Pull MMC updates from Ulf Hansson:
 "It's been an busy period for mmc. Quite some changes in the mmc core,
  two new mmc host drivers, some existing drivers being extended to
  support new IP versions and lots of other updates.

  MMC core:
   - Delete eMMC packed command support
   - Introduce mmc_abort_tuning() to enable eMMC tuning to fail
     gracefully
   - Introduce mmc_can_retune() to see if a host can be retuned
   - Re-work and improve the sequence when sending a CMD6 for mmc
   - Enable CDM13 polling when switching to HS and HS DDR mode for mmc
   - Relax checking for CMD6 errors after switch to HS200
   - Re-factoring the code dealing with the mmc block queue
   - Recognize whether the eMMC card supports CMDQ
   - Fix 4K native sector check
   - Don't power off the card when starting the host
   - Increase MMC_IOC_MAX_BYTES to support bigger firmware binaries
   - Improve error handling and drop meaningless BUG_ONs()
   - Lots of clean-ups and changes to improve the quality of the code

  MMC host:
   - sdhci: Fix tuning sequence and clean-up the related code
   - sdhci: Add support to via DT override broken SDHCI cap register
     bits
   - sdhci-cadence: Add new driver for Cadence SD4HC SDHCI variant
   - sdhci-msm: Update clock management
   - sdhci-msm: Add support for eMMC HS400 mode
   - sdhci-msm: Deploy runtime/system PM support
   - sdhci-iproc: Extend driver support to newer IP versions
   - sdhci-pci: Add support for Intel GLK
   - sdhci-pci: Add support for Intel NI byt sdio
   - sdhci-acpi: Add support for 80860F14 UID 2 SDIO bus
   - sdhci: Lots of various small improvements and clean-ups
   - tmio: Add support for tuning
   - sh_mobile_sdhi: Add support for tuning
   - sh_mobile_sdhi: Extend driver to support SDHI IP on R7S72100 SoC
   - sh_mobile_sdhi: remove support for sh7372
   - davinci: Use mmc_of_parse() to enable generic mmc DT bindings
   - meson: Add new driver to support GX platforms
   - dw_mmc: Deploy generic runtime/system PM support
   - dw_mmc: Lots of various small improvements

  As a part of the mmc changes this time, I have also pulled in an
  immutable branch/tag (soc-device-match-tag1) hosted by Geert
  Uytterhoeven, to share the implementation of the new
  soc_device_match() interface. This is needed by these mmc related
  changes:

   - mmc: sdhci-of-esdhc: Get correct IP version for T4240-R1.0-R2.0
   - soc: fsl: add GUTS driver for QorIQ platforms"

* tag 'mmc-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (136 commits)
  mmc: sdhci-cadence: add Cadence SD4HC support
  mmc: sdhci: export sdhci_execute_tuning()
  mmc: sdhci: Tidy tuning loop
  mmc: sdhci: Simplify tuning block size logic
  mmc: sdhci: Factor out tuning helper functions
  mmc: sdhci: Use mmc_abort_tuning()
  mmc: mmc: Introduce mmc_abort_tuning()
  mmc: sdhci: Always allow tuning to fall back to fixed sampling
  mmc: sdhci: Fix tuning reset after exhausting the maximum number of loops
  mmc: sdhci: Fix recovery from tuning timeout
  Revert "mmc: sdhci: Reset cmd and data circuits after tuning failure"
  mmc: mmc: Relax checking for switch errors after HS200 switch
  mmc: sdhci-acpi: support 80860F14 UID 2 SDIO bus
  mmc: sdhci-of-at91: remove bogus MMC_SDHCI_IO_ACCESSORS select
  mmc: sdhci-pci: Use ACPI to get max frequency for Intel NI byt sdio
  mmc: sdhci-pci: Add PCI ID for Intel NI byt sdio
  mmc: sdhci-s3c: add spin_unlock_irq() before calling clk_round_rate
  mmc: dw_mmc: display the clock message only one time when card is polling
  mmc: dw_mmc: add the debug message for polling and non-removable
  mmc: dw_mmc: check the "present" variable before checking flags
  ...

Pull regulator updates from Mark Brown:
 "A quiet release for the regulator API, conference season must've been
  slowing everyone down:

   - a new interface allowing drivers to provide an interface for
     reading a more detailed description of error conditions which
     allows devices using these regulators to build

   - ACPI support for the fixed voltage regulator.

   - cleanups for the TI TWL drivers to reduce code duplication"

* tag 'regulator-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (24 commits)
  regulator: tps65086: Fix 25mV ranges for BUCK regulators 1, 2, and 6
  regulator: Fix regulator_get_error_flags() signature mismatch
  regulator: core: add newline in debug message
  regulator: tps65086: Fix 25mV ranges for BUCK regulators
  regulator: core: Correct type of mode in regulator_mode_constrain
  regulator: max77620: add documentation for MPOK property
  regulator: max77620: add support to configure MPOK
  regulator: twl6030: Remove unused fields from struct twlreg_info
  regulator: twl: Remove unused fields from struct twlreg_info
  regulator: twl: split twl6030 logic into its own file
  regulator: twl: kill unused functions
  regulator: twl: make driver DT only
  regulator: twl-regulator: rework fixed regulator definition
  regulator: max77620: remove unused variable
  regulator: pwm: Add missing quotes to DT example
  regulator: stw481x-vmmc: fix ages old enable error
  regulator: gpio: properly check return value of of_get_named_gpio
  regulator: lp873x: Add support for populating input supply
  regulator: axp20x: Fix axp809 ldo_io registration error on cold boot
  regulators: helpers: Fix handling of bypass_val_on in get_bypass_regmap
  ...

Pull regmap fixlet from Mark Brown:
 "The only change for regmap this merge window is a single fix for an
  unused variable"

* tag 'regmap-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: cache: Remove unused 'blksize' variable

Pull LED updates from Jacek Anaszewski:

 - userspace LED class driver - it can be useful for testing triggers
   and can also be used to implement virtual LEDs

 - LED class driver for NIC78bx device

 - LED core fixes for preventing potential races while setting
   brightness when software blinking is enabled

 - improvements in LED documentation to mention semantics on changing
   brightness while trigger is active

* tag 'leds_for_4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
  leds: pca955x: Add ACPI support
  leds: netxbig: fix module autoload for OF registration
  leds: pca963x: Add ACPI support
  leds: leds-cobalt-raq: use builtin_platform_driver
  led: core: Fix blink_brightness setting race
  led: core: Use atomic bit-field for the blink-flags
  leds: Add user LED driver for NIC78bx device
  leds: verify vendor and change license in mlxcpld driver
  leds: pca963x: enable low-power state
  leds: pca9532: Use default trigger value from platform data
  leds: pca963x: workaround group blink scaling issue
  cleanup LED documentation and make it match reality
  leds: lp3952: Export I2C module alias information for module autoload
  leds: mc13783: Fix MC13892 keypad led access
  ledtrig-cpu.c: fix english
  leds/leds-lp5523.txt: make documentation match reality
  tools/leds: Add uledmon program for monitoring userspace LEDs
  leds: Use macro for max device node name size
  leds: Introduce userspace LED class driver
  mfd: qcom-pm8xxx: Clean up PM8XXX namespace

Pull pinctrl updates from Linus Walleij:
 "Bulk pin control changes for the v4.10 kernel cycle:

  No core changes this time. Mainly gradual improvement and
  feature growth in the drivers.

  New drivers:

   - New driver for TI DA850/OMAP-L138/AM18XX pinconf

   - The SX150x was moved over from the GPIO subsystem and reimagined as
     a pin control driver with GPIO support in a joint effort by three
     independent users of this hardware. The result was amazingly good!

   - New subdriver for the Oxnas OX820

  Improvements:

   - The sunxi driver now supports the generic pin control bindings
     rather than the sunxi-specific. Add debouncing support to the
     driver.

   - Simplifications in pinctrl-single adding a generic parser.

   - Two downstream fixes and move the Raspberry Pi BCM2835 over to use
     the generic GPIOLIB_IRQCHIP"

* tag 'pinctrl-v4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (92 commits)
  pinctrl: sx150x: use new nested IRQ infrastructure
  pinctrl: sx150x: handle missing 'advanced' reg in sx1504 and sx1505
  pinctrl: sx150x: rename 'reg_advance' to 'reg_advanced'
  pinctrl: sx150x: access the correct bits in the 4-bit regs of sx150[147]
  pinctrl: mt8173: set GPIO16 to usb iddig mode
  pinctrl: bcm2835: switch to GPIOLIB_IRQCHIP
  pinctrl: New driver for TI DA850/OMAP-L138/AM18XX pinconf
  devicetree: bindings: pinctrl: Add binding for ti,da850-pupd
  Documentation: pinctrl: palmas: Add ti,palmas-powerhold-override property definition
  pinctrl: intel: set default handler to be handle_bad_irq()
  pinctrl: sx150x: add support for sx1501, sx1504, sx1505 and sx1507
  pinctrl: sx150x: sort chips by part number
  pinctrl: sx150x: use correct registers for reg_sense (sx1502 and sx1508)
  pinctrl: imx: fix imx_pinctrl_desc initialization
  pinctrl: sx150x: support setting multiple pins at once
  pinctrl: sx150x: various spelling fixes and some white-space cleanup
  pinctrl: mediatek: use builtin_platform_driver
  pinctrl: stm32: use builtin_platform_driver
  pinctrl: sunxi: Testing the wrong variable
  pinctrl: nomadik: split up and comments MC0 pins
  ...

Pull GPIO updates from Luinus Walleij:
 "Bulk GPIO changes for the v4.10 kernel cycle:

  Core changes:

   - Simplify threaded interrupt handling: instead of passing numbed
     parameters to gpiochip_irqchip_add_chained() we create a new call:
     gpiochip_irqchip_add_nested() so the two types are clearly
     semantically different. Also make sure that all nested chips call
     gpiochip_set_nested_irqchip() which is necessary for IRQ resend to
     work properly if it happens.

   - Return error on seek operations for the chardev.

   - Clamp values set as part of gpio[d]_direction_output() so that
     anything != 0 will be send down to the driver as "1" not the value
     passed in.

   - ACPI can now support naming of GPIO lines, hogs and holes in the
     GPIO lists.

  New drivers:

   - The SX150x driver was deemed unfit for the GPIO subsystem and was
     moved over to a combined GPIO+pinctrl driver in the pinctrl
     subsystem.

  New features:

   - Various cleanups to various drivers"

* tag 'gpio-v4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (49 commits)
  gpio: merrifield: Implement gpio_get_direction callback
  gpio: merrifield: Add support for hardware debouncer
  gpio: chardev: Return error for seek operations
  gpio: arizona: Tidy up probe error path
  gpio: arizona: Remove pointless set of platform drvdata
  gpio: pl061: delete platform data handling
  gpio: pl061: move platform data into driver
  gpio: pl061: rename variable from chip to pl061
  gpio: pl061: rename state container struct
  gpio: pl061: use local state for parent IRQ storage
  gpio: set explicit nesting on drivers
  gpio: simplify adding threaded interrupts
  gpio: vf610: use builtin_platform_driver
  gpio: axp209: use correct register for GPIO input status
  gpio: stmpe: fix interrupt handling bug
  gpio: em: depnd on ARCH_SHMOBILE
  gpio: zx: depend on ARCH_ZX
  gpio: x86: update config dependencies for x86 specific hardware
  gpio: mb86s7x: use builtin_platform_driver
  gpio: etraxfs: use builtin_platform_driver
  ...

Pull documentation update from Jonathan Corbet:
 "These are the documentation changes for 4.10.

  It's another busy cycle for the docs tree, as the sphinx conversion
  continues. Highlights include:

   - Further work on PDF output, which remains a bit of a pain but
     should be more solid now.

   - Five more DocBook template files converted to Sphinx. Only 27 to
     go... Lots of plain-text files have also been converted and
     integrated.

   - Images in binary formats have been replaced with more
     source-friendly versions.

   - Various bits of organizational work, including the renaming of
     various files discussed at the kernel summit.

   - New documentation for the device_link mechanism.

  ... and, of course, lots of typo fixes and small updates"

* tag 'docs-4.10' of git://git.lwn.net/linux: (193 commits)
  dma-buf: Extract dma-buf.rst
  Update Documentation/00-INDEX
  docs: 00-INDEX: document directories/files with no docs
  docs: 00-INDEX: remove non-existing entries
  docs: 00-INDEX: add missing entries for documentation files/dirs
  docs: 00-INDEX: consolidate process/ and admin-guide/ description
  scripts: add a script to check if Documentation/00-INDEX is sane
  Docs: change sh -> awk in REPORTING-BUGS
  Documentation/core-api/device_link: Add initial documentation
  core-api: remove an unexpected unident
  ppc/idle: Add documentation for powersave=off
  Doc: Correct typo, "Introdution" => "Introduction"
  Documentation/atomic_ops.txt: convert to ReST markup
  Documentation/local_ops.txt: convert to ReST markup
  Documentation/assoc_array.txt: convert to ReST markup
  docs-rst: parse-headers.pl: cleanup the documentation
  docs-rst: fix media cleandocs target
  docs-rst: media/Makefile: reorganize the rules
  docs-rst: media: build SVG from graphviz files
  docs-rst: replace bayer.png by a SVG image
  ...

Merge updates from Andrew Morton:

 - various misc bits

 - most of MM (quite a lot of MM material is awaiting the merge of
   linux-next dependencies)

 - kasan

 - printk updates

 - procfs updates

 - MAINTAINERS

 - /lib updates

 - checkpatch updates

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (123 commits)
  init: reduce rootwait polling interval time to 5ms
  binfmt_elf: use vmalloc() for allocation of vma_filesz
  checkpatch: don't emit unified-diff error for rename-only patches
  checkpatch: don't check c99 types like uint8_t under tools
  checkpatch: avoid multiple line dereferences
  checkpatch: don't check .pl files, improve absolute path commit log test
  scripts/checkpatch.pl: fix spelling
  checkpatch: don't try to get maintained status when --no-tree is given
  lib/ida: document locking requirements a bit better
  lib/rbtree.c: fix typo in comment of ____rb_erase_color
  lib/Kconfig.debug: make CONFIG_STRICT_DEVMEM depend on CONFIG_DEVMEM
  MAINTAINERS: add drm and drm/i915 irc channels
  MAINTAINERS: add "C:" for URI for chat where developers hang out
  MAINTAINERS: add drm and drm/i915 bug filing info
  MAINTAINERS: add "B:" for URI where to file bugs
  get_maintainer: look for arbitrary letter prefixes in sections
  printk: add Kconfig option to set default console loglevel
  printk/sound: handle more message headers
  printk/btrfs: handle more message headers
  printk/kdb: handle more message headers
  ...

.c and .h source files should not be executable, change
the permissions to 0644.

[ This would normally go through Andrew Morton, but his ancient
  patch-based toolchain doesn't do permission changes ]
Signed-off-by: NJoe Perches <joe@perches.com>
Acked-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull irq updates from Thomas Gleixner:
 "The irq department provides:

   - a major update to the auto affinity management code, which is used
     by multi-queue devices

   - move of the microblaze irq chip driver into the common driver code
     so it can be shared between microblaze, powerpc and MIPS

   - a series of updates to the ARM GICV3 interrupt controller

   - the usual pile of fixes and small improvements all over the place"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
  powerpc/virtex: Use generic xilinx irqchip driver
  irqchip/xilinx: Try to fall back if xlnx,kind-of-intr not provided
  irqchip/xilinx: Add support for parent intc
  irqchip/xilinx: Rename get_irq to xintc_get_irq
  irqchip/xilinx: Restructure and use jump label api
  irqchip/xilinx: Clean up print messages
  microblaze/irqchip: Move intc driver to irqchip
  ARM: virt: Select ARM_GIC_V3_ITS
  ARM: gic-v3-its: Add 32bit support to GICv3 ITS
  irqchip/gic-v3-its: Specialise readq and writeq accesses
  irqchip/gic-v3-its: Specialise flush_dcache operation
  irqchip/gic-v3-its: Narrow down Entry Size when used as a divider
  irqchip/gic-v3-its: Change unsigned types for AArch32 compatibility
  irqchip/gic-v3: Use nops macro for Cavium ThunderX erratum 23154
  irqchip/gic-v3: Convert arm64 GIC accessors to {read,write}_sysreg_s
  genirq/msi: Drop artificial PCI dependency
  irqchip/bcm7038-l1: Implement irq_cpu_offline() callback
  genirq/affinity: Use default affinity mask for reserved vectors
  genirq/affinity: Take reserved vectors into account when spreading irqs
  PCI: Remove the irq_affinity mask from struct pci_dev
  ...

Pull timer updates from Thomas Gleixner:
 "The time/timekeeping/timer folks deliver with this update:

   - Fix a reintroduced signed/unsigned issue and cleanup the whole
     signed/unsigned mess in the timekeeping core so this wont happen
     accidentaly again.

   - Add a new trace clock based on boot time

   - Prevent injection of random sleep times when PM tracing abuses the
     RTC for storage

   - Make posix timers configurable for real tiny systems

   - Add tracepoints for the alarm timer subsystem so timer based
     suspend wakeups can be instrumented

   - The usual pile of fixes and updates to core and drivers"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
  timekeeping: Use mul_u64_u32_shr() instead of open coding it
  timekeeping: Get rid of pointless typecasts
  timekeeping: Make the conversion call chain consistently unsigned
  timekeeping_Force_unsigned_clocksource_to_nanoseconds_conversion
  alarmtimer: Add tracepoints for alarm timers
  trace: Update documentation for mono, mono_raw and boot clock
  trace: Add an option for boot clock as trace clock
  timekeeping: Add a fast and NMI safe boot clock
  timekeeping/clocksource_cyc2ns: Document intended range limitation
  timekeeping: Ignore the bogus sleep time if pm_trace is enabled
  selftests/timers: Fix spelling mistake "Asyncrhonous" -> "Asynchronous"
  clocksource/drivers/bcm2835_timer: Unmap region obtained by of_iomap
  clocksource/drivers/arm_arch_timer: Map frame with of_io_request_and_map()
  arm64: dts: rockchip: Arch counter doesn't tick in system suspend
  clocksource/drivers/arm_arch_timer: Don't assume clock runs in suspend
  posix-timers: Make them configurable
  posix_cpu_timers: Move the add_device_randomness() call to a proper place
  timer: Move sys_alarm from timer.c to itimer.c
  ptp_clock: Allow for it to be optional
  Kconfig: Regenerate *.c_shipped files after previous changes
  ...

Pull smp hotplug updates from Thomas Gleixner:
 "This is the final round of converting the notifier mess to the state
  machine. The removal of the notifiers and the related infrastructure
  will happen around rc1, as there are conversions outstanding in other
  trees.

  The whole exercise removed about 2000 lines of code in total and in
  course of the conversion several dozen bugs got fixed. The new
  mechanism allows to test almost every hotplug step standalone, so
  usage sites can exercise all transitions extensively.

  There is more room for improvement, like integrating all the
  pointlessly different architecture mechanisms of synchronizing,
  setting cpus online etc into the core code"

* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits)
  tracing/rb: Init the CPU mask on allocation
  soc/fsl/qbman: Convert to hotplug state machine
  soc/fsl/qbman: Convert to hotplug state machine
  zram: Convert to hotplug state machine
  KVM/PPC/Book3S HV: Convert to hotplug state machine
  arm64/cpuinfo: Convert to hotplug state machine
  arm64/cpuinfo: Make hotplug notifier symmetric
  mm/compaction: Convert to hotplug state machine
  iommu/vt-d: Convert to hotplug state machine
  mm/zswap: Convert pool to hotplug state machine
  mm/zswap: Convert dst-mem to hotplug state machine
  mm/zsmalloc: Convert to hotplug state machine
  mm/vmstat: Convert to hotplug state machine
  mm/vmstat: Avoid on each online CPU loops
  mm/vmstat: Drop get_online_cpus() from init_cpu_node_state/vmstat_cpu_dead()
  tracing/rb: Convert to hotplug state machine
  oprofile/nmi timer: Convert to hotplug state machine
  net/iucv: Use explicit clean up labels in iucv_init()
  x86/pci/amd-bus: Convert to hotplug state machine
  x86/oprofile/nmi: Convert to hotplug state machine
  ...

For several devices, the rootwait time is sensitive because it directly
affects booting time.  The polling interval of rootwait is currently
100ms.  To save unnessesary waiting time, reduce the polling interval to
5 ms.

[akpm@linux-foundation.org: remove used-once #define]
Link: http://lkml.kernel.org/r/20161207060743.1728-1-js07.lee@samsung.comSigned-off-by: NJungseung Lee <js07.lee@samsung.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We have observed page allocations failures of order 4 during core dump
while trying to allocate vma_filesz.  This results in a useless core
file of size 0.  To improve reliability use vmalloc().

Note that the vmalloc() allocation is bounded by sysctl_max_map_count,
which is 65,530 by default.  So with a 4k page size, and 8 bytes per
seg, this is a max of 128 pages or an order 7 allocation.  Other parts
of the core dump path, such as fill_files_note() are already using
vmalloc() for presumably similar reasons.

Link: http://lkml.kernel.org/r/1479745791-17611-1-git-send-email-jbaron@akamai.comSigned-off-by: NJason Baron <jbaron@akamai.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I generated a patch with `git format-patch` which checkpatch thinks is
invalid:

    $ ./scripts/checkpatch.pl lpc-dt/0006-mfd-dt-Move-syscon-bindings-to-syscon-subdirectory.patch
    WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
     Documentation/devicetree/bindings/mfd/{ => syscon}/aspeed-scu.txt         | 0

    ERROR: Does not appear to be a unified-diff format patch

    total: 1 errors, 1 warnings, 0 lines checked

    NOTE: For some of the reported defects, checkpatch may be able to
          mechanically convert to the typical style using --fix or --fix-inplace.

    lpc-dt/0006-mfd-dt-Move-syscon-bindings-to-syscon-subdirectory.patch has style problems, please review.

    NOTE: If any of the errors are false positives, please report
          them to the maintainer, see CHECKPATCH in MAINTAINERS.

The patch in question was all renames with no edits, giving 100%
similarity and thus no diff markers.

Set '$is_patch = 1;' in the add/remove/rename detection to avoid
generating spurious warnings.

Link: http://lkml.kernel.org/r/20161205232224.22685-1-andrew@aj.id.auSigned-off-by: NAndrew Jeffery <andrew@aj.id.au>
Acked-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Tools contains user space code so uintX_t types are just fine.

Link: http://lkml.kernel.org/r/1479286379-853-1-git-send-email-tomas.winkler@intel.comSigned-off-by: NTomas Winkler <tomas.winkler@intel.com>
Acked-by: NJoe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Code that puts a single dereferencing identifier on multiple lines like:

     struct_identifier->member[index].
	member = <foo>;

is generally hard to follow.

Prefer that dereferencing identifiers be single line.

Link: http://lkml.kernel.org/r/e9c191ae3f41bedc8ffd5c0fbcc5a1cec1d1d2df.1478120869.git.joe@perches.comSigned-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

perl files (*.pl) are mostly inappropriate to check coding styles so
exempt them from long line checks and various .[ch] file type tests.

And as well, only scan absolute paths in the commit log, not in the
patch.

Link: http://lkml.kernel.org/r/85b101d50acafe6c0261d9f7df283c827da52c4a.1477340110.git.joe@perches.comSigned-off-by: NJoe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

s/preceeded/preceded/

Cc: Joe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fixes the following warning:

  Use of uninitialized value $root in concatenation (.) or string at /path/to/checkpatch.pl line 764.

Link: http://lkml.kernel.org/r/1476719709-16668-1-git-send-email-jerome.forissier@linaro.orgSigned-off-by: NJerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: NBrian Norris <computersforpeace@gmail.com>
Acked-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I wanted to wrap a bunch of ida_simple_get calls into their own locking,
until I dug around and read the original commit message.  Stuff like
this should imo be added to the kernel doc, let's do that.

Link: http://lkml.kernel.org/r/20161027072216.20411-1-daniel.vetter@ffwll.chSigned-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Acked-by: NTejun Heo <tj@kernel.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In Case 3 of `sibling == parent->rb_right':

Right rotation will not change color of sl and S in the diagram
(i.e. should not change "sl" to "Sl", "S" to "s")

In Case 3 of `sibling == parent->rb_left':

     (p)           (p)
     / \           / \
    S   N    -->  sr  N
   / \           /
  Sl  sr        S
               /
              Sl

  This is actually left rotation at "S", not right rotation.

In Case 4 of `sibling == parent->rb_left':

     (p)             (s)
     / \             / \
    S   N     -->   Sl  P
   / \                 / \
  sl (sr)            (sr) N

  This is actually right rotation at "(p)" + color flips, not left
  rotation + color flips.

Link: http://lkml.kernel.org/r/1472391115-3702-1-git-send-email-fykcee1@gmail.comSigned-off-by: NJie Chen <fykcee1@gmail.com>
Cc: Wei Yang <weiyang@linux.vnet.ibm.com>
Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

With CONFIG_DEVMEM not set, CONFIG_STRICT_DEVMEM will be useless even if
it is set =y, thus let's update the dependency in Kconfig.

Link: http://lkml.kernel.org/r/20161006051217.GA31027@dhcp-128-65.nay.redhat.comSigned-off-by: NDave Young <dyoung@redhat.com>
Acked-by: NKees Cook <keescook@chromium.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Link: http://lkml.kernel.org/r/1476966135-26943-4-git-send-email-jani.nikula@intel.comSigned-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Make it easier to find the developer chat for the subsystem or driver.

Link: http://lkml.kernel.org/r/1476966135-26943-3-git-send-email-jani.nikula@intel.comSigned-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Link: http://lkml.kernel.org/r/1476966135-26943-2-git-send-email-jani.nikula@intel.comSigned-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Different subsystems and drivers have different preferences for where to
file bugs and what information to include.  Add "B:" entry for
specifying the URI for the bug tracker directly, a web page for detailed
info on filing bugs, or a mailto: URI.

Link: http://lkml.kernel.org/r/1476966135-26943-1-git-send-email-jani.nikula@intel.comSigned-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com>
Acked-by: NDaniel Vetter <daniel@ffwll.ch>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Jani Nikula proposes patches to add a few new letter prefixes for "B:"
bug reporting and "C:" maintainer chatting to the various sections of
MAINTAINERS.

Add a generic mechanism to get_maintainer.pl to find sections that have
any combination of "[A-Z]" letter prefix types in a section.

Link: http://lkml.kernel.org/r/1477332323.1984.8.camel@perches.comSigned-off-by: NJoe Perches <joe@perches.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add a configuration option to set the default console loglevel.  This
is, as before, still possible to override at runtime through bootargs
(loglevel=<x>), sysrq and /proc/printk.

There are cases where adding additional arguments on the commandline is
impractical, and changing the default for the kernel when being built
makes more sense.  Provide such a method here, for those who choose to
do so.

Also, while touching this code, clarify the difference between
MESSAGE_LOGLEVEL_DEFAULT and CONSOLE_LOGLEVEL_DEFAULT.

Link: http://lkml.kernel.org/r/1479676829-30031-1-git-send-email-olof@lixom.netSigned-off-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 4bcc595c ("printk: reinstate KERN_CONT for printing
continuation lines") allows to define more message headers for a single
message.  The motivation is that continuous lines might get mixed.
Therefore it make sense to define the right log level for every piece of
a cont line.

This patch allows to copy only the real message level.  We should ignore
KERN_CONT because <filename:line> is added for each message.  By other
words, we want to know where each piece of the line comes from.

[pmladek@suse.com: fix a check of the valid message level]
  Link: http://lkml.kernel.org/r/20161111183444.GE2145@dhcp128.suse.cz
Link: http://lkml.kernel.org/r/1478695291-12169-5-git-send-email-pmladek@suse.comSigned-off-by: NPetr Mladek <pmladek@suse.com>
Cc: Joe Perches <joe@perches.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <jbacik@fb.com>
Cc: David Sterba <dsterba@suse.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 4bcc595c ("printk: reinstate KERN_CONT for printing
continuation lines") allows to define more message headers for a single
message.  The motivation is that continuous lines might get mixed.
Therefore it make sense to define the right log level for every piece of
a cont line.

The current btrfs_printk() macros do not support continuous lines at the
moment.  But better be prepared for a custom messages and avoid
potential "lvl" buffer overflow.

This patch iterates over the entire message header.  It is interested
only into the message level like the original code.

This patch also introduces PRINTK_MAX_SINGLE_HEADER_LEN.  Three bytes
are enough for the message level header at the moment.  But it used to
be three, see the commit 04d2c8c8 ("printk: convert the format for
KERN_<LEVEL> to a 2 byte pattern").

Also I fixed the default ratelimit level.  It looked very strange when it
was different from the default log level.

[pmladek@suse.com: Fix a check of the valid message level]
  Link: http://lkml.kernel.org/r/20161111183236.GD2145@dhcp128.suse.cz
Link: http://lkml.kernel.org/r/1478695291-12169-4-git-send-email-pmladek@suse.comSigned-off-by: NPetr Mladek <pmladek@suse.com>
Acked-by: NDavid Sterba <dsterba@suse.com>
Cc: Joe Perches <joe@perches.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <jbacik@fb.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 4bcc595c ("printk: reinstate KERN_CONT for printing
continuation lines") allows to define more message headers for a single
message.  The motivation is that continuous lines might get mixed.
Therefore it make sense to define the right log level for every piece of
a cont line.

This patch introduces printk_skip_headers() that will skip all headers
and uses it in the kdb code instead of printk_skip_level().

This approach helps to fix other printk_skip_level() users
independently.

Link: http://lkml.kernel.org/r/1478695291-12169-3-git-send-email-pmladek@suse.comSigned-off-by: NPetr Mladek <pmladek@suse.com>
Cc: Joe Perches <joe@perches.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <jbacik@fb.com>
Cc: David Sterba <dsterba@suse.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 4bcc595c ("printk: reinstate KERN_CONT for printing
continuation lines") added back KERN_CONT message header.  As a result
it might appear in the middle of the line when the parts are squashed
via the temporary NMI buffer.

A reasonable solution seems to be to split the text in the NNI temporary
not only by newlines but also by the message headers.

Another solution would be to filter out KERN_CONT when writing to the
temporary buffer.  But this would complicate the lockless handling.
Also it would not solve problems with a missing newline that was there
even before the KERN_CONT stuff.

This patch moves the temporary buffer handling into separate function.
I played with it and it seems that using the char pointers make the code
easier to read.

Also it prints the final newline as a continuous line.

Finally, it moves handling of the s->len overflow into the paranoid
check.  And allows to recover from the disaster.

Link: http://lkml.kernel.org/r/1478695291-12169-2-git-send-email-pmladek@suse.comSigned-off-by: NPetr Mladek <pmladek@suse.com>
Reviewed-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Joe Perches <joe@perches.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <jbacik@fb.com>
Cc: David Sterba <dsterba@suse.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

vsnprintf() adds the trailing '\0' but it does not count it into the
number of printed characters.  The result is that there is one byte less
space for the real characters in the buffer.

The broken check for the free space might cause that we will repeatedly
try to print 1 character into the buffer, never reach the full buffer,
and do not count the messages as missed.

Also vsnprintf() returns the number of characters that would be printed
if the buffer was big enough.  As a result, s->len might be bigger than
the size of the buffer[*].  And the printk() function might return
bigger len than it really printed.  Both problems are fixed by using
vscnprintf() instead.

Note that I though about increasing the number of missed messages even
when the message was shrunken.  But it made the code even more
complicated.  I think that it is not worth it.  Shrunken messages are
usually easy to recognize.  And it should be a corner case.

[*] The overflown s->len value is crazy and unexpected.  I "made a
mistake" and reported this situation as an internal error when fixed
handling of PR_CONT headers in some other patch.

Link: http://lkml.kernel.org/r/20161208174912.GA17042@linux.suseSigned-off-by: NPetr Mladek <pmladek@suse.com>
CcL Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Chris Mason <clm@fb.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Joe Perches <joe@perches.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Takashi Iwai <tiwai@suse.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Link: http://lkml.kernel.org/r/1477894241.1103202.772260161.1B0A5995@webmail.messagingengine.comSigned-off-by: NBenjamin Peterson <bp@benjamin.pe>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since sysctl_hung_task_warnings == -1 is allowed (infinite warnings),
commit 48a6d64e ("hung_task: allow hung_task_panic when
hung_task_warnings is 0") should decrement it only when it is not -1.

This prevents the kernel from ceasing warnings after the first
4294967295 ;)
Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: John Siddle <jsiddle@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Runtime nlink calculation works but meh.  I don't know how to do it at
compile time, but I know how to do it at init time.

Shift "2+" part into init time as a bonus.

Link: http://lkml.kernel.org/r/20161122195549.GB29812@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: NVegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Comparison for "<" works equally well as comparison for "<=" but one
SUB/LEA is saved (no, it is not optimised away, at least here).

Link: http://lkml.kernel.org/r/20161122195143.GA29812@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

format_decode and vsnprintf occasionally show up in perf top, so I went
looking for places that might not need the full printf power.  With the
help of kprobes, I gathered some statistics on which format strings we
mostly pass to vsnprintf.  On a trivial desktop workload, I hit "%x" 25%
of the time, so something apparently reads /proc/pid/status (which does
5*16 printf("%x") calls) a lot.

With this patch, reading /proc/pid/status is 30% faster according to
this microbenchmark:

	char buf[4096];
	int i, fd;
	for (i = 0; i < 10000; ++i) {
		fd = open("/proc/self/status", O_RDONLY);
		read(fd, buf, sizeof(buf));
		close(fd);
	}

Link: http://lkml.kernel.org/r/1474410485-1305-1-git-send-email-linux@rasmusvillemoes.dkSigned-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: NAndrei Vagin <avagin@openvz.org>
Acked-by: NKees Cook <keescook@chromium.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Some comments were obsoleted since commit 05c0ae21 ("try a saner
locking for pde_opener...").

Some new comments added.

Some confusing comments replaced with equally confusing ones.

Link: http://lkml.kernel.org/r/20161029160231.GD1246@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>