Merge tag 'gpio-v4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Luinus Walleij:
 "Bulk GPIO changes for the v4.10 kernel cycle:

  Core changes:

   - Simplify threaded interrupt handling: instead of passing numbed
     parameters to gpiochip_irqchip_add_chained() we create a new call:
     gpiochip_irqchip_add_nested() so the two types are clearly
     semantically different. Also make sure that all nested chips call
     gpiochip_set_nested_irqchip() which is necessary for IRQ resend to
     work properly if it happens.

   - Return error on seek operations for the chardev.

   - Clamp values set as part of gpio[d]_direction_output() so that
     anything != 0 will be send down to the driver as "1" not the value
     passed in.

   - ACPI can now support naming of GPIO lines, hogs and holes in the
     GPIO lists.

  New drivers:

   - The SX150x driver was deemed unfit for the GPIO subsystem and was
     moved over to a combined GPIO+pinctrl driver in the pinctrl
     subsystem.

  New features:

   - Various cleanups to various drivers"

* tag 'gpio-v4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (49 commits)
  gpio: merrifield: Implement gpio_get_direction callback
  gpio: merrifield: Add support for hardware debouncer
  gpio: chardev: Return error for seek operations
  gpio: arizona: Tidy up probe error path
  gpio: arizona: Remove pointless set of platform drvdata
  gpio: pl061: delete platform data handling
  gpio: pl061: move platform data into driver
  gpio: pl061: rename variable from chip to pl061
  gpio: pl061: rename state container struct
  gpio: pl061: use local state for parent IRQ storage
  gpio: set explicit nesting on drivers
  gpio: simplify adding threaded interrupts
  gpio: vf610: use builtin_platform_driver
  gpio: axp209: use correct register for GPIO input status
  gpio: stmpe: fix interrupt handling bug
  gpio: em: depnd on ARCH_SHMOBILE
  gpio: zx: depend on ARCH_ZX
  gpio: x86: update config dependencies for x86 specific hardware
  gpio: mb86s7x: use builtin_platform_driver
  gpio: etraxfs: use builtin_platform_driver
  ...

Documentation/acpi/gpio-properties.txt

@@ -51,6 +51,68 @@ it to 1 marks the GPIO as active low.
 In our Bluetooth example the "reset-gpios" refers to the second GpioIo()
 resource, second pin in that resource with the GPIO number of 31.
 
+It is possible to leave holes in the array of GPIOs. This is useful in
+cases like with SPI host controllers where some chip selects may be
+implemented as GPIOs and some as native signals. For example a SPI host
+controller can have chip selects 0 and 2 implemented as GPIOs and 1 as
+native:
+
+  Package () {
+      "cs-gpios",
+      Package () {
+          ^GPIO, 19, 0, 0, // chip select 0: GPIO
+          0,               // chip select 1: native signal
+          ^GPIO, 20, 0, 0, // chip select 2: GPIO
+      }
+  }
+
+Other supported properties
+--------------------------
+
+Following Device Tree compatible device properties are also supported by
+_DSD device properties for GPIO controllers:
+
+- gpio-hog
+- output-high
+- output-low
+- input
+- line-name
+
+Example:
+
+  Name (_DSD, Package () {
+      // _DSD Hierarchical Properties Extension UUID
+      ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
+      Package () {
+          Package () {"hog-gpio8", "G8PU"}
+      }
+  })
+
+  Name (G8PU, Package () {
+      ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
+      Package () {
+          Package () {"gpio-hog", 1},
+          Package () {"gpios", Package () {8, 0}},
+          Package () {"output-high", 1},
+          Package () {"line-name", "gpio8-pullup"},
+      }
+  })
+
+- gpio-line-names
+
+Example:
+
+  Package () {
+      "gpio-line-names",
+      Package () {
+          "SPI0_CS_N", "EXP2_INT", "MUX6_IO", "UART0_RXD", "MUX7_IO",
+          "LVL_C_A1", "MUX0_IO", "SPI1_MISO"
+      }
+  }
+
+See Documentation/devicetree/bindings/gpio/gpio.txt for more information
+about these properties.
+
 ACPI GPIO Mappings Provided by Drivers
 --------------------------------------
 

Documentation/devicetree/bindings/gpio/gpio-sx150x.txt → Documentation/devicetree/bindings/pinctrl/pinctrl-sx150x.txt

 SEMTECH SX150x GPIO expander bindings
 
+Please refer to pinctrl-bindings.txt, ../gpio/gpio.txt, and
+../interrupt-controller/interrupts.txt for generic information regarding
+pin controller, GPIO, and interrupt bindings.
 
 Required properties:
-
-- compatible: should be "semtech,sx1506q",
+- compatible: should be one of :
+			"semtech,sx1506q",
 			"semtech,sx1508q",
 			"semtech,sx1509q",
 			"semtech,sx1502q".
 
 - reg: The I2C slave address for this device.
 
-- interrupt-parent: phandle of the parent interrupt controller.
-
-- interrupts: Interrupt specifier for the controllers interrupt.
-
 - #gpio-cells: Should be 2. The first cell is the GPIO number and the
 		second cell is used to specify optional parameters:
 		bit 0: polarity (0: normal, 1: inverted)
 
 - gpio-controller: Marks the device as a GPIO controller.
 
+Optional properties :
+- interrupt-parent: phandle of the parent interrupt controller.
+
+- interrupts: Interrupt specifier for the controllers interrupt.
+
 - interrupt-controller: Marks the device as a interrupt controller.
 
+- semtech,probe-reset: Will trigger a reset of the GPIO expander on probe,
+		only for sx1508q and sx1509q
+
 The GPIO expander can optionally be used as an interrupt controller, in
-which case it uses the default two cell specifier as described in
-Documentation/devicetree/bindings/interrupt-controller/interrupts.txt.
+which case it uses the default two cell specifier.
+
+Required properties for pin configuration sub-nodes:
+ - pins: List of pins to which the configuration applies.
+
+Optional properties for pin configuration sub-nodes:
+----------------------------------------------------
+ - bias-disable: disable any pin bias, except the OSCIO pin
+ - bias-pull-up: pull up the pin, except the OSCIO pin
+ - bias-pull-down: pull down the pin, except the OSCIO pin
+ - bias-pull-pin-default: use pin-default pull state, except the OSCIO pin
+ - drive-push-pull: drive actively high and low
+ - drive-open-drain: drive with open drain only for sx1508q and sx1509q and except the OSCIO pin
+ - output-low: set the pin to output mode with low level
+ - output-high: set the pin to output mode with high level
 
 Example:
 
-	i2c_gpio_expander@20{
+	i2c0gpio-expander@20{
 		#gpio-cells = <2>;
 		#interrupt-cells = <2>;
 		compatible = "semtech,sx1506q";
@@ -38,4 +58,12 @@ Example:
 
 		gpio-controller;
 		interrupt-controller;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio1_cfg_pins>;
+
+		gpio1_cfg_pins: gpio1-cfg {
+			pins = "gpio1";
+			bias-pull-up;
+		};
 	};

Documentation/gpio/driver.txt

@@ -175,8 +175,8 @@ The IRQ portions of the GPIO block are implemented using an irqchip, using
 the header <linux/irq.h>. So basically such a driver is utilizing two sub-
 systems simultaneously: gpio and irq.
 
-RT_FULL: GPIO driver should not use spinlock_t or any sleepable APIs
-(like PM runtime) as part of its irq_chip implementation on -RT.
+RT_FULL: a realtime compliant GPIO driver should not use spinlock_t or any
+sleepable APIs (like PM runtime) as part of its irq_chip implementation.
 - spinlock_t should be replaced with raw_spinlock_t [1].
 - If sleepable APIs have to be used, these can be done from the .irq_bus_lock()
   and .irq_bus_unlock() callbacks, as these are the only slowpath callbacks
@@ -185,33 +185,32 @@ RT_FULL: GPIO driver should not use spinlock_t or any sleepable APIs
 GPIO irqchips usually fall in one of two categories:
 
 * CHAINED GPIO irqchips: these are usually the type that is embedded on
-  an SoC. This means that there is a fast IRQ handler for the GPIOs that
+  an SoC. This means that there is a fast IRQ flow handler for the GPIOs that
   gets called in a chain from the parent IRQ handler, most typically the
-  system interrupt controller. This means the GPIO irqchip is registered
-  using irq_set_chained_handler() or the corresponding
-  gpiochip_set_chained_irqchip() helper function, and the GPIO irqchip
-  handler will be called immediately from the parent irqchip, while
-  holding the IRQs disabled. The GPIO irqchip will then end up calling
-  something like this sequence in its interrupt handler:
-
-  static irqreturn_t tc3589x_gpio_irq(int irq, void *data)
+  system interrupt controller. This means that the GPIO irqchip handler will
+  be called immediately from the parent irqchip, while holding the IRQs
+  disabled. The GPIO irqchip will then end up calling something like this
+  sequence in its interrupt handler:
+
+  static irqreturn_t foo_gpio_irq(int irq, void *data)
       chained_irq_enter(...);
       generic_handle_irq(...);
       chained_irq_exit(...);
 
   Chained GPIO irqchips typically can NOT set the .can_sleep flag on
-  struct gpio_chip, as everything happens directly in the callbacks.
+  struct gpio_chip, as everything happens directly in the callbacks: no
+  slow bus traffic like I2C can be used.
 
   RT_FULL: Note, chained IRQ handlers will not be forced threaded on -RT.
   As result, spinlock_t or any sleepable APIs (like PM runtime) can't be used
   in chained IRQ handler.
-  if required (and if it can't be converted to the nested threaded GPIO irqchip)
-  - chained IRQ handler can be converted to generic irq handler and this way
-  it will be threaded IRQ handler on -RT and hard IRQ handler on non-RT
+  If required (and if it can't be converted to the nested threaded GPIO irqchip)
+  a chained IRQ handler can be converted to generic irq handler and this way
+  it will be a threaded IRQ handler on -RT and a hard IRQ handler on non-RT
   (for example, see [3]).
   Know W/A: The generic_handle_irq() is expected to be called with IRQ disabled,
-  so IRQ core will complain if it will be called from IRQ handler which is
-  forced thread. The "fake?" raw lock can be used to W/A this problem:
+  so the IRQ core will complain if it is called from an IRQ handler which is
+  forced to a thread. The "fake?" raw lock can be used to W/A this problem:
 
 	raw_spinlock_t wa_lock;
 	static irqreturn_t omap_gpio_irq_handler(int irq, void *gpiobank)
@@ -243,7 +242,7 @@ GPIO irqchips usually fall in one of two categories:
   by the driver. The hallmark of this driver is to call something like
   this in its interrupt handler:
 
-  static irqreturn_t tc3589x_gpio_irq(int irq, void *data)
+  static irqreturn_t foo_gpio_irq(int irq, void *data)
       ...
       handle_nested_irq(irq);
 
@@ -256,23 +255,31 @@ associated irqdomain and resource allocation callbacks, the gpiolib has
 some helpers that can be enabled by selecting the GPIOLIB_IRQCHIP Kconfig
 symbol:
 
-* gpiochip_irqchip_add(): adds an irqchip to a gpiochip. It will pass
+* gpiochip_irqchip_add(): adds a chained irqchip to a gpiochip. It will pass
   the struct gpio_chip* for the chip to all IRQ callbacks, so the callbacks
   need to embed the gpio_chip in its state container and obtain a pointer
   to the container using container_of().
   (See Documentation/driver-model/design-patterns.txt)
 
-  If there is a need to exclude certain GPIOs from the IRQ domain, one can
-  set .irq_need_valid_mask of the gpiochip before gpiochip_add_data() is
-  called. This allocates .irq_valid_mask with as many bits set as there are
-  GPIOs in the chip. Drivers can exclude GPIOs by clearing bits from this
-  mask. The mask must be filled in before gpiochip_irqchip_add() is called.
+* gpiochip_irqchip_add_nested(): adds a nested irqchip to a gpiochip.
+  Apart from that it works exactly like the chained irqchip.
 
 * gpiochip_set_chained_irqchip(): sets up a chained irq handler for a
   gpio_chip from a parent IRQ and passes the struct gpio_chip* as handler
   data. (Notice handler data, since the irqchip data is likely used by the
-  parent irqchip!) This is for the chained type of chip. This is also used
-  to set up a nested irqchip if NULL is passed as handler.
+  parent irqchip!).
+
+* gpiochip_set_nested_irqchip(): sets up a nested irq handler for a
+  gpio_chip from a parent IRQ. As the parent IRQ has usually been
+  explicitly requested by the driver, this does very little more than
+  mark all the child IRQs as having the other IRQ as parent.
+
+If there is a need to exclude certain GPIOs from the IRQ domain, you can
+set .irq_need_valid_mask of the gpiochip before gpiochip_add_data() is
+called. This allocates an .irq_valid_mask with as many bits set as there
+are GPIOs in the chip. Drivers can exclude GPIOs by clearing bits from this
+mask. The mask must be filled in before gpiochip_irqchip_add() or
+gpiochip_irqchip_add_nested() is called.
 
 To use the helpers please keep the following in mind:
 
@@ -323,6 +330,9 @@ When implementing an irqchip inside a GPIO driver, these two functions should
 typically be called in the .startup() and .shutdown() callbacks from the
 irqchip.
 
+When using the gpiolib irqchip helpers, these callback are automatically
+assigned.
+
 Real-Time compliance for GPIO IRQ chips
 ---------------------------------------
 

arch/arm/mach-integrator/impd1.c

@@ -21,7 +21,6 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
 #include <linux/amba/mmci.h>
-#include <linux/amba/pl061.h>
 #include <linux/io.h>
 #include <linux/platform_data/clk-integrator.h>
 #include <linux/slab.h>

drivers/gpio/Kconfig

@@ -167,7 +167,7 @@ config GPIO_DWAPB
 
 config GPIO_EM
 	tristate "Emma Mobile GPIO"
-	depends on ARM && OF_GPIO
+	depends on (ARCH_EMEV2 || COMPILE_TEST) && OF_GPIO
 	help
 	  Say yes here to support GPIO on Renesas Emma Mobile SoCs.
 
@@ -451,7 +451,7 @@ config GPIO_VR41XX
 
 config GPIO_VX855
 	tristate "VIA VX855/VX875 GPIO"
-	depends on PCI
+	depends on (X86 || COMPILE_TEST) && PCI
 	select MFD_CORE
 	select MFD_VX855
 	help
@@ -520,6 +520,7 @@ config GPIO_ZYNQ
 
 config GPIO_ZX
 	bool "ZTE ZX GPIO support"
+	depends on ARCH_ZX || COMPILE_TEST
 	select GPIOLIB_IRQCHIP
 	help
 	  Say yes here to support the GPIO device on ZTE ZX SoCs.
@@ -603,7 +604,7 @@ config GPIO_IT87
 
 config GPIO_SCH
 	tristate "Intel SCH/TunnelCreek/Centerton/Quark X1000 GPIO"
-	depends on PCI
+	depends on (X86 || COMPILE_TEST) && PCI
 	select MFD_CORE
 	select LPC_SCH
 	help
@@ -777,16 +778,13 @@ config GPIO_PCF857X
 	  platform-neutral GPIO calls.
 
 config GPIO_SX150X
-	bool "Semtech SX150x I2C GPIO expander"
-	depends on I2C=y
-	select GPIOLIB_IRQCHIP
+	bool "Semtech SX150x I2C GPIO expander (deprecated)"
+	depends on PINCTRL && I2C=y
+	select PINCTRL_SX150X
 	default n
 	help
-	  Say yes here to provide support for Semtech SX150-series I2C
-	  GPIO expanders. Compatible models include:
-
-	  8 bits:  sx1508q
-	  16 bits: sx1509q
+	  Say yes here to provide support for Semtech SX150x-series I2C
+	  GPIO expanders. The GPIO driver was replaced by a Pinctrl version.
 
 config GPIO_TPIC2810
 	tristate "TPIC2810 8-Bit I2C GPO expander"
@@ -798,6 +796,7 @@ config GPIO_TPIC2810
 
 config GPIO_TS4900
 	tristate "Technologic Systems FPGA I2C GPIO"
+	depends on SOC_IMX6 || COMPILE_TEST
 	select REGMAP_I2C
 	help
 	  Say yes here to enabled the GPIO driver for Technologic's FPGA core.
@@ -814,6 +813,14 @@ config GPIO_ADP5520
 	  This option enables support for on-chip GPIO found
 	  on Analog Devices ADP5520 PMICs.
 
+config GPIO_ALTERA_A10SR
+	tristate "Altera Arria10 System Resource GPIO"
+	depends on MFD_ALTERA_A10SR
+	help
+	  Driver for Arria10 Development Kit GPIO expansion which
+	  includes reads of pushbuttons and DIP switches as well
+	  as writes to LEDs.
+
 config GPIO_ARIZONA
 	tristate "Wolfson Microelectronics Arizona class devices"
 	depends on MFD_ARIZONA
@@ -822,7 +829,7 @@ config GPIO_ARIZONA
 
 config GPIO_CRYSTAL_COVE
 	tristate "GPIO support for Crystal Cove PMIC"
-	depends on INTEL_SOC_PMIC
+	depends on (X86 || COMPILE_TEST) && INTEL_SOC_PMIC
 	select GPIOLIB_IRQCHIP
 	help
 	  Support for GPIO pins on Crystal Cove PMIC.
@@ -835,6 +842,7 @@ config GPIO_CRYSTAL_COVE
 
 config GPIO_CS5535
 	tristate "AMD CS5535/CS5536 GPIO support"
+	depends on X86 || MIPS || COMPILE_TEST
 	depends on MFD_CS5535
 	help
 	  The AMD CS5535 and CS5536 southbridges support 28 GPIO pins that
@@ -927,7 +935,7 @@ config GPIO_MAX77620
 
 config GPIO_MSIC
 	bool "Intel MSIC mixed signal gpio support"
-	depends on MFD_INTEL_MSIC
+	depends on (X86 || COMPILE_TEST) && MFD_INTEL_MSIC
 	help
 	  Enable support for GPIO on intel MSIC controllers found in
 	  intel MID devices
@@ -1028,7 +1036,7 @@ config GPIO_UCB1400
 
 config GPIO_WHISKEY_COVE
 	tristate "GPIO support for Whiskey Cove PMIC"
-	depends on INTEL_SOC_PMIC
+	depends on (X86 || COMPILE_TEST) && INTEL_SOC_PMIC
 	select GPIOLIB_IRQCHIP
 	help
 	  Support for GPIO pins on Whiskey Cove PMIC.
@@ -1067,6 +1075,7 @@ menu "PCI GPIO expanders"
 
 config GPIO_AMD8111
 	tristate "AMD 8111 GPIO driver"
+	depends on X86 || COMPILE_TEST
 	help
 	  The AMD 8111 south bridge contains 32 GPIO pins which can be used.
 
@@ -1108,6 +1117,7 @@ config GPIO_MERRIFIELD
 
 config GPIO_ML_IOH
 	tristate "OKI SEMICONDUCTOR ML7213 IOH GPIO support"
+	depends on X86 || COMPILE_TEST
 	select GENERIC_IRQ_CHIP
 	help
 	  ML7213 is companion chip for Intel Atom E6xx series.

drivers/gpio/Makefile

@@ -5,6 +5,7 @@ ccflags-$(CONFIG_DEBUG_GPIO)	+= -DDEBUG
 obj-$(CONFIG_GPIOLIB)		+= devres.o
 obj-$(CONFIG_GPIOLIB)		+= gpiolib.o
 obj-$(CONFIG_GPIOLIB)		+= gpiolib-legacy.o
+obj-$(CONFIG_GPIOLIB)		+= gpiolib-devprop.o
 obj-$(CONFIG_OF_GPIO)		+= gpiolib-of.o
 obj-$(CONFIG_GPIO_SYSFS)	+= gpiolib-sysfs.o
 obj-$(CONFIG_GPIO_ACPI)		+= gpiolib-acpi.o
@@ -24,6 +25,7 @@ obj-$(CONFIG_GPIO_ADNP)		+= gpio-adnp.o
 obj-$(CONFIG_GPIO_ADP5520)	+= gpio-adp5520.o
 obj-$(CONFIG_GPIO_ADP5588)	+= gpio-adp5588.o
 obj-$(CONFIG_GPIO_ALTERA)  	+= gpio-altera.o
+obj-$(CONFIG_GPIO_ALTERA_A10SR)	+= gpio-altera-a10sr.o
 obj-$(CONFIG_GPIO_AMD8111)	+= gpio-amd8111.o
 obj-$(CONFIG_GPIO_AMDPT)	+= gpio-amdpt.o
 obj-$(CONFIG_GPIO_ARIZONA)	+= gpio-arizona.o
@@ -102,7 +104,6 @@ obj-$(CONFIG_GPIO_SPEAR_SPICS)	+= gpio-spear-spics.o
 obj-$(CONFIG_GPIO_STA2X11)	+= gpio-sta2x11.o
 obj-$(CONFIG_GPIO_STMPE)	+= gpio-stmpe.o
 obj-$(CONFIG_GPIO_STP_XWAY)	+= gpio-stp-xway.o
-obj-$(CONFIG_GPIO_SX150X)	+= gpio-sx150x.o
 obj-$(CONFIG_GPIO_SYSCON)	+= gpio-syscon.o
 obj-$(CONFIG_GPIO_TB10X)	+= gpio-tb10x.o
 obj-$(CONFIG_GPIO_TC3589X)	+= gpio-tc3589x.o

drivers/gpio/gpio-adnp.c

@@ -468,17 +468,19 @@ static int adnp_irq_setup(struct adnp *adnp)
 		return err;
 	}
 
-	err = gpiochip_irqchip_add(chip,
-				   &adnp_irq_chip,
-				   0,
-				   handle_simple_irq,
-				   IRQ_TYPE_NONE);
+	err = gpiochip_irqchip_add_nested(chip,
+					  &adnp_irq_chip,
+					  0,
+					  handle_simple_irq,
+					  IRQ_TYPE_NONE);
 	if (err) {
 		dev_err(chip->parent,
 			"could not connect irqchip to gpiochip\n");
 		return err;
 	}
 
+	gpiochip_set_nested_irqchip(chip, &adnp_irq_chip, adnp->client->irq);
+
 	return 0;
 }
 

drivers/gpio/gpio-altera-a10sr.c

+/*
+ *  Copyright Intel Corporation (C) 2014-2016. All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ * GPIO driver for  Altera Arria10 MAX5 System Resource Chip
+ *
+ * Adapted from gpio-tps65910.c
+ */
+
+#include <linux/gpio/driver.h>
+#include <linux/mfd/altera-a10sr.h>
+#include <linux/module.h>
+
+/**
+ * struct altr_a10sr_gpio - Altera Max5 GPIO device private data structure
+ * @gp:   : instance of the gpio_chip
+ * @regmap: the regmap from the parent device.
+ */
+struct altr_a10sr_gpio {
+	struct gpio_chip gp;
+	struct regmap *regmap;
+};
+
+static int altr_a10sr_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+	struct altr_a10sr_gpio *gpio = gpiochip_get_data(chip);
+	int ret, val;
+
+	ret = regmap_read(gpio->regmap, ALTR_A10SR_PBDSW_REG, &val);
+	if (ret < 0)
+		return ret;
+
+	return !!(val & BIT(offset - ALTR_A10SR_LED_VALID_SHIFT));
+}
+
+static void altr_a10sr_gpio_set(struct gpio_chip *chip, unsigned int offset,
+				int value)
+{
+	struct altr_a10sr_gpio *gpio = gpiochip_get_data(chip);
+
+	regmap_update_bits(gpio->regmap, ALTR_A10SR_LED_REG,
+			   BIT(ALTR_A10SR_LED_VALID_SHIFT + offset),
+			   value ? BIT(ALTR_A10SR_LED_VALID_SHIFT + offset)
+			   : 0);
+}
+
+static int altr_a10sr_gpio_direction_input(struct gpio_chip *gc,
+					   unsigned int nr)
+{
+	if (nr >= (ALTR_A10SR_IN_VALID_RANGE_LO - ALTR_A10SR_LED_VALID_SHIFT))
+		return 0;
+	return -EINVAL;
+}
+
+static int altr_a10sr_gpio_direction_output(struct gpio_chip *gc,
+					    unsigned int nr, int value)
+{
+	if (nr <= (ALTR_A10SR_OUT_VALID_RANGE_HI - ALTR_A10SR_LED_VALID_SHIFT))
+		return 0;
+	return -EINVAL;
+}
+
+static struct gpio_chip altr_a10sr_gc = {
+	.label = "altr_a10sr_gpio",
+	.owner = THIS_MODULE,
+	.get = altr_a10sr_gpio_get,
+	.set = altr_a10sr_gpio_set,
+	.direction_input = altr_a10sr_gpio_direction_input,
+	.direction_output = altr_a10sr_gpio_direction_output,
+	.can_sleep = true,
+	.ngpio = 12,
+	.base = -1,
+};
+
+static int altr_a10sr_gpio_probe(struct platform_device *pdev)
+{
+	struct altr_a10sr_gpio *gpio;
+	int ret;
+	struct altr_a10sr *a10sr = dev_get_drvdata(pdev->dev.parent);
+
+	gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
+	if (!gpio)
+		return -ENOMEM;
+
+	gpio->regmap = a10sr->regmap;
+
+	gpio->gp = altr_a10sr_gc;
+
+	gpio->gp.of_node = pdev->dev.of_node;
+
+	ret = devm_gpiochip_add_data(&pdev->dev, &gpio->gp, gpio);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, gpio);
+
+	return 0;
+}
+
+static const struct of_device_id altr_a10sr_gpio_of_match[] = {
+	{ .compatible = "altr,a10sr-gpio" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, altr_a10sr_gpio_of_match);
+
+static struct platform_driver altr_a10sr_gpio_driver = {
+	.probe = altr_a10sr_gpio_probe,
+	.driver = {
+		.name	= "altr_a10sr_gpio",
+		.of_match_table = of_match_ptr(altr_a10sr_gpio_of_match),
+	},
+};
+module_platform_driver(altr_a10sr_gpio_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Thor Thayer <tthayer@opensource.altera.com>");
+MODULE_DESCRIPTION("Altera Arria10 System Resource Chip GPIO");

drivers/gpio/gpio-arizona.c

@@ -137,15 +137,10 @@ static int arizona_gpio_probe(struct platform_device *pdev)
 	if (ret < 0) {
 		dev_err(&pdev->dev, "Could not register gpiochip, %d\n",
 			ret);
-		goto err;
+		return ret;
 	}
 
-	platform_set_drvdata(pdev, arizona_gpio);
-
-	return ret;
-
-err:
-	return ret;
+	return 0;
 }
 
 static struct platform_driver arizona_gpio_driver = {

drivers/gpio/gpio-axp209.c

@@ -64,13 +64,9 @@ static int axp20x_gpio_get(struct gpio_chip *chip, unsigned offset)
 {
 	struct axp20x_gpio *gpio = gpiochip_get_data(chip);
 	unsigned int val;
-	int reg, ret;
-
-	reg = axp20x_gpio_get_reg(offset);
-	if (reg < 0)
-		return reg;
+	int ret;
 
-	ret = regmap_read(gpio->regmap, reg, &val);
+	ret = regmap_read(gpio->regmap, AXP20X_GPIO20_SS, &val);
 	if (ret)
 		return ret;
 

drivers/gpio/gpio-crystalcove.c

@@ -351,8 +351,8 @@ static int crystalcove_gpio_probe(struct platform_device *pdev)
 		return retval;
 	}
 
-	gpiochip_irqchip_add(&cg->chip, &crystalcove_irqchip, 0,
-			     handle_simple_irq, IRQ_TYPE_NONE);
+	gpiochip_irqchip_add_nested(&cg->chip, &crystalcove_irqchip, 0,
+				    handle_simple_irq, IRQ_TYPE_NONE);
 
 	retval = request_threaded_irq(irq, NULL, crystalcove_gpio_irq_handler,
 				      IRQF_ONESHOT, KBUILD_MODNAME, cg);
@@ -362,6 +362,8 @@ static int crystalcove_gpio_probe(struct platform_device *pdev)
 		return retval;
 	}
 
+	gpiochip_set_nested_irqchip(&cg->chip, &crystalcove_irqchip, irq);
+
 	return 0;
 }
 

drivers/gpio/gpio-davinci.c

@@ -40,6 +40,7 @@ struct davinci_gpio_regs {
 typedef struct irq_chip *(*gpio_get_irq_chip_cb_t)(unsigned int irq);
 
 #define BINTEN	0x8 /* GPIO Interrupt Per-Bank Enable Register */
+#define MAX_LABEL_SIZE 20
 
 static void __iomem *gpio_base;
 
@@ -201,6 +202,7 @@ static int davinci_gpio_probe(struct platform_device *pdev)
 	struct davinci_gpio_regs __iomem *regs;
 	struct device *dev = &pdev->dev;
 	struct resource *res;
+	char label[MAX_LABEL_SIZE];
 
 	pdata = davinci_gpio_get_pdata(pdev);
 	if (!pdata) {
@@ -237,7 +239,10 @@ static int davinci_gpio_probe(struct platform_device *pdev)
 		return PTR_ERR(gpio_base);
 
 	for (i = 0, base = 0; base < ngpio; i++, base += 32) {
-		chips[i].chip.label = "DaVinci";
+		snprintf(label, MAX_LABEL_SIZE, "davinci_gpio.%d", i);
+		chips[i].chip.label = devm_kstrdup(dev, label, GFP_KERNEL);
+		if (!chips[i].chip.label)
+			return -ENOMEM;
 
 		chips[i].chip.direction_input = davinci_direction_in;
 		chips[i].chip.get = davinci_gpio_get;

drivers/gpio/gpio-dln2.c

@@ -467,7 +467,6 @@ static int dln2_gpio_probe(struct platform_device *pdev)
 	dln2->gpio.base = -1;
 	dln2->gpio.ngpio = pins;
 	dln2->gpio.can_sleep = true;
-	dln2->gpio.irq_not_threaded = true;
 	dln2->gpio.set = dln2_gpio_set;
 	dln2->gpio.get = dln2_gpio_get;
 	dln2->gpio.request = dln2_gpio_request;

drivers/gpio/gpio-etraxfs.c

@@ -471,9 +471,4 @@ static struct platform_driver etraxfs_gpio_driver = {
 	.probe	= etraxfs_gpio_probe,
 };
 
-static int __init etraxfs_gpio_init(void)
-{
-	return platform_driver_register(&etraxfs_gpio_driver);
-}
-
-device_initcall(etraxfs_gpio_init);
+builtin_platform_driver(etraxfs_gpio_driver);

drivers/gpio/gpio-htc-egpio.c

@@ -17,7 +17,7 @@
 #include <linux/platform_data/gpio-htc-egpio.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
-#include <linux/module.h>
+#include <linux/init.h>
 
 struct egpio_chip {
 	int              reg_start;
@@ -160,10 +160,14 @@ static int egpio_get(struct gpio_chip *chip, unsigned offset)
 	bit   = egpio_bit(ei, offset);
 	reg   = egpio->reg_start + egpio_pos(ei, offset);
 
-	value = egpio_readw(ei, reg);
-	pr_debug("readw(%p + %x) = %x\n",
-			ei->base_addr, reg << ei->bus_shift, value);
-	return !!(value & bit);
+	if (test_bit(offset, &egpio->is_out)) {
+		return !!(egpio->cached_values & (1 << offset));
+	} else {
+		value = egpio_readw(ei, reg);
+		pr_debug("readw(%p + %x) = %x\n",
+			 ei->base_addr, reg << ei->bus_shift, value);
+		return !!(value & bit);
+	}
 }
 
 static int egpio_direction_input(struct gpio_chip *chip, unsigned offset)
@@ -225,6 +229,15 @@ static int egpio_direction_output(struct gpio_chip *chip,
 	}
 }
 
+static int egpio_get_direction(struct gpio_chip *chip, unsigned offset)
+{
+	struct egpio_chip *egpio;
+
+	egpio = gpiochip_get_data(chip);
+
+	return !test_bit(offset, &egpio->is_out);
+}
+
 static void egpio_write_cache(struct egpio_info *ei)
 {
 	int               i;
@@ -327,6 +340,7 @@ static int __init egpio_probe(struct platform_device *pdev)
 		chip->set             = egpio_set;
 		chip->direction_input = egpio_direction_input;
 		chip->direction_output = egpio_direction_output;
+		chip->get_direction   = egpio_get_direction;
 		chip->base            = pdata->chip[i].gpio_base;
 		chip->ngpio           = pdata->chip[i].num_gpios;
 
@@ -367,24 +381,6 @@ static int __init egpio_probe(struct platform_device *pdev)
 	return ret;
 }
 
-static int __exit egpio_remove(struct platform_device *pdev)
-{
-	struct egpio_info *ei = platform_get_drvdata(pdev);
-	unsigned int      irq, irq_end;
-
-	if (ei->chained_irq) {
-		irq_end = ei->irq_start + ei->nirqs;
-		for (irq = ei->irq_start; irq < irq_end; irq++) {
-			irq_set_chip_and_handler(irq, NULL, NULL);
-			irq_set_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
-		}
-		irq_set_chained_handler(ei->chained_irq, NULL);
-		device_init_wakeup(&pdev->dev, 0);
-	}
-
-	return 0;
-}
-
 #ifdef CONFIG_PM
 static int egpio_suspend(struct platform_device *pdev, pm_message_t state)
 {
@@ -416,8 +412,8 @@ static int egpio_resume(struct platform_device *pdev)
 static struct platform_driver egpio_driver = {
 	.driver = {
 		.name = "htc-egpio",
+		.suppress_bind_attrs = true,
 	},
-	.remove       = __exit_p(egpio_remove),
 	.suspend      = egpio_suspend,
 	.resume       = egpio_resume,
 };
@@ -426,15 +422,5 @@ static int __init egpio_init(void)
 {
 	return platform_driver_probe(&egpio_driver, egpio_probe);
 }
-
-static void __exit egpio_exit(void)
-{
-	platform_driver_unregister(&egpio_driver);
-}
-
 /* start early for dependencies */
 subsys_initcall(egpio_init);
-module_exit(egpio_exit)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Kevin O'Connor <kevin@koconnor.net>");

drivers/gpio/gpio-intel-mid.c

@@ -421,9 +421,4 @@ static struct pci_driver intel_gpio_driver = {
 	},
 };
 
-static int __init intel_gpio_init(void)
-{
-	return pci_register_driver(&intel_gpio_driver);
-}
-
-device_initcall(intel_gpio_init);
+builtin_pci_driver(intel_gpio_driver);

drivers/gpio/gpio-max732x.c

@@ -520,20 +520,19 @@ static int max732x_irq_setup(struct max732x_chip *chip,
 				client->irq);
 			return ret;
 		}
-		ret =  gpiochip_irqchip_add(&chip->gpio_chip,
-					    &max732x_irq_chip,
-					    irq_base,
-					    handle_simple_irq,
-					    IRQ_TYPE_NONE);
+		ret =  gpiochip_irqchip_add_nested(&chip->gpio_chip,
+						   &max732x_irq_chip,
+						   irq_base,
+						   handle_simple_irq,
+						   IRQ_TYPE_NONE);
 		if (ret) {
 			dev_err(&client->dev,
 				"could not connect irqchip to gpiochip\n");
 			return ret;
 		}
-		gpiochip_set_chained_irqchip(&chip->gpio_chip,
-					     &max732x_irq_chip,
-					     client->irq,
-					     NULL);
+		gpiochip_set_nested_irqchip(&chip->gpio_chip,
+					    &max732x_irq_chip,
+					    client->irq);
 	}
 
 	return 0;

drivers/gpio/gpio-max77620.c

@@ -21,9 +21,6 @@ struct max77620_gpio {
 	struct gpio_chip	gpio_chip;
 	struct regmap		*rmap;
 	struct device		*dev;
-	int			gpio_irq;
-	int			irq_base;
-	int			gpio_base;
 };
 
 static const struct regmap_irq max77620_gpio_irqs[] = {
@@ -254,7 +251,6 @@ static int max77620_gpio_probe(struct platform_device *pdev)
 
 	mgpio->rmap = chip->rmap;
 	mgpio->dev = &pdev->dev;
-	mgpio->gpio_irq = gpio_irq;
 
 	mgpio->gpio_chip.label = pdev->name;
 	mgpio->gpio_chip.parent = &pdev->dev;
@@ -268,7 +264,6 @@ static int max77620_gpio_probe(struct platform_device *pdev)
 	mgpio->gpio_chip.ngpio = MAX77620_GPIO_NR;
 	mgpio->gpio_chip.can_sleep = 1;
 	mgpio->gpio_chip.base = -1;
-	mgpio->irq_base = -1;
 #ifdef CONFIG_OF_GPIO
 	mgpio->gpio_chip.of_node = pdev->dev.parent->of_node;
 #endif
@@ -281,9 +276,8 @@ static int max77620_gpio_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	mgpio->gpio_base = mgpio->gpio_chip.base;
-	ret = devm_regmap_add_irq_chip(&pdev->dev, chip->rmap, mgpio->gpio_irq,
-				       IRQF_ONESHOT, mgpio->irq_base,
+	ret = devm_regmap_add_irq_chip(&pdev->dev, chip->rmap, gpio_irq,
+				       IRQF_ONESHOT, -1,
 				       &max77620_gpio_irq_chip,
 				       &chip->gpio_irq_data);
 	if (ret < 0) {
@@ -296,6 +290,7 @@ static int max77620_gpio_probe(struct platform_device *pdev)
 
 static const struct platform_device_id max77620_gpio_devtype[] = {
 	{ .name = "max77620-gpio", },
+	{ .name = "max20024-gpio", },
 	{},
 };
 MODULE_DEVICE_TABLE(platform, max77620_gpio_devtype);

drivers/gpio/gpio-mb86s7x.c

@@ -217,8 +217,4 @@ static struct platform_driver mb86s70_gpio_driver = {
 	.remove = mb86s70_gpio_remove,
 };
 
-static int __init mb86s70_gpio_init(void)
-{
-	return platform_driver_register(&mb86s70_gpio_driver);
-}
-device_initcall(mb86s70_gpio_init);
+builtin_platform_driver(mb86s70_gpio_driver);

drivers/gpio/gpio-mcp23s08.c

@@ -473,21 +473,20 @@ static int mcp23s08_irq_setup(struct mcp23s08 *mcp)
 		return err;
 	}
 
-	err =  gpiochip_irqchip_add(chip,
-				    &mcp23s08_irq_chip,
-				    0,
-				    handle_simple_irq,
-				    IRQ_TYPE_NONE);
+	err =  gpiochip_irqchip_add_nested(chip,
+					   &mcp23s08_irq_chip,
+					   0,
+					   handle_simple_irq,
+					   IRQ_TYPE_NONE);
 	if (err) {
 		dev_err(chip->parent,
 			"could not connect irqchip to gpiochip: %d\n", err);
 		return err;
 	}
 
-	gpiochip_set_chained_irqchip(chip,
-				     &mcp23s08_irq_chip,
-				     mcp->irq,
-				     NULL);
+	gpiochip_set_nested_irqchip(chip,
+				    &mcp23s08_irq_chip,
+				    mcp->irq);
 
 	return 0;
 }

drivers/gpio/gpio-merrifield.c

@@ -11,6 +11,7 @@
 
 #include <linux/bitops.h>
 #include <linux/gpio/driver.h>
+#include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
@@ -161,6 +162,34 @@ static int mrfld_gpio_direction_output(struct gpio_chip *chip,
 	return 0;
 }
 
+static int mrfld_gpio_get_direction(struct gpio_chip *chip, unsigned int offset)
+{
+	void __iomem *gpdr = gpio_reg(chip, offset, GPDR);
+
+	return (readl(gpdr) & BIT(offset % 32)) ? GPIOF_DIR_OUT : GPIOF_DIR_IN;
+}
+
+static int mrfld_gpio_set_debounce(struct gpio_chip *chip, unsigned int offset,
+				   unsigned int debounce)
+{
+	struct mrfld_gpio *priv = gpiochip_get_data(chip);
+	void __iomem *gfbr = gpio_reg(chip, offset, GFBR);
+	unsigned long flags;
+	u32 value;
+
+	raw_spin_lock_irqsave(&priv->lock, flags);
+
+	if (debounce)
+		value = readl(gfbr) & ~BIT(offset % 32);
+	else
+		value = readl(gfbr) | BIT(offset % 32);
+	writel(value, gfbr);
+
+	raw_spin_unlock_irqrestore(&priv->lock, flags);
+
+	return 0;
+}
+
 static void mrfld_irq_ack(struct irq_data *d)
 {
 	struct mrfld_gpio *priv = irq_data_get_irq_chip_data(d);
@@ -384,6 +413,8 @@ static int mrfld_gpio_probe(struct pci_dev *pdev, const struct pci_device_id *id
 	priv->chip.direction_output = mrfld_gpio_direction_output;
 	priv->chip.get = mrfld_gpio_get;
 	priv->chip.set = mrfld_gpio_set;
+	priv->chip.get_direction = mrfld_gpio_get_direction;
+	priv->chip.set_debounce = mrfld_gpio_set_debounce;
 	priv->chip.base = gpio_base;
 	priv->chip.ngpio = MRFLD_NGPIO;
 	priv->chip.can_sleep = false;
@@ -411,7 +442,7 @@ static int mrfld_gpio_probe(struct pci_dev *pdev, const struct pci_device_id *id
 	}
 
 	retval = gpiochip_irqchip_add(&priv->chip, &mrfld_irqchip, irq_base,
-				      handle_simple_irq, IRQ_TYPE_NONE);
+				      handle_bad_irq, IRQ_TYPE_NONE);
 	if (retval) {
 		dev_err(&pdev->dev, "could not connect irqchip to gpiochip\n");
 		return retval;

drivers/gpio/gpio-mxs.c

@@ -87,10 +87,15 @@ static int mxs_gpio_set_irq_type(struct irq_data *d, unsigned int type)
 	u32 val;
 	u32 pin_mask = 1 << d->hwirq;
 	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	struct irq_chip_type *ct = irq_data_get_chip_type(d);
 	struct mxs_gpio_port *port = gc->private;
 	void __iomem *pin_addr;
 	int edge;
 
+	if (!(ct->type & type))
+		if (irq_setup_alt_chip(d, type))
+			return -EINVAL;
+
 	port->both_edges &= ~pin_mask;
 	switch (type) {
 	case IRQ_TYPE_EDGE_BOTH:
@@ -119,10 +124,13 @@ static int mxs_gpio_set_irq_type(struct irq_data *d, unsigned int type)
 
 	/* set level or edge */
 	pin_addr = port->base + PINCTRL_IRQLEV(port);
-	if (edge & GPIO_INT_LEV_MASK)
+	if (edge & GPIO_INT_LEV_MASK) {
 		writel(pin_mask, pin_addr + MXS_SET);
-	else
+		writel(pin_mask, port->base + PINCTRL_IRQEN(port) + MXS_SET);
+	} else {
 		writel(pin_mask, pin_addr + MXS_CLR);
+		writel(pin_mask, port->base + PINCTRL_PIN2IRQ(port) + MXS_SET);
+	}
 
 	/* set polarity */
 	pin_addr = port->base + PINCTRL_IRQPOL(port);
@@ -202,21 +210,37 @@ static int __init mxs_gpio_init_gc(struct mxs_gpio_port *port, int irq_base)
 	struct irq_chip_generic *gc;
 	struct irq_chip_type *ct;
 
-	gc = irq_alloc_generic_chip("gpio-mxs", 1, irq_base,
+	gc = irq_alloc_generic_chip("gpio-mxs", 2, irq_base,
 				    port->base, handle_level_irq);
 	if (!gc)
 		return -ENOMEM;
 
 	gc->private = port;
 
-	ct = gc->chip_types;
+	ct = &gc->chip_types[0];
+	ct->type = IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW;
+	ct->chip.irq_ack = irq_gc_ack_set_bit;
+	ct->chip.irq_mask = irq_gc_mask_disable_reg;
+	ct->chip.irq_unmask = irq_gc_unmask_enable_reg;
+	ct->chip.irq_set_type = mxs_gpio_set_irq_type;
+	ct->chip.irq_set_wake = mxs_gpio_set_wake_irq;
+	ct->chip.flags = IRQCHIP_SET_TYPE_MASKED;
+	ct->regs.ack = PINCTRL_IRQSTAT(port) + MXS_CLR;
+	ct->regs.enable = PINCTRL_PIN2IRQ(port) + MXS_SET;
+	ct->regs.disable = PINCTRL_PIN2IRQ(port) + MXS_CLR;
+
+	ct = &gc->chip_types[1];
+	ct->type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
 	ct->chip.irq_ack = irq_gc_ack_set_bit;
-	ct->chip.irq_mask = irq_gc_mask_clr_bit;
-	ct->chip.irq_unmask = irq_gc_mask_set_bit;
+	ct->chip.irq_mask = irq_gc_mask_disable_reg;
+	ct->chip.irq_unmask = irq_gc_unmask_enable_reg;
 	ct->chip.irq_set_type = mxs_gpio_set_irq_type;
 	ct->chip.irq_set_wake = mxs_gpio_set_wake_irq;
+	ct->chip.flags = IRQCHIP_SET_TYPE_MASKED;
 	ct->regs.ack = PINCTRL_IRQSTAT(port) + MXS_CLR;
-	ct->regs.mask = PINCTRL_IRQEN(port);
+	ct->regs.enable = PINCTRL_IRQEN(port) + MXS_SET;
+	ct->regs.disable = PINCTRL_IRQEN(port) + MXS_CLR;
+	ct->handler = handle_level_irq;
 
 	irq_setup_generic_chip(gc, IRQ_MSK(32), IRQ_GC_INIT_NESTED_LOCK,
 			       IRQ_NOREQUEST, 0);
@@ -297,11 +321,8 @@ static int mxs_gpio_probe(struct platform_device *pdev)
 	}
 	port->base = base;
 
-	/*
-	 * select the pin interrupt functionality but initially
-	 * disable the interrupts
-	 */
-	writel(~0U, port->base + PINCTRL_PIN2IRQ(port));
+	/* initially disable the interrupts */
+	writel(0, port->base + PINCTRL_PIN2IRQ(port));
 	writel(0, port->base + PINCTRL_IRQEN(port));
 
 	/* clear address has to be used to clear IRQSTAT bits */

drivers/gpio/gpio-pca953x.c

@@ -74,6 +74,7 @@ static const struct i2c_device_id pca953x_id[] = {
 	{ "max7312", 16 | PCA953X_TYPE | PCA_INT, },
 	{ "max7313", 16 | PCA953X_TYPE | PCA_INT, },
 	{ "max7315", 8  | PCA953X_TYPE | PCA_INT, },
+	{ "max7318", 16 | PCA953X_TYPE | PCA_INT, },
 	{ "pca6107", 8  | PCA953X_TYPE | PCA_INT, },
 	{ "tca6408", 8  | PCA953X_TYPE | PCA_INT, },
 	{ "tca6416", 16 | PCA953X_TYPE | PCA_INT, },
@@ -635,20 +636,20 @@ static int pca953x_irq_setup(struct pca953x_chip *chip,
 			return ret;
 		}
 
-		ret =  gpiochip_irqchip_add(&chip->gpio_chip,
-					    &pca953x_irq_chip,
-					    irq_base,
-					    handle_simple_irq,
-					    IRQ_TYPE_NONE);
+		ret =  gpiochip_irqchip_add_nested(&chip->gpio_chip,
+						   &pca953x_irq_chip,
+						   irq_base,
+						   handle_simple_irq,
+						   IRQ_TYPE_NONE);
 		if (ret) {
 			dev_err(&client->dev,
 				"could not connect irqchip to gpiochip\n");
 			return ret;
 		}
 
-		gpiochip_set_chained_irqchip(&chip->gpio_chip,
-					     &pca953x_irq_chip,
-					     client->irq, NULL);
+		gpiochip_set_nested_irqchip(&chip->gpio_chip,
+					    &pca953x_irq_chip,
+					    client->irq);
 	}
 
 	return 0;
@@ -907,6 +908,7 @@ static const struct of_device_id pca953x_dt_ids[] = {
 	{ .compatible = "maxim,max7312", .data = OF_953X(16, PCA_INT), },
 	{ .compatible = "maxim,max7313", .data = OF_953X(16, PCA_INT), },
 	{ .compatible = "maxim,max7315", .data = OF_953X( 8, PCA_INT), },
+	{ .compatible = "maxim,max7318", .data = OF_953X(16, PCA_INT), },
 
 	{ .compatible = "ti,pca6107", .data = OF_953X( 8, PCA_INT), },
 	{ .compatible = "ti,pca9536", .data = OF_953X( 4, 0), },

drivers/gpio/gpio-pcf857x.c

@@ -378,9 +378,10 @@ static int pcf857x_probe(struct i2c_client *client,
 
 	/* Enable irqchip if we have an interrupt */
 	if (client->irq) {
-		status = gpiochip_irqchip_add(&gpio->chip, &pcf857x_irq_chip,
-					      0, handle_level_irq,
-					      IRQ_TYPE_NONE);
+		status = gpiochip_irqchip_add_nested(&gpio->chip,
+						     &pcf857x_irq_chip,
+						     0, handle_level_irq,
+						     IRQ_TYPE_NONE);
 		if (status) {
 			dev_err(&client->dev, "cannot add irqchip\n");
 			goto fail;
@@ -393,8 +394,8 @@ static int pcf857x_probe(struct i2c_client *client,
 		if (status)
 			goto fail;
 
-		gpiochip_set_chained_irqchip(&gpio->chip, &pcf857x_irq_chip,
-					     client->irq, NULL);
+		gpiochip_set_nested_irqchip(&gpio->chip, &pcf857x_irq_chip,
+					    client->irq);
 		gpio->irq_parent = client->irq;
 	}
 

drivers/gpio/gpio-pl061.c

@@ -23,7 +23,6 @@
 #include <linux/gpio.h>
 #include <linux/device.h>
 #include <linux/amba/bus.h>
-#include <linux/amba/pl061.h>
 #include <linux/slab.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/pm.h>
@@ -50,11 +49,12 @@ struct pl061_context_save_regs {
 };
 #endif
 
-struct pl061_gpio {
+struct pl061 {
 	spinlock_t		lock;
 
 	void __iomem		*base;
 	struct gpio_chip	gc;
+	int			parent_irq;
 
 #ifdef CONFIG_PM
 	struct pl061_context_save_regs csave_regs;
@@ -63,22 +63,22 @@ struct pl061_gpio {
 
 static int pl061_get_direction(struct gpio_chip *gc, unsigned offset)
 {
-	struct pl061_gpio *chip = gpiochip_get_data(gc);
+	struct pl061 *pl061 = gpiochip_get_data(gc);
 
-	return !(readb(chip->base + GPIODIR) & BIT(offset));
+	return !(readb(pl061->base + GPIODIR) & BIT(offset));
 }
 
 static int pl061_direction_input(struct gpio_chip *gc, unsigned offset)
 {
-	struct pl061_gpio *chip = gpiochip_get_data(gc);
+	struct pl061 *pl061 = gpiochip_get_data(gc);
 	unsigned long flags;
 	unsigned char gpiodir;
 
-	spin_lock_irqsave(&chip->lock, flags);
-	gpiodir = readb(chip->base + GPIODIR);
+	spin_lock_irqsave(&pl061->lock, flags);
+	gpiodir = readb(pl061->base + GPIODIR);
 	gpiodir &= ~(BIT(offset));
-	writeb(gpiodir, chip->base + GPIODIR);
-	spin_unlock_irqrestore(&chip->lock, flags);
+	writeb(gpiodir, pl061->base + GPIODIR);
+	spin_unlock_irqrestore(&pl061->lock, flags);
 
 	return 0;
 }
@@ -86,44 +86,44 @@ static int pl061_direction_input(struct gpio_chip *gc, unsigned offset)
 static int pl061_direction_output(struct gpio_chip *gc, unsigned offset,
 		int value)
 {
-	struct pl061_gpio *chip = gpiochip_get_data(gc);
+	struct pl061 *pl061 = gpiochip_get_data(gc);
 	unsigned long flags;
 	unsigned char gpiodir;
 
-	spin_lock_irqsave(&chip->lock, flags);
-	writeb(!!value << offset, chip->base + (BIT(offset + 2)));
-	gpiodir = readb(chip->base + GPIODIR);
+	spin_lock_irqsave(&pl061->lock, flags);
+	writeb(!!value << offset, pl061->base + (BIT(offset + 2)));
+	gpiodir = readb(pl061->base + GPIODIR);
 	gpiodir |= BIT(offset);
-	writeb(gpiodir, chip->base + GPIODIR);
+	writeb(gpiodir, pl061->base + GPIODIR);
 
 	/*
 	 * gpio value is set again, because pl061 doesn't allow to set value of
 	 * a gpio pin before configuring it in OUT mode.
 	 */
-	writeb(!!value << offset, chip->base + (BIT(offset + 2)));
-	spin_unlock_irqrestore(&chip->lock, flags);
+	writeb(!!value << offset, pl061->base + (BIT(offset + 2)));
+	spin_unlock_irqrestore(&pl061->lock, flags);
 
 	return 0;
 }
 
 static int pl061_get_value(struct gpio_chip *gc, unsigned offset)
 {
-	struct pl061_gpio *chip = gpiochip_get_data(gc);
+	struct pl061 *pl061 = gpiochip_get_data(gc);
 
-	return !!readb(chip->base + (BIT(offset + 2)));
+	return !!readb(pl061->base + (BIT(offset + 2)));
 }
 
 static void pl061_set_value(struct gpio_chip *gc, unsigned offset, int value)
 {
-	struct pl061_gpio *chip = gpiochip_get_data(gc);
+	struct pl061 *pl061 = gpiochip_get_data(gc);
 
-	writeb(!!value << offset, chip->base + (BIT(offset + 2)));
+	writeb(!!value << offset, pl061->base + (BIT(offset + 2)));
 }
 
 static int pl061_irq_type(struct irq_data *d, unsigned trigger)
 {
 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
-	struct pl061_gpio *chip = gpiochip_get_data(gc);
+	struct pl061 *pl061 = gpiochip_get_data(gc);
 	int offset = irqd_to_hwirq(d);
 	unsigned long flags;
 	u8 gpiois, gpioibe, gpioiev;
@@ -143,11 +143,11 @@ static int pl061_irq_type(struct irq_data *d, unsigned trigger)
 	}
 
 
-	spin_lock_irqsave(&chip->lock, flags);
+	spin_lock_irqsave(&pl061->lock, flags);
 
-	gpioiev = readb(chip->base + GPIOIEV);
-	gpiois = readb(chip->base + GPIOIS);
-	gpioibe = readb(chip->base + GPIOIBE);
+	gpioiev = readb(pl061->base + GPIOIEV);
+	gpiois = readb(pl061->base + GPIOIS);
+	gpioibe = readb(pl061->base + GPIOIBE);
 
 	if (trigger & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) {
 		bool polarity = trigger & IRQ_TYPE_LEVEL_HIGH;
@@ -199,11 +199,11 @@ static int pl061_irq_type(struct irq_data *d, unsigned trigger)
 			 offset);
 	}
 
-	writeb(gpiois, chip->base + GPIOIS);
-	writeb(gpioibe, chip->base + GPIOIBE);
-	writeb(gpioiev, chip->base + GPIOIEV);
+	writeb(gpiois, pl061->base + GPIOIS);
+	writeb(gpioibe, pl061->base + GPIOIBE);
+	writeb(gpioiev, pl061->base + GPIOIEV);
 
-	spin_unlock_irqrestore(&chip->lock, flags);
+	spin_unlock_irqrestore(&pl061->lock, flags);
 
 	return 0;
 }
@@ -213,12 +213,12 @@ static void pl061_irq_handler(struct irq_desc *desc)
 	unsigned long pending;
 	int offset;
 	struct gpio_chip *gc = irq_desc_get_handler_data(desc);
-	struct pl061_gpio *chip = gpiochip_get_data(gc);
+	struct pl061 *pl061 = gpiochip_get_data(gc);
 	struct irq_chip *irqchip = irq_desc_get_chip(desc);
 
 	chained_irq_enter(irqchip, desc);
 
-	pending = readb(chip->base + GPIOMIS);
+	pending = readb(pl061->base + GPIOMIS);
 	if (pending) {
 		for_each_set_bit(offset, &pending, PL061_GPIO_NR)
 			generic_handle_irq(irq_find_mapping(gc->irqdomain,
@@ -231,27 +231,27 @@ static void pl061_irq_handler(struct irq_desc *desc)
 static void pl061_irq_mask(struct irq_data *d)
 {
 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
-	struct pl061_gpio *chip = gpiochip_get_data(gc);
+	struct pl061 *pl061 = gpiochip_get_data(gc);
 	u8 mask = BIT(irqd_to_hwirq(d) % PL061_GPIO_NR);
 	u8 gpioie;
 
-	spin_lock(&chip->lock);
-	gpioie = readb(chip->base + GPIOIE) & ~mask;
-	writeb(gpioie, chip->base + GPIOIE);
-	spin_unlock(&chip->lock);
+	spin_lock(&pl061->lock);
+	gpioie = readb(pl061->base + GPIOIE) & ~mask;
+	writeb(gpioie, pl061->base + GPIOIE);
+	spin_unlock(&pl061->lock);
 }
 
 static void pl061_irq_unmask(struct irq_data *d)
 {
 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
-	struct pl061_gpio *chip = gpiochip_get_data(gc);
+	struct pl061 *pl061 = gpiochip_get_data(gc);
 	u8 mask = BIT(irqd_to_hwirq(d) % PL061_GPIO_NR);
 	u8 gpioie;
 
-	spin_lock(&chip->lock);
-	gpioie = readb(chip->base + GPIOIE) | mask;
-	writeb(gpioie, chip->base + GPIOIE);
-	spin_unlock(&chip->lock);
+	spin_lock(&pl061->lock);
+	gpioie = readb(pl061->base + GPIOIE) | mask;
+	writeb(gpioie, pl061->base + GPIOIE);
+	spin_unlock(&pl061->lock);
 }
 
 /**
@@ -265,19 +265,20 @@ static void pl061_irq_unmask(struct irq_data *d)
 static void pl061_irq_ack(struct irq_data *d)
 {
 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
-	struct pl061_gpio *chip = gpiochip_get_data(gc);
+	struct pl061 *pl061 = gpiochip_get_data(gc);
 	u8 mask = BIT(irqd_to_hwirq(d) % PL061_GPIO_NR);
 
-	spin_lock(&chip->lock);
-	writeb(mask, chip->base + GPIOIC);
-	spin_unlock(&chip->lock);
+	spin_lock(&pl061->lock);
+	writeb(mask, pl061->base + GPIOIC);
+	spin_unlock(&pl061->lock);
 }
 
 static int pl061_irq_set_wake(struct irq_data *d, unsigned int state)
 {
 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct pl061 *pl061 = gpiochip_get_data(gc);
 
-	return irq_set_irq_wake(gc->irq_parent, state);
+	return irq_set_irq_wake(pl061->parent_irq, state);
 }
 
 static struct irq_chip pl061_irqchip = {
@@ -292,81 +293,60 @@ static struct irq_chip pl061_irqchip = {
 static int pl061_probe(struct amba_device *adev, const struct amba_id *id)
 {
 	struct device *dev = &adev->dev;
-	struct pl061_platform_data *pdata = dev_get_platdata(dev);
-	struct pl061_gpio *chip;
-	int ret, irq, i, irq_base;
+	struct pl061 *pl061;
+	int ret, irq;
 
-	chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
-	if (chip == NULL)
+	pl061 = devm_kzalloc(dev, sizeof(*pl061), GFP_KERNEL);
+	if (pl061 == NULL)
 		return -ENOMEM;
 
-	if (pdata) {
-		chip->gc.base = pdata->gpio_base;
-		irq_base = pdata->irq_base;
-		if (irq_base <= 0) {
-			dev_err(&adev->dev, "invalid IRQ base in pdata\n");
-			return -ENODEV;
-		}
-	} else {
-		chip->gc.base = -1;
-		irq_base = 0;
-	}
-
-	chip->base = devm_ioremap_resource(dev, &adev->res);
-	if (IS_ERR(chip->base))
-		return PTR_ERR(chip->base);
+	pl061->base = devm_ioremap_resource(dev, &adev->res);
+	if (IS_ERR(pl061->base))
+		return PTR_ERR(pl061->base);
 
-	spin_lock_init(&chip->lock);
+	spin_lock_init(&pl061->lock);
 	if (of_property_read_bool(dev->of_node, "gpio-ranges")) {
-		chip->gc.request = gpiochip_generic_request;
-		chip->gc.free = gpiochip_generic_free;
+		pl061->gc.request = gpiochip_generic_request;
+		pl061->gc.free = gpiochip_generic_free;
 	}
 
-	chip->gc.get_direction = pl061_get_direction;
-	chip->gc.direction_input = pl061_direction_input;
-	chip->gc.direction_output = pl061_direction_output;
-	chip->gc.get = pl061_get_value;
-	chip->gc.set = pl061_set_value;
-	chip->gc.ngpio = PL061_GPIO_NR;
-	chip->gc.label = dev_name(dev);
-	chip->gc.parent = dev;
-	chip->gc.owner = THIS_MODULE;
-
-	ret = gpiochip_add_data(&chip->gc, chip);
+	pl061->gc.base = -1;
+	pl061->gc.get_direction = pl061_get_direction;
+	pl061->gc.direction_input = pl061_direction_input;
+	pl061->gc.direction_output = pl061_direction_output;
+	pl061->gc.get = pl061_get_value;
+	pl061->gc.set = pl061_set_value;
+	pl061->gc.ngpio = PL061_GPIO_NR;
+	pl061->gc.label = dev_name(dev);
+	pl061->gc.parent = dev;
+	pl061->gc.owner = THIS_MODULE;
+
+	ret = gpiochip_add_data(&pl061->gc, pl061);
 	if (ret)
 		return ret;
 
 	/*
 	 * irq_chip support
 	 */
-	writeb(0, chip->base + GPIOIE); /* disable irqs */
+	writeb(0, pl061->base + GPIOIE); /* disable irqs */
 	irq = adev->irq[0];
 	if (irq < 0) {
 		dev_err(&adev->dev, "invalid IRQ\n");
 		return -ENODEV;
 	}
+	pl061->parent_irq = irq;
 
-	ret = gpiochip_irqchip_add(&chip->gc, &pl061_irqchip,
-				   irq_base, handle_bad_irq,
+	ret = gpiochip_irqchip_add(&pl061->gc, &pl061_irqchip,
+				   0, handle_bad_irq,
 				   IRQ_TYPE_NONE);
 	if (ret) {
 		dev_info(&adev->dev, "could not add irqchip\n");
 		return ret;
 	}
-	gpiochip_set_chained_irqchip(&chip->gc, &pl061_irqchip,
+	gpiochip_set_chained_irqchip(&pl061->gc, &pl061_irqchip,
 				     irq, pl061_irq_handler);
 
-	for (i = 0; i < PL061_GPIO_NR; i++) {
-		if (pdata) {
-			if (pdata->directions & (BIT(i)))
-				pl061_direction_output(&chip->gc, i,
-						pdata->values & (BIT(i)));
-			else
-				pl061_direction_input(&chip->gc, i);
-		}
-	}
-
-	amba_set_drvdata(adev, chip);
+	amba_set_drvdata(adev, pl061);
 	dev_info(&adev->dev, "PL061 GPIO chip @%pa registered\n",
 		 &adev->res.start);
 
@@ -376,20 +356,20 @@ static int pl061_probe(struct amba_device *adev, const struct amba_id *id)
 #ifdef CONFIG_PM
 static int pl061_suspend(struct device *dev)
 {
-	struct pl061_gpio *chip = dev_get_drvdata(dev);
+	struct pl061 *pl061 = dev_get_drvdata(dev);
 	int offset;
 
-	chip->csave_regs.gpio_data = 0;
-	chip->csave_regs.gpio_dir = readb(chip->base + GPIODIR);
-	chip->csave_regs.gpio_is = readb(chip->base + GPIOIS);
-	chip->csave_regs.gpio_ibe = readb(chip->base + GPIOIBE);
-	chip->csave_regs.gpio_iev = readb(chip->base + GPIOIEV);
-	chip->csave_regs.gpio_ie = readb(chip->base + GPIOIE);
+	pl061->csave_regs.gpio_data = 0;
+	pl061->csave_regs.gpio_dir = readb(pl061->base + GPIODIR);
+	pl061->csave_regs.gpio_is = readb(pl061->base + GPIOIS);
+	pl061->csave_regs.gpio_ibe = readb(pl061->base + GPIOIBE);
+	pl061->csave_regs.gpio_iev = readb(pl061->base + GPIOIEV);
+	pl061->csave_regs.gpio_ie = readb(pl061->base + GPIOIE);
 
 	for (offset = 0; offset < PL061_GPIO_NR; offset++) {
-		if (chip->csave_regs.gpio_dir & (BIT(offset)))
-			chip->csave_regs.gpio_data |=
-				pl061_get_value(&chip->gc, offset) << offset;
+		if (pl061->csave_regs.gpio_dir & (BIT(offset)))
+			pl061->csave_regs.gpio_data |=
+				pl061_get_value(&pl061->gc, offset) << offset;
 	}
 
 	return 0;
@@ -397,22 +377,22 @@ static int pl061_suspend(struct device *dev)
 
 static int pl061_resume(struct device *dev)
 {
-	struct pl061_gpio *chip = dev_get_drvdata(dev);
+	struct pl061 *pl061 = dev_get_drvdata(dev);
 	int offset;
 
 	for (offset = 0; offset < PL061_GPIO_NR; offset++) {
-		if (chip->csave_regs.gpio_dir & (BIT(offset)))
-			pl061_direction_output(&chip->gc, offset,
-					chip->csave_regs.gpio_data &
+		if (pl061->csave_regs.gpio_dir & (BIT(offset)))
+			pl061_direction_output(&pl061->gc, offset,
+					pl061->csave_regs.gpio_data &
 					(BIT(offset)));
 		else
-			pl061_direction_input(&chip->gc, offset);
+			pl061_direction_input(&pl061->gc, offset);
 	}
 
-	writeb(chip->csave_regs.gpio_is, chip->base + GPIOIS);
-	writeb(chip->csave_regs.gpio_ibe, chip->base + GPIOIBE);
-	writeb(chip->csave_regs.gpio_iev, chip->base + GPIOIEV);
-	writeb(chip->csave_regs.gpio_ie, chip->base + GPIOIE);
+	writeb(pl061->csave_regs.gpio_is, pl061->base + GPIOIS);
+	writeb(pl061->csave_regs.gpio_ibe, pl061->base + GPIOIBE);
+	writeb(pl061->csave_regs.gpio_iev, pl061->base + GPIOIEV);
+	writeb(pl061->csave_regs.gpio_ie, pl061->base + GPIOIE);
 
 	return 0;
 }

drivers/gpio/gpio-stmpe.c

@@ -413,7 +413,7 @@ static irqreturn_t stmpe_gpio_irq(int irq, void *dev)
 		    stmpe->partnum != STMPE1801) {
 			stmpe_reg_write(stmpe, statmsbreg + i, status[i]);
 			stmpe_reg_write(stmpe,
-					stmpe->regs[STMPE_IDX_GPEDR_LSB + i],
+					stmpe->regs[STMPE_IDX_GPEDR_MSB] + i,
 					status[i]);
 		}
 	}
@@ -484,21 +484,20 @@ static int stmpe_gpio_probe(struct platform_device *pdev)
 				if (stmpe_gpio->norequest_mask & BIT(i))
 					clear_bit(i, stmpe_gpio->chip.irq_valid_mask);
 		}
-		ret =  gpiochip_irqchip_add(&stmpe_gpio->chip,
-					    &stmpe_gpio_irq_chip,
-					    0,
-					    handle_simple_irq,
-					    IRQ_TYPE_NONE);
+		ret =  gpiochip_irqchip_add_nested(&stmpe_gpio->chip,
+						   &stmpe_gpio_irq_chip,
+						   0,
+						   handle_simple_irq,
+						   IRQ_TYPE_NONE);
 		if (ret) {
 			dev_err(&pdev->dev,
 				"could not connect irqchip to gpiochip\n");
 			goto out_disable;
 		}
 
-		gpiochip_set_chained_irqchip(&stmpe_gpio->chip,
-					     &stmpe_gpio_irq_chip,
-					     irq,
-					     NULL);
+		gpiochip_set_nested_irqchip(&stmpe_gpio->chip,
+					    &stmpe_gpio_irq_chip,
+					    irq);
 	}
 
 	platform_set_drvdata(pdev, stmpe_gpio);

drivers/gpio/gpio-tc3589x.c

@@ -337,21 +337,20 @@ static int tc3589x_gpio_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	ret =  gpiochip_irqchip_add(&tc3589x_gpio->chip,
-				    &tc3589x_gpio_irq_chip,
-				    0,
-				    handle_simple_irq,
-				    IRQ_TYPE_NONE);
+	ret =  gpiochip_irqchip_add_nested(&tc3589x_gpio->chip,
+					   &tc3589x_gpio_irq_chip,
+					   0,
+					   handle_simple_irq,
+					   IRQ_TYPE_NONE);
 	if (ret) {
 		dev_err(&pdev->dev,
 			"could not connect irqchip to gpiochip\n");
 		return ret;
 	}
 
-	gpiochip_set_chained_irqchip(&tc3589x_gpio->chip,
-				     &tc3589x_gpio_irq_chip,
-				     irq,
-				     NULL);
+	gpiochip_set_nested_irqchip(&tc3589x_gpio->chip,
+				    &tc3589x_gpio_irq_chip,
+				    irq);
 
 	platform_set_drvdata(pdev, tc3589x_gpio);
 

drivers/gpio/gpio-vf610.c

@@ -283,8 +283,4 @@ static struct platform_driver vf610_gpio_driver = {
 	.probe		= vf610_gpio_probe,
 };
 
-static int __init gpio_vf610_init(void)
-{
-	return platform_driver_register(&vf610_gpio_driver);
-}
-device_initcall(gpio_vf610_init);
+builtin_platform_driver(vf610_gpio_driver);

drivers/gpio/gpio-wcove.c

@@ -426,8 +426,8 @@ static int wcove_gpio_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	ret = gpiochip_irqchip_add(&wg->chip, &wcove_irqchip, 0,
-			     handle_simple_irq, IRQ_TYPE_NONE);
+	ret = gpiochip_irqchip_add_nested(&wg->chip, &wcove_irqchip, 0,
+					  handle_simple_irq, IRQ_TYPE_NONE);
 	if (ret) {
 		dev_err(dev, "Failed to add irqchip: %d\n", ret);
 		return ret;
@@ -446,6 +446,8 @@ static int wcove_gpio_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	gpiochip_set_nested_irqchip(&wg->chip, &wcove_irqchip, virq);
+
 	return 0;
 }
 

drivers/gpio/gpiolib-acpi.c

@@ -468,7 +468,8 @@ static int acpi_gpio_property_lookup(struct fwnode_handle *fwnode,
 	int ret;
 
 	memset(&args, 0, sizeof(args));
-	ret = acpi_node_get_property_reference(fwnode, propname, index, &args);
+	ret = __acpi_node_get_property_reference(fwnode, propname, index, 3,
+						 &args);
 	if (ret) {
 		struct acpi_device *adev = to_acpi_device_node(fwnode);
 
@@ -483,13 +484,13 @@ static int acpi_gpio_property_lookup(struct fwnode_handle *fwnode,
 	 * on returned args.
 	 */
 	lookup->adev = args.adev;
-	if (args.nargs >= 2) {
-		lookup->index = args.args[0];
-		lookup->pin_index = args.args[1];
-		/* 3rd argument, if present is used to specify active_low. */
-		if (args.nargs >= 3)
-			lookup->active_low = !!args.args[2];
-	}
+	if (args.nargs != 3)
+		return -EPROTO;
+
+	lookup->index = args.args[0];
+	lookup->pin_index = args.args[1];
+	lookup->active_low = !!args.args[2];
+
 	return 0;
 }
 
@@ -859,6 +860,77 @@ static void acpi_gpiochip_free_regions(struct acpi_gpio_chip *achip)
 	}
 }
 
+static struct gpio_desc *acpi_gpiochip_parse_own_gpio(
+	struct acpi_gpio_chip *achip, struct fwnode_handle *fwnode,
+	const char **name, unsigned int *lflags, unsigned int *dflags)
+{
+	struct gpio_chip *chip = achip->chip;
+	struct gpio_desc *desc;
+	u32 gpios[2];
+	int ret;
+
+	*lflags = 0;
+	*dflags = 0;
+	*name = NULL;
+
+	ret = fwnode_property_read_u32_array(fwnode, "gpios", gpios,
+					     ARRAY_SIZE(gpios));
+	if (ret < 0)
+		return ERR_PTR(ret);
+
+	ret = acpi_gpiochip_pin_to_gpio_offset(chip->gpiodev, gpios[0]);
+	if (ret < 0)
+		return ERR_PTR(ret);
+
+	desc = gpiochip_get_desc(chip, ret);
+	if (IS_ERR(desc))
+		return desc;
+
+	if (gpios[1])
+		*lflags |= GPIO_ACTIVE_LOW;
+
+	if (fwnode_property_present(fwnode, "input"))
+		*dflags |= GPIOD_IN;
+	else if (fwnode_property_present(fwnode, "output-low"))
+		*dflags |= GPIOD_OUT_LOW;
+	else if (fwnode_property_present(fwnode, "output-high"))
+		*dflags |= GPIOD_OUT_HIGH;
+	else
+		return ERR_PTR(-EINVAL);
+
+	fwnode_property_read_string(fwnode, "line-name", name);
+
+	return desc;
+}
+
+static void acpi_gpiochip_scan_gpios(struct acpi_gpio_chip *achip)
+{
+	struct gpio_chip *chip = achip->chip;
+	struct fwnode_handle *fwnode;
+
+	device_for_each_child_node(chip->parent, fwnode) {
+		unsigned int lflags, dflags;
+		struct gpio_desc *desc;
+		const char *name;
+		int ret;
+
+		if (!fwnode_property_present(fwnode, "gpio-hog"))
+			continue;
+
+		desc = acpi_gpiochip_parse_own_gpio(achip, fwnode, &name,
+						    &lflags, &dflags);
+		if (IS_ERR(desc))
+			continue;
+
+		ret = gpiod_hog(desc, name, lflags, dflags);
+		if (ret) {
+			dev_err(chip->parent, "Failed to hog GPIO\n");
+			fwnode_handle_put(fwnode);
+			return;
+		}
+	}
+}
+
 void acpi_gpiochip_add(struct gpio_chip *chip)
 {
 	struct acpi_gpio_chip *acpi_gpio;
@@ -889,7 +961,11 @@ void acpi_gpiochip_add(struct gpio_chip *chip)
 		return;
 	}
 
+	if (!chip->names)
+		devprop_gpiochip_set_names(chip);
+
 	acpi_gpiochip_request_regions(acpi_gpio);
+	acpi_gpiochip_scan_gpios(acpi_gpio);
 	acpi_walk_dep_device_list(handle);
 }
 
@@ -918,18 +994,27 @@ void acpi_gpiochip_remove(struct gpio_chip *chip)
 	kfree(acpi_gpio);
 }
 
-static unsigned int acpi_gpio_package_count(const union acpi_object *obj)
+static int acpi_gpio_package_count(const union acpi_object *obj)
 {
 	const union acpi_object *element = obj->package.elements;
 	const union acpi_object *end = element + obj->package.count;
 	unsigned int count = 0;
 
 	while (element < end) {
-		if (element->type == ACPI_TYPE_LOCAL_REFERENCE)
+		switch (element->type) {
+		case ACPI_TYPE_LOCAL_REFERENCE:
+			element += 3;
+			/* Fallthrough */
+		case ACPI_TYPE_INTEGER:
+			element++;
 			count++;
+			break;
 
-		element++;
+		default:
+			return -EPROTO;
+		}
 	}
+
 	return count;
 }
 

drivers/gpio/gpiolib-devprop.c

+/*
+ * Device property helpers for GPIO chips.
+ *
+ * Copyright (C) 2016, Intel Corporation
+ * Author: Mika Westerberg <mika.westerberg@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/property.h>
+#include <linux/slab.h>
+#include <linux/gpio/consumer.h>
+#include <linux/gpio/driver.h>
+
+#include "gpiolib.h"
+
+/**
+ * devprop_gpiochip_set_names - Set GPIO line names using device properties
+ * @chip: GPIO chip whose lines should be named, if possible
+ *
+ * Looks for device property "gpio-line-names" and if it exists assigns
+ * GPIO line names for the chip. The memory allocated for the assigned
+ * names belong to the underlying firmware node and should not be released
+ * by the caller.
+ */
+void devprop_gpiochip_set_names(struct gpio_chip *chip)
+{
+	struct gpio_device *gdev = chip->gpiodev;
+	const char **names;
+	int ret, i;
+
+	if (!chip->parent) {
+		dev_warn(&gdev->dev, "GPIO chip parent is NULL\n");
+		return;
+	}
+
+	ret = device_property_read_string_array(chip->parent, "gpio-line-names",
+						NULL, 0);
+	if (ret < 0)
+		return;
+
+	if (ret != gdev->ngpio) {
+		dev_warn(chip->parent,
+			 "names %d do not match number of GPIOs %d\n", ret,
+			 gdev->ngpio);
+		return;
+	}
+
+	names = kcalloc(gdev->ngpio, sizeof(*names), GFP_KERNEL);
+	if (!names)
+		return;
+
+	ret = device_property_read_string_array(chip->parent, "gpio-line-names",
+						names, gdev->ngpio);
+	if (ret < 0) {
+		dev_warn(chip->parent, "failed to read GPIO line names\n");
+		kfree(names);
+		return;
+	}
+
+	for (i = 0; i < gdev->ngpio; i++)
+		gdev->descs[i].name = names[i];
+
+	kfree(names);
+}

drivers/gpio/gpiolib-of.c

@@ -225,51 +225,6 @@ static struct gpio_desc *of_parse_own_gpio(struct device_node *np,
 	return desc;
 }
 
-/**
- * of_gpiochip_set_names() - set up the names of the lines
- * @chip: GPIO chip whose lines should be named, if possible
- */
-static void of_gpiochip_set_names(struct gpio_chip *gc)
-{
-	struct gpio_device *gdev = gc->gpiodev;
-	struct device_node *np = gc->of_node;
-	int i;
-	int nstrings;
-
-	nstrings = of_property_count_strings(np, "gpio-line-names");
-	if (nstrings <= 0)
-		/* Lines names not present */
-		return;
-
-	/* This is normally not what you want */
-	if (gdev->ngpio != nstrings)
-		dev_info(&gdev->dev, "gpio-line-names specifies %d line "
-			 "names but there are %d lines on the chip\n",
-			 nstrings, gdev->ngpio);
-
-	/*
-	 * Make sure to not index beyond the end of the number of descriptors
-	 * of the GPIO device.
-	 */
-	for (i = 0; i < gdev->ngpio; i++) {
-		const char *name;
-		int ret;
-
-		ret = of_property_read_string_index(np,
-						    "gpio-line-names",
-						    i,
-						    &name);
-		if (ret) {
-			if (ret != -ENODATA)
-                                dev_err(&gdev->dev,
-                                        "unable to name line %d: %d\n",
-                                        i, ret);
-			break;
-		}
-		gdev->descs[i].name = name;
-	}
-}
-
 /**
  * of_gpiochip_scan_gpios - Scan gpio-controller for gpio definitions
  * @chip:	gpio chip to act on
@@ -296,8 +251,10 @@ static int of_gpiochip_scan_gpios(struct gpio_chip *chip)
 			continue;
 
 		ret = gpiod_hog(desc, name, lflags, dflags);
-		if (ret < 0)
+		if (ret < 0) {
+			of_node_put(np);
 			return ret;
+		}
 	}
 
 	return 0;
@@ -526,7 +483,7 @@ int of_gpiochip_add(struct gpio_chip *chip)
 
 	/* If the chip defines names itself, these take precedence */
 	if (!chip->names)
-		of_gpiochip_set_names(chip);
+		devprop_gpiochip_set_names(chip);
 
 	of_node_get(chip->of_node);
 

drivers/gpio/gpiolib.c

@@ -986,7 +986,8 @@ static int gpio_chrdev_open(struct inode *inode, struct file *filp)
 		return -ENODEV;
 	get_device(&gdev->dev);
 	filp->private_data = gdev;
-	return 0;
+
+	return nonseekable_open(inode, filp);
 }
 
 /**
@@ -1011,7 +1012,7 @@ static const struct file_operations gpio_fileops = {
 	.release = gpio_chrdev_release,
 	.open = gpio_chrdev_open,
 	.owner = THIS_MODULE,
-	.llseek = noop_llseek,
+	.llseek = no_llseek,
 	.unlocked_ioctl = gpio_ioctl,
 #ifdef CONFIG_COMPAT
 	.compat_ioctl = gpio_ioctl_compat,
@@ -1512,7 +1513,7 @@ static bool gpiochip_irqchip_irq_valid(const struct gpio_chip *gpiochip,
 }
 
 /**
- * gpiochip_set_chained_irqchip() - sets a chained irqchip to a gpiochip
+ * gpiochip_set_cascaded_irqchip() - connects a cascaded irqchip to a gpiochip
  * @gpiochip: the gpiochip to set the irqchip chain to
  * @irqchip: the irqchip to chain to the gpiochip
  * @parent_irq: the irq number corresponding to the parent IRQ for this
@@ -1521,10 +1522,10 @@ static bool gpiochip_irqchip_irq_valid(const struct gpio_chip *gpiochip,
  * coming out of the gpiochip. If the interrupt is nested rather than
  * cascaded, pass NULL in this handler argument
  */
-void gpiochip_set_chained_irqchip(struct gpio_chip *gpiochip,
-				  struct irq_chip *irqchip,
-				  int parent_irq,
-				  irq_flow_handler_t parent_handler)
+static void gpiochip_set_cascaded_irqchip(struct gpio_chip *gpiochip,
+					  struct irq_chip *irqchip,
+					  int parent_irq,
+					  irq_flow_handler_t parent_handler)
 {
 	unsigned int offset;
 
@@ -1548,7 +1549,7 @@ void gpiochip_set_chained_irqchip(struct gpio_chip *gpiochip,
 		irq_set_chained_handler_and_data(parent_irq, parent_handler,
 						 gpiochip);
 
-		gpiochip->irq_parent = parent_irq;
+		gpiochip->irq_chained_parent = parent_irq;
 	}
 
 	/* Set the parent IRQ for all affected IRQs */
@@ -1559,8 +1560,47 @@ void gpiochip_set_chained_irqchip(struct gpio_chip *gpiochip,
 			       parent_irq);
 	}
 }
+
+/**
+ * gpiochip_set_chained_irqchip() - connects a chained irqchip to a gpiochip
+ * @gpiochip: the gpiochip to set the irqchip chain to
+ * @irqchip: the irqchip to chain to the gpiochip
+ * @parent_irq: the irq number corresponding to the parent IRQ for this
+ * chained irqchip
+ * @parent_handler: the parent interrupt handler for the accumulated IRQ
+ * coming out of the gpiochip. If the interrupt is nested rather than
+ * cascaded, pass NULL in this handler argument
+ */
+void gpiochip_set_chained_irqchip(struct gpio_chip *gpiochip,
+				  struct irq_chip *irqchip,
+				  int parent_irq,
+				  irq_flow_handler_t parent_handler)
+{
+	gpiochip_set_cascaded_irqchip(gpiochip, irqchip, parent_irq,
+				      parent_handler);
+}
 EXPORT_SYMBOL_GPL(gpiochip_set_chained_irqchip);
 
+/**
+ * gpiochip_set_nested_irqchip() - connects a nested irqchip to a gpiochip
+ * @gpiochip: the gpiochip to set the irqchip nested handler to
+ * @irqchip: the irqchip to nest to the gpiochip
+ * @parent_irq: the irq number corresponding to the parent IRQ for this
+ * nested irqchip
+ */
+void gpiochip_set_nested_irqchip(struct gpio_chip *gpiochip,
+				 struct irq_chip *irqchip,
+				 int parent_irq)
+{
+	if (!gpiochip->irq_nested) {
+		chip_err(gpiochip, "tried to nest a chained gpiochip\n");
+		return;
+	}
+	gpiochip_set_cascaded_irqchip(gpiochip, irqchip, parent_irq,
+				      NULL);
+}
+EXPORT_SYMBOL_GPL(gpiochip_set_nested_irqchip);
+
 /**
  * gpiochip_irq_map() - maps an IRQ into a GPIO irqchip
  * @d: the irqdomain used by this irqchip
@@ -1583,8 +1623,8 @@ static int gpiochip_irq_map(struct irq_domain *d, unsigned int irq,
 	 */
 	irq_set_lockdep_class(irq, chip->lock_key);
 	irq_set_chip_and_handler(irq, chip->irqchip, chip->irq_handler);
-	/* Chips that can sleep need nested thread handlers */
-	if (chip->can_sleep && !chip->irq_not_threaded)
+	/* Chips that use nested thread handlers have them marked */
+	if (chip->irq_nested)
 		irq_set_nested_thread(irq, 1);
 	irq_set_noprobe(irq);
 
@@ -1602,7 +1642,7 @@ static void gpiochip_irq_unmap(struct irq_domain *d, unsigned int irq)
 {
 	struct gpio_chip *chip = d->host_data;
 
-	if (chip->can_sleep)
+	if (chip->irq_nested)
 		irq_set_nested_thread(irq, 0);
 	irq_set_chip_and_handler(irq, NULL, NULL);
 	irq_set_chip_data(irq, NULL);
@@ -1657,9 +1697,9 @@ static void gpiochip_irqchip_remove(struct gpio_chip *gpiochip)
 
 	acpi_gpiochip_free_interrupts(gpiochip);
 
-	if (gpiochip->irq_parent) {
-		irq_set_chained_handler(gpiochip->irq_parent, NULL);
-		irq_set_handler_data(gpiochip->irq_parent, NULL);
+	if (gpiochip->irq_chained_parent) {
+		irq_set_chained_handler(gpiochip->irq_chained_parent, NULL);
+		irq_set_handler_data(gpiochip->irq_chained_parent, NULL);
 	}
 
 	/* Remove all IRQ mappings and delete the domain */
@@ -1683,7 +1723,7 @@ static void gpiochip_irqchip_remove(struct gpio_chip *gpiochip)
 }
 
 /**
- * gpiochip_irqchip_add() - adds an irqchip to a gpiochip
+ * _gpiochip_irqchip_add() - adds an irqchip to a gpiochip
  * @gpiochip: the gpiochip to add the irqchip to
  * @irqchip: the irqchip to add to the gpiochip
  * @first_irq: if not dynamically assigned, the base (first) IRQ to
@@ -1691,6 +1731,8 @@ static void gpiochip_irqchip_remove(struct gpio_chip *gpiochip)
  * @handler: the irq handler to use (often a predefined irq core function)
  * @type: the default type for IRQs on this irqchip, pass IRQ_TYPE_NONE
  * to have the core avoid setting up any default type in the hardware.
+ * @nested: whether this is a nested irqchip calling handle_nested_irq()
+ * in its IRQ handler
  * @lock_key: lockdep class
  *
  * This function closely associates a certain irqchip with a certain
@@ -1712,6 +1754,7 @@ int _gpiochip_irqchip_add(struct gpio_chip *gpiochip,
 			  unsigned int first_irq,
 			  irq_flow_handler_t handler,
 			  unsigned int type,
+			  bool nested,
 			  struct lock_class_key *lock_key)
 {
 	struct device_node *of_node;
@@ -1726,6 +1769,7 @@ int _gpiochip_irqchip_add(struct gpio_chip *gpiochip,
 		pr_err("missing gpiochip .dev parent pointer\n");
 		return -EINVAL;
 	}
+	gpiochip->irq_nested = nested;
 	of_node = gpiochip->parent->of_node;
 #ifdef CONFIG_OF_GPIO
 	/*
@@ -2223,6 +2267,7 @@ EXPORT_SYMBOL_GPL(gpiod_direction_input);
 static int _gpiod_direction_output_raw(struct gpio_desc *desc, int value)
 {
 	struct gpio_chip *gc = desc->gdev->chip;
+	int val = !!value;
 	int ret;
 
 	/* GPIOs used for IRQs shall not be set as output */
@@ -2242,7 +2287,7 @@ static int _gpiod_direction_output_raw(struct gpio_desc *desc, int value)
 				goto set_output_value;
 		}
 		/* Emulate open drain by not actively driving the line high */
-		if (value)
+		if (val)
 			return gpiod_direction_input(desc);
 	}
 	else if (test_bit(FLAG_OPEN_SOURCE, &desc->flags)) {
@@ -2253,7 +2298,7 @@ static int _gpiod_direction_output_raw(struct gpio_desc *desc, int value)
 				goto set_output_value;
 		}
 		/* Emulate open source by not actively driving the line low */
-		if (!value)
+		if (!val)
 			return gpiod_direction_input(desc);
 	} else {
 		/* Make sure to disable open drain/source hardware, if any */
@@ -2271,10 +2316,10 @@ static int _gpiod_direction_output_raw(struct gpio_desc *desc, int value)
 		return -EIO;
 	}
 
-	ret = gc->direction_output(gc, gpio_chip_hwgpio(desc), value);
+	ret = gc->direction_output(gc, gpio_chip_hwgpio(desc), val);
 	if (!ret)
 		set_bit(FLAG_IS_OUT, &desc->flags);
-	trace_gpio_value(desc_to_gpio(desc), 0, value);
+	trace_gpio_value(desc_to_gpio(desc), 0, val);
 	trace_gpio_direction(desc_to_gpio(desc), 0, ret);
 	return ret;
 }
@@ -2314,6 +2359,8 @@ int gpiod_direction_output(struct gpio_desc *desc, int value)
 	VALIDATE_DESC(desc);
 	if (test_bit(FLAG_ACTIVE_LOW, &desc->flags))
 		value = !value;
+	else
+		value = !!value;
 	return _gpiod_direction_output_raw(desc, value);
 }
 EXPORT_SYMBOL_GPL(gpiod_direction_output);
@@ -2758,6 +2805,15 @@ int gpiochip_lock_as_irq(struct gpio_chip *chip, unsigned int offset)
 	}
 
 	set_bit(FLAG_USED_AS_IRQ, &desc->flags);
+
+	/*
+	 * If the consumer has not set up a label (such as when the
+	 * IRQ is referenced from .to_irq()) we set up a label here
+	 * so it is clear this is used as an interrupt.
+	 */
+	if (!desc->label)
+		desc_set_label(desc, "interrupt");
+
 	return 0;
 }
 EXPORT_SYMBOL_GPL(gpiochip_lock_as_irq);
@@ -2772,10 +2828,17 @@ EXPORT_SYMBOL_GPL(gpiochip_lock_as_irq);
  */
 void gpiochip_unlock_as_irq(struct gpio_chip *chip, unsigned int offset)
 {
-	if (offset >= chip->ngpio)
+	struct gpio_desc *desc;
+
+	desc = gpiochip_get_desc(chip, offset);
+	if (IS_ERR(desc))
 		return;
 
-	clear_bit(FLAG_USED_AS_IRQ, &chip->gpiodev->descs[offset].flags);
+	clear_bit(FLAG_USED_AS_IRQ, &desc->flags);
+
+	/* If we only had this marking, erase it */
+	if (desc->label && !strcmp(desc->label, "interrupt"))
+		desc_set_label(desc, NULL);
 }
 EXPORT_SYMBOL_GPL(gpiochip_unlock_as_irq);
 
@@ -3170,7 +3233,7 @@ static int gpiod_configure_flags(struct gpio_desc *desc, const char *con_id,
 	/* Process flags */
 	if (dflags & GPIOD_FLAGS_BIT_DIR_OUT)
 		status = gpiod_direction_output(desc,
-					      dflags & GPIOD_FLAGS_BIT_DIR_VAL);
+				!!(dflags & GPIOD_FLAGS_BIT_DIR_VAL));
 	else
 		status = gpiod_direction_input(desc);
 

drivers/gpio/gpiolib.h

@@ -209,6 +209,8 @@ static int __maybe_unused gpio_chip_hwgpio(const struct gpio_desc *desc)
 	return desc - &desc->gdev->descs[0];
 }
 
+void devprop_gpiochip_set_names(struct gpio_chip *chip);
+
 /* With descriptor prefix */
 
 #define gpiod_emerg(desc, fmt, ...)					       \

drivers/pinctrl/Kconfig

@@ -164,6 +164,20 @@ config PINCTRL_SIRF
 	select GENERIC_PINCONF
 	select GPIOLIB_IRQCHIP
 
+config PINCTRL_SX150X
+	bool "Semtech SX150x I2C GPIO expander pinctrl driver"
+	depends on GPIOLIB && I2C=y
+	select PINMUX
+	select PINCONF
+	select GENERIC_PINCONF
+	select GPIOLIB_IRQCHIP
+	help
+	  Say yes here to provide support for Semtech SX150x-series I2C
+	  GPIO expanders as pinctrl module.
+	  Compatible models include:
+	  - 8 bits:  sx1508q, sx1502q
+	  - 16 bits: sx1509q, sx1506q
+
 config PINCTRL_PISTACHIO
 	def_bool y if MACH_PISTACHIO
 	depends on GPIOLIB

drivers/pinctrl/Makefile

@@ -25,6 +25,7 @@ obj-$(CONFIG_PINCTRL_PISTACHIO)	+= pinctrl-pistachio.o
 obj-$(CONFIG_PINCTRL_ROCKCHIP)	+= pinctrl-rockchip.o
 obj-$(CONFIG_PINCTRL_SINGLE)	+= pinctrl-single.o
 obj-$(CONFIG_PINCTRL_SIRF)	+= sirf/
+obj-$(CONFIG_PINCTRL_SX150X)	+= pinctrl-sx150x.o
 obj-$(CONFIG_ARCH_TEGRA)	+= tegra/
 obj-$(CONFIG_PINCTRL_TZ1090)	+= pinctrl-tz1090.o
 obj-$(CONFIG_PINCTRL_TZ1090_PDC)	+= pinctrl-tz1090-pdc.o

include/linux/amba/pl061.h

-#include <linux/types.h>
-
-/* platform data for the PL061 GPIO driver */
-
-struct pl061_platform_data {
-	/* number of the first GPIO */
-	unsigned	gpio_base;
-
-	/* number of the first IRQ.
-	 * If the IRQ functionality in not desired this must be set to 0.
-	 */
-	unsigned	irq_base;
-
-	u8		directions;	/* startup directions, 1: out, 0: in */
-	u8		values;		/* startup values */
-};

include/linux/gpio/driver.h

@@ -82,8 +82,6 @@ enum single_ended_mode {
  *	implies that if the chip supports IRQs, these IRQs need to be threaded
  *	as the chip access may sleep when e.g. reading out the IRQ status
  *	registers.
- * @irq_not_threaded: flag must be set if @can_sleep is set but the
- *	IRQs don't need to be threaded
  * @read_reg: reader function for generic GPIO
  * @write_reg: writer function for generic GPIO
  * @pin2mask: some generic GPIO controllers work with the big-endian bits
@@ -91,7 +89,7 @@ enum single_ended_mode {
  *	bit. This callback assigns the right bit mask.
  * @reg_dat: data (in) register for generic GPIO
  * @reg_set: output set register (out=high) for generic GPIO
- * @reg_clk: output clear register (out=low) for generic GPIO
+ * @reg_clr: output clear register (out=low) for generic GPIO
  * @reg_dir: direction setting register for generic GPIO
  * @bgpio_bits: number of register bits used for a generic GPIO i.e.
  *	<register width> * 8
@@ -109,8 +107,10 @@ enum single_ended_mode {
  *	for GPIO IRQs, provided by GPIO driver
  * @irq_default_type: default IRQ triggering type applied during GPIO driver
  *	initialization, provided by GPIO driver
- * @irq_parent: GPIO IRQ chip parent/bank linux irq number,
- *	provided by GPIO driver
+ * @irq_chained_parent: GPIO IRQ chip parent/bank linux irq number,
+ *	provided by GPIO driver for chained interrupt (not for nested
+ *	interrupts).
+ * @irq_nested: True if set the interrupt handling is nested.
  * @irq_need_valid_mask: If set core allocates @irq_valid_mask with all
  *	bits set to one
  * @irq_valid_mask: If not %NULL holds bitmask of GPIOs which are valid to
@@ -166,7 +166,6 @@ struct gpio_chip {
 	u16			ngpio;
 	const char		*const *names;
 	bool			can_sleep;
-	bool			irq_not_threaded;
 
 #if IS_ENABLED(CONFIG_GPIO_GENERIC)
 	unsigned long (*read_reg)(void __iomem *reg);
@@ -192,7 +191,8 @@ struct gpio_chip {
 	unsigned int		irq_base;
 	irq_flow_handler_t	irq_handler;
 	unsigned int		irq_default_type;
-	int			irq_parent;
+	int			irq_chained_parent;
+	bool			irq_nested;
 	bool			irq_need_valid_mask;
 	unsigned long		*irq_valid_mask;
 	struct lock_class_key	*lock_key;
@@ -270,24 +270,40 @@ void gpiochip_set_chained_irqchip(struct gpio_chip *gpiochip,
 		int parent_irq,
 		irq_flow_handler_t parent_handler);
 
+void gpiochip_set_nested_irqchip(struct gpio_chip *gpiochip,
+		struct irq_chip *irqchip,
+		int parent_irq);
+
 int _gpiochip_irqchip_add(struct gpio_chip *gpiochip,
 			  struct irq_chip *irqchip,
 			  unsigned int first_irq,
 			  irq_flow_handler_t handler,
 			  unsigned int type,
+			  bool nested,
 			  struct lock_class_key *lock_key);
 
+/* FIXME: I assume threaded IRQchips do not have the lockdep problem */
+static inline int gpiochip_irqchip_add_nested(struct gpio_chip *gpiochip,
+			  struct irq_chip *irqchip,
+			  unsigned int first_irq,
+			  irq_flow_handler_t handler,
+			  unsigned int type)
+{
+	return _gpiochip_irqchip_add(gpiochip, irqchip, first_irq,
+				     handler, type, true, NULL);
+}
+
 #ifdef CONFIG_LOCKDEP
 #define gpiochip_irqchip_add(...)				\
 (								\
 	({							\
 		static struct lock_class_key _key;		\
-		_gpiochip_irqchip_add(__VA_ARGS__, &_key);	\
+		_gpiochip_irqchip_add(__VA_ARGS__, false, &_key); \
 	})							\
 )
 #else
 #define gpiochip_irqchip_add(...)				\
-	_gpiochip_irqchip_add(__VA_ARGS__, NULL)
+	_gpiochip_irqchip_add(__VA_ARGS__, false, NULL)
 #endif
 
 #endif /* CONFIG_GPIOLIB_IRQCHIP */

tools/gpio/gpio-hammer.c

@@ -23,54 +23,31 @@
 #include <getopt.h>
 #include <sys/ioctl.h>
 #include <linux/gpio.h>
+#include "gpio-utils.h"
 
 int hammer_device(const char *device_name, unsigned int *lines, int nlines,
 		  unsigned int loops)
 {
-	struct gpiohandle_request req;
 	struct gpiohandle_data data;
-	char *chrdev_name;
 	char swirr[] = "-\\|/";
 	int fd;
 	int ret;
 	int i, j;
 	unsigned int iteration = 0;
 
-	ret = asprintf(&chrdev_name, "/dev/%s", device_name);
+	memset(&data.values, 0, sizeof(data.values));
+	ret = gpiotools_request_linehandle(device_name, lines, nlines,
+					   GPIOHANDLE_REQUEST_OUTPUT, &data,
+					   "gpio-hammler");
 	if (ret < 0)
-		return -ENOMEM;
+		goto exit_error;
+	else
+		fd = ret;
 
-	fd = open(chrdev_name, 0);
-	if (fd == -1) {
-		ret = -errno;
-		fprintf(stderr, "Failed to open %s\n", chrdev_name);
-		goto exit_close_error;
-	}
-
-	/* Request lines as output */
-	for (i = 0; i < nlines; i++)
-		req.lineoffsets[i] = lines[i];
-	req.flags = GPIOHANDLE_REQUEST_OUTPUT; /* Request as output */
-	strcpy(req.consumer_label, "gpio-hammer");
-	req.lines = nlines;
-	ret = ioctl(fd, GPIO_GET_LINEHANDLE_IOCTL, &req);
-	if (ret == -1) {
-		ret = -errno;
-		fprintf(stderr, "Failed to issue GET LINEHANDLE "
-			"IOCTL (%d)\n",
-			ret);
+	ret = gpiotools_get_values(fd, &data);
+	if (ret < 0)
 		goto exit_close_error;
-	}
 
-	/* Read initial states */
-	ret = ioctl(req.fd, GPIOHANDLE_GET_LINE_VALUES_IOCTL, &data);
-	if (ret == -1) {
-		ret = -errno;
-		fprintf(stderr, "Failed to issue GPIOHANDLE GET LINE "
-			"VALUES IOCTL (%d)\n",
-			ret);
-		goto exit_close_error;
-	}
 	fprintf(stdout, "Hammer lines [");
 	for (i = 0; i < nlines; i++) {
 		fprintf(stdout, "%d", lines[i]);
@@ -92,23 +69,14 @@ int hammer_device(const char *device_name, unsigned int *lines, int nlines,
 		for (i = 0; i < nlines; i++)
 			data.values[i] = !data.values[i];
 
-		ret = ioctl(req.fd, GPIOHANDLE_SET_LINE_VALUES_IOCTL, &data);
-		if (ret == -1) {
-			ret = -errno;
-			fprintf(stderr, "Failed to issue GPIOHANDLE SET LINE "
-				"VALUES IOCTL (%d)\n",
-				ret);
+		ret = gpiotools_set_values(fd, &data);
+		if (ret < 0)
 			goto exit_close_error;
-		}
+
 		/* Re-read values to get status */
-		ret = ioctl(req.fd, GPIOHANDLE_GET_LINE_VALUES_IOCTL, &data);
-		if (ret == -1) {
-			ret = -errno;
-			fprintf(stderr, "Failed to issue GPIOHANDLE GET LINE "
-				"VALUES IOCTL (%d)\n",
-				ret);
+		ret = gpiotools_get_values(fd, &data);
+		if (ret < 0)
 			goto exit_close_error;
-		}
 
 		fprintf(stdout, "[%c] ", swirr[j]);
 		j++;
@@ -132,9 +100,8 @@ int hammer_device(const char *device_name, unsigned int *lines, int nlines,
 	ret = 0;
 
 exit_close_error:
-	if (close(fd) == -1)
-		perror("Failed to close GPIO character device file");
-	free(chrdev_name);
+	gpiotools_release_linehandle(fd);
+exit_error:
 	return ret;
 }
 

tools/gpio/gpio-utils.c

@@ -2,10 +2,266 @@
  * GPIO tools - helpers library for the GPIO tools
  *
  * Copyright (C) 2015 Linus Walleij
+ * Copyright (C) 2016 Bamvor Jian Zhang
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License version 2 as published by
  * the Free Software Foundation.
  */
 
+#include <unistd.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include <errno.h>
+#include <string.h>
+#include <fcntl.h>
+#include <getopt.h>
+#include <sys/ioctl.h>
+#include <linux/gpio.h>
 #include "gpio-utils.h"
+
+#define COMSUMER "gpio-utils"
+
+/**
+ * doc: Operation of gpio
+ *
+ * Provide the api of gpiochip for chardev interface. There are two
+ * types of api.  The first one provide as same function as each
+ * ioctl, including request and release for lines of gpio, read/write
+ * the value of gpio. If the user want to do lots of read and write of
+ * lines of gpio, user should use this type of api.
+ *
+ * The second one provide the easy to use api for user. Each of the
+ * following api will request gpio lines, do the operation and then
+ * release these lines.
+ */
+/**
+ * gpiotools_request_linehandle() - request gpio lines in a gpiochip
+ * @device_name:	The name of gpiochip without prefix "/dev/",
+ *			such as "gpiochip0"
+ * @lines:		An array desired lines, specified by offset
+ *			index for the associated GPIO device.
+ * @nline:		The number of lines to request.
+ * @flag:		The new flag for requsted gpio. Reference
+ *			"linux/gpio.h" for the meaning of flag.
+ * @data:		Default value will be set to gpio when flag is
+ *			GPIOHANDLE_REQUEST_OUTPUT.
+ * @consumer_label:	The name of consumer, such as "sysfs",
+ *			"powerkey". This is useful for other users to
+ *			know who is using.
+ *
+ * Request gpio lines through the ioctl provided by chardev. User
+ * could call gpiotools_set_values() and gpiotools_get_values() to
+ * read and write respectively through the returned fd. Call
+ * gpiotools_release_linehandle() to release these lines after that.
+ *
+ * Return:		On success return the fd;
+ *			On failure return the errno.
+ */
+int gpiotools_request_linehandle(const char *device_name, unsigned int *lines,
+				 unsigned int nlines, unsigned int flag,
+				 struct gpiohandle_data *data,
+				 const char *consumer_label)
+{
+	struct gpiohandle_request req;
+	char *chrdev_name;
+	int fd;
+	int i;
+	int ret;
+
+	ret = asprintf(&chrdev_name, "/dev/%s", device_name);
+	if (ret < 0)
+		return -ENOMEM;
+
+	fd = open(chrdev_name, 0);
+	if (fd == -1) {
+		ret = -errno;
+		fprintf(stderr, "Failed to open %s\n", chrdev_name);
+		goto exit_close_error;
+	}
+
+	for (i = 0; i < nlines; i++)
+		req.lineoffsets[i] = lines[i];
+
+	req.flags = flag;
+	strcpy(req.consumer_label, consumer_label);
+	req.lines = nlines;
+	if (flag & GPIOHANDLE_REQUEST_OUTPUT)
+		memcpy(req.default_values, data, sizeof(req.default_values));
+
+	ret = ioctl(fd, GPIO_GET_LINEHANDLE_IOCTL, &req);
+	if (ret == -1) {
+		ret = -errno;
+		fprintf(stderr, "Failed to issue GET LINEHANDLE IOCTL (%d)\n",
+			ret);
+	}
+
+exit_close_error:
+	if (close(fd) == -1)
+		perror("Failed to close GPIO character device file");
+	free(chrdev_name);
+	return ret < 0 ? ret : req.fd;
+}
+/**
+ * gpiotools_set_values(): Set the value of gpio(s)
+ * @fd:			The fd returned by
+ *			gpiotools_request_linehandle().
+ * @data:		The array of values want to set.
+ *
+ * Return:		On success return 0;
+ *			On failure return the errno.
+ */
+int gpiotools_set_values(const int fd, struct gpiohandle_data *data)
+{
+	int ret;
+
+	ret = ioctl(fd, GPIOHANDLE_SET_LINE_VALUES_IOCTL, data);
+	if (ret == -1) {
+		ret = -errno;
+		fprintf(stderr, "Failed to issue %s (%d)\n",
+			"GPIOHANDLE_SET_LINE_VALUES_IOCTL", ret);
+	}
+
+	return ret;
+}
+
+/**
+ * gpiotools_get_values(): Get the value of gpio(s)
+ * @fd:			The fd returned by
+ *			gpiotools_request_linehandle().
+ * @data:		The array of values get from hardware.
+ *
+ * Return:		On success return 0;
+ *			On failure return the errno.
+ */
+int gpiotools_get_values(const int fd, struct gpiohandle_data *data)
+{
+	int ret;
+
+	ret = ioctl(fd, GPIOHANDLE_GET_LINE_VALUES_IOCTL, data);
+	if (ret == -1) {
+		ret = -errno;
+		fprintf(stderr, "Failed to issue %s (%d)\n",
+			"GPIOHANDLE_GET_LINE_VALUES_IOCTL", ret);
+	}
+
+	return ret;
+}
+
+/**
+ * gpiotools_release_linehandle(): Release the line(s) of gpiochip
+ * @fd:			The fd returned by
+ *			gpiotools_request_linehandle().
+ *
+ * Return:		On success return 0;
+ *			On failure return the errno.
+ */
+int gpiotools_release_linehandle(const int fd)
+{
+	int ret;
+
+	ret = close(fd);
+	if (ret == -1) {
+		perror("Failed to close GPIO LINEHANDLE device file");
+		ret = -errno;
+	}
+
+	return ret;
+}
+
+/**
+ * gpiotools_get(): Get value from specific line
+ * @device_name:	The name of gpiochip without prefix "/dev/",
+ *			such as "gpiochip0"
+ * @line:		number of line, such as 2.
+ *
+ * Return:		On success return 0;
+ *			On failure return the errno.
+ */
+int gpiotools_get(const char *device_name, unsigned int line)
+{
+	struct gpiohandle_data data;
+	unsigned int lines[] = {line};
+
+	gpiotools_gets(device_name, lines, 1, &data);
+	return data.values[0];
+}
+
+
+/**
+ * gpiotools_gets(): Get values from specific lines.
+ * @device_name:	The name of gpiochip without prefix "/dev/",
+ *			such as "gpiochip0".
+ * @lines:		An array desired lines, specified by offset
+ *			index for the associated GPIO device.
+ * @nline:		The number of lines to request.
+ * @data:		The array of values get from gpiochip.
+ *
+ * Return:		On success return 0;
+ *			On failure return the errno.
+ */
+int gpiotools_gets(const char *device_name, unsigned int *lines,
+		   unsigned int nlines, struct gpiohandle_data *data)
+{
+	int fd;
+	int ret;
+	int ret_close;
+
+	ret = gpiotools_request_linehandle(device_name, lines, nlines,
+					   GPIOHANDLE_REQUEST_INPUT, data,
+					   COMSUMER);
+	if (ret < 0)
+		return ret;
+
+	fd = ret;
+	ret = gpiotools_get_values(fd, data);
+	ret_close = gpiotools_release_linehandle(fd);
+	return ret < 0 ? ret : ret_close;
+}
+
+/**
+ * gpiotools_set(): Set value to specific line
+ * @device_name:	The name of gpiochip without prefix "/dev/",
+ *			such as "gpiochip0"
+ * @line:		number of line, such as 2.
+ * @value:		The value of gpio, must be 0(low) or 1(high).
+ *
+ * Return:		On success return 0;
+ *			On failure return the errno.
+ */
+int gpiotools_set(const char *device_name, unsigned int line,
+		  unsigned int value)
+{
+	struct gpiohandle_data data;
+	unsigned int lines[] = {line};
+
+	data.values[0] = value;
+	return gpiotools_sets(device_name, lines, 1, &data);
+}
+
+/**
+ * gpiotools_sets(): Set values to specific lines.
+ * @device_name:	The name of gpiochip without prefix "/dev/",
+ *			such as "gpiochip0".
+ * @lines:		An array desired lines, specified by offset
+ *			index for the associated GPIO device.
+ * @nline:		The number of lines to request.
+ * @data:		The array of values set to gpiochip, must be
+ *			0(low) or 1(high).
+ *
+ * Return:		On success return 0;
+ *			On failure return the errno.
+ */
+int gpiotools_sets(const char *device_name, unsigned int *lines,
+		   unsigned int nlines, struct gpiohandle_data *data)
+{
+	int ret;
+
+	ret = gpiotools_request_linehandle(device_name, lines, nlines,
+					   GPIOHANDLE_REQUEST_OUTPUT, data,
+					   COMSUMER);
+	if (ret < 0)
+		return ret;
+
+	return gpiotools_release_linehandle(ret);
+}

tools/gpio/gpio-utils.h

@@ -24,4 +24,20 @@ static inline int check_prefix(const char *str, const char *prefix)
 		strncmp(str, prefix, strlen(prefix)) == 0;
 }
 
+int gpiotools_request_linehandle(const char *device_name, unsigned int *lines,
+				 unsigned int nlines, unsigned int flag,
+				 struct gpiohandle_data *data,
+				 const char *consumer_label);
+int gpiotools_set_values(const int fd, struct gpiohandle_data *data);
+int gpiotools_get_values(const int fd, struct gpiohandle_data *data);
+int gpiotools_release_linehandle(const int fd);
+
+int gpiotools_get(const char *device_name, unsigned int line);
+int gpiotools_gets(const char *device_name, unsigned int *lines,
+		   unsigned int nlines, struct gpiohandle_data *data);
+int gpiotools_set(const char *device_name, unsigned int line,
+		  unsigned int value);
+int gpiotools_sets(const char *device_name, unsigned int *lines,
+		   unsigned int nlines, struct gpiohandle_data *data);
+
 #endif /* _GPIO_UTILS_H_ */