提交 b3c35973 编写于 作者: R Raghu Vatsavayi 提交者: David S. Miller

liquidio CN23XX: VF init and destroy

Adds support for VF initialization and destroy resources.
Signed-off-by: NRaghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com>
Signed-off-by: NDerek Chickles <derek.chickles@caviumnetworks.com>
Signed-off-by: NSatanand Burla <satananda.burla@caviumnetworks.com>
Signed-off-by: NFelix Manlunas <felix.manlunas@caviumnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 cf39faf5
......@@ -36,6 +36,8 @@ struct octeon_cn23xx_vf {
#define CN23XX_MAILBOX_MSGPARAM_SIZE 6
#define MAX_VF_IP_OP_PENDING_PKT_COUNT 100
void cn23xx_vf_ask_pf_to_do_flr(struct octeon_device *oct);
int cn23xx_octeon_pfvf_handshake(struct octeon_device *oct);
......
......@@ -41,6 +41,60 @@ liquidio_vf_probe(struct pci_dev *pdev, const struct pci_device_id *ent);
static void liquidio_vf_remove(struct pci_dev *pdev);
static int octeon_device_init(struct octeon_device *oct);
static int lio_wait_for_oq_pkts(struct octeon_device *oct)
{
struct octeon_device_priv *oct_priv =
(struct octeon_device_priv *)oct->priv;
int retry = MAX_VF_IP_OP_PENDING_PKT_COUNT;
int pkt_cnt = 0, pending_pkts;
int i;
do {
pending_pkts = 0;
for (i = 0; i < MAX_OCTEON_OUTPUT_QUEUES(oct); i++) {
if (!(oct->io_qmask.oq & BIT_ULL(i)))
continue;
pkt_cnt += octeon_droq_check_hw_for_pkts(oct->droq[i]);
}
if (pkt_cnt > 0) {
pending_pkts += pkt_cnt;
tasklet_schedule(&oct_priv->droq_tasklet);
}
pkt_cnt = 0;
schedule_timeout_uninterruptible(1);
} while (retry-- && pending_pkts);
return pkt_cnt;
}
/**
* \brief wait for all pending requests to complete
* @param oct Pointer to Octeon device
*
* Called during shutdown sequence
*/
static int wait_for_pending_requests(struct octeon_device *oct)
{
int i, pcount = 0;
for (i = 0; i < MAX_VF_IP_OP_PENDING_PKT_COUNT; i++) {
pcount = atomic_read(
&oct->response_list[OCTEON_ORDERED_SC_LIST]
.pending_req_count);
if (pcount)
schedule_timeout_uninterruptible(HZ / 10);
else
break;
}
if (pcount)
return 1;
return 0;
}
static const struct pci_device_id liquidio_vf_pci_tbl[] = {
{
PCI_VENDOR_ID_CAVIUM, OCTEON_CN23XX_VF_VID,
......@@ -257,6 +311,35 @@ static void octeon_destroy_resources(struct octeon_device *oct)
int i;
switch (atomic_read(&oct->status)) {
case OCT_DEV_RUNNING:
case OCT_DEV_CORE_OK:
/* No more instructions will be forwarded. */
atomic_set(&oct->status, OCT_DEV_IN_RESET);
dev_dbg(&oct->pci_dev->dev, "Device state is now %s\n",
lio_get_state_string(&oct->status));
schedule_timeout_uninterruptible(HZ / 10);
/* fallthrough */
case OCT_DEV_HOST_OK:
/* fallthrough */
case OCT_DEV_IO_QUEUES_DONE:
if (wait_for_pending_requests(oct))
dev_err(&oct->pci_dev->dev, "There were pending requests\n");
if (lio_wait_for_instr_fetch(oct))
dev_err(&oct->pci_dev->dev, "IQ had pending instructions\n");
/* Disable the input and output queues now. No more packets will
* arrive from Octeon, but we should wait for all packet
* processing to finish.
*/
oct->fn_list.disable_io_queues(oct);
if (lio_wait_for_oq_pkts(oct))
dev_err(&oct->pci_dev->dev, "OQ had pending packets\n");
case OCT_DEV_INTR_SET_DONE:
/* Disable interrupts */
oct->fn_list.disable_interrupt(oct, OCTEON_ALL_INTR);
......@@ -395,6 +478,7 @@ static int octeon_pci_os_setup(struct octeon_device *oct)
static int octeon_device_init(struct octeon_device *oct)
{
u32 rev_id;
int j;
atomic_set(&oct->status, OCT_DEV_BEGIN_STATE);
......@@ -488,6 +572,28 @@ static int octeon_device_init(struct octeon_device *oct)
atomic_set(&oct->status, OCT_DEV_INTR_SET_DONE);
/* Enable the input and output queues for this Octeon device */
if (oct->fn_list.enable_io_queues(oct)) {
dev_err(&oct->pci_dev->dev, "enabling io queues failed\n");
return 1;
}
atomic_set(&oct->status, OCT_DEV_IO_QUEUES_DONE);
atomic_set(&oct->status, OCT_DEV_HOST_OK);
/* Send Credit for Octeon Output queues. Credits are always sent after
* the output queue is enabled.
*/
for (j = 0; j < oct->num_oqs; j++)
writel(oct->droq[j]->max_count, oct->droq[j]->pkts_credit_reg);
/* Packets can start arriving on the output queues from this point. */
atomic_set(&oct->status, OCT_DEV_CORE_OK);
atomic_set(&oct->status, OCT_DEV_RUNNING);
return 0;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册