Autoload the vcan module when a vcan instance is to be created by
'ip link add type vcan'
Signed-off-by: NOliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

Similar to the virtual ethernet driver veth, vxcan implements a
local CAN traffic tunnel between two virtual CAN network devices.
See Kconfig entry for details.
Signed-off-by: NOliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

The CAN gateway was not implemented as per-net in the initial network
namespace support by Mario Kicherer (8e8cda6d).
This patch enables the CAN gateway to be used in different namespaces.
Signed-off-by: NOliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

The CAN_BCM protocol and its procfs entries were not implemented as per-net
in the initial network namespace support by Mario Kicherer (8e8cda6d).
This patch adds the missing per-net functionality for the CAN BCM.
Signed-off-by: NOliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

The statistics and its proc output was not implemented as per-net in the
initial network namespace support by Mario Kicherer (8e8cda6d).
This patch adds the missing per-net statistics for the CAN subsystem.
Signed-off-by: NOliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

can_rx_alldev_list is a per-net data structure now. Remove it's definition
here and can_rx_dev_list too.
Signed-off-by: NOliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

The namespace support for the CAN subsystem does not need any additional
memory. So when ".size = 0" there's no extra memory allocated by the system.
And therefore ".id" is obsolete too.
Signed-off-by: NOliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

The can_rx_alldev_list is a per-net data structure now and allocated in
can_pernet_init(). Make sure the memory is free'd in can_pernet_exit() too.
Signed-off-by: NOliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

SocketCAN driver for Microchip CAN BUS Analyzer
(http://www.microchip.com/development-tools/)

Changes in v4:
- possible memory leak fixed in mcba_usb_write_bulk_callback
- LED support added
- failure handling in mcba_usb_probe improved
- C99 initializers for structs on stack

Changes in v3:
- improved/simplified CAN ID conversion
- functions for transmission of skb and cmd separated
- fixed/improved netif_stop_queue handling
- style/cosmetic corrections

Changes in v2:
- Termination handling reimplemented to fit new netlink API
(IFLA_CAN_TERMINATION)
- Bitrate handling reimplemented to fit new netlink API
(IFLA_CAN_BITRATE)
- CAN ID conversion refactored (changed from macro to inline functions)
- CAN DLC handling using get_can_dlc()
- Endianness handling for can_speed introduced
- Debugging removed
- Redundant error prints removed
- Style/cosmetic corrections (i.e. macro names, redefs, inits etc.)
Signed-off-by: NRemigiusz Kołłątaj <remigiusz.kollataj@mobica.com>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

* Added defines for TX Event FIFO Element
* Adapted ndo_start_xmit function.
  For versions >= v3.1.x it uses the TX FIFO to optimize the data
  throughput. It stores the echo skb at the same index as in the
  M_CAN's TX FIFO. The frame's message marker is set to this index.
  This message marker is received in the TX Event FIFO after
  the message was successfully transmitted. It is used to echo the
  correct echo skb back to the network stack.
* Added m_can_echo_tx_event function. It reads all received
  message markers in the TX Event FIFO and loops back the
  corresponding echo skbs.
* ISR checks for new TX Event Entry interrupt for version >= 3.1.x.
Signed-off-by: NMario Huettel <mario.huettel@gmx.net>
Reviewed-by: NOliver Hartkopp <socketcan@hartkopp.net>
Tested-by: NQuentin Schulz <quentin.schulz@free-electrons.com>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

* TX/TX Event FIFO sizes are configured for version >= v3.1.x
Signed-off-by: NMario Huettel <mario.huettel@gmx.net>
Tested-by: NQuentin Schulz <quentin.schulz@free-electrons.com>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

This patch adapts the initialization of the M_CAN. So it can be used
with all versions >= 3.0.x.

Changes:
* Added version element to m_can_priv structure to hold M_CAN version.
* Renamed bittiming structs for version 3.0.x
* Added new bittiming structs for version >= 3.1.x
* Function alloc_m_can_dev takes 2 new arguments. The TX FIFO size and the
  base address of the module.
* Chip configuration for CAN_CTRLMODE_LOOPBACK is changed: Enabled
  CCCR_MON bit. In combination with TEST_LBCK it activates the internal
  loopback mode. Leaving CCCR_MON '0' results in external loopback mode.
* Clocks are temporarily enabled by platform_propbe function in order to
  allow read access to the Core Release register and the Control Register.
  Registers are used to detect M_CAN version and optional Non-ISO Feature.

Initialization of M_CAN for version >= 3.1.x:
* TX FIFO of M_CAN is used to transmit frames. The driver does not need to
  stop the tx queue after each frame sent.
* Initialization of TX Event FIFO is added.
* NON-ISO is fixed for all M_CAN versions < 3.2.x. Version 3.2.x _can_ have
  the NISO (Non-ISO) bit which can switch the mode of the M_CAN to Non-ISO
  mode. This bit does not have to be writeable. Therefore it is checked.
  If it is writable Non-ISO support is added to the controllers supported
  CAN modes.

New Functions:
* Function to check the Core Release version. The read value determines the
  behaviour of the driver.
* Function to check if the NISO bit for version >= 3.2.x is implemented.
Signed-off-by: NMario Huettel <mario.huettel@gmx.net>
Reviewed-by: NOliver Hartkopp <socketcan@hartkopp.net>
Tested-by: NQuentin Schulz <quentin.schulz@free-electrons.com>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

* Updated register defines to newest M_CAN version (v3.2.1).
* Changed defines in the whole code.
Signed-off-by: NMario Huettel <mario.huettel@gmx.net>
Reviewed-by: NOliver Hartkopp <socketcan@hartkopp.net>
Tested-by: NQuentin Schulz <quentin.schulz@free-electrons.com>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

The virtual address of the device was printed. I removed it because it
leaks internal information.
Signed-off-by: NMario Huettel <mario.huettel@gmx.net>
Tested-by: NQuentin Schulz <quentin.schulz@free-electrons.com>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

FIFO water marks disabled because the driver doesn't handle water mark
events.
Signed-off-by: NMario Huettel <mario.huettel@gmx.net>
Reviewed-by: NOliver Hartkopp <socketcan@hartkopp.net>
Tested-by: NQuentin Schulz <quentin.schulz@free-electrons.com>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

* Disabled interrupt line 1. The driver didn't use it.
Signed-off-by: NMario Huettel <mario.huettel@gmx.net>
Tested-by: NQuentin Schulz <quentin.schulz@free-electrons.com>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

This patch adds the support of the PCAN-PCI Express FD boards made
by PEAK-System, for computers using the PCI Express slot.

The PCAN-PCI Express FD has one or two CAN FD channels, depending
on the model. A galvanic isolation of the CAN ports protects
the electronics of the card and the respective computer against
disturbances of up to 500 Volts. The PCAN-PCI Express FD can be operated
with ambient temperatures in a range of -40 to +85 °C.

Such boards run an extented version of the CAN-FD IP running into USB
CAN-FD interfaces from PEAK-System, so this patch adds several new commands
and their corresponding data types to the PEAK CAN-FD common definitions
header file too.
Signed-off-by: NStephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

The CAN-FD IP from PEAK-System runs into several kinds of PC CAN-FD
interfaces. Up to now, only the USB CAN-FD adapters were supported by
the Kernel. In order to prepare the adding of some new non-USB CAN-FD
interfaces, this patch moves - and rename - the IP definitions file
from its private (usb) sub-directory into a - newly created - CAN specific
one.
Signed-off-by: NStephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

Fixes the usage of the const qualifier in the memory pointer arguments
of the declared inline functions. By changing the line containing "const",
this patch also changes the name of the arg into a more usual one.
Signed-off-by: NStephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

This patch fixes the wrong usage of a specific USB data type into a common
header file. This common header file is intended to define the common data
types and values that define access to the PEAK-System CAN-FD IP, whatever
the PC interface is.
Signed-off-by: NStephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

Doing a full 64-bit decomposition is really stupid especially for
simple values like 0 and -1.

But if we are going to optimize this, go all the way and try for all 2
and 3 instruction sequences not requiring a temporary register as
well.

First we do the easy cases where it's a zero or sign extended 32-bit
number (sethi+or, sethi+xor, respectively).

Then we try to find a range of set bits we can load simply then shift
up into place, in various ways.

Then we try negating the constant and see if we can do a simple
sequence using that with a xor at the end.  (f.e. the range of set
bits can't be loaded simply, but for the negated value it can)

The final optimized strategy involves 4 instructions sequences not
needing a temporary register.

Otherwise we sadly fully decompose using a temp..

Example, from ALU64_XOR_K: 0x0000ffffffff0000 ^ 0x0 = 0x0000ffffffff0000:

0000000000000000 <foo>:
   0:   9d e3 bf 50     save  %sp, -176, %sp
   4:   01 00 00 00     nop
   8:   90 10 00 18     mov  %i0, %o0
   c:   13 3f ff ff     sethi  %hi(0xfffffc00), %o1
  10:   92 12 63 ff     or  %o1, 0x3ff, %o1     ! ffffffff <foo+0xffffffff>
  14:   93 2a 70 10     sllx  %o1, 0x10, %o1
  18:   15 3f ff ff     sethi  %hi(0xfffffc00), %o2
  1c:   94 12 a3 ff     or  %o2, 0x3ff, %o2     ! ffffffff <foo+0xffffffff>
  20:   95 2a b0 10     sllx  %o2, 0x10, %o2
  24:   92 1a 60 00     xor  %o1, 0, %o1
  28:   12 e2 40 8a     cxbe  %o1, %o2, 38 <foo+0x38>
  2c:   9a 10 20 02     mov  2, %o5
  30:   10 60 00 03     b,pn   %xcc, 3c <foo+0x3c>
  34:   01 00 00 00     nop
  38:   9a 10 20 01     mov  1, %o5     ! 1 <foo+0x1>
  3c:   81 c7 e0 08     ret
  40:   91 eb 40 00     restore  %o5, %g0, %o0
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

cbcond combines a compare with a branch into a single instruction.

The limitations are:

1) Only newer chips support it

2) For immediate compares we are limited to 5-bit signed immediate
   values

3) The branch displacement is limited to 10-bit signed

4) We cannot use it for JSET

Also, cbcond (unlike all other sparc control transfers) lacks a delay
slot.

Currently we don't have a useful instruction we can push into the
delay slot of normal branches.  So using cbcond pretty much always
increases code density, and is therefore a win.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Alexander Alemayhu says:

====================
Misc BPF cleanup

while looking into making the Makefile in samples/bpf better handle O= I saw
several warnings when running `make clean && make samples/bpf/`. This series
reduces those warnings.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fixes the following warning

samples/bpf/test_lru_dist.c:28:0: warning: "offsetof" redefined
 #define offsetof(TYPE, MEMBER) ((size_t)&((TYPE *)0)->MEMBER)

In file included from ./tools/lib/bpf/bpf.h:25:0,
                 from samples/bpf/libbpf.h:5,
                 from samples/bpf/test_lru_dist.c:24:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stddef.h:417:0: note: this is the location of the previous definition
 #define offsetof(TYPE, MEMBER) __builtin_offsetof (TYPE, MEMBER)
Signed-off-by: NAlexander Alemayhu <alexander@alemayhu.com>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fixes the following warning

samples/bpf/cookie_uid_helper_example.c: At top level:
samples/bpf/cookie_uid_helper_example.c:276:6: warning: no previous prototype for ‘finish’ [-Wmissing-prototypes]
 void finish(int ret)
      ^~~~~~
  HOSTLD  samples/bpf/per_socket_stats_example
Signed-off-by: NAlexander Alemayhu <alexander@alemayhu.com>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

I was initially going to remove '-Wno-address-of-packed-member' because I
thought it was not supposed to be there but Daniel suggested using
'-Wno-unknown-warning-option'.

This silences several warnings similiar to the one below

warning: unknown warning option '-Wno-address-of-packed-member' [-Wunknown-warning-option]
1 warning generated.
clang  -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/6.3.1/include -I./arch/x86/include -I./arch/x86/include/generated/uapi -I./arch/x86/include/generated  -I./include
 -I./arch/x86/include/uapi -I./include/uapi -I./include/generated/uapi -include ./include/linux/kconfig.h  \
        -D__KERNEL__ -D__ASM_SYSREG_H -Wno-unused-value -Wno-pointer-sign \
        -Wno-compare-distinct-pointer-types \
        -Wno-gnu-variable-sized-type-not-at-end \
        -Wno-address-of-packed-member -Wno-tautological-compare \
        -O2 -emit-llvm -c samples/bpf/xdp_tx_iptunnel_kern.c -o -| llc -march=bpf -filetype=obj -o samples/bpf/xdp_tx_iptunnel_kern.o

$ clang --version

 clang version 3.9.1 (tags/RELEASE_391/final)
 Target: x86_64-unknown-linux-gnu
 Thread model: posix
 InstalledDir: /usr/bin
Signed-off-by: NAlexander Alemayhu <alexander@alemayhu.com>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now that also the last in-tree user of the xdp_adjust_head bit has
been removed, we can remove the flag from struct bpf_prog altogether.

This, at the same time, also makes sure that any future driver for
XDP comes with bpf_xdp_adjust_head() support right away.

A rejection based on this flag would also mean that tail calls
couldn't be used with such driver as per c2002f98 ("bpf: fix
checking xdp_adjust_head on tail calls") fix, thus lets not allow
for it in the first place.
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Function pci_find_ext_capability() may return 0, which is an invalid
address. In function qlcnic_sriov_virtid_fn(), its return value is used
without validation. This may result in invalid memory access bugs. This
patch fixes the bug.
Signed-off-by: NPan Bian <bianpan2016@163.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In function pc300_pci_init_one(), on the ioremap error path, function
pc300_pci_remove_one() is called to free the allocated memory. However,
the path is not terminated, and the freed memory will be used later,
resulting in use-after-free bugs. This path fixes the bug.
Signed-off-by: NPan Bian <bianpan2016@163.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Function nlmsg_new() will return a NULL pointer if there is no enough
memory, and its return value should be checked before it is used.
However, in function tipc_nl_node_get_monitor(), the validation of the
return value of function nlmsg_new() is missed. This patch fixes the
bug.
Signed-off-by: NPan Bian <bianpan2016@163.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Function nla_nest_start() may return a NULL pointer on error. However,
in function lwtunnel_fill_encap(), the return value of nla_nest_start()
is not validated before it is used. This patch checks the return value
of nla_nest_start() against NULL.
Signed-off-by: NPan Bian <bianpan2016@163.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
nfp: DMA flags, adjust head and fixes

This series takes advantage of Alex's DMA_ATTR_SKIP_CPU_SYNC to make
XDP packet modifications "correct" from DMA API point of view.  It
also allows us to parse the metadata before we run XDP at no additional
DMA sync cost.  That way we can get rid of the metadata memcpy, and
remove the last upstream user of bpf_prog->xdp_adjust_head.

David's patch adds a way to read capabilities from the management
firmware.

There are also two net-next fixes.  Patch 4 which fixes what seems to
be a result of a botched rebase on my part.  Patch 5 corrects locking
when state of ethernet ports is being refreshed.

v3: move the sync from alloc func to the actual give to hw func
v2: sync rx buffers before giving them to the card (Alex)
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The code refreshing the eth port state was trying to update state
of all ports of the card.  Unfortunately to safely walk the port
list we would have to hold the port lock, which we can't due to
lock ordering constraints against rtnl.

Make the per-port sync refresh and async refresh of all ports
completely separate routines.

Fixes: 172f638c ("nfp: add port state refresh")
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

XDP headroom should not be included in free list buffer size.

Fixes: 6fe0c3b4 ("nfp: add support for xdp_adjust_head()")
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Retrieve identifying information from the NSP.  For now it only
contains versions of firmware subcomponents.
Signed-off-by: NDavid Brunecz <david.brunecz@netronome.com>
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Calling memcpy to shift metadata out of the way for XDP to run
seems like an overkill.  The most common metadata contents are
8 bytes containing type and flow hash.  Simply parse the metadata
before we run XDP.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

DMA unmap may destroy changes CPU made to the buffer.  To make XDP
run correctly on non-x86 platforms we should use the
DMA_ATTR_SKIP_CPU_SYNC attribute.

Thanks to using the attribute we can now push the sync operation to the
common code path from XDP handler.

A little bit of variable name reshuffling is required to bring the
code back to readable state.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Benjamin LaHaise says:

====================
flower: add MPLS matching support

This patch series adds support for parsing MPLS flows in the flow dissector
and the flower classifier.  Each of the MPLS TTL, BOS, TC and Label fields
can be used for matching.

v2: incorporate style feedback, move #defines to linux/include/mpls.h
Note: this omits Jiri's request to remove tabs between the type and
field names in struct declarations.  This would be inconsistent with
numerous other struct definitions.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support to the tc flower classifier to match based on fields in MPLS
labels (TTL, Bottom of Stack, TC field, Label).
Signed-off-by: NBenjamin LaHaise <benjamin.lahaise@netronome.com>
Signed-off-by: NBenjamin LaHaise <bcrl@kvack.org>
Reviewed-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Simon Horman <simon.horman@netronome.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Hadar Hen Zion <hadarh@mellanox.com>
Cc: Gao Feng <fgao@ikuai8.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support for parsing MPLS flows to the flow dissector in preparation for
adding MPLS match support to cls_flower.
Signed-off-by: NBenjamin LaHaise <benjamin.lahaise@netronome.com>
Signed-off-by: NBenjamin LaHaise <bcrl@kvack.org>
Reviewed-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Simon Horman <simon.horman@netronome.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Eric Dumazet <jhs@mojatatu.com>
Cc: Hadar Hen Zion <hadarh@mellanox.com>
Cc: Gao Feng <fgao@ikuai8.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>