Move the udc headers to the proper home in
arch/arm/plat-s3c24xx/include/plat ready to clean out
the old include directories.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Move regs-ac97.h to arch/arm/plat-s3c/include/plat ready
to clean out old include directories.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Move nand headers to arch/arm/plat-s3c/include/plat
ready to clean out the old include directories.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Move regs-rtc.h to arch/arm/plat-s3c/include/plat ready
to clean out old include directories.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Move the i2c headers to arch/arm/plat-s3c/include/plat
ready to clean out the old include directories.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Move  regs-watchdog.h to arch/arm/plat-s3c/include/plat ready
to clean out the old include directories
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

To avoid using stale asm-offsets.h.
Signed-off-by: NXiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Common halt logic was changed by x86 and did not update ia64.  This patch
updates halt for ia64.

Fixes a regression causing guests to hang with more than 2 vcpus.
Signed-off-by: NXiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Every call of kvm_set_irq() should offer an irq_source_id, which is
allocated by kvm_request_irq_source_id(). Based on irq_source_id, we
identify the irq source and implement logical OR for shared level
interrupts.

The allocated irq_source_id can be freed by kvm_free_irq_source_id().

Currently, we support at most sizeof(unsigned long) different irq sources.

[Amit: - rebase to kvm.git HEAD
       - move definition of KVM_USERSPACE_IRQ_SOURCE_ID to common file
       - move kvm_request_irq_source_id to the update_irq ioctl]

[Xiantao: - Add kvm/ia64 stuff and make it work for kvm/ia64 guests]
Signed-off-by: NSheng Yang <sheng@linux.intel.com>
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NXiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

The pvmmu TLB flush handler should request a root sync, similarly to
a native read-write CR3.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

The s390 kernel does not compile if virtio console is enabled, but guest
support is disabled:

  LD      .tmp_vmlinux1
arch/s390/kernel/built-in.o: In function `setup_arch':
/space/linux-2.5/arch/s390/kernel/setup.c:773: undefined reference to
`s390_virtio_console_init'

The fix is related to
commit 99e65c92
Author: Christian Borntraeger <borntraeger@de.ibm.com>
Date:   Fri Jul 25 15:50:04 2008 +0200
    KVM: s390: Fix guest kconfig

Which changed the build process to build kvm_virtio.c only if CONFIG_S390_GUEST
is set. We must ifdef the prototype in the header file accordingly.
Reported-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

We got a stack overflow with a small stack configuration on a 32 bit
system. It just looks like as 4kb isn't enough and too dangerous.
So lets get rid of 4kb stacks on 32 bit.

But one thing I completely dislike about the call trace below is that
just for debugging or tracing purposes sprintf gets called (cio_start_key):

	/* process condition code */
	sprintf(dbf_txt, "ccode:%d", ccode);
	CIO_TRACE_EVENT(4, dbf_txt);

But maybe its just me who thinks that this could be done better.

    <4>Kernel stack overflow.
    <4>Modules linked in: dm_multipath sunrpc bonding qeth_l2 dm_mod qeth ccwgroup vmur
    <4>CPU: 1 Not tainted 2.6.27-30.x.20081015-s390default #1
    <4>Process httpd (pid: 3807, task: 20ae2df8, ksp: 1666fb78)
    <4>Krnl PSW : 040c0000 8027098a (number+0xe/0x348)
    <4>           R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:0 CC:0 PM:0
    <4>Krnl GPRS: 00d43318 0027097c 1666f277 9666f270
    <4>           00000000 00000000 0000000a ffffffff
    <4>           9666f270 1666f228 1666f277 1666f098
    <4>           00000002 80270982 80271016 1666f098
    <4>Krnl Code: 8027097e: f0340dd0a7f1	srp	3536(4,%r0),2033(%r10),4
    <4>           80270984: 0f00		clcl	%r0,%r0
    <4>           80270986: a7840001		brc	8,80270988
    <4>          >8027098a: 18ef		lr	%r14,%r15
    <4>           8027098c: a7faff68		ahi	%r15,-152
    <4>           80270990: 18bf		lr	%r11,%r15
    <4>           80270992: 18a2		lr	%r10,%r2
    <4>           80270994: 1893		lr	%r9,%r3

Modified calltrace with annotated stackframe size of each function:

stackframe size
    |
 0 304 vsnprintf+850 [0x271016]
 1  72 sprintf+74 [0x271522]
 2  56 cio_start_key+262 [0x2d4c16]
 3  56 ccw_device_start_key+222 [0x2dfe92]
 4  56 ccw_device_start+40 [0x2dff28]
 5  48 raw3215_start_io+104 [0x30b0f8]
 6  56 raw3215_write+494 [0x30ba0a]
 7  40 con3215_write+68 [0x30bafc]
 8  40 __call_console_drivers+146 [0x12b0fa]
 9  32 _call_console_drivers+102 [0x12b192]
10  64 release_console_sem+268 [0x12b614]
11 168 vprintk+462 [0x12bca6]
12  72 printk+68 [0x12bfd0]
13 256 __print_symbol+50 [0x15a882]
14  56 __show_trace+162 [0x103d06]
15  32 show_trace+224 [0x103e70]
16  48 show_stack+152 [0x103f20]
17  56 dump_stack+126 [0x104612]
18  96 __alloc_pages_internal+592 [0x175004]
19  80 cache_alloc_refill+776 [0x196f3c]
20  40 __kmalloc+258 [0x1972ae]
21  40 __alloc_skb+94 [0x328086]
22  32 pskb_copy+50 [0x328252]
23  32 skb_realloc_headroom+110 [0x328a72]
24 104 qeth_l2_hard_start_xmit+378 [0x7803bfde]
25  56 dev_hard_start_xmit+450 [0x32ef6e]
26  56 __qdisc_run+390 [0x3425d6]
27  48 dev_queue_xmit+410 [0x331e06]
28  40 ip_finish_output+308 [0x354ac8]
29  56 ip_output+218 [0x355b6e]
30  24 ip_local_out+56 [0x354584]
31 120 ip_queue_xmit+300 [0x355cec]
32  96 tcp_transmit_skb+812 [0x367da8]
33  40 tcp_push_one+158 [0x369fda]
34 112 tcp_sendmsg+852 [0x35d5a0]
35 240 sock_sendmsg+164 [0x32035c]
36  56 kernel_sendmsg+86 [0x32064a]
37  88 sock_no_sendpage+98 [0x322b22]
38 104 tcp_sendpage+70 [0x35cc1e]
39  48 sock_sendpage+74 [0x31eb66]
40  64 pipe_to_sendpage+102 [0x1c4b2e]
41  64 __splice_from_pipe+120 [0x1c5340]
42  72 splice_from_pipe+90 [0x1c57e6]
43  56 generic_splice_sendpage+38 [0x1c5832]
44  48 do_splice_from+104 [0x1c4c38]
45  48 direct_splice_actor+52 [0x1c4c88]
46  80 splice_direct_to_actor+180 [0x1c4f80]
47  72 do_splice_direct+70 [0x1c5112]
48  64 do_sendfile+360 [0x19de18]
49  72 sys_sendfile64+126 [0x19df32]
50 336 sysc_do_restart+18 [0x111a1a]
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

allyesconfig and allmodconfig built kernels have a tape IPL record.
A the vmreader record makes much more sense, since hardly anybody will
ever IPL a kernel from tape. So change the default.
As I side effect I can test these kernels without fiddling around with
the kernel config ;)
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

unsigned ops->size cannot be negative
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Use sysdev_class_create_file() to create create sysdev class attributes
instead of sysfs_create_file(). Using sysfs_create_file() wasn't a very
good idea since the show and store functions have a different amount of
parameters for sysfs files and sysdev class files.
In particular the pointer to the buffer is the last argument and
therefore accesses to random memory regions happened.
Still worked surprisingly well until we got a kernel panic.

Cc: stable@kernel.org
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

The current enable_sie code sets the mm->context.pgstes bit to tell
dup_mm that the new mm should have extended page tables. This bit is also
used by the s390 specific page table primitives to decide about the page
table layout - which means context.pgstes has two meanings. This can cause
any kind of bugs. For example  - e.g. shrink_zone can call
ptep_clear_flush_young while enable_sie is running. ptep_clear_flush_young
will test for context.pgstes. Since enable_sie changed that value of the old
struct mm without changing the page table layout ptep_clear_flush_young will
do the wrong thing.
The solution is to split pgstes into two bits
- one for the allocation
- one for the current state
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Impact: fix crash with memory hotplug

Shuahua Li found:

| I just did some experiments on a desktop for memory hotplug and this bug
| triggered a crash in my test.
|
| Yinghai's suggestion also fixed the bug.

We don't need to round it, just remove that extra -1
Signed-off-by: NYinghai <yinghai@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: get correct page count in /proc/meminfo

found page count in /proc/meminfo is nor correct on 1G system in VirtualBox 2.0.4

# cat /proc/meminfo
MemTotal:        1017508 kB
MemFree:          822700 kB
Buffers:            1456 kB
Cached:            26632 kB
SwapCached:            0 kB
...
Hugepagesize:       2048 kB
DirectMap4k:      4032 kB
DirectMap2M:  18446744073709549568 kB

with this patch get:
...
DirectMap4k:      4032 kB
DirectMap2M:   1044480 kB

which is consistent to kernel_page_tables
---[ Low Kernel Mapping ]---
0xffff880000000000-0xffff880000001000           4K     RW     PCD     GLB x  pte
0xffff880000001000-0xffff88000009f000         632K     RW             GLB x  pte
0xffff88000009f000-0xffff8800000a0000           4K     RW     PCD     GLB x  pte
0xffff8800000a0000-0xffff880000200000        1408K     RW             GLB x  pte
0xffff880000200000-0xffff88003fe00000        1020M     RW         PSE GLB x  pmd
0xffff88003fe00000-0xffff88003fff0000        1984K     RW             GLB NX pte
0xffff88003fff0000-0xffff880040000000          64K                           pte
0xffff880040000000-0xffff888000000000         511G                           pud
0xffff888000000000-0xffffc20000000000       58880G                           pgd
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Acked-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NZhang Le <r0bertz@gentoo.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

When booting Linux on a txx9 board with VxWorks boot loader, it crashes in
prom_getenv(), as VxWorks doesn't pass firmware parameters in a0-a3 (in my
case, the actual leftover values in these registers were 0x80002000,
0x80001fe0, 0x2000, and 0x20).

Make the parsing of argc, argv, and envp a bit more robust by checking if
argc is a number below CKSEG0, and argv/envp point to CKSEG0.
Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Acked-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NShinya Kuribayashi <shinya.kuribayashi@necel.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

These functions are completely ineffective.
Signed-off-by: NShinya Kuribayashi <shinya.kuribayashi@necel.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Remove runtime db_* macros as we don't need them any more.  In general,
such helpers are useful for initial porting, but once approved, they are
not indispensable.
Signed-off-by: NShinya Kuribayashi <shinya.kuribayashi@necel.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Current EMMA2RH irq code is mess.  Before cleaning it up, gather them
in one place as a first step.
Signed-off-by: NShinya Kuribayashi <shinya.kuribayashi@necel.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Let's use immediate value, instead.  This also saves memory footprint,
and probably a little bit faster.
Signed-off-by: NShinya Kuribayashi <shinya.kuribayashi@necel.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Let's use immediate value, instead.  This also saves memory footprint,
and probably a little bit faster.
Signed-off-by: NShinya Kuribayashi <shinya.kuribayashi@necel.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Let's use immediate value, instead.  This also saves memory footprint,
and probably a little bit faster.
Signed-off-by: NShinya Kuribayashi <shinya.kuribayashi@necel.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

It's totally a waste of CPU cycles.
Signed-off-by: NShinya Kuribayashi <shinya.kuribayashi@necel.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

We'll put all EMMA related headers there in the future.
Signed-off-by: NShinya Kuribayashi <shinya.kuribayashi@necel.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

git mv arch/mips/{emma2rh,emma} and fixups Makefiles.  We'll put all NEC
EMMA series based machines there in the future.
Signed-off-by: NShinya Kuribayashi <shinya.kuribayashi@necel.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

- Move EMMA related stuff into arch/mips/emma/Kconfig
- Create CONFIG_SOC_EMMA* to handle more EMMA SoCs effectively
- Rename CONFIG_MARKEINS into CONFIG_NEC_MARKEINS
Signed-off-by: NShinya Kuribayashi <shinya.kuribayashi@necel.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

We already have sufficient infrastructure to support VR5500 and VR5500A
series processors.  Here's a Makefile support to make it selectable by
ports, and enable it for NEC EMMA2RH Markeins board.

This patch also fixes a confused target help, and adds 1Gb PageMask bits
supported by VR5500 and its variants.
Signed-off-by: NShinya Kuribayashi <shinya.kuribayashi@necel.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The following patch add support for the NXP PNX833x SOC.  More
specifically it adds support for the STB222/5 variant. It fixes
the vectored interrupt issue.
Signed-off-by: Ndaniel.j.laird <daniel.j.laird@nxp.com>
Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Fix a typo in the comment for the TOSHIBA_RBTX4939 config option
Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Acked-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

In file included from include/linux/ptrace.h:49,
                 from arch/mips/kernel/kgdb.c:25:
/home/yuasa/src/linux/test/mips/linux/arch/mips/include/asm/ptrace.h:123: error: expected declaration specifiers or '...' before '__s64'
/home/yuasa/src/linux/test/mips/linux/arch/mips/include/asm/ptrace.h:124: error: expected declaration specifiers or '...' before '__s64'
/home/yuasa/src/linux/test/mips/linux/arch/mips/include/asm/ptrace.h:126: error: expected declaration specifiers or '...' before '__u32'
/home/yuasa/src/linux/test/mips/linux/arch/mips/include/asm/ptrace.h:127: error: expected declaration specifiers or '...' before '__u32'
make[1]: *** [arch/mips/kernel/kgdb.o] Error 1
Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The following functions

disable_local1_irq()
disable_local2_irq()
disable_local3_irq()

are needlessly defined global, so make them static. While at it, fix a
whitespace error in the same file.
Signed-off-by: NDmitri Vorobiev <dmitri.vorobiev@movial.fi>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Add smc91x platform device to RBTX4939 board and some hacks for big endian.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Add sysfs interface for 7 segment LED and implement access routine for
RBTX4939.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>