- 06 3月, 2012 8 次提交
-
-
由 Aaro Koskinen 提交于
Add minimal support for Nokia RM-696 board. Signed-off-by: NAaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Mircea Gherzan 提交于
The PandaBoard features a Texas Instruments WiLink7 Bluetooth chip, supported by the "btwilink" driver. Signed-off-by: NMircea Gherzan <mgherzan@gmail.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Grazvydas Ignotas 提交于
Add platform data for drivers that recently appeared in kernel: backlight and TWL4030 poweroff support. Signed-off-by: NGrazvydas Ignotas <notasas@gmail.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Uwe Kleine-König 提交于
sdp4430_spi_board_info.irq was initialized to ETH_KS8851_IRQ and in omap_4430sdp_init() overwritten with gpio_to_irq(ETH_KS8851_IRQ) before sdp4430_spi_board_info was registered. This is a bit confusing, so better don't initialize .irq and document that it is set later. Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Igor Grinberg 提交于
Add support for the EMAC Ethernet controller in the AM35xx SoC. Signed-off-by: NIgor Grinberg <grinberg@compulab.co.il> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Ilya Yanok 提交于
AM35xx SoCs include DaVinci EMAC IP. Initialization code in board-am3517evm.c is pretty board independent and will work for any AM35xx based board so move this code to it's own file to be reused by other boards. Signed-off-by: NIlya Yanok <yanok@emcraft.com> Signed-off-by: NIgor Grinberg <grinberg@compulab.co.il> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Vladimir Zapolskiy 提交于
This change converts TSC2005 related GPIO requests to be done with gpio_request_array() method and explicitly inits mux configuration for these GPIOs. Signed-off-by: NVladimir Zapolskiy <vz@mleia.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Alex 提交于
This patch adds omap_reserve functionality to board-omap3logic.c Signed-off-by: NAlex Gershgorin <alexg@meprolight.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 28 2月, 2012 5 次提交
-
-
由 Roland Stigge 提交于
This patch fixes a wrong loop limit on UART init. Signed-off-by: NRoland Stigge <stigge@antcom.de> Cc: stable@vger.kernel.org
-
由 Roland Stigge 提交于
This patch fixes a HW bug by flushing RX FIFOs of the UARTs on init. It was ported from NXP's git.lpclinux.com tree. Signed-off-by: NRoland Stigge <stigge@antcom.de> Cc: stable@vger.kernel.org
-
由 Roland Stigge 提交于
This patch fixes the wakeup disable function by clearing latched events. Signed-off-by: NRoland Stigge <stigge@antcom.de> Cc: stable@vger.kernel.org
-
由 Roland Stigge 提交于
This patch fixes the initialization of the interrupt controller of the LPC32xx by correctly setting up SIC1 and SIC2 instead of (wrongly) using the same value as for the Main Interrupt Controller (MIC). Signed-off-by: NRoland Stigge <stigge@antcom.de> Cc: stable@vger.kernel.org
-
由 Roland Stigge 提交于
The GPI_28 IRQ was not registered properly. The registration of IRQ_LPC32XX_GPI_28 was added and the (wrong) IRQ_LPC32XX_GPI_11 at LPC32XX_SIC1_IRQ(4) was replaced by IRQ_LPC32XX_GPI_28 (see manual of LPC32xx / interrupt controller). Signed-off-by: NRoland Stigge <stigge@antcom.de> Cc: stable@vger.kernel.org
-
- 27 2月, 2012 1 次提交
-
-
由 Ohad Ben-Cohen 提交于
omap3isp depends on omap's iommu and will fail to probe if initialized before it (which always happen if they are builtin). Make omap's iommu subsys_initcall as an interim solution until the probe deferral mechanism is merged. Reported-by: NJames <angweiyang@gmail.com> Debugged-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NOhad Ben-Cohen <ohad@wizery.com> Cc: stable <stable@vger.kernel.org> Cc: Tony Lindgren <tony@atomide.com> Cc: Hiroshi Doyu <hdoyu@nvidia.com> Cc: Joerg Roedel <Joerg.Roedel@amd.com> Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
-
- 24 2月, 2012 5 次提交
-
-
由 Danny Kukawka 提交于
arch/arm/mach-shmobile/board-ag5evm.c: included 'linux/dma-mapping.h' twice, remove the duplicate. Signed-off-by: NDanny Kukawka <danny.kukawka@bisect.de> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
Fix the bit field width information for the IPSR4 register in the r8a7779 pin function controller (PFC). Without this fix the Marzen board fails to receive data over the serial console due to misconfigured pin function for the RX pin. Signed-off-by: NMagnus Damm <damm@opensource.se> Tested-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: NSimon Horman <horms@verge.net.au> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
Convert the sh73a0 SMP code to use 32-bit PSTR access. This fixes wakeup from deep sleep for sh73a0 secondary CPUs. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Ohad Ben-Cohen 提交于
Fix this: arch/arm/mach-omap2/mailbox.c: In function 'omap2_mbox_probe': arch/arm/mach-omap2/mailbox.c:354: error: 'omap2_mboxes' undeclared (first use in this function) arch/arm/mach-omap2/mailbox.c:354: error: (Each undeclared identifier is reported only once arch/arm/mach-omap2/mailbox.c:354: error: for each function it appears in.) Which happens on CONFIG_ARCH_OMAP2 && !CONFIG_SOC_OMAP2420, due to missing omap2_mboxes declaration. In addition, make sure we declare the right mailbox instances for 2430. Reported-by: NRussell King <linux@arm.linux.org.uk> Signed-off-by: NOhad Ben-Cohen <ohad@wizery.com> Cc: Hiroshi Doyu <hdoyu@nvidia.com> Cc: Omar Ramirez Luna <omar.ramirez@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Matt Porter 提交于
This fixes smsc911x support on platforms using gpmc_smsc911x_init(). Commit c7e963f6 (net/smsc911x: Add regulator support) added the requirement that platforms provide vdd33a and vddvario supplies. Signed-off-by: NMatt Porter <mporter@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 22 2月, 2012 3 次提交
-
-
由 Tony Lindgren 提交于
Otherwise we can get the following on some compilers: arch/arm/mach-omap1/board-innovator.c:419:19: warning: array subscript is above array bounds [-Warray-bounds] arch/arm/mach-omap1/board-innovator.c:425:19: warning: array subscript is above array bounds [-Warray-bounds] Signed-off-by: NTony Lindgren <tony@atomide.com>
-
Otherwise we can get the following warning on some compilers: arch/arm/mach-omap2/board-omap3evm.c:384:11: warning: array subscript is above array bounds The omap3evm BSP enables a GPIO LED on the twl4030 chip. However, the static gpio_leds array doesn't have an entry for it. This is most likely a copy-and-paste error, because it has been in there since the first commit of the omap3evm BSP (53c5ec31). Signed-off-by: NArnout Vandecappelle (Essensium/Mind) <arnout@mind.be> [tony@atomide.com: updated comments with the warning] Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Eric Paris 提交于
Both bugs being fixed were introduced in: 29ef73b7 Include linux/audit.h to fix below build errors: CC arch/arm/kernel/ptrace.o arch/arm/kernel/ptrace.c: In function 'syscall_trace': arch/arm/kernel/ptrace.c:919: error: implicit declaration of function 'audit_syscall_exit' arch/arm/kernel/ptrace.c:921: error: implicit declaration of function 'audit_syscall_entry' arch/arm/kernel/ptrace.c:921: error: 'AUDIT_ARCH_ARMEB' undeclared (first use in this function) arch/arm/kernel/ptrace.c:921: error: (Each undeclared identifier is reported only once arch/arm/kernel/ptrace.c:921: error: for each function it appears in.) make[1]: *** [arch/arm/kernel/ptrace.o] Error 1 make: *** [arch/arm/kernel] Error 2 This part of the patch is: Reported-by: NAxel Lin <axel.lin@gmail.com> Reported-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> (They both provided patches to fix it) This patch also (at the request of the list) fixes the fact that ARM has both LE and BE versions however the audit code was called as if it was always BE. If audit userspace were to try to interpret the bits it got from a LE system it would obviously do so incorrectly. Fix this by using the right arch flag on the right system. This part of the patch is: Reported-by: NRussell King - ARM Linux <linux@arm.linux.org.uk> Signed-off-by: NEric Paris <eparis@redhat.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 21 2月, 2012 5 次提交
-
-
由 Russell King 提交于
The voltage domain code wants the voltage tables, which are in the opp*.c files. These files aren't built when PM_OPP is disabled, causing the following build errors at link time: twl-common.c:(.init.text+0x2e48): undefined reference to `omap34xx_vddmpu_volt_data' twl-common.c:(.init.text+0x2e4c): undefined reference to `omap34xx_vddcore_volt_data' twl-common.c:(.init.text+0x2e5c): undefined reference to `omap36xx_vddmpu_volt_data' twl-common.c:(.init.text+0x2e60): undefined reference to `omap36xx_vddcore_volt_data' twl-common.c:(.init.text+0x2830): undefined reference to `omap44xx_vdd_mpu_volt_data' twl-common.c:(.init.text+0x283c): undefined reference to `omap44xx_vdd_iva_volt_data' twl-common.c:(.init.text+0x2844): undefined reference to `omap44xx_vdd_core_volt_data' Acked-by: NKevin Hilman <khilman@ti.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Myron Stowe 提交于
The patch series to re-factor PCI's 'latency timer' setup (re: http://marc.info/?l=linux-kernel&m=131983853831049&w=2) forgot to remove the ARM specific definition of 'pcibios_max_latency' once such had been moved into the pci core resulting in ARM related compile errors - drivers/built-in.o:(.data+0x230): multiple definition of `pcibios_max_latency' arch/arm/common/built-in.o:(.data+0x40c): first defined here make[1]: *** [vmlinux.o] Error 1 In the series, patch 2/16 (commit 168c8619) converted the ARM specific version of 'pcibios_set_master()' to a non-inlined version. This was done in preperation for hosting it up into PCI's core, which was done in patch 10/16 (commit 96c55900) of the series (and where the removal of ARM's 'pcibios_max_latency' was overlooked). Reported-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NMyron Stowe <myron.stowe@redhat.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Santosh Shilimkar 提交于
Current ARM local timer code registers CPUFREQ notifiers even in case the twd_timer_setup() isn't called. That seems to be wrong and would eventually lead to kernel crash on the CPU frequency transitions on the SOCs where the local timer doesn't exist or broken because of hardware BUG. Fix it by testing twd_evt and *__this_cpu_ptr(twd_evt). The issue was observed with v3.3-rc3 and building an OMAP2+ kernel on OMAP3 SOC which doesn't have TWD. Below is the dump for reference : Unable to handle kernel paging request at virtual address 007e900 pgd = cdc20000 [007e9000] *pgd=00000000 Internal error: Oops: 5 [#1] SMP Modules linked in: CPU: 0 Not tainted (3.3.0-rc3-pm+debug+initramfs #9) PC is at twd_update_frequency+0x34/0x48 LR is at twd_update_frequency+0x10/0x48 pc : [<c001382c>] lr : [<c0013808>] psr: 60000093 sp : ce311dd8 ip : 00000000 fp : 00000000 r10: 00000000 r9 : 00000001 r8 : ce310000 r7 : c0440458 r6 : c00137f8 r5 : 00000000 r4 : c0947a74 r3 : 00000000 r2 : 007e9000 r1 : 00000000 r0 : 00000000 Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment usr Control: 10c5387d Table: 8dc20019 DAC: 00000015 Process sh (pid: 599, stack limit = 0xce3102f8) Stack: (0xce311dd8 to 0xce312000) 1dc0: 6000c 1de0: 00000001 00000002 00000000 00000000 00000000 00000000 00000 1e00: ffffffff c093d8f0 00000000 ce311ebc 00000001 00000001 ce310 1e20: c001386c c0437c4c c0e95b60 c0e95ba8 00000001 c0e95bf8 ffff4 1e40: 00000000 00000000 c005ef74 ce310000 c0435cf0 ce311ebc 00000 1e60: ce352b40 0007a120 c08d5108 c08ba040 c08ba040 c005f030 00000 1e80: c08bc554 c032fe2c 0007a120 c08d4b64 ce352b40 c08d8618 ffff8 1ea0: c08ba040 c033364c ce311ecc c0433b50 00000002 ffffffea c0330 1ec0: 0007a120 0007a120 22222201 00000000 22222222 00000000 ce357 1ee0: ce3d6000 cdc2aed8 ce352ba0 c0470164 00000002 c032f47c 00034 1f00: c0331cac ce352b40 00000007 c032f6d0 ce352bbc 0003d090 c0930 1f20: c093d8bc c03306a4 00000007 ce311f80 00000007 cdc2aec0 ce358 1f40: ce8d20c0 00000007 b6fe5000 ce311f80 00000007 ce310000 0000c 1f60: c000de74 ce987400 ce8d20c0 b6fe5000 00000000 00000000 0000c 1f80: 00000000 00000000 001fbac8 00000000 00000007 001fbac8 00004 1fa0: c000df04 c000dd60 00000007 001fbac8 00000001 b6fe5000 00000 1fc0: 00000007 001fbac8 00000007 00000004 b6fe5000 00000000 00202 1fe0: 00000000 beb565f8 00101ffc 00008e8c 60000010 00000001 00000 [<c001382c>] (twd_update_frequency+0x34/0x48) from [<c008ac4c>] ) [<c008ac4c>] (smp_call_function_single+0x17c/0x1c8) from [<c0013) [<c0013890>] (twd_cpufreq_transition+0x24/0x30) from [<c0437c4c>) [<c0437c4c>] (notifier_call_chain+0x44/0x84) from [<c005efe4>] () [<c005efe4>] (__srcu_notifier_call_chain+0x70/0xa4) from [<c005f) [<c005f030>] (srcu_notifier_call_chain+0x18/0x20) from [<c032fe2) [<c032fe2c>] (cpufreq_notify_transition+0xc8/0x1b0) from [<c0333) [<c033364c>] (omap_target+0x1b4/0x28c) from [<c032f47c>] (__cpuf) [<c032f47c>] (__cpufreq_driver_target+0x50/0x64) from [<c0331d24) [<c0331d24>] (cpufreq_set+0x78/0x98) from [<c032f6d0>] (store_sc) [<c032f6d0>] (store_scaling_setspeed+0x5c/0x74) from [<c03306a4>) [<c03306a4>] (store+0x58/0x74) from [<c014d868>] (sysfs_write_fi) [<c014d868>] (sysfs_write_file+0x80/0xb4) from [<c00f2c2c>] (vfs) [<c00f2c2c>] (vfs_write+0xa8/0x138) from [<c00f2e9c>] (sys_write) [<c00f2e9c>] (sys_write+0x40/0x6c) from [<c000dd60>] (ret_fast_s) Code: e594300c e792210c e1a01000 e5840004 (e7930002) ---[ end trace 5da3b5167c1ecdda ]--- Reported-by: NKevin Hilman <khilman@ti.com> Acked-by: NMarc Zyngier <marc.zyngier@arm.com> Tested-by: NKevin Hilman <khilman@ti.com> Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Tony Lindgren 提交于
Otherwise we get the following error: arch/arm/mach-omap2/built-in.o: In function `n8x0_mmc_callback': twl-common.c:(.text+0x108a0): undefined reference to `omap_mmc_notify_cover_event' Fix this by warning about unusable MMC cover events. The long term fix needs to change the MMC drivers to register board specific callbacks directly with PMIC. Reported-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
On some omaps twl4030_gpio has a callback to try to initialize the MMC controller. If twl4030_gpio is compiled as a module, bad things can happen because the callback function starts calling functions that are supposed to be marked __init: Kernel panic - not syncing: Attempted to kill the idle task! twl4030_gpio twl4030_gpio: can't dispatch IRQs from modules gpiochip_add: registered GPIOs 192 to 209 on device: twl4030 Unable to handle kernel paging request at virtual address b82a4c74 ... Additionally if this does not fail, warnings are produced about trying to register the MMC multiple times. Fix this by removing __init from omap_mux_get_by_name, and add checks if omap2_hsmmc_init() is getting called more than once. Note that this will get fixed properly later on by splitting omap2_hsmmc_init into two functions. Reported-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 17 2月, 2012 1 次提交
-
-
由 Axel Lin 提交于
The audio on hx4700 needs this to properly work. Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com> Signed-off-by: NDmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: NAxel Lin <axel.lin@gmail.com> Acked-by: NMarek Vasut <marek.vasut@gmail.com> Tested-by: NPaul Parsons <lost.distance@yahoo.com> Signed-off-by: NHaojian Zhuang <haojian.zhuang@gmail.com>
-
- 16 2月, 2012 9 次提交
-
-
由 Danny Kukawka 提交于
arch/arm/mach-pxa/pxa25x.c and arch/arm/mach-pxa/saarb.c included 'linux/gpio.h' twice, remove the duplicates. Signed-off-by: NDanny Kukawka <danny.kukawka@bisect.de> Signed-off-by: NHaojian Zhuang <haojian.zhuang@gmail.com>
-
由 Danny Kukawka 提交于
arch/arm/mach-mmp/: some files include some headers twice: - arch/arm/mach-mmp/aspenite.c and arch/arm/mach-mmp/tavorevb.c: 'linux/gpio.h' - arch/arm/mach-mmp/pxa168.c: 'linux/platform_device.h' Remove the duplicates. Signed-off-by: NDanny Kukawka <danny.kukawka@bisect.de> Signed-off-by: NHaojian Zhuang <haojian.zhuang@gmail.com>
-
由 Danny Kukawka 提交于
arch/arm/mach-pxa/pxa27x.c included 'linux/gpio.h' twice, remove the duplicate. Signed-off-by: NDanny Kukawka <danny.kukawka@bisect.de> Signed-off-by: NHaojian Zhuang <haojian.zhuang@gmail.com>
-
由 Haojian Zhuang 提交于
arch/arm/mach-pxa/sharpsl_pm.c: In function 'sharpsl_pm_pxa_read_max1111': arch/arm/mach-pxa/sharpsl_pm.c:180: warning: ISO C90 forbids mixed declarations and code Signed-off-by: NHaojian Zhuang <haojian.zhuang@marvell.com>
-
由 Haojian Zhuang 提交于
(~GPLR0 & GPIO_bit(SPITZ_GPIO_KEY_INT)) | (GPLR0 & GPIO_bit(SPITZ_GPIO_SYNC)); After using gpio_get_value, the statement should be in below. ((!gpio_get_value(SPITZ_GPIO_KEY_INT) << GPIO_bit(SPITZ_GPIO_KEY_INT)) | gpio_get_value(SPITZ_GPIO_SYNC)); Signed-off-by: NHaojian Zhuang <haojian.zhuang@marvell.com>
-
由 Olof Johansson 提交于
For files that include asm/processor.h but not asm/system.h: arch/arm/mach-msm/include/mach/uncompress.h: In function 'putc': arch/arm/mach-msm/include/mach/uncompress.h:48:3: error: implicit declaration of function 'smp_mb' [-Werror=implicit-function-declaration] In this case, smp_mb() is from the cpu_relax() call in the msm putc(). It likely went uncaught when the uncompress.h change went in since the defconfig didn't enable that code path, but later changes (e76f4750: ARM: debug: arrange Kconfig options more logically) resulted in the option being on for msm_defconfig and thus exposed it. Signed-off-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Javi Merino 提交于
This fixes the thrd->req_running field being accessed before thrd is checked for null. The error was introduced in abb959f8: ARM: 7237/1: PL330: Fix driver freeze Reference: <1326458191-23492-1-git-send-email-mans.rullgard@linaro.org> Cc: stable@kernel.org Signed-off-by: NMans Rullgard <mans.rullgard@linaro.org> Acked-by: NJavi Merino <javi.merino@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Javi Merino 提交于
dst_cache_ctrl affects bits 3, 1 and 0 of AWCACHE but it is a 3-bit field in the Channel Control Register (see Table 3-21 of the DMA-330 Technical Reference Manual) and should be programmed as such. Reference: <1320244259-10496-3-git-send-email-javi.merino@arm.com> Signed-off-by: NJavi Merino <javi.merino@arm.com> Acked-by: NJassi Brar <jassisinghbrar@gmail.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Rabin Vincent 提交于
Bootup with lockdep enabled has been broken on v7 since b46c0f74 ("ARM: 7321/1: cache-v7: Disable preemption when reading CCSIDR"). This is because v7_setup (which is called very early during boot) calls v7_flush_dcache_all, and the save_and_disable_irqs added by that patch ends up attempting to call into lockdep C code (trace_hardirqs_off()) when we are in no position to execute it (no stack, MMU off). Fix this by using a notrace variant of save_and_disable_irqs. The code already uses the notrace variant of restore_irqs. Reviewed-by: NNicolas Pitre <nico@linaro.org> Acked-by: NStephen Boyd <sboyd@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: stable@vger.kernel.org Signed-off-by: NRabin Vincent <rabin@rab.in> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 15 2月, 2012 3 次提交
-
-
由 Catalin Marinas 提交于
This patch expands the Kconfig dependencies for ARM_LPAE to not allow enabling when architectures other than ARMv7 are built into the kernel. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Reported-by: NRussell King <linux@arm.linux.org.uk> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Felipe Balbi 提交于
when commit 3528c58e (OMAP: omap_device: when building return platform_device instead of omap_device) started returning a platform_device instead of a omap_device pointer when building a device, it failed to convert all users introducing a compile warning when building arch/arm/mach-omap2/usb-host.c. This patch fixes that warning. Signed-off-by: NFelipe Balbi <balbi@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Santosh Shilimkar 提交于
arm_memblock_steal() is not suppose to be used outside ->reserve callback. OMAP barrier errata code was using it outside reserve callback and hence it was broken. Move the allocation as part of ->reserve callback to fix the it. Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-