Implements the backend so that the generic driver can TX/RX to/from
the SDIO device.

For RX, when data is ready the SDIO IRQ is fired and that will
allocate an skb, put all the data there and then pass it to the
generic driver RX code for processing and delivery.

TX, when kicked by the generic driver, will schedule work on a
driver-specific workqueue that pulls data from the TX FIFO and sends
it to the device until it drains it.

Thread contexts are needed as SDIO functions are blocking.
Signed-off-by: NInaky Perez-Gonzalez <inaky@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This implements the backends for the generic driver (i2400m) to be
able to load firmware to the SDIO device.
Signed-off-by: NInaky Perez-Gonzalez <inaky@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Implements probe/disconnect for the SDIO device, as well as main
backends for the generic driver to control the SDIO device
(bus_dev_start(), bus_dev_stop() and bus_reset()).
Signed-off-by: NInaky Perez-Gonzalez <inaky@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This contains the common function declaration and constants for the
SDIO driver for the 2400m Wireless WiMAX Connection and it's debug
level settings.
Signed-off-by: NInaky Perez-Gonzalez <inaky@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Implements the backend so that the generic driver can TX/RX to/from
the USB device.

TX is implemented with a kthread sitting in a never-ending loop that
when kicked by the generic driver's TX code will pull data from the TX
FIFO and send it to the device until it drains it. Then it goes back
sleep, waiting for another kick.

RX is implemented in a similar fashion, but reads are kicked in by the
device notifying in the interrupt endpoint that data is ready. Device
reset notifications are also sent via the notification endpoint.

We need a thread contexts to run USB autopm functions (blocking) and
to process the received data (can get to be heavy in processing
time).
Signed-off-by: NInaky Perez-Gonzalez <inaky@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This implements the backends for the generic driver (i2400m) to be
able to load firmware to the USB device.
Signed-off-by: NInaky Perez-Gonzalez <inaky@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Implements probe/disconnect for the USB device, as well as main
backends for the generic driver to control the USB device
(bus_dev_start(), bus_dev_stop() and bus_reset()).
Signed-off-by: NInaky Perez-Gonzalez <inaky@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This contains the common function declaration and constants for the
USB driver for the 2400m Wireless WiMAX Connection, as well as it's
debug level settings.
Signed-off-by: NInaky Perez-Gonzalez <inaky@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Expose knobs to control the device (induce reset, power saving,
querying tx or rx stats, internal debug information and debug level
manipulation).
Signed-off-by: NInaky Perez-Gonzalez <inaky@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This is a collection of functions used to control the device (plus a
few helpers).

There are utilities for handling TLV buffers, hooks on the device's
reports to act on device changes of state [i2400m_report_hook()], on
acks to commands [i2400m_msg_ack_hook()], a helper for sending
commands to the device and blocking until a reply arrives
[i2400m_msg_to_dev()], a few high level commands for manipulating the
device state, powersaving mode and configuration plus the routines to
setup the device once communication is established with it
[i2400m_dev_initialize()].
Signed-off-by: NInaky Perez-Gonzalez <inaky@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Handling of TX/RX data to/from the i2400m device (IP packets, control
and diagnostics). On RX, this parses the received read transaction
from the device, breaks it in chunks and passes it to the
corresponding subsystems (network and control).

Transmission to the device is done through a software FIFO, as
data/control frames can be coalesced (while the device is reading the
previous tx transaction, others accumulate). A FIFO is used because at
the end it is resource-cheaper that scatter/gather over USB. As well,
most traffic is going to be download (vs upload).
Signed-off-by: NInaky Perez-Gonzalez <inaky@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Implements the firmware loader (using the bus-specific driver's
backends for the actual upload). The most critical thing in here is
the piece that puts the device in boot-mode from any other
(undetermined) state, otherwise, it is just pushing the bytes from the
firmware file to the device.
Signed-off-by: NInaky Perez-Gonzalez <inaky@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Implementation of the glue to the network stack so the WiMAX device
shows up as an Ethernet device.

Initially we shot for implementing a Pure IP device -- however, the
world seems to turn around Ethernet devices. Main issues were with the
ISC DHCP client and servers (as they don't understand types other than
Ethernet and Token Ring).

We proceeded to register with IANA the PureIP hw type, so that DHCP
requests could declare such. We also created patches to the main ISC
DHCP versions to support it. However, until all that permeates into
deployments, there is going to be a long time.

So we moved back to wrap Ethernet frames around the PureIP device. At
the time being this has overhead; we need to reallocate with space for
an Ethernet header. The reason is the device-to-host protocol
coalesces many network packets into a single message, so we can't
introduce Ethernet headers without overwriting valid data from other
packets.

Coming-soon versions of the firmware have this issue solved.
Signed-off-by: NInaky Perez-Gonzalez <inaky@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Implements the generic probe and disconnect functions that will be
called by the USB and SDIO driver's probe/disconnect functions.

Implements the backends for the WiMAX stack's basic operations:
message passing, rfkill control and reset.
Signed-off-by: NInaky Perez-Gonzalez <inaky@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The wimax/i2400m.h defines the structures and constants for the
host-device protocols:

 - boot / firmware upload protocol

 - general data transport protocol

 - control protocol

It is done in such a way that can also be used verbatim by user space.

drivers/net/wimax/i2400m.h defines all the APIs used by the core,
bus-generic driver (i2400m) and the bus specific drivers
(i2400m-BUSNAME). It also gives a roadmap to the driver
implementation.

debug-levels.h adds the core driver's debug settings.
Signed-off-by: NInaky Perez-Gonzalez <inaky@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The driver for the i2400m is a stacked driver. There is a core driver,
the bus-generic driver that has no knowledge or dependencies on how
the device is connected to the system; it only knows how to speak the
device protocol. Then there are the bus-specific drivers (for USB and
SDIO) that provide backends for the generic driver to communicate with
the device.

The bus generic driver connects to the network and WiMAX stacks on the
top side, and on the bottom to the bus-specific drivers.
Signed-off-by: NInaky Perez-Gonzalez <inaky@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch provides Makefile and KConfig for the WiMAX stack,
integrating them into the networking stack's Makefile, Kconfig and
doc-book templates.
Signed-off-by: NInaky Perez-Gonzalez <inaky@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Expose knobs to control the stack's debug output.
Signed-off-by: NInaky Perez-Gonzalez <inaky@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Implements the three basic operations provided by the stack's control
interface to WiMAX devices:

- Messaging channel between user space and driver/device

  This implements a direct communication channel between user space
  and the driver/device, by which free form messages can be sent back
  and forth.

  This is intended for device-specific features, vendor quirks, etc.

- RF-kill framework integration

  Provide most of the RF-Kill integration for WiMAX drivers so that
  all device drivers have to do is after wimax_dev_add() is call
  wimax_report_rfkill_{hw,sw}() to update initial state and then every
  time it changes.

  Provides wimax_rfkill() for the kernel to call to set software
  RF-Kill status and/or query current hardware and software switch
  status.

  Exports wimax_rfkill() over generic netlink to user space.

- Reset a WiMAX device

  Provides wimax_reset() for the kernel to reset a wimax device as
  needed and exports it over generic netlink to user space.

This API is clearly limited, as it still provides no way to do the
basic scan, connect and disconnect in a hardware independent way.  The
WiMAX case is more complex than WiFi due to the way networks are
discovered and provisioned.

The next developments are to add the basic operations so they can be
offerent by different drivers. However, we'd like to get more vendors
to jump in and provide feedback of how the user/kernel API/abstraction
layer should be.

The user space code for the i2400m, as of now, uses the messaging
channel, but that will change as the API evolves.
Signed-off-by: NInaky Perez-Gonzalez <inaky@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add an EXPORT_SYMBOL() to genl_unregister_mc_group(), to allow
unregistering groups on the run. EXPORT_SYMBOL_GPL() is not used as
the rest of the functions exported by this module (eg:
genl_register_mc_group) are also not _GPL().

Cleanup is currently done when unregistering a family, but there is
no way to unregister a single multicast group due to that function not
being exported. Seems to be a mistake as it is documented as for
external consumption.

This is needed by the WiMAX stack to be able to cleanup unused mc
groups.
Signed-off-by: NInaky Perez-Gonzalez <inaky@linux.intel.com>
Acked-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Implements the basic life cycles of a 'struct wimax_dev', some common
generic netlink functionality for marshalling calls to user space,
and the device state machine.

For looking up net devices based on their generic netlink family IDs,
use a low overhead method that optimizes for the case where most
systems have a single WiMAX device, or at most, a very low number of
WiMAX adaptors.
Signed-off-by: NInaky Perez-Gonzalez <inaky@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This file contains a simple debug framework that is used in the stack;
it allows the debug level to be controlled at compile-time (so the
debug code is optimized out) and at run-time (for what wasn't compiled
out).

This is eventually going to be moved to use dynamic_printk(). Just
need to find time to do it.
Signed-off-by: NInaky Perez-Gonzalez <inaky@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This file contains declarations and definitions used by the different
submodules of the stack.
Signed-off-by: NInaky Perez-Gonzalez <inaky@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Definitions for the user/kernel API protocol through generic
netlink. User space can copy it verbatim and use it.

Kernel API definition declares the main data types and calls for the
drivers to integrate into the WiMAX stack. Provides usage
documentation.
Signed-off-by: NInaky Perez-Gonzalez <inaky@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

wimax documentation
Signed-off-by: NInaky Perez-Gonzalez <inaky@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

In the same spirit as debugfs_create_*(), introduce helpers for
exporting size_t values over debugfs.

The only trick done is that the format verifier is kept at %llu
instead of %zu; otherwise type warnings would pop up:

format ‘%zu’ expects type ‘size_t’, but argument 2 has type ‘long long unsigned int’

There is no real way to fix this one--however, we can consider %llu
and %zu to be compatible if we consider that we are using the same for
validating in debugfs_create_{x,u}{8,16,32}().
Signed-off-by: NInaky Perez-Gonzalez <inaky@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

USB should not be having it's own printk macros, so remove info() and
use the system-wide standard of dev_info() wherever possible.

No one in the tree is using the macro, so it can now be removed.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

USB should not be having it's own printk macros, so remove warn() and
use the system-wide standard of dev_warn() wherever possible.  In the
few places that will not work out, use a basic printk().

Now that all in-tree users are gone, remove the macro.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This driver got rescued from a few years ago and was requested to be
added.  So I cleaned it up, ported it to the latest kernel version and
here it is.

Cc: Thomas Hergenhahn <thomas.hergenhahn@suse.de>
Cc: Emmanuele <iemmav@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This is for the serial mode of the Opticon barcode scanner.

Cc: Kees Stoop <kees.stoop@opticon.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix oops introduced by commit ae93a55b
(emi26: use request_firmware()):

usb 1-1: new full speed USB device using uhci_hcd and address 2
usb 1-1: configuration #1 chosen from 1 choice
emi26 - firmware loader 1-1:1.0: emi26_probe start
usb 1-1: firmware: requesting emi26/loader.fw
usb 1-1: firmware: requesting emi26/bitstream.fw
usb 1-1: firmware: requesting emi26/firmware.fw
usb 1-1: emi26_set_reset - 1
usb 1-1: emi26_set_reset - 0
BUG: unable to handle kernel NULL pointer dereference at 00000000
IP: [<f80dc487>] emi26_probe+0x2f7/0x620 [emi26]
*pde = 00000000
Oops: 0000 [#1] SMP
last sysfs file: /sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/firmware/1-1/loading
Modules linked in: emi26(+) ipv6 cpufreq_ondemand coretemp arc4 ecb iwl3945 irtty_sir sir_dev nsc_ircc ehci_hcd uhci_hcd mac80211 irda usbcore snd_hda_intel thinkpad_acpi rfkill hwmon led_class e1000e snd_pcm cfg80211 snd_timer crc_ccitt snd snd_page_alloc aes_generic

Pid: 5082, comm: modprobe Not tainted (2.6.28 #2) 17023QG
EIP: 0060:[<f80dc487>] EFLAGS: 00010206 CPU: 0
EIP is at emi26_probe+0x2f7/0x620 [emi26]
EAX: 0000015c EBX: 00000000 ECX: c1ffd9c0 EDX: 00000000
ESI: 0000015c EDI: f6bb215c EBP: f6bb0400 ESP: f00ebcfc
 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
Process modprobe (pid: 5082, ti=f00ea000 task=f5c7c700 task.ti=f00ea000)
Stack:
 0000015c 000000a5 f6a67cb8 f80dc7e0 c01c6262 fbef2986 f6bb2000 00008fe0
 0000015c f715f748 f715f740 f715f738 f715f748 f6a67c00 f80dd040 f80dcfc0
 f6bb0400 fbacb290 f6a67c94 fbae0160 c01c70bf 00000000 f6a67c1c 00000000
Call Trace:
 [<c01c6262>] sysfs_add_one+0x12/0x50
 [<fbacb290>] usb_probe_interface+0xa0/0x140 [usbcore]
 [<c01c70bf>] sysfs_create_link+0xf/0x20
 [<c02dead2>] driver_probe_device+0x82/0x180
 [<fbac9eeb>] usb_match_id+0x3b/0x50 [usbcore]
 [<c02dec4e>] __driver_attach+0x7e/0x80
 [<c02de27a>] bus_for_each_dev+0x3a/0x60
 [<c02de956>] driver_attach+0x16/0x20
 [<c02debd0>] __driver_attach+0x0/0x80
 [<c02de7b1>] bus_add_driver+0x1a1/0x220
 [<c02dee4d>] driver_register+0x4d/0x120
 [<c024e622>] idr_get_empty_slot+0xf2/0x290
 [<fbacab71>] usb_register_driver+0x81/0x100 [usbcore]
 [<f806c000>] emi26_init+0x0/0x14 [emi26]
 [<c0101126>] do_one_initcall+0x36/0x1b0
 [<c01c5e70>] sysfs_ilookup_test+0x0/0x10
 [<c0197a61>] ifind+0x31/0x90
 [<c01c6229>] __sysfs_add_one+0x59/0x80
 [<c01c64e4>] sysfs_addrm_finish+0x14/0x1c0
 [<c0175ca3>] __vunmap+0xa3/0xd0
 [<c014b854>] load_module+0x1544/0x1640
 [<c014b9d7>] sys_init_module+0x87/0x1b0
 [<c0187f41>] sys_read+0x41/0x70
 [<c01032a5>] sysenter_do_call+0x12/0x21
 [<c03d0000>] wait_for_common+0x40/0x110
Code: 66 c1 e8 08 66 09 d0 75 a5 31 d2 89 e8 e8 72 fc ff ff 85 c0 0f 88 9a 02 00 00 b8 fa 00 00 00 e8 30 46 05 c8 8b 74 24 28 8b 5e 04 <8b> 03 89 44 24 1c 0f c8 89 44 24 1c 0f b7 4b 04 c7 44 24 20 00
EIP: [<f80dc487>] emi26_probe+0x2f7/0x620 [emi26] SS:ESP 0068:f00ebcfc
---[ end trace 2eefa13825431230 ]---

After the last "package" of firmware data is sent to the device, we dereference
NULL pointer (on access to rec->addr). Fix it.
Reported--by: NDavid Flatz <david@upcs.at>
Tested-by: NDavid Flatz <david@upcs.at>
Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: stable <stable@kernel.org> [2.6.27, 2.6.28]
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The usb gadget framework revealed weakness in the godu_udc
gadget driver register function. Instead of checking if
speed asked for was USB_LOW_SPEED upon usb_gadget_register()
to deny service, it checked only for USB_FULL_SPEED, thus
denying service to usb high speed capable gadgets.
Signed-off-by: NSangSu Park <sangsu@gmail.com>
Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

One minor nit did show up, though.  The patch below
seems to make more sense than the code does without it.
Signed-off-by: NMark Lord <mlord@pobox.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1197) fixes an error introduced recently.  Since a
significant number of devices can't handle Set-Interface requests, we
no longer call usb_set_interface() when a driver unbinds from an
interface, provided the interface is already in altsetting 0.  However
the interface still does get disabled, and the call to
usb_set_interface() was the only thing re-enabling it.  Since the
interface doesn't get re-enabled, further attempts to use it fail.

So the patch adds a call to usb_enable_interface() when a driver
unbinds and the interface is in altsetting 0.  For this to work
right, the interface's endpoints have to be re-enabled but their
toggles have to be left alone.  Therefore an additional argument is
added to usb_enable_endpoint() and usb_enable_interface(), a flag
indicating whether or not the endpoint toggles should be reset.

This is a forward-ported version of a patch which fixes Bugzilla
#12301.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Reported-by: NDavid Roka <roka@dawid.hu>
Reported-by: NErik Ekman <erik@kryo.se>
Tested-by: NErik Ekman <erik@kryo.se>
Tested-by: NAlon Bar-Lev <alon.barlev@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1195) eliminates a potential problem identified by
Oliver Neukum.  When a driver queues an asynchronous Set-Config
request using usb_driver_set_configuration(), the request should be
cancelled if userspace changes the configuration first.  The patch
introduces a linked list of pending async Set-Config requests, and
uses it to invalidate the requests for a particular device whenever
that device's configuration is set.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Cc: Oliver Neukum <oliver@neukum.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1193b) enables wakeup during initialization for all PCI
host controllers, and it removes some code (and comments!) that are no
longer needed now that the PCI core automatically initializes wakeup
settings for all new devices.

The idea is that the bus should initialize wakeup, and the bus glue
or controller driver should enable it.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1192) rearranges the USB PCI host controller suspend and
resume and resume routines:

	Use pci_wake_from_d3() for enabling and disabling wakeup,
	instead of pci_enable_wake().

	Carry out the actual state change while interrupts are
	disabled.

	Change the order of the preparations to agree with the
	general recommendation for PCI devices, instead of
	messing around with the wakeup settings while the device
	is in D3.

		In .suspend:
			Call the underlying driver to disable IRQ
				generation;
			pci_wake_from_d3(device_may_wakeup());
			pci_disable_device();

		In .suspend_late:
			pci_save_state();
			pci_set_power_state(D3hot);
			(for PPC_PMAC) Disable ASIC clocks

		In .resume_early:
			(for PPC_PMAC) Enable ASIC clocks
			pci_set_power_state(D0);
			pci_restore_state();

		In .resume:
			pci_enable_device();
			pci_set_master();
			pci_wake_from_d3(0);
			Call the underlying driver to reenable IRQ
				generation

	Add the necessary .suspend_late and .resume_early method
	pointers to the PCI host controller drivers.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
CC: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1194) makes usb-storage set the CAPACITY_HEURISTICS flag
for all devices made by Nokia, Nikon, or Motorola.  These companies
seem to include the READ CAPACITY bug in all of their devices.

Since cell phones and digital cameras rely on flash storage, which
always has an even number of sectors, setting CAPACITY_HEURISTICS
shouldn't cause any problems.  Not even if the companies wise up and
start making devices without the bug.

A large number of unusual_devs entries are now unnecessary, so the
patch removes them.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1190) makes usb-storage's "quirks=" module parameter
writable, so that users can add entries for their devices at runtime
with no need to reboot or reload usb-storage.

New codes are added for the SANE_SENSE, CAPACITY_HEURISTICS, and
CAPACITY_OK flags.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1189b) adds some hacks to usb-storage for dealing with
the growing problems involving bad capacity values and last-sector
accesses:

	A new flag, US_FL_CAPACITY_OK, is created to indicate that
	the device is known to report its capacity correctly.  An
	unusual_devs entry for Linux's own File-backed Storage Gadget
	is added with this flag set, since g_file_storage always
	reports the correct capacity and since the capacity need
	not be even (it is determined by the size of the backing
	file).

	An entry in unusual_devs.h which has only the CAPACITY_OK
	flag set shouldn't prejudice libusual, since the device will
	work perfectly well with either usb-storage or ub.  So a
	new macro, COMPLIANT_DEV, is added to let libusual know
	about these entries.

	When a last-sector access succeeds and the total number of
	sectors is odd (the unexpected case, in which guessing that
	the number is even might cause trouble), a WARN is triggered.
	The kerneloops.org project will collect these warnings,
	allowing us to add CAPACITY_OK flags for the devices in
	question before implementing the default-to-even heuristic.
	If users want to prevent the stack dump produced by the WARN,
	they can disable the hack by adding an unusual_devs entry
	for their device with the CAPACITY_OK flag.

	When a last-sector access fails three times in a row and
	neither the FIX_CAPACITY nor the CAPACITY_OK flag is set,
	we assume the last-sector bug is present.  We replace the
	existing status and sense data with values that will cause
	the SCSI core to fail the access immediately rather than
	retry indefinitely.  This should fix the difficulties
	people have been having with Nokia phones.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>