOM_PPLL_INVALID;
return ATOM_PPLL2;
} else
/* use PPLL1 or PPLL2 */
return radeon_crtc->crtc_id;
}
......@@ -1792,7 +1697,7 @@ static void atombios_crtc_disable(struct drm_crtc *crtc)
break;
}
done:
radeon_crtc->pll_id = ATOM_PPLL_INVALID;
radeon_crtc->pll_id = -1;
}
static const struct drm_crtc_helper_funcs atombios_helper_funcs = {
......@@ -1841,6 +1746,6 @@ void radeon_atombios_init_crtc(struct drm_device *dev,
else
radeon_crtc->crtc_offset = 0;
}
radeon_crtc->pll_id = ATOM_PPLL_INVALID;
radeon_crtc->pll_id = -1;
drm_crtc_helper_add(&radeon_crtc->base, &atombios_helper_funcs);
}
......@@ -1182,7 +1182,8 @@ int r100_cp_init(struct radeon_device *rdev, unsigned ring_size)
ring->ready = true;
radeon_ttm_set_active_vram_size(rdev, rdev->mc.real_vram_size);
if (radeon_ring_supports_scratch_reg(rdev, ring)) {
if (!ring->rptr_save_reg /* not resuming from suspend */
&& radeon_ring_supports_scratch_reg(rdev, ring)) {
r = radeon_scratch_get(rdev, &ring->rptr_save_reg);
if (r) {
DRM_ERROR("failed to get scratch reg for rptr save (%d).\n", r);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册