Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 18 9月, 2015 3 次提交
  3. 16 9月, 2015 2 次提交
  5. 12 9月, 2015 2 次提交
    • A
      irda: ali-ircc: Fix deadlock in ali_ircc_sir_change_speed() · e8684c88
      由 Alexey Khoroshilov 提交于 
      ali_ircc_sir_change_speed() is always called with self->lock held,
so acquiring the lock inside it leads to unavoidable deadlock.

Call graph:
ali_ircc_sir_change_speed() is called from ali_ircc_change_speed()
  ali_ircc_fir_hard_xmit() under spin_lock_irqsave(&self->lock, flags);
  ali_ircc_sir_hard_xmit() under spin_lock_irqsave(&self->lock, flags);
  ali_ircc_net_ioctl() under spin_lock_irqsave(&self->lock, flags);
  ali_ircc_dma_xmit_complete()
    ali_ircc_fir_interrupt()
      ali_ircc_interrupt() under spin_lock(&self->lock);
  ali_ircc_sir_write_wakeup()
    ali_ircc_sir_interrupt()
      ali_ircc_interrupt() under spin_lock(&self->lock);

The patch removes spin_lock/unlock from ali_ircc_sir_change_speed().

Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: NAlexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      e8684c88
    • A
      bnx2x: use ktime_get_seconds() for timestamp · a19a19de
      由 Arnd Bergmann 提交于 
      commit c48f350f "bnx2x: Add MFW dump support" added the
bnx2x_update_mfw_dump() function that reads the current time and stores
it in a 32-bit field that gets passed into a buffer in a fixed format.

This is potentially broken when the epoch overflows in 2038, and
otherwise overflows in 2106. As we're trying to avoid uses of
struct timeval for this reason, I noticed the addition of this
function, and tried to rewrite it in a way that is more explicit
about the overflow and that will keep working once we deprecate
struct timeval.

I assume that it is not possible to change the ABI any more, otherwise
we should try to use a 64-bit field for the seconds right away.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: Yuval Mintz <Yuval.Mintz@qlogic.com>
Cc: Ariel Elior <Ariel.Elior@qlogic.com>
Acked-by: NYuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      a19a19de
  7. 11 9月, 2015 4 次提交
  9. 10 9月, 2015 16 次提交
  11. 09 9月, 2015 4 次提交
    • B
      dm9000: fix a typo · 7b901873
      由 Barry Song 提交于 
      Signed-off-by: NBarry Song <Baohua.Song@csr.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      7b901873
    • F
      net: dsa: bcm_sf2: Fix ageing conditions and operation · 39797a27
      由 Florian Fainelli 提交于 
      The comparison check between cur_hw_state and hw_state is currently
invalid because cur_hw_state is right shifted by G_MISTP_SHIFT, while
hw_state is not, so we end-up comparing bits 2:0 with bits 7:5, which is
going to cause an additional aging to occur. Fix this by not shifting
cur_hw_state while reading it, but instead, mask the value with the
appropriately shitfted bitmask.

The other problem with the fast-ageing process is that we did not set
the EN_AGE_DYNAMIC bit to request the ageing to occur for dynamically
learned MAC addresses. Finally, write back 0 to the FAST_AGE_CTRL
register to avoid leaving spurious bits sets from one operation to the
other.

Fixes: 12f460f2 ("net: dsa: bcm_sf2: add HW bridging support")
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      39797a27
    • E
      usbnet: Fix a race between usbnet_stop() and the BH · fcb0bb6a
      由 Eugene Shatokhin 提交于 
      The race may happen when a device (e.g. YOTA 4G LTE Modem) is
unplugged while the system is downloading a large file from the Net.

Hardware breakpoints and Kprobes with delays were used to confirm that
the race does actually happen.

The race is on skb_queue ('next' pointer) between usbnet_stop()
and rx_complete(), which, in turn, calls usbnet_bh().

Here is a part of the call stack with the code where the changes to the
queue happen. The line numbers are for the kernel 4.1.0:

*0 __skb_unlink (skbuff.h:1517)
    prev->next = next;
*1 defer_bh (usbnet.c:430)
    spin_lock_irqsave(&list->lock, flags);
    old_state = entry->state;
    entry->state = state;
    __skb_unlink(skb, list);
    spin_unlock(&list->lock);
    spin_lock(&dev->done.lock);
    __skb_queue_tail(&dev->done, skb);
    if (dev->done.qlen == 1)
        tasklet_schedule(&dev->bh);
    spin_unlock_irqrestore(&dev->done.lock, flags);
*2 rx_complete (usbnet.c:640)
    state = defer_bh(dev, skb, &dev->rxq, state);

At the same time, the following code repeatedly checks if the queue is
empty and reads these values concurrently with the above changes:

*0  usbnet_terminate_urbs (usbnet.c:765)
    /* maybe wait for deletions to finish. */
    while (!skb_queue_empty(&dev->rxq)
        && !skb_queue_empty(&dev->txq)
        && !skb_queue_empty(&dev->done)) {
            schedule_timeout(msecs_to_jiffies(UNLINK_TIMEOUT_MS));
            set_current_state(TASK_UNINTERRUPTIBLE);
            netif_dbg(dev, ifdown, dev->net,
                  "waited for %d urb completions\n", temp);
    }
*1  usbnet_stop (usbnet.c:806)
    if (!(info->flags & FLAG_AVOID_UNLINK_URBS))
        usbnet_terminate_urbs(dev);

As a result, it is possible, for example, that the skb is removed from
dev->rxq by __skb_unlink() before the check
"!skb_queue_empty(&dev->rxq)" in usbnet_terminate_urbs() is made. It is
also possible in this case that the skb is added to dev->done queue
after "!skb_queue_empty(&dev->done)" is checked. So
usbnet_terminate_urbs() may stop waiting and return while dev->done
queue still has an item.

Locking in defer_bh() and usbnet_terminate_urbs() was revisited to avoid
this race.
Signed-off-by: NEugene Shatokhin <eugene.shatokhin@rosalab.ru>
Reviewed-by: NBjørn Mork <bjorn@mork.no>
Acked-by: NOliver Neukum <oneukum@suse.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      fcb0bb6a
    • J
      xen: Use correctly the Xen memory terminologies · 0df4f266
      由 Julien Grall 提交于 
      Based on include/xen/mm.h [1], Linux is mistakenly using MFN when GFN
is meant, I suspect this is because the first support for Xen was for
PV. This resulted in some misimplementation of helpers on ARM and
confused developers about the expected behavior.

For instance, with pfn_to_mfn, we expect to get an MFN based on the name.
Although, if we look at the implementation on x86, it's returning a GFN.

For clarity and avoid new confusion, replace any reference to mfn with
gfn in any helpers used by PV drivers. The x86 code will still keep some
reference of pfn_to_mfn which may be used by all kind of guests
No changes as been made in the hypercall field, even
though they may be invalid, in order to keep the same as the defintion
in xen repo.

Note that page_to_mfn has been renamed to xen_page_to_gfn to avoid a
name to close to the KVM function gfn_to_page.

Take also the opportunity to simplify simple construction such
as pfn_to_mfn(page_to_pfn(page)) into xen_page_to_gfn. More complex clean up
will come in follow-up patches.

[1] http://xenbits.xen.org/gitweb/?p=xen.git;a=commitdiff;h=e758ed14f390342513405dd766e874934573e6cbSigned-off-by: NJulien Grall <julien.grall@citrix.com>
Reviewed-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: NWei Liu <wei.liu2@citrix.com>
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
      0df4f266
  13. 07 9月, 2015 6 次提交
  15. 06 9月, 2015 3 次提交