- 10 2月, 2007 1 次提交
-
-
由 Nick Piggin 提交于
Remove find_trylock_page as per the removal schedule. Signed-off-by: NNick Piggin <npiggin@suse.de> [ Let's see if anybody screams ] Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 09 2月, 2007 18 次提交
-
-
由 David S. Miller 提交于
To provide the __be* types, even for userspace includes. Reported by Andrew Walrond. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jennifer Hunt 提交于
From: Jennifer Hunt <jenhunt@us.ibm.com> This patch adds AF_IUCV socket support. Signed-off-by: NFrank Pavlic <fpavlic@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andrew Hendry 提交于
echo "1" > /proc/sys/net/x25/x25_forward To turn on x25_forwarding, defaults to off Requires the previous patch. Signed-off-by: NAndrew Hendry <andrew.hendry@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shinta Sugimoto 提交于
Extend PF_KEYv2 framework so that user application can take advantage of MIGRATE feature via PF_KEYv2 interface. User application can either send or receive an MIGRATE message to/from PF_KEY socket. Detail information can be found in the internet-draft <draft-sugimoto-mip6-pfkey-migrate>. Signed-off-by: NShinta Sugimoto <shinta.sugimoto@ericsson.com> Signed-off-by: NMasahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shinta Sugimoto 提交于
Extend the XFRM framework so that endpoint address(es) in the XFRM databases could be dynamically updated according to a request (MIGRATE message) from user application. Target XFRM policy is first identified by the selector in the MIGRATE message. Next, the endpoint addresses of the matching templates and XFRM states are updated according to the MIGRATE message. Signed-off-by: NShinta Sugimoto <shinta.sugimoto@ericsson.com> Signed-off-by: NMasahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Move ip6t_standard/ip6t_error_target/ip6t_error definitions to ip6_tables.h instead of defining them in each table individually. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Masahide NAKAMURA 提交于
This introduces match for Mobility Header (MH) described by Mobile IPv6 specification (RFC3775). User can specify the MH type or its range to be matched. Signed-off-by: NMasahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: NYasuyuki Kozakai <kozakai@linux-ipv6.org> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jan Engelhardt 提交于
Signed-off-by: NJan Engelhardt <jengelh@gmx.de> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jan Engelhardt 提交于
Use the x_tables functions directly to make it better visible which parts are shared between ip_tables and ip6_tables. Signed-off-by: NJan Engelhardt <jengelh@gmx.de> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Leblond 提交于
This patch adds support to NAT to randomize source ports. Signed-off-by: NEric Leblond <eric@inl.fr> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Do liberal tracking (only RSTs need to be in-window) for connections picked up without seeing a SYN to deal with window scaling. Also change logging of invalid packets not to log packets accepted by liberal tracking to avoid spamming the logs. Based on suggestion from James Ralston <ralston@pobox.com> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michal Schmidt 提交于
This is nf_conntrack_sane, a netfilter connection tracking helper module for the SANE protocol used by the 'saned' daemon to make scanners available via network. The SANE protocol uses separate control & data connections, similar to passive FTP. The helper module is needed to recognize the data connection as RELATED to the control one. Signed-off-by: NMichal Schmidt <mschmidt@redhat.com> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
There was no real useful information from the unregister_netdevice() return code, the only error occurred in a situation that was a driver bug. So change it to a void function. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Adrian Bunk 提交于
This patch contains the following cleanups: - make the following needlessly global functions static: - lock_adapter_irq() - unlock_adapter_irq() - #if 0 the following unused global functions: - wanrouter_encapsulate() - wanrouter_type_trans() Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Baruch Even 提交于
Move DSACK code outside the SACK fast-path checking code. If the DSACK determined that the information was too old we stayed with a partial cache copied. Most likely this matters very little since the next packet will not be DSACK and we will find it in the cache. but it's still not good form and there is little reason to couple the two checks. Since the SACK receive cache doesn't need the data to be in host order we also remove the ntohl in the checking loop. Signed-off-by: NBaruch Even <baruch@ev-en.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
This patch is needed to make ISC's DHCP server (and probably other DHCP servers/clients using AF_PACKET) to be able to serve another client on the same Xen host. The problem is that packets between different domains on the same Xen host only have partial checksums. Unfortunately this piece of information is not passed along in AF_PACKET unless you're using the mmap interface. Since dhcpd doesn't support packet-mmap, UDP packets from the same host come out with apparently bogus checksums. This patch adds a mechanism for AF_PACKET recvmsg(2) to return the status along with the packet. It does so by adding a new cmsg that contains this information along with some other relevant data such as the original packet length. I didn't include the time stamp information since there is already a cmsg for that. This patch also changes the mmap code to set the CSUMNOTREADY flag on all packets instead of just outoing packets on cooked sockets. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 2月, 2007 21 次提交
-
-
由 Jay Cliburn 提交于
This driver is a modified version of the Attansic reference driver for the L1 ethernet adapter. Attansic has granted permission for its inclusion in the mainline kernel. Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Greg Kroah-Hartman 提交于
This reverts commit 2943ecf2. This should go through the SPI maintainer, it was my fault that it did not. Especially as it conflicts with other patches he has pending. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Eric W. Biederman 提交于
The arch hooks arch_setup_msi_irq and arch_teardown_msi_irq are now responsible for allocating and freeing the linux irq in addition to setting up the the linux irq to work with the interrupt. arch_setup_msi_irq now takes a pci_device and a msi_desc and returns an irq. With this change in place this code should be useable by all platforms except those that won't let the OS touch the hardware like ppc RTAS. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Acked-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Eric W. Biederman 提交于
We need to be able to get from an irq number to a struct msi_desc. The msi_desc array in msi.c had several short comings the big one was that it could not be used outside of msi.c. Using irq_data in struct irq_desc almost worked except on some architectures irq_data needs to be used for something else. So this patch adds a msi_desc pointer to irq_desc, adds the appropriate wrappers and changes all of the msi code to use them. The dynamic_irq_init/cleanup code was tweaked to ensure the new field is left in a well defined state. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Acked-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Eric W. Biederman 提交于
The function msi_lookup_irq was horrible. As a side effect of running it changed dev->irq, and then the callers would need to change it back. In addition it does a global scan through all of the irqs, which seems to be the sole justification of the msi_lock. To remove the neede for msi_lookup_irq I added first_msi_irq to struct pci_dev. Then depending on the context I replaced msi_lookup_irq with dev->first_msi_irq, dev->msi_enabled, or dev->msix_enabled. msi_enabled and msix_enabled were already present in pci_dev for other reasons. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Acked-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Michael Ellerman 提交于
pci_scan_msi_device() doesn't do anything anymore, so remove it. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Satoru Takeuchi 提交于
Cleanup MSI code as follows: - fix some types - fix strange local variable definition - delete unnecessary blank line - add comment to #endif which is far from corresponding #ifdef Signed-off-by: NSatoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Adrian Bunk 提交于
Since isa_bridge is neither assigned any value !NULL nor used on !Alpha, there's no reason for providing it. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Adrian Bunk 提交于
On Fri, Nov 17, 2006 at 09:32:36AM -0500, Alan Cox wrote: > > Soon we should deprecate pci_find_device as well So let's mark it as __deprecated now, which also has the side effect that noone can later whine that removing it might break some shiny external modules. Oh, and if anything starts complaining "But this adds some warnings to my kernel build!", he should either first fix the 200 kB (sic) of warnings I'm getting in 2.6.19-rc5-mm2 starting at MODPOST or go to hell. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Acked-by: NAlan Cox <alan@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Adrian Bunk 提交于
This patch removes the no longer used pci_find_device_reverse(). Signed-off-by: NAdrian Bunk <bunk@stusta.de> Acked-by: NAlan Cox <alan@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Linas Vepstas 提交于
Add very simple routine to indicate the pci channel error state. Signed-off-by: NLinas Vepstas <linas@austin.ibm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Hidetoshi Seto 提交于
This patch adds the following changes into generic PCI code especially for PCI legacy I/O port free drivers. - Added new pci_request_selected_regions() and pci_release_selected_regions() for PCI legacy I/O port free drivers in order to request/release only the selected regions. - Added helper routine pci_select_bars() which makes proper mask of BARs from the specified resource type. This would be very helpful for users of pci_enable_device_bars(). Signed-off-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Cc: Inaky Perez-Gonzalez <inaky@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as841) removes from usbcore a couple of support routines meant to help with bandwidth allocation. With the changes to uhci-hcd in the previous patch, these routines are no longer used anywhere. Also removed is the CONFIG_USB_BANDWIDTH option; it no longer does anything and is no longer needed since the HCDs now handle bandwidth issues correctly. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Geoff Levand 提交于
Add the USB HID quirk HID_QUIRK_SONY_PS3_CONTROLLER. This sends an HID_REQ_GET_REPORT to the the PS3 controller to put the device into 'operational mode'. Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Sarah Bailey 提交于
Added a function to check if an endpoint is a control endpoint. There were similar functions for bulk, interrupt, and isoc, but not for control endpoints. Signed-off-by: NSarah Bailey <saharabeara@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
Thanks to Johannes Hölzl <johannes.hoelzl@gmx.de> for fixing a few things and getting it all working properly. This adds support for dynamic usb ids to the usb serial core. The file "new_id" will show up under the usb serial driver, not the usb driver associated with the usb-serial driver (yeah, it can be a bit confusing at first glance...) This patch also modifies the USB core to allow the usb-serial core to reuse much of the dynamic id logic. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NJohannes Hölzl <johannes.hoelzl@gmx.de>
-
由 David Brownell 提交于
Add USB_CLASS_MISC to <linux/usb/ch9.h> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Brownell 提交于
This moves <linux/usb_ch9.h> to <linux/usb/ch9.h> to reduce some of the clutter of usb header files. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
This moves the usb class devices that control the usbfs nodes to show up in the proper place in the larger device tree. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Eric W. Biederman 提交于
The problem. When implementing a network namespace I need to be able to have multiple network devices with the same name. Currently this is a problem for /sys/class/net/*. What I want is a separate /sys/class/net directory in sysfs for each network namespace, and I want to name each of them /sys/class/net. I looked and the VFS actually allows that. All that is needed is for /sys/class/net to implement a follow link method to redirect lookups to the real directory you want. Implementing a follow link method that is sensitive to the current network namespace turns out to be 3 lines of code so it looks like a clean approach. Modifying sysfs so it doesn't get in my was is a bit trickier. I am calling the concept of multiple directories all at the same path in the filesystem shadow directories. With the directory entry really at that location the shadow master. The following patch modifies sysfs so it can handle a directory structure slightly different from the kobject tree so I can implement the shadow directories for handling /sys/class/net/. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Cc: Maneesh Soni <maneesh@in.ibm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-