提交 542c1020 编写于 作者: S Shinya Kuribayashi 提交者: Ralf Baechle

MIPS: Add CONFIG_CPU_R5500 for NEC VR5500 series processors

We already have sufficient infrastructure to support VR5500 and VR5500A
series processors.  Here's a Makefile support to make it selectable by
ports, and enable it for NEC EMMA2RH Markeins board.

This patch also fixes a confused target help, and adds 1Gb PageMask bits
supported by VR5500 and its variants.
Signed-off-by: NShinya Kuribayashi <shinya.kuribayashi@necel.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
上级 bc4c4e83
......@@ -249,10 +249,9 @@ config MARKEINS
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_HAS_CPU_R5000
select SYS_HAS_CPU_R5500
help
This enables support for the R5432-based NEC Mark-eins
boards with R5500 CPU.
This enables support for the NEC Mark-eins board with VR5500 CPU.
config MACH_VR41XX
bool "NEC VR4100 series based machines"
......@@ -1123,6 +1122,16 @@ config CPU_R5432
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
config CPU_R5500
bool "R5500"
depends on SYS_HAS_CPU_R5500
select CPU_HAS_LLSC
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
help
NEC VR5500 and VR5500A series processors implement 64-bit MIPS IV
instruction set.
config CPU_R6000
bool "R6000"
depends on EXPERIMENTAL
......@@ -1233,6 +1242,9 @@ config SYS_HAS_CPU_R5000
config SYS_HAS_CPU_R5432
bool
config SYS_HAS_CPU_R5500
bool
config SYS_HAS_CPU_R6000
bool
......
......@@ -131,6 +131,8 @@ cflags-$(CONFIG_CPU_MIPS64_R2) += $(call cc-option,-march=mips64r2,-mips64r2 -U_
cflags-$(CONFIG_CPU_R5000) += -march=r5000 -Wa,--trap
cflags-$(CONFIG_CPU_R5432) += $(call cc-option,-march=r5400,-march=r5000) \
-Wa,--trap
cflags-$(CONFIG_CPU_R5500) += $(call cc-option,-march=r5500,-march=r5000) \
-Wa,--trap
cflags-$(CONFIG_CPU_NEVADA) += $(call cc-option,-march=rm5200,-march=r5000) \
-Wa,--trap
cflags-$(CONFIG_CPU_RM7000) += $(call cc-option,-march=rm7000,-march=r5000) \
......
......@@ -192,6 +192,7 @@
#define PM_16M 0x01ffe000
#define PM_64M 0x07ffe000
#define PM_256M 0x1fffe000
#define PM_1G 0x7fffe000
#endif
......
......@@ -98,6 +98,8 @@ search_module_dbetables(unsigned long addr)
#define MODULE_PROC_FAMILY "R5000 "
#elif defined CONFIG_CPU_R5432
#define MODULE_PROC_FAMILY "R5432 "
#elif defined CONFIG_CPU_R5500
#define MODULE_PROC_FAMILY "R5500 "
#elif defined CONFIG_CPU_R6000
#define MODULE_PROC_FAMILY "R6000 "
#elif defined CONFIG_CPU_NEVADA
......
......@@ -33,6 +33,7 @@ obj-$(CONFIG_CPU_R4X00) += r4k_fpu.o r4k_switch.o
obj-$(CONFIG_CPU_R5000) += r4k_fpu.o r4k_switch.o
obj-$(CONFIG_CPU_R6000) += r6000_fpu.o r4k_switch.o
obj-$(CONFIG_CPU_R5432) += r4k_fpu.o r4k_switch.o
obj-$(CONFIG_CPU_R5500) += r4k_fpu.o r4k_switch.o
obj-$(CONFIG_CPU_R8000) += r4k_fpu.o r4k_switch.o
obj-$(CONFIG_CPU_RM7000) += r4k_fpu.o r4k_switch.o
obj-$(CONFIG_CPU_RM9000) += r4k_fpu.o r4k_switch.o
......
......@@ -18,6 +18,7 @@ obj-$(CONFIG_CPU_R4300) += dump_tlb.o
obj-$(CONFIG_CPU_R4X00) += dump_tlb.o
obj-$(CONFIG_CPU_R5000) += dump_tlb.o
obj-$(CONFIG_CPU_R5432) += dump_tlb.o
obj-$(CONFIG_CPU_R5500) += dump_tlb.o
obj-$(CONFIG_CPU_R6000) +=
obj-$(CONFIG_CPU_R8000) +=
obj-$(CONFIG_CPU_RM7000) += dump_tlb.o
......
......@@ -25,6 +25,7 @@ static inline const char *msk2str(unsigned int mask)
case PM_16M: return "16Mb";
case PM_64M: return "64Mb";
case PM_256M: return "256Mb";
case PM_1G: return "1Gb";
#endif
}
return "";
......
......@@ -19,6 +19,7 @@ obj-$(CONFIG_CPU_R4300) += c-r4k.o cex-gen.o tlb-r4k.o
obj-$(CONFIG_CPU_R4X00) += c-r4k.o cex-gen.o tlb-r4k.o
obj-$(CONFIG_CPU_R5000) += c-r4k.o cex-gen.o tlb-r4k.o
obj-$(CONFIG_CPU_R5432) += c-r4k.o cex-gen.o tlb-r4k.o
obj-$(CONFIG_CPU_R5500) += c-r4k.o cex-gen.o tlb-r4k.o
obj-$(CONFIG_CPU_R8000) += c-r4k.o cex-gen.o tlb-r8k.o
obj-$(CONFIG_CPU_RM7000) += c-r4k.o cex-gen.o tlb-r4k.o
obj-$(CONFIG_CPU_RM9000) += c-r4k.o cex-gen.o tlb-r4k.o
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册