ARM: OMAP3: Add omap3 EVM support

Add omap3 EVM support
Signed-off-by: NSyed Mohammed Khasim <khasim@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

arch/arm/mach-omap2/Kconfig

@@ -56,6 +56,10 @@ config MACH_OVERO
 	bool "Gumstix Overo board"
 	depends on ARCH_OMAP3 && ARCH_OMAP34XX
 
+config MACH_OMAP3EVM
+	bool "OMAP 3530 EVM board"
+	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+
 config MACH_OMAP3_PANDORA
 	bool "OMAP3 Pandora"
 	depends on ARCH_OMAP3 && ARCH_OMAP34XX

arch/arm/mach-omap2/Makefile

@@ -45,6 +45,8 @@ obj-$(CONFIG_MACH_OMAP_LDP)		+= board-ldp.o \
 					   mmc-twl4030.o
 obj-$(CONFIG_MACH_OVERO)		+= board-overo.o \
 					   mmc-twl4030.o
+obj-$(CONFIG_MACH_OMAP3EVM)		+= board-omap3evm.o \
+					   mmc-twl4030.o
 obj-$(CONFIG_MACH_OMAP3_PANDORA)	+= board-omap3pandora.o \
 					   mmc-twl4030.o
 obj-$(CONFIG_MACH_OMAP_3430SDP)		+= board-3430sdp.o \

arch/arm/mach-omap2/board-omap3evm.c

+/*
+ * linux/arch/arm/mach-omap2/board-omap3evm.c
+ *
+ * Copyright (C) 2008 Texas Instruments
+ *
+ * Modified from mach-omap2/board-3430sdp.c
+ *
+ * Initial code: Syed Mohammed Khasim
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/leds.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+#include <linux/i2c/twl4030.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/board.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/common.h>
+#include <mach/mcspi.h>
+#include <mach/keypad.h>
+
+#include "sdram-micron-mt46h32m32lf-6.h"
+#include "mmc-twl4030.h"
+
+#define OMAP3_EVM_TS_GPIO	175
+
+#define OMAP3EVM_ETHR_START	0x2c000000
+#define OMAP3EVM_ETHR_SIZE	1024
+#define OMAP3EVM_ETHR_GPIO_IRQ	176
+#define OMAP3EVM_SMC911X_CS	5
+
+static struct resource omap3evm_smc911x_resources[] = {
+	[0] =	{
+		.start	= OMAP3EVM_ETHR_START,
+		.end	= (OMAP3EVM_ETHR_START + OMAP3EVM_ETHR_SIZE - 1),
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] =	{
+		.start	= OMAP_GPIO_IRQ(OMAP3EVM_ETHR_GPIO_IRQ),
+		.end	= OMAP_GPIO_IRQ(OMAP3EVM_ETHR_GPIO_IRQ),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device omap3evm_smc911x_device = {
+	.name		= "smc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(omap3evm_smc911x_resources),
+	.resource	= &omap3evm_smc911x_resources[0],
+};
+
+static inline void __init omap3evm_init_smc911x(void)
+{
+	int eth_cs;
+	struct clk *l3ck;
+	unsigned int rate;
+
+	eth_cs = OMAP3EVM_SMC911X_CS;
+
+	l3ck = clk_get(NULL, "l3_ck");
+	if (IS_ERR(l3ck))
+		rate = 100000000;
+	else
+		rate = clk_get_rate(l3ck);
+
+	if (gpio_request(OMAP3EVM_ETHR_GPIO_IRQ, "SMC911x irq") < 0) {
+		printk(KERN_ERR "Failed to request GPIO%d for smc911x IRQ\n",
+			OMAP3EVM_ETHR_GPIO_IRQ);
+		return;
+	}
+
+	gpio_direction_input(OMAP3EVM_ETHR_GPIO_IRQ);
+}
+
+static struct omap_uart_config omap3_evm_uart_config __initdata = {
+	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
+static struct twl4030_hsmmc_info mmc[] = {
+	{
+		.mmc		= 1,
+		.wires		= 4,
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= 63,
+	},
+	{}	/* Terminator */
+};
+
+static struct gpio_led gpio_leds[] = {
+	{
+		.name			= "omap3evm::ledb",
+		/* normally not visible (board underside) */
+		.default_trigger	= "default-on",
+		.gpio			= -EINVAL,	/* gets replaced */
+		.active_low		= true,
+	},
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+	.leds		= gpio_leds,
+	.num_leds	= ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device leds_gpio = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &gpio_led_info,
+	},
+};
+
+
+static int omap3evm_twl_gpio_setup(struct device *dev,
+		unsigned gpio, unsigned ngpio)
+{
+	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
+	omap_cfg_reg(L8_34XX_GPIO63);
+	mmc[0].gpio_cd = gpio + 0;
+	twl4030_mmc_init(mmc);
+
+	/*
+	 * Most GPIOs are for USB OTG.  Some are mostly sent to
+	 * the P2 connector; notably LEDA for the LCD backlight.
+	 */
+
+	/* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
+	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
+
+	platform_device_register(&leds_gpio);
+
+	return 0;
+}
+
+static struct twl4030_gpio_platform_data omap3evm_gpio_data = {
+	.gpio_base	= OMAP_MAX_GPIO_LINES,
+	.irq_base	= TWL4030_GPIO_IRQ_BASE,
+	.irq_end	= TWL4030_GPIO_IRQ_END,
+	.use_leds	= true,
+	.setup		= omap3evm_twl_gpio_setup,
+};
+
+static struct twl4030_usb_data omap3evm_usb_data = {
+	.usb_mode	= T2_USB_MODE_ULPI,
+};
+
+static int omap3evm_keymap[] = {
+	KEY(0, 0, KEY_LEFT),
+	KEY(0, 1, KEY_RIGHT),
+	KEY(0, 2, KEY_A),
+	KEY(0, 3, KEY_B),
+	KEY(1, 0, KEY_DOWN),
+	KEY(1, 1, KEY_UP),
+	KEY(1, 2, KEY_E),
+	KEY(1, 3, KEY_F),
+	KEY(2, 0, KEY_ENTER),
+	KEY(2, 1, KEY_I),
+	KEY(2, 2, KEY_J),
+	KEY(2, 3, KEY_K),
+	KEY(3, 0, KEY_M),
+	KEY(3, 1, KEY_N),
+	KEY(3, 2, KEY_O),
+	KEY(3, 3, KEY_P)
+};
+
+static struct twl4030_keypad_data omap3evm_kp_data = {
+	.rows		= 4,
+	.cols		= 4,
+	.keymap		= omap3evm_keymap,
+	.keymapsize	= ARRAY_SIZE(omap3evm_keymap),
+	.rep		= 1,
+};
+
+static struct twl4030_madc_platform_data omap3evm_madc_data = {
+	.irq_line	= 1,
+};
+
+static struct twl4030_platform_data omap3evm_twldata = {
+	.irq_base	= TWL4030_IRQ_BASE,
+	.irq_end	= TWL4030_IRQ_END,
+
+	/* platform_data for children goes here */
+	.keypad		= &omap3evm_kp_data,
+	.madc		= &omap3evm_madc_data,
+	.usb		= &omap3evm_usb_data,
+	.gpio		= &omap3evm_gpio_data,
+};
+
+static struct i2c_board_info __initdata omap3evm_i2c_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("twl4030", 0x48),
+		.flags = I2C_CLIENT_WAKE,
+		.irq = INT_34XX_SYS_NIRQ,
+		.platform_data = &omap3evm_twldata,
+	},
+};
+
+static int __init omap3_evm_i2c_init(void)
+{
+	omap_register_i2c_bus(1, 2600, omap3evm_i2c_boardinfo,
+			ARRAY_SIZE(omap3evm_i2c_boardinfo));
+	omap_register_i2c_bus(2, 400, NULL, 0);
+	omap_register_i2c_bus(3, 400, NULL, 0);
+	return 0;
+}
+
+static struct platform_device omap3_evm_lcd_device = {
+	.name		= "omap3evm_lcd",
+	.id		= -1,
+};
+
+static struct omap_lcd_config omap3_evm_lcd_config __initdata = {
+	.ctrl_name	= "internal",
+};
+
+static void ads7846_dev_init(void)
+{
+	if (gpio_request(OMAP3_EVM_TS_GPIO, "ADS7846 pendown") < 0)
+		printk(KERN_ERR "can't get ads7846 pen down GPIO\n");
+
+	gpio_direction_input(OMAP3_EVM_TS_GPIO);
+
+	omap_set_gpio_debounce(OMAP3_EVM_TS_GPIO, 1);
+	omap_set_gpio_debounce_time(OMAP3_EVM_TS_GPIO, 0xa);
+}
+
+static int ads7846_get_pendown_state(void)
+{
+	return !gpio_get_value(OMAP3_EVM_TS_GPIO);
+}
+
+struct ads7846_platform_data ads7846_config = {
+	.x_max			= 0x0fff,
+	.y_max			= 0x0fff,
+	.x_plate_ohms		= 180,
+	.pressure_max		= 255,
+	.debounce_max		= 10,
+	.debounce_tol		= 3,
+	.debounce_rep		= 1,
+	.get_pendown_state	= ads7846_get_pendown_state,
+	.keep_vref_on		= 1,
+	.settle_delay_usecs	= 150,
+};
+
+static struct omap2_mcspi_device_config ads7846_mcspi_config = {
+	.turbo_mode	= 0,
+	.single_channel	= 1,	/* 0: slave, 1: master */
+};
+
+struct spi_board_info omap3evm_spi_board_info[] = {
+	[0] = {
+		.modalias		= "ads7846",
+		.bus_num		= 1,
+		.chip_select		= 0,
+		.max_speed_hz		= 1500000,
+		.controller_data	= &ads7846_mcspi_config,
+		.irq			= OMAP_GPIO_IRQ(OMAP3_EVM_TS_GPIO),
+		.platform_data		= &ads7846_config,
+	},
+};
+
+static void __init omap3_evm_init_irq(void)
+{
+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
+	omap_init_irq();
+	omap_gpio_init();
+	omap3evm_init_smc911x();
+}
+
+static struct omap_board_config_kernel omap3_evm_config[] __initdata = {
+	{ OMAP_TAG_UART,	&omap3_evm_uart_config },
+	{ OMAP_TAG_LCD,		&omap3_evm_lcd_config },
+};
+
+static struct platform_device *omap3_evm_devices[] __initdata = {
+	&omap3_evm_lcd_device,
+	&omap3evm_smc911x_device,
+};
+
+static void __init omap3_evm_init(void)
+{
+	omap3_evm_i2c_init();
+
+	platform_add_devices(omap3_evm_devices, ARRAY_SIZE(omap3_evm_devices));
+	omap_board_config = omap3_evm_config;
+	omap_board_config_size = ARRAY_SIZE(omap3_evm_config);
+
+	spi_register_board_info(omap3evm_spi_board_info,
+				ARRAY_SIZE(omap3evm_spi_board_info));
+
+	omap_serial_init();
+	usb_musb_init();
+	ads7846_dev_init();
+}
+
+static void __init omap3_evm_map_io(void)
+{
+	omap2_set_globals_343x();
+	omap2_map_common_io();
+}
+
+MACHINE_START(OMAP3EVM, "OMAP3 EVM")
+	/* Maintainer: Syed Mohammed Khasim - Texas Instruments */
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= omap3_evm_map_io,
+	.init_irq	= omap3_evm_init_irq,
+	.init_machine	= omap3_evm_init,
+	.timer		= &omap_timer,
+MACHINE_END