can: m_can: Configuration for TX and TX event FIFOs

* TX/TX Event FIFO sizes are configured for version >= v3.1.x
Signed-off-by: NMario Huettel <mario.huettel@gmx.net>
Tested-by: NQuentin Schulz <quentin.schulz@free-electrons.com>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

drivers/net/can/m_can/m_can.c

@@ -382,6 +382,18 @@ static inline void m_can_fifo_write(const struct m_can_priv *priv,
 	       fpi * TXB_ELEMENT_SIZE + offset);
 }
 
+static inline u32 m_can_txe_fifo_read(const struct m_can_priv *priv,
+				      u32 fgi,
+				      u32 offset) {
+	return readl(priv->mram_base + priv->mcfg[MRAM_TXE].off +
+			fgi * TXE_ELEMENT_SIZE + offset);
+}
+
+static inline bool m_can_tx_fifo_full(const struct m_can_priv *priv)
+{
+		return !!(m_can_read(priv, M_CAN_TXFQS) & TXFQS_TFQF);
+}
+
 static inline void m_can_config_endisable(const struct m_can_priv *priv,
 					  bool enable)
 {
@@ -925,6 +937,7 @@ static int m_can_set_bittiming(struct net_device *dev)
  * - configure rx fifo
  * - accept non-matching frame into fifo 0
  * - configure tx buffer
+ *		- >= v3.1.x: TX FIFO is used
  * - configure mode
  * - setup bittiming
  */
@@ -941,15 +954,31 @@ static void m_can_chip_config(struct net_device *dev)
 	/* Accept Non-matching Frames Into FIFO 0 */
 	m_can_write(priv, M_CAN_GFC, 0x0);
 
-	/* only support one Tx Buffer currently */
-	m_can_write(priv, M_CAN_TXBC, (1 << TXBC_NDTB_SHIFT) |
-		    priv->mcfg[MRAM_TXB].off);
+	if (priv->version == 30) {
+		/* only support one Tx Buffer currently */
+		m_can_write(priv, M_CAN_TXBC, (1 << TXBC_NDTB_SHIFT) |
+				priv->mcfg[MRAM_TXB].off);
+	} else {
+		/* TX FIFO is used for newer IP Core versions */
+		m_can_write(priv, M_CAN_TXBC,
+			    (priv->mcfg[MRAM_TXB].num << TXBC_TFQS_SHIFT) |
+			    (priv->mcfg[MRAM_TXB].off));
+	}
 
 	/* support 64 bytes payload */
 	m_can_write(priv, M_CAN_TXESC, TXESC_TBDS_64BYTES);
 
-	m_can_write(priv, M_CAN_TXEFC, (1 << TXEFC_EFS_SHIFT) |
-		    priv->mcfg[MRAM_TXE].off);
+	/* TX Event FIFO */
+	if (priv->version == 30) {
+		m_can_write(priv, M_CAN_TXEFC, (1 << TXEFC_EFS_SHIFT) |
+				priv->mcfg[MRAM_TXE].off);
+	} else {
+		/* Full TX Event FIFO is used */
+		m_can_write(priv, M_CAN_TXEFC,
+			    ((priv->mcfg[MRAM_TXE].num << TXEFC_EFS_SHIFT)
+			     & TXEFC_EFS_MASK) |
+			    priv->mcfg[MRAM_TXE].off);
+	}
 
 	/* rx fifo configuration, blocking mode, fifo size 1 */
 	m_can_write(priv, M_CAN_RXF0C,