- 19 8月, 2013 7 次提交
-
-
由 Vikas Sajjan 提交于
Add pin state information for DP HPD support that requires pin configuration support using pinctrl interface. Signed-off-by: NVikas Sajjan <vikas.sajjan@linaro.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Vikas Sajjan 提交于
Adds DP controller DT node to exynos5420 SoC Signed-off-by: NVikas Sajjan <vikas.sajjan@linaro.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Vikas Sajjan 提交于
Moves the properties of DP controller to exynos5.dtsi which are common across exynos5 SoCs like Exynos5250 and Exynos5420. The PHY DP Node is based on Jingoo Han's <jg1.han@samsung.com> patch at https://patchwork.linuxtv.org/patch/19189/Signed-off-by: NVikas Sajjan <vikas.sajjan@linaro.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Vikas Sajjan 提交于
Adds FIMD DT node to exynos5420 based SMDK. Also adds display-timimg information node. Signed-off-by: NVikas Sajjan <vikas.sajjan@linaro.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Yadwinder Singh Brar 提交于
Add DT nodes for gsc, isp, mfc, disp, mau, g2d and msc PM domains. Signed-off-by: NYadwinder Singh Brar <yadi.brar@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Vikas Sajjan 提交于
Moves the properties of FIMD DT node which are common across Exynos5 based SoCs like Exynos5250 and Exynos5420 to exynos5.dtsi Signed-off-by: NVikas Sajjan <vikas.sajjan@linaro.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Vikas Sajjan 提交于
As the display-timing information is parsed by FIMD driver, it makes sense to move the display-timing DT node inside FIMD DT node for exynos5250 Signed-off-by: NVikas Sajjan <vikas.sajjan@linaro.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 07 8月, 2013 5 次提交
-
-
由 Andrzej Hajda 提交于
Add MAX8998 LDO12 and fixed voltage regulator nodes. While at it, all fixed voltage regulator nodes are grouped in a 'regulators' node. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Reviewed-by: NTomasz Figa <t.figa@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Andrzej Hajda 提交于
Add pinctrl nodes for the camera parallel port CAM_A data bus and the CAM_A_CLKOUT clock output pin. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Reviewed-by: NTomasz Figa <t.figa@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Sylwester Nawrocki 提交于
Enable FIMC devices on the Trats board. This allows using the device in memory-to-memory mode only. The camera port pinctrl property is now empty and will be updated while support for the camera sensors is added. Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Reviewed-by: NTomasz Figa <t.figa@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Sylwester Nawrocki 提交于
Add common camera node and detailed properties for the Exynos4210 FIMC devices. Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Reviewed-by: NTomasz Figa <t.figa@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Andrzej Hajda 提交于
This patch add dts entries required for the SPI bus used for firware upload by the S5C73M3 camera. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 06 8月, 2013 8 次提交
-
-
由 Sylwester Nawrocki 提交于
This patch enables the front camera using the internal camera ISP (FIMC-IS). Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Reviewed-by: NTomasz Figa <t.figa@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Jacek Anaszewski 提交于
This patch adds AK8975 magnetometer node and corresponding i2c-gpio bus node for TRATS2 board. Signed-off-by: NJacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: NTomasz Figa <t.figa@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Sylwester Nawrocki 提交于
Add common camera node and Exynos4212/4412 specific nodes for FIMC, MIPI-CSIS, FIMC-LITE and FIMC-IS devices. Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Reviewed-by: NTomasz Figa <t.figa@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Sylwester Nawrocki 提交于
This patch adds common Exynos4 SoC series FIMC and MIPI CSIS device nodes. Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Reviewed-by: NTomasz Figa <t.figa@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Sylwester Nawrocki 提交于
The Exynos4 SPI controller has migrated to the generic DMA bindings since commit b5be04d3("spi: s3c64xx: Modify SPI driver to use generic DMA DT support"). Use the generic bindings to specify the corresponding DMA to make the SPI usable again on Exynos4x12 SoCs. Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Reviewed-by: NTomasz Figa <t.figa@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Sylwester Nawrocki 提交于
The ISP power domain is a common power domain for FIMC-LITE and FIMC-IS (camera ISP) devices. Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Reviewed-by: NTomasz Figa <t.figa@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Sylwester Nawrocki 提交于
Add pinctrl nodes for the ISP I2C0, ISP I2C1 and ISP UART devices. Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Reviewed-by: NTomasz Figa <t.figa@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Sylwester Nawrocki 提交于
Add separate nodes for the CAMCLK pin and turn off pull-up on camera ports A, B. The video bus pins and the clock output (CAMCLK) pin need separate nodes since full camera port is not used in some configurations, e.g. for MIPI CSI-2 bus only CAMCLK is required and data/clock signal use separate dedicated pins. Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Reviewed-by: NTomasz Figa <t.figa@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 31 7月, 2013 1 次提交
-
-
由 Sachin Kamat 提交于
Adds G2D node to exynos5250 DT file. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 24 7月, 2013 7 次提交
-
-
由 Amit Daniel Kachhap 提交于
This patch adds device node for TMU controller. There are 3 instances of the controllers so 3 nodes are created. Acked-by: NJonghwa Lee <jonghwa3.lee@samsung.com> Reviewed-by: NEduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: NAmit Daniel Kachhap <amit.daniel@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Tomasz Figa 提交于
This patch introduces device tree sources for Samsung Trats 2 board based on Exynos4412 SoC. Currently support includes: - eMMC, - main PMIC (max77686), - serial ports, - GPIO keys, - touchscreen. Signed-off-by: NTomasz Figa <t.figa@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
Re-ordering in alphabetical. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Mark Brown 提交于
The default audio module for the Arndale has a WM1811A on it. Add this to the device tree bindings. Signed-off-by: NMark Brown <broonie@linaro.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Mark Brown 提交于
As part of this add nodes for the main wall supply as well as bucks 7 and 8 which are used to drop that down for several of the LDOs. Signed-off-by: NMark Brown <broonie@linaro.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Mark Brown 提交于
Fixed voltage regulators (and other similar free standing things) are supposed to go on a simple-bus for DT correctness reasons. Signed-off-by: NMark Brown <broonie@linaro.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Mark Brown 提交于
The out of tree code configures a pullup on the line indicating that it is an active low interrupt. Signed-off-by: NMark Brown <broonie@linaro.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 15 7月, 2013 4 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux由 Linus Torvalds 提交于
Pull slab update from Pekka Enberg: "Highlights: - Fix for boot-time problems on some architectures due to init_lock_keys() not respecting kmalloc_caches boundaries (Christoph Lameter) - CONFIG_SLUB_CPU_PARTIAL requested by RT folks (Joonsoo Kim) - Fix for excessive slab freelist draining (Wanpeng Li) - SLUB and SLOB cleanups and fixes (various people)" I ended up editing the branch, and this avoids two commits at the end that were immediately reverted, and I instead just applied the oneliner fix in between myself. * 'slab/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux slub: Check for page NULL before doing the node_match check mm/slab: Give s_next and s_stop slab-specific names slob: Check for NULL pointer before calling ctor() slub: Make cpu partial slab support configurable slab: add kmalloc() to kernel API documentation slab: fix init_lock_keys slob: use DIV_ROUND_UP where possible slub: do not put a slab to cpu partial list when cpu_partial is 0 mm/slub: Use node_nr_slabs and node_nr_objs in get_slabinfo mm/slub: Drop unnecessary nr_partials mm/slab: Fix /proc/slabinfo unwriteable for slab mm/slab: Sharing s_next and s_stop between slab and slub mm/slab: Fix drain freelist excessively slob: Rework #ifdeffery in slab.h mm, slab: moved kmem_cache_alloc_node comment to correct place
-
由 Steven Rostedt 提交于
In the -rt kernel (mrg), we hit the following dump: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff811573f1>] kmem_cache_alloc_node+0x51/0x180 PGD a2d39067 PUD b1641067 PMD 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: sunrpc cpufreq_ondemand ipv6 tg3 joydev sg serio_raw pcspkr k8temp amd64_edac_mod edac_core i2c_piix4 e100 mii shpchp ext4 mbcache jbd2 sd_mod crc_t10dif sr_mod cdrom sata_svw ata_generic pata_acpi pata_serverworks radeon ttm drm_kms_helper drm hwmon i2c_algo_bit i2c_core dm_mirror dm_region_hash dm_log dm_mod CPU 3 Pid: 20878, comm: hackbench Not tainted 3.6.11-rt25.14.el6rt.x86_64 #1 empty empty/Tyan Transport GT24-B3992 RIP: 0010:[<ffffffff811573f1>] [<ffffffff811573f1>] kmem_cache_alloc_node+0x51/0x180 RSP: 0018:ffff8800a9b17d70 EFLAGS: 00010213 RAX: 0000000000000000 RBX: 0000000001200011 RCX: ffff8800a06d8000 RDX: 0000000004d92a03 RSI: 00000000000000d0 RDI: ffff88013b805500 RBP: ffff8800a9b17dc0 R08: ffff88023fd14d10 R09: ffffffff81041cbd R10: 00007f4e3f06e9d0 R11: 0000000000000246 R12: ffff88013b805500 R13: ffff8801ff46af40 R14: 0000000000000001 R15: 0000000000000000 FS: 00007f4e3f06e700(0000) GS:ffff88023fd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000000 CR3: 00000000a2d3a000 CR4: 00000000000007e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process hackbench (pid: 20878, threadinfo ffff8800a9b16000, task ffff8800a06d8000) Stack: ffff8800a9b17da0 ffffffff81202e08 ffff8800a9b17de0 000000d001200011 0000000001200011 0000000001200011 0000000000000000 0000000000000000 00007f4e3f06e9d0 0000000000000000 ffff8800a9b17e60 ffffffff81041cbd Call Trace: [<ffffffff81202e08>] ? current_has_perm+0x68/0x80 [<ffffffff81041cbd>] copy_process+0xdd/0x15b0 [<ffffffff810a2125>] ? rt_up_read+0x25/0x30 [<ffffffff8104369a>] do_fork+0x5a/0x360 [<ffffffff8107c66b>] ? migrate_enable+0xeb/0x220 [<ffffffff8100b068>] sys_clone+0x28/0x30 [<ffffffff81527423>] stub_clone+0x13/0x20 [<ffffffff81527152>] ? system_call_fastpath+0x16/0x1b Code: 89 fc 89 75 cc 41 89 d6 4d 8b 04 24 65 4c 03 04 25 48 ae 00 00 49 8b 50 08 4d 8b 28 49 8b 40 10 4d 85 ed 74 12 41 83 fe ff 74 27 <48> 8b 00 48 c1 e8 3a 41 39 c6 74 1b 8b 75 cc 4c 89 c9 44 89 f2 RIP [<ffffffff811573f1>] kmem_cache_alloc_node+0x51/0x180 RSP <ffff8800a9b17d70> CR2: 0000000000000000 ---[ end trace 0000000000000002 ]--- Now, this uses SLUB pretty much unmodified, but as it is the -rt kernel with CONFIG_PREEMPT_RT set, spinlocks are mutexes, although they do disable migration. But the SLUB code is relatively lockless, and the spin_locks there are raw_spin_locks (not converted to mutexes), thus I believe this bug can happen in mainline without -rt features. The -rt patch is just good at triggering mainline bugs ;-) Anyway, looking at where this crashed, it seems that the page variable can be NULL when passed to the node_match() function (which does not check if it is NULL). When this happens we get the above panic. As page is only used in slab_alloc() to check if the node matches, if it's NULL I'm assuming that we can say it doesn't and call the __slab_alloc() code. Is this a correct assumption? Acked-by: NChristoph Lameter <cl@linux.com> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org> Signed-off-by: NPekka Enberg <penberg@kernel.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull more vfs stuff from Al Viro: "O_TMPFILE ABI changes, Oleg's fput() series, misc cleanups, including making simple_lookup() usable for filesystems with non-NULL s_d_op, which allows us to get rid of quite a bit of ugliness" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: sunrpc: now we can just set ->s_d_op cgroup: we can use simple_lookup() now efivarfs: we can use simple_lookup() now make simple_lookup() usable for filesystems that set ->s_d_op configfs: don't open-code d_alloc_name() __rpc_lookup_create_exclusive: pass string instead of qstr rpc_create_*_dir: don't bother with qstr llist: llist_add() can use llist_add_batch() llist: fix/simplify llist_add() and llist_add_batch() fput: turn "list_head delayed_fput_list" into llist_head fs/file_table.c:fput(): add comment Safer ABI for O_TMPFILE
-
- 14 7月, 2013 8 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
... and use d_hash_and_lookup() instead of open-coding it, for fsck sake... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
just pass the name Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
git://cavan.codon.org.uk/platform-drivers-x86由 Linus Torvalds 提交于
Pull x86 platform driver updates from Matthew Garrett: "Nothing overly exciting here - a couple of new drivers that don't do a great deal, along with some miscellaneous fixes and a couple of small feature enablement patches" * 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86: x86 platform drivers: fix gpio leak toshiba_acpi: Add dependency on SERIO_I8042 asus-nb-wmi: set wapf=4 for ASUSTeK COMPUTER INC. 1015E/U Add trivial driver to disable Intel Smart Connect Add support driver for Intel Rapid Start Technology hp-wmi: add supports for POST code error asus-wmi: control wlan-led only if wapf == 4 drivers/platform/x86/intel_ips: Convert to module_pci_driver asus-nb-wmi: ignore ALS notification key code asus-wmi: append newline to messages x86: asus-laptop: fix invalid point access x86: msi-laptop: fix memleak amilo-rfkill: Add dependency on SERIO_I8042 dell-laptop: fix error return code in dell_init() hp-wmi: Enable hotkeys on some systems
-