Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 04 12月, 2014 1 次提交
    • B
      tracing: Add additional marks to signal very large time deltas · 8e1e1df2
      由 Byungchul Park 提交于 
      Currently, function graph tracer prints "!" or "+" just before
function execution time to signal a function overhead, depending
on the time. And some tracers tracing latency also print "!" or
"+" just after time to signal overhead, depending on the interval
between events. Even it is usually enough to do that, we sometimes
need to signal for bigger execution time than 100 micro seconds.

For example, I used function graph tracer to detect if there is
any case that exit_mm() takes too much time. I did following steps
in /sys/kernel/debug/tracing. It was easier to detect very large
excution time with patched kernel than with original kernel.

$ echo exit_mm > set_graph_function
$ echo function_graph > current_tracer
$ echo > trace
$ cat trace_pipe > $LOGFILE
 ... (do something and terminate logging)
$ grep "\\$" $LOGFILE
 3) $ 22082032 us |                      } /* kernel_map_pages */
 3) $ 22082040 us |                    } /* free_pages_prepare */
 3) $ 22082113 us |                  } /* free_hot_cold_page */
 3) $ 22083455 us |                } /* free_hot_cold_page_list */
 3) $ 22083895 us |              } /* release_pages */
 3) $ 22177873 us |            } /* free_pages_and_swap_cache */
 3) $ 22178929 us |          } /* unmap_single_vma */
 3) $ 22198885 us |        } /* unmap_vmas */
 3) $ 22206949 us |      } /* exit_mmap */
 3) $ 22207659 us |    } /* mmput */
 3) $ 22207793 us |  } /* exit_mm */

And then, it was easy to find out that a schedule-out occured by
sub_preempt_count() within kernel_map_pages().

To detect very large function exection time caused by either problematic
function implementation or scheduling issues, this patch can be useful.

Link: http://lkml.kernel.org/r/1416789259-24038-1-git-send-email-byungchul.park@lge.comSigned-off-by: NByungchul Park <byungchul.park@lge.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      8e1e1df2
  3. 22 11月, 2014 1 次提交
    • M
      ftrace, kprobes: Support IPMODIFY flag to find IP modify conflict · f8b8be8a
      由 Masami Hiramatsu 提交于 
      Introduce FTRACE_OPS_FL_IPMODIFY to avoid conflict among
ftrace users who may modify regs->ip to change the execution
path. If two or more users modify the regs->ip on the same
function entry, one of them will be broken. So they must add
IPMODIFY flag and make sure that ftrace_set_filter_ip() succeeds.

Note that ftrace doesn't allow ftrace_ops which has IPMODIFY
flag to have notrace hash, and the ftrace_ops must have a
filter hash (so that the ftrace_ops can hook only specific
entries), because it strongly depends on the address and
must be allowed for only few selected functions.

Link: http://lkml.kernel.org/r/20141121102516.11844.27829.stgit@localhost.localdomain

Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Petr Mladek <pmladek@suse.cz>
Cc: Vojtech Pavlik <vojtech@suse.cz>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
[ fixed up some of the comments ]
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      f8b8be8a
  5. 16 7月, 2014 1 次提交
    • K
      sched: Transform resched_task() into resched_curr() · 8875125e
      由 Kirill Tkhai 提交于 
      We always use resched_task() with rq->curr argument.
It's not possible to reschedule any task but rq's current.

The patch introduces resched_curr(struct rq *) to
replace all of the repeating patterns. The main aim
is cleanup, but there is a little size profit too:

  (before)
	$ size kernel/sched/built-in.o
	   text	   data	    bss	    dec	    hex	filename
	155274	  16445	   7042	 178761	  2ba49	kernel/sched/built-in.o

	$ size vmlinux
	   text	   data	    bss	    dec	    hex	filename
	7411490	1178376	 991232	9581098	 92322a	vmlinux

  (after)
	$ size kernel/sched/built-in.o
	   text	   data	    bss	    dec	    hex	filename
	155130	  16445	   7042	 178617	  2b9b9	kernel/sched/built-in.o

	$ size vmlinux
	   text	   data	    bss	    dec	    hex	filename
	7411362	1178376	 991232	9580970	 9231aa	vmlinux

	I was choosing between resched_curr() and resched_rq(),
	and the first name looks better for me.

A little lie in Documentation/trace/ftrace.txt. I have not
actually collected the tracing again. With a hope the patch
won't make execution times much worse :)
Signed-off-by: NKirill Tkhai <tkhai@yandex.ru>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20140628200219.1778.18735.stgit@localhostSigned-off-by: NIngo Molnar <mingo@kernel.org>
      8875125e
  7. 21 5月, 2014 1 次提交
  9. 11 11月, 2013 1 次提交
  11. 20 8月, 2013 1 次提交
  13. 12 6月, 2013 2 次提交
    • S
      tracing: Add function probe to trigger a ftrace dump of current CPU trace · 90e3c03c
      由 Steven Rostedt (Red Hat) 提交于 
      Add the "cpudump" command to have the current CPU ftrace buffer dumped
to console if a function is hit. This is useful when debugging a
tripple fault, where you have an idea of a function that is called
just before the tripple fault occurs, and can tell ftrace to dump its
content out to the console before it continues.

This differs from the "dump" command as it only dumps the content of
the ring buffer for the currently executing CPU, and does not show
the contents of the other CPUs.

Format is:

  <function>:cpudump

echo 'bad_address:cpudump' > /debug/tracing/set_ftrace_filter

To remove this:

echo '!bad_address:cpudump' > /debug/tracing/set_ftrace_filter
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      90e3c03c
    • S
      tracing: Add function probe to trigger a ftrace dump to console · ad71d889
      由 Steven Rostedt (Red Hat) 提交于 
      Add the "dump" command to have the ftrace buffer dumped to console if
a function is hit. This is useful when debugging a tripple fault,
where you have an idea of a function that is called just before the
tripple fault occurs, and can tell ftrace to dump its content out
to the console before it continues.

Format is:

  <function>:dump

echo 'bad_address:dump' > /debug/tracing/set_ftrace_filter

To remove this:

echo '!bad_address:dump' > /debug/tracing/set_ftrace_filter
Requested-by: NLuis Claudio R. Goncalves <lclaudio@uudg.org>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      ad71d889
  15. 15 3月, 2013 1 次提交
  17. 08 3月, 2013 1 次提交
  19. 31 1月, 2013 1 次提交
  21. 13 2月, 2012 1 次提交
  23. 10 3月, 2011 1 次提交
    • D
      tracing: Add an 'overwrite' trace_option. · 750912fa
      由 David Sharp 提交于 
      Add an "overwrite" trace_option for ftrace to control whether the buffer should
be overwritten on overflow or not. The default remains to overwrite old events
when the buffer is full. This patch adds the option to instead discard newest
events when the buffer is full. This is useful to get a snapshot of traces just
after enabling traces. Dropping the current event is also a simpler code path.
Signed-off-by: NDavid Sharp <dhsharp@google.com>
LKML-Reference: <1291844807-15481-1-git-send-email-dhsharp@google.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      750912fa
  25. 09 2月, 2011 2 次提交
  27. 28 4月, 2010 1 次提交
  29. 22 4月, 2010 1 次提交
    • F
      tracing: Dump either the oops's cpu source or all cpus buffers · cecbca96
      由 Frederic Weisbecker 提交于 
      The ftrace_dump_on_oops kernel parameter, sysctl and sysrq let one
dump every cpu buffers when an oops or panic happens.

It's nice when you have few cpus but it may take ages if have many,
plus you miss the real origin of the problem in all the cpu traces.

Sometimes, all you need is to dump the cpu buffer that triggered the
opps, most of the time it is our main interest.

This patch modifies ftrace_dump_on_oops to handle this choice.

The ftrace_dump_on_oops kernel parameter, when it comes alone, has
the same behaviour than before. But ftrace_dump_on_oops=orig_cpu
will only dump the buffer of the cpu that oops'ed.

Similarly, sysctl kernel.ftrace_dump_on_oops=1 and
echo 1 > /proc/sys/kernel/ftrace_dump_on_oops keep their previous
behaviour. But setting 2 jumps into cpu origin dump mode.

v2: Fix double setup
v3: Fix spelling issues reported by Randy Dunlap
v4: Also update __ftrace_dump in the selftests
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
      cecbca96
  31. 09 2月, 2010 1 次提交
  33. 27 1月, 2010 1 次提交
  35. 24 10月, 2009 1 次提交
  37. 21 9月, 2009 1 次提交
  39. 15 9月, 2009 1 次提交
  41. 05 9月, 2009 1 次提交
  43. 16 6月, 2009 1 次提交
    • G
      debugfs: Fix terminology inconsistency of dir name to mount debugfs filesystem. · 156f5a78
      由 GeunSik Lim 提交于 
      Many developers use "/debug/" or "/debugfs/" or "/sys/kernel/debug/"
directory name to mount debugfs filesystem for ftrace according to
./Documentation/tracers/ftrace.txt file.

And, three directory names(ex:/debug/, /debugfs/, /sys/kernel/debug/) is
existed in kernel source like ftrace, DRM, Wireless, Documentation,
Network[sky2]files to mount debugfs filesystem.

debugfs means debug filesystem for debugging easy to use by greg kroah
hartman. "/sys/kernel/debug/" name is suitable as directory name
of debugfs filesystem.
- debugfs related reference: http://lwn.net/Articles/334546/

Fix inconsistency of directory name to mount debugfs filesystem.

* From Steven Rostedt
  - find_debugfs() and tracing_files() in this patch.
Signed-off-by: NGeunSik Lim <geunsik.lim@samsung.com>
Acked-by     : Inaky Perez-Gonzalez <inaky@linux.intel.com>
Reviewed-by  : Steven Rostedt <rostedt@goodmis.org>
Reviewed-by  : James Smart <james.smart@emulex.com>
CC: Jiri Kosina <trivial@kernel.org>
CC: David Airlie <airlied@linux.ie>
CC: Peter Osterlund <petero2@telia.com>
CC: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
CC: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
CC: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
      156f5a78
  45. 13 6月, 2009 1 次提交
  47. 11 6月, 2009 1 次提交
  49. 29 5月, 2009 1 次提交
  51. 09 4月, 2009 1 次提交
    • L
      tracing: consolidate documents · 66bb7488
      由 Li Zefan 提交于 
      Move kmemtrace.txt, tracepoints.txt, ftrace.txt and mmiotrace.txt to
the new trace/ directory.

I didnt find any references to those documents in both source
files and documents, so no extra work needs to be done.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Acked-by: NPekka Paalanen <pq@iki.fi>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
LKML-Reference: <49DD6E2B.6090200@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      66bb7488
  53. 08 3月, 2009 1 次提交
  55. 05 3月, 2009 1 次提交
  57. 19 2月, 2009 2 次提交
  59. 20 1月, 2009 1 次提交
  61. 28 11月, 2008 1 次提交
    • W
      ftrace: improve documentation · c072c249
      由 walimis 提交于 
      Impact: extend documentation with notice of using wild cards correctly

We know that we can use wild cards to set set_ftrace_filter, but there's
problem when using them naively such as:

   echo h* > /debug/tracing/set_ftrace_filter

If there are files named with "h" prefix in current directory,
echo "h*" will echo these filenames to set_ftrace_filter, not the
intended "h*".

For example:

  $ cat /debug/tracing/available_filter_functions |grep ^hr |wc -l
  23
  $ ls
  $ touch hraa hrdd
  $ ls
  hraa  hrdd
  $ echo hr* > /debug/tracing/set_ftrace_filter
  $ cat /debug/tracing/set_ftrace_filter

No output in /debug/tracing/set_ftrace_filter!

If we use '' to escape wild cards, it works:

  $ ls
  hraa  hrdd
  $ echo "hr*" > /debug/tracing/set_ftrace_filter
  $ cat /debug/tracing/set_ftrace_filter |wc -l
  23

This problem can lead to unexpected result if current directory has a
lot of files.
Signed-off-by: Nwalimis <walimisdev@gmail.com>
Acked-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      c072c249
  63. 26 11月, 2008 1 次提交
    • S
      ftrace: add function tracing to single thread · df4fc315
      由 Steven Rostedt 提交于 
      Impact: feature to function trace a single thread

This patch adds the ability to function trace a single thread.
The file:

  /debugfs/tracing/set_ftrace_pid

contains the pid to trace. Valid pids are any positive integer.
Writing any negative number to this file will disable the pid
tracing and the function tracer will go back to tracing all of
threads.

This feature works with both static and dynamic function tracing.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      df4fc315
  65. 23 11月, 2008 2 次提交
    • T
      tracing: identify which executable object the userspace address belongs to · b54d3de9
      由 Török Edwin 提交于 
      Impact: modify+improve the userstacktrace tracing visualization feature

Store thread group leader id, and use it to lookup the address in the
process's map. We could have looked up the address on thread's map,
but the thread might not exist by the time we are called. The process
might not exist either, but if you are reading trace_pipe, that is
unlikely.

Example usage:

 mount -t debugfs nodev /sys/kernel/debug
 cd /sys/kernel/debug/tracing
 echo userstacktrace >iter_ctrl
 echo sym-userobj >iter_ctrl
 echo sched_switch >current_tracer
 echo 1 >tracing_enabled
 cat trace_pipe >/tmp/trace&
 .... run application ...
 echo 0 >tracing_enabled
 cat /tmp/trace

You'll see stack entries like:

   /lib/libpthread-2.7.so[+0xd370]

You can convert them to function/line using:

   addr2line -fie /lib/libpthread-2.7.so 0xd370

Or:

   addr2line -fie /usr/lib/debug/libpthread-2.7.so 0xd370

For non-PIC/PIE executables this won't work:

   a.out[+0x73b]

You need to run the following: addr2line -fie a.out 0x40073b
(where 0x400000 is the default load address of a.out)
Signed-off-by: NTörök Edwin <edwintorok@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      b54d3de9
    • T
      tracing: add support for userspace stacktraces in tracing/iter_ctrl · 02b67518
      由 Török Edwin 提交于 
      Impact: add new (default-off) tracing visualization feature

Usage example:

 mount -t debugfs nodev /sys/kernel/debug
 cd /sys/kernel/debug/tracing
 echo userstacktrace >iter_ctrl
 echo sched_switch >current_tracer
 echo 1 >tracing_enabled
 .... run application ...
 echo 0 >tracing_enabled

Then read one of 'trace','latency_trace','trace_pipe'.

To get the best output you can compile your userspace programs with
frame pointers (at least glibc + the app you are tracing).
Signed-off-by: NTörök Edwin <edwintorok@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      02b67518
  67. 13 11月, 2008 3 次提交
    • S
      ftrace: rename iter_ctrl to trace_options · ee6bce52
      由 Steven Rostedt 提交于 
      Impact: rename file /debug/tracing/iter_ctrl to /debug/tracing/trace_options

The original ftrace had a file called "iter_ctrl" that would control
the way the output was iterated. But this file grew into a catch all
for different trace options. This patch renames the file from iter_ctrl
to trace_options to reflect this change.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      ee6bce52
    • S
      ftrace: show buffer size in kilobytes · 1696b2b0
      由 Steven Rostedt 提交于 
      Impact: change the units of buffer_size_kb to kilobytes

This patch changes the units of the buffer_size_kb file to kilobytes.
Reading and writing to the file uses kilobytes as units. To help
users to know what units are used, the output of the file now
looks like:

  # cat /debug/tracing/buffer_size_kb
  1408
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      1696b2b0
    • S
      ftrace: rename trace_entries to buffer_size_kb · a94c80e7
      由 Steven Rostedt 提交于 
      Impact: rename of debugfs file trace_entries to buffer_size_kb

The original ftrace had fixed size entries, and the number of entries
was shown and modified via the file called trace_entries. By converting
to the unified trace buffer, we now allow for variable size entries
which makes the meaning of trace_entries pointless.

Since trace_size might be confused to the size of the trace, this patch
names it "buffer_size_kb" (thanks to Arjan van de Ven for this idea).

[ mingo@elte.hu: changed from buffer_size to buffer_size_kb ]

( Note, the units are still bytes - the next patch changes that,
  to keep the wide rename patch separate from the unit-change patch. )
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      a94c80e7