- 19 8月, 2013 7 次提交
-
-
由 Vikas Sajjan 提交于
Add pin state information for DP HPD support that requires pin configuration support using pinctrl interface. Signed-off-by: NVikas Sajjan <vikas.sajjan@linaro.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Vikas Sajjan 提交于
Adds DP controller DT node to exynos5420 SoC Signed-off-by: NVikas Sajjan <vikas.sajjan@linaro.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Vikas Sajjan 提交于
Moves the properties of DP controller to exynos5.dtsi which are common across exynos5 SoCs like Exynos5250 and Exynos5420. The PHY DP Node is based on Jingoo Han's <jg1.han@samsung.com> patch at https://patchwork.linuxtv.org/patch/19189/Signed-off-by: NVikas Sajjan <vikas.sajjan@linaro.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Vikas Sajjan 提交于
Adds FIMD DT node to exynos5420 based SMDK. Also adds display-timimg information node. Signed-off-by: NVikas Sajjan <vikas.sajjan@linaro.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Yadwinder Singh Brar 提交于
Add DT nodes for gsc, isp, mfc, disp, mau, g2d and msc PM domains. Signed-off-by: NYadwinder Singh Brar <yadi.brar@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Vikas Sajjan 提交于
Moves the properties of FIMD DT node which are common across Exynos5 based SoCs like Exynos5250 and Exynos5420 to exynos5.dtsi Signed-off-by: NVikas Sajjan <vikas.sajjan@linaro.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Vikas Sajjan 提交于
As the display-timing information is parsed by FIMD driver, it makes sense to move the display-timing DT node inside FIMD DT node for exynos5250 Signed-off-by: NVikas Sajjan <vikas.sajjan@linaro.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 07 8月, 2013 5 次提交
-
-
由 Andrzej Hajda 提交于
Add MAX8998 LDO12 and fixed voltage regulator nodes. While at it, all fixed voltage regulator nodes are grouped in a 'regulators' node. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Reviewed-by: NTomasz Figa <t.figa@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Andrzej Hajda 提交于
Add pinctrl nodes for the camera parallel port CAM_A data bus and the CAM_A_CLKOUT clock output pin. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Reviewed-by: NTomasz Figa <t.figa@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Sylwester Nawrocki 提交于
Enable FIMC devices on the Trats board. This allows using the device in memory-to-memory mode only. The camera port pinctrl property is now empty and will be updated while support for the camera sensors is added. Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Reviewed-by: NTomasz Figa <t.figa@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Sylwester Nawrocki 提交于
Add common camera node and detailed properties for the Exynos4210 FIMC devices. Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Reviewed-by: NTomasz Figa <t.figa@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Andrzej Hajda 提交于
This patch add dts entries required for the SPI bus used for firware upload by the S5C73M3 camera. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 06 8月, 2013 8 次提交
-
-
由 Sylwester Nawrocki 提交于
This patch enables the front camera using the internal camera ISP (FIMC-IS). Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Reviewed-by: NTomasz Figa <t.figa@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Jacek Anaszewski 提交于
This patch adds AK8975 magnetometer node and corresponding i2c-gpio bus node for TRATS2 board. Signed-off-by: NJacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: NTomasz Figa <t.figa@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Sylwester Nawrocki 提交于
Add common camera node and Exynos4212/4412 specific nodes for FIMC, MIPI-CSIS, FIMC-LITE and FIMC-IS devices. Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Reviewed-by: NTomasz Figa <t.figa@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Sylwester Nawrocki 提交于
This patch adds common Exynos4 SoC series FIMC and MIPI CSIS device nodes. Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Reviewed-by: NTomasz Figa <t.figa@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Sylwester Nawrocki 提交于
The Exynos4 SPI controller has migrated to the generic DMA bindings since commit b5be04d3("spi: s3c64xx: Modify SPI driver to use generic DMA DT support"). Use the generic bindings to specify the corresponding DMA to make the SPI usable again on Exynos4x12 SoCs. Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Reviewed-by: NTomasz Figa <t.figa@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Sylwester Nawrocki 提交于
The ISP power domain is a common power domain for FIMC-LITE and FIMC-IS (camera ISP) devices. Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Reviewed-by: NTomasz Figa <t.figa@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Sylwester Nawrocki 提交于
Add pinctrl nodes for the ISP I2C0, ISP I2C1 and ISP UART devices. Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Reviewed-by: NTomasz Figa <t.figa@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Sylwester Nawrocki 提交于
Add separate nodes for the CAMCLK pin and turn off pull-up on camera ports A, B. The video bus pins and the clock output (CAMCLK) pin need separate nodes since full camera port is not used in some configurations, e.g. for MIPI CSI-2 bus only CAMCLK is required and data/clock signal use separate dedicated pins. Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Reviewed-by: NTomasz Figa <t.figa@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 31 7月, 2013 1 次提交
-
-
由 Sachin Kamat 提交于
Adds G2D node to exynos5250 DT file. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 24 7月, 2013 7 次提交
-
-
由 Amit Daniel Kachhap 提交于
This patch adds device node for TMU controller. There are 3 instances of the controllers so 3 nodes are created. Acked-by: NJonghwa Lee <jonghwa3.lee@samsung.com> Reviewed-by: NEduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: NAmit Daniel Kachhap <amit.daniel@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Tomasz Figa 提交于
This patch introduces device tree sources for Samsung Trats 2 board based on Exynos4412 SoC. Currently support includes: - eMMC, - main PMIC (max77686), - serial ports, - GPIO keys, - touchscreen. Signed-off-by: NTomasz Figa <t.figa@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
Re-ordering in alphabetical. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Mark Brown 提交于
The default audio module for the Arndale has a WM1811A on it. Add this to the device tree bindings. Signed-off-by: NMark Brown <broonie@linaro.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Mark Brown 提交于
As part of this add nodes for the main wall supply as well as bucks 7 and 8 which are used to drop that down for several of the LDOs. Signed-off-by: NMark Brown <broonie@linaro.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Mark Brown 提交于
Fixed voltage regulators (and other similar free standing things) are supposed to go on a simple-bus for DT correctness reasons. Signed-off-by: NMark Brown <broonie@linaro.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Mark Brown 提交于
The out of tree code configures a pullup on the line indicating that it is an active low interrupt. Signed-off-by: NMark Brown <broonie@linaro.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 13 7月, 2013 3 次提交
-
-
由 Al Viro 提交于
[suggested by Rasmus Villemoes] make O_DIRECTORY | O_RDWR part of O_TMPFILE; that will fail on old kernels in a lot more cases than what I came up with. And make sure O_CREAT doesn't get there... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Olof Johansson 提交于
OMAP recently changed how the platforms are configured, so OMAP2/3/4 SoC support is no longer enabled by default. Add them back. Enable new ethernet driver for sunxi. The i.MX console options moved due to resorting, no functional change. Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Vincent Stehlé 提交于
- Add i.MX serial console support. This gives us the boot messages on UART on e.g. the i.MX6Q sabre sd platform. - Add the necessary config options, to allow booting with NFS root on an i.MX6 sabre sd. - Add Freescale LPUART serial console support. This gives us the boot messages on UART on e.g. the Vybrid VF610 Tower board. Signed-off-by: NVincent Stehlé <vincent.stehle@freescale.com> Cc: Russell King <linux@arm.linux.org.uk> [olof: squashed three commits down to one] Signed-off-by: NOlof Johansson <olof@lixom.net>
-
- 12 7月, 2013 3 次提交
-
-
由 Dave Hansen 提交于
I completely botched understanding the calling conventions of do_div(). I assumed that do_div() returned the result instead of realizing that it modifies its argument and returns a remainder. The side-effect from this would be bogus numbers for the "msecs" value in the warning messages: INFO: NMI handler (perf_event_nmi_handler) took too long to run: 0.114 msecs Note, there was a second fix posted by Stephane Eranian for a separate patch which I also botched: http://lkml.kernel.org/r/20130704223010.GA30625@quadSigned-off-by: NDave Hansen <dave.hansen@linux.intel.com> Cc: Dave Hansen <dave@sr71.net> Link: http://lkml.kernel.org/r/20130708214404.B0B6EA66@viggo.jf.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Russell King 提交于
The watchdog infrastructure in Dove is no different from that in Orion5x or Kirkwood, so let's enable it for Dove. The only things missing are a few register settings in Dove's bridge-regs.h. Rather than duplicating the same register bit masks for the RSTOUTn_MASK and BRIDGE_CAUSE registers, move the definitions into the watchdog driver itself. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Acked-by: NJason Cooper <jason@lakedaemon.net> Tested-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Viresh Kumar 提交于
Interrupt request doesn't use the right API: The TWD watchdog uses a per-cpu interrupt (usually interrupt #30), and the GIC configuration should flag it as such. With this setup, request_irq() should fail, and the right API is request_percpu_irq(), together with enable_percpu_irq()/disable_percpu_irq(). Nothing ensures the userspace ioctl() will end-up kicking the watchdog on the right CPU. There are no users of this driver since a long time and it makes more sense to get rid of it as nobody is looking to fix it. In case somebody wakes up after this has been removed and needs it, please revert this driver and pick these updates (These were never pushed to mainline): http://comments.gmane.org/gmane.linux.ports.arm.kernel/245998Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org> Acked-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
- 11 7月, 2013 5 次提交
-
-
由 Michel Lespinasse 提交于
Since all architectures have been converted to use vm_unmapped_area(), there is no remaining use for the free_area_cache. Signed-off-by: NMichel Lespinasse <walken@google.com> Acked-by: NRik van Riel <riel@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Howells <dhowells@redhat.com> Cc: Helge Deller <deller@gmx.de> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Eliezer Tamir 提交于
Rename LL_SO to BUSY_POLL_SO Rename sysctl_net_ll_{read,poll} to sysctl_busy_{read,poll} Fix up users of these variables. Fix documentation for sysctl. a patch for the socket.7 man page will follow separately, because of limitations of my mail setup. Signed-off-by: NEliezer Tamir <eliezer.tamir@linux.intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Olivier DANET 提交于
Commit e4c6bfd2 ("mm: rearrange vm_area_struct for fewer cache misses") changed the layout of the vm_area_struct structure, it broke several SPARC32 assembly routines which used numerical constants for accessing the vm_mm field. This patch defines the VMA_VM_MM constant to replace the immediate values. Signed-off-by: NOlivier DANET <odanet@caramail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andreas Larsson 提交于
Even if data snooping is enabled, without separate snoop tags snooping will not work when the MMU is enabled. Signed-off-by: NAndreas Larsson <andreas@gaisler.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Chen Gang 提交于
For the related next strcpy(), the destination length is less than 512, but the source maximize length may be 'OPROMMAXPARAM' (4096) which is more than 512. One work flow may: openprom_sunos_ioctl() -> if (cmd == OPROMSETOPT) getstrings() -> will alloc buffer with size 'OPROMMAXPARAM'. opromsetopt() -> devide the buffer into 'var' and 'value' of_set_property() -> pass prom_setprop() -> pass ldom_set_var() And do not mind the additional 4 alignment buffer increasing, since 'sizeof(pkt) - sizeof(pkt.header)' is 4 alignment at least. Signed-off-by: NChen Gang <gang.chen@asianux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 7月, 2013 1 次提交
-
-
由 Michal Simek 提交于
The reason is that other applications like strace think that every __NR_xx is syscall. Also __NR_syscalls is not used by user applications/libs. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-