Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 19 1月, 2017 1 次提交
    • T
      net: Remove usage of net_device last_rx member · 4a7c9726
      由 Tobias Klauser 提交于 
      The network stack no longer uses the last_rx member of struct net_device
since the bonding driver switched to use its own private last_rx in
commit 9f242738 ("bonding: use last_arp_rx in slave_last_rx()").

However, some drivers still (ab)use the field for their own purposes and
some driver just update it without actually using it.

Previously, there was an accompanying comment for the last_rx member
added in commit 4dc89133 ("net: add a comment on netdev->last_rx")
which asked drivers not to update is, unless really needed. However,
this commend was removed in commit f8ff080d ("bonding: remove
useless updating of slave->dev->last_rx"), so some drivers added later
on still did update last_rx.

Remove all usage of last_rx and switch three drivers (sky2, atp and
smc91c92_cs) which actually read and write it to use their own private
copy in netdev_priv.

Compile-tested with allyesconfig and allmodconfig on x86 and arm.

Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Cc: Mirko Lindner <mlindner@marvell.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: NTobias Klauser <tklauser@distanz.ch>
Acked-by: NEric Dumazet <edumazet@google.com>
Reviewed-by: NJay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      4a7c9726
  3. 14 1月, 2017 1 次提交
  5. 13 1月, 2017 3 次提交
  7. 12 1月, 2017 2 次提交
  9. 11 1月, 2017 1 次提交
  11. 09 1月, 2017 2 次提交
  13. 07 1月, 2017 2 次提交
  15. 05 1月, 2017 2 次提交
  17. 30 12月, 2016 1 次提交
  19. 20 12月, 2016 1 次提交
  21. 11 12月, 2016 1 次提交
  23. 09 12月, 2016 12 次提交
  25. 03 12月, 2016 1 次提交
    • S
      net: thunderx: Fix transmit queue timeout issue · bd3ad7d3
      由 Sunil Goutham 提交于 
      Transmit queue timeout issue is seen in two cases
- Due to a race condition btw setting stop_queue at xmit()
  and checking for stopped_queue in NAPI poll routine, at times
  transmission from a SQ comes to a halt. This is fixed
  by using barriers and also added a check for SQ free descriptors,
  incase SQ is stopped and there are only CQE_RX i.e no CQE_TX.
- Contrary to an assumption, a HW errata where HW doesn't stop transmission
  even though there are not enough CQEs available for a CQE_TX is
  not fixed in T88 pass 2.x. This results in a Qset error with
  'CQ_WR_FULL' stalling transmission. This is fixed by adjusting
  RXQ's  RED levels for CQ level such that there is always enough
  space left for CQE_TXs.
Signed-off-by: NSunil Goutham <sgoutham@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      bd3ad7d3
  27. 01 12月, 2016 9 次提交
  29. 26 11月, 2016 1 次提交