提交 792aec47 编写于 作者: W Woojung.Huh@microchip.com 提交者: David S. Miller

add microchip LAN88xx phy driver

Add Microchip LAN88XX phy driver for phylib.
Signed-off-by: NWoojung Huh <woojung.huh@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 dfc50fca
......@@ -127,6 +127,11 @@ config DP83867_PHY
---help---
Currently supports the DP83867 PHY.
config MICROCHIP_PHY
tristate "Drivers for Microchip PHYs"
help
Supports the LAN88XX PHYs.
config FIXED_PHY
tristate "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
depends on PHYLIB
......
......@@ -37,3 +37,4 @@ obj-$(CONFIG_MDIO_BUS_MUX_MMIOREG) += mdio-mux-mmioreg.o
obj-$(CONFIG_MDIO_SUN4I) += mdio-sun4i.o
obj-$(CONFIG_MDIO_MOXART) += mdio-moxart.o
obj-$(CONFIG_MDIO_BCM_UNIMAC) += mdio-bcm-unimac.o
obj-$(CONFIG_MICROCHIP_PHY) += microchip.o
/*
* Copyright (C) 2015 Microchip Technology
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/mii.h>
#include <linux/ethtool.h>
#include <linux/phy.h>
#include <linux/microchipphy.h>
#define DRIVER_AUTHOR "WOOJUNG HUH <woojung.huh@microchip.com>"
#define DRIVER_DESC "Microchip LAN88XX PHY driver"
struct lan88xx_priv {
int chip_id;
int chip_rev;
__u32 wolopts;
};
static int lan88xx_phy_config_intr(struct phy_device *phydev)
{
int rc;
if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
/* unmask all source and clear them before enable */
rc = phy_write(phydev, LAN88XX_INT_MASK, 0x7FFF);
rc = phy_read(phydev, LAN88XX_INT_STS);
rc = phy_write(phydev, LAN88XX_INT_MASK,
LAN88XX_INT_MASK_MDINTPIN_EN_ |
LAN88XX_INT_MASK_LINK_CHANGE_);
} else {
rc = phy_write(phydev, LAN88XX_INT_MASK, 0);
}
return rc < 0 ? rc : 0;
}
static int lan88xx_phy_ack_interrupt(struct phy_device *phydev)
{
int rc = phy_read(phydev, LAN88XX_INT_STS);
return rc < 0 ? rc : 0;
}
int lan88xx_suspend(struct phy_device *phydev)
{
struct lan88xx_priv *priv = phydev->priv;
/* do not power down PHY when WOL is enabled */
if (!priv->wolopts)
genphy_suspend(phydev);
return 0;
}
static int lan88xx_probe(struct phy_device *phydev)
{
struct device *dev = &phydev->dev;
struct lan88xx_priv *priv;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->wolopts = 0;
/* these values can be used to identify internal PHY */
priv->chip_id = phy_read_mmd_indirect(phydev, LAN88XX_MMD3_CHIP_ID,
3, phydev->addr);
priv->chip_rev = phy_read_mmd_indirect(phydev, LAN88XX_MMD3_CHIP_REV,
3, phydev->addr);
phydev->priv = priv;
return 0;
}
static void lan88xx_remove(struct phy_device *phydev)
{
struct device *dev = &phydev->dev;
struct lan88xx_priv *priv = phydev->priv;
if (priv)
devm_kfree(dev, priv);
}
static int lan88xx_set_wol(struct phy_device *phydev,
struct ethtool_wolinfo *wol)
{
struct lan88xx_priv *priv = phydev->priv;
priv->wolopts = wol->wolopts;
return 0;
}
static struct phy_driver microchip_phy_driver[] = {
{
.phy_id = 0x0007c130,
.phy_id_mask = 0xfffffff0,
.name = "Microchip LAN88xx",
.features = (PHY_GBIT_FEATURES |
SUPPORTED_Pause | SUPPORTED_Asym_Pause),
.flags = PHY_HAS_INTERRUPT | PHY_HAS_MAGICANEG,
.probe = lan88xx_probe,
.remove = lan88xx_remove,
.config_init = genphy_config_init,
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
.ack_interrupt = lan88xx_phy_ack_interrupt,
.config_intr = lan88xx_phy_config_intr,
.suspend = lan88xx_suspend,
.resume = genphy_resume,
.set_wol = lan88xx_set_wol,
.driver = { .owner = THIS_MODULE, }
} };
module_phy_driver(microchip_phy_driver);
static struct mdio_device_id __maybe_unused microchip_tbl[] = {
{ 0x0007c130, 0xfffffff0 },
{ }
};
MODULE_DEVICE_TABLE(mdio, microchip_tbl);
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
/*
* Copyright (C) 2015 Microchip Technology
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see <http://www.gnu.org/licenses/>.
*/
#ifndef _MICROCHIPPHY_H
#define _MICROCHIPPHY_H
#define LAN88XX_INT_MASK (0x19)
#define LAN88XX_INT_MASK_MDINTPIN_EN_ (0x8000)
#define LAN88XX_INT_MASK_SPEED_CHANGE_ (0x4000)
#define LAN88XX_INT_MASK_LINK_CHANGE_ (0x2000)
#define LAN88XX_INT_MASK_FDX_CHANGE_ (0x1000)
#define LAN88XX_INT_MASK_AUTONEG_ERR_ (0x0800)
#define LAN88XX_INT_MASK_AUTONEG_DONE_ (0x0400)
#define LAN88XX_INT_MASK_POE_DETECT_ (0x0200)
#define LAN88XX_INT_MASK_SYMBOL_ERR_ (0x0100)
#define LAN88XX_INT_MASK_FAST_LINK_FAIL_ (0x0080)
#define LAN88XX_INT_MASK_WOL_EVENT_ (0x0040)
#define LAN88XX_INT_MASK_EXTENDED_INT_ (0x0020)
#define LAN88XX_INT_MASK_RESERVED_ (0x0010)
#define LAN88XX_INT_MASK_FALSE_CARRIER_ (0x0008)
#define LAN88XX_INT_MASK_LINK_SPEED_DS_ (0x0004)
#define LAN88XX_INT_MASK_MASTER_SLAVE_DONE_ (0x0002)
#define LAN88XX_INT_MASK_RX__ER_ (0x0001)
#define LAN88XX_INT_STS (0x1A)
#define LAN88XX_INT_STS_INT_ACTIVE_ (0x8000)
#define LAN88XX_INT_STS_SPEED_CHANGE_ (0x4000)
#define LAN88XX_INT_STS_LINK_CHANGE_ (0x2000)
#define LAN88XX_INT_STS_FDX_CHANGE_ (0x1000)
#define LAN88XX_INT_STS_AUTONEG_ERR_ (0x0800)
#define LAN88XX_INT_STS_AUTONEG_DONE_ (0x0400)
#define LAN88XX_INT_STS_POE_DETECT_ (0x0200)
#define LAN88XX_INT_STS_SYMBOL_ERR_ (0x0100)
#define LAN88XX_INT_STS_FAST_LINK_FAIL_ (0x0080)
#define LAN88XX_INT_STS_WOL_EVENT_ (0x0040)
#define LAN88XX_INT_STS_EXTENDED_INT_ (0x0020)
#define LAN88XX_INT_STS_RESERVED_ (0x0010)
#define LAN88XX_INT_STS_FALSE_CARRIER_ (0x0008)
#define LAN88XX_INT_STS_LINK_SPEED_DS_ (0x0004)
#define LAN88XX_INT_STS_MASTER_SLAVE_DONE_ (0x0002)
#define LAN88XX_INT_STS_RX_ER_ (0x0001)
#define LAN88XX_EXT_PAGE_ACCESS (0x1F)
#define LAN88XX_EXT_PAGE_SPACE_0 (0x0000)
#define LAN88XX_EXT_PAGE_SPACE_1 (0x0001)
#define LAN88XX_EXT_PAGE_SPACE_2 (0x0002)
/* Extended Register Page 1 space */
#define LAN88XX_EXT_MODE_CTRL (0x13)
#define LAN88XX_EXT_MODE_CTRL_MDIX_MASK_ (0x000C)
#define LAN88XX_EXT_MODE_CTRL_AUTO_MDIX_ (0x0000)
#define LAN88XX_EXT_MODE_CTRL_MDI_ (0x0008)
#define LAN88XX_EXT_MODE_CTRL_MDI_X_ (0x000C)
/* MMD 3 Registers */
#define LAN88XX_MMD3_CHIP_ID (32877)
#define LAN88XX_MMD3_CHIP_REV (32878)
#endif /* _MICROCHIPPHY_H */
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册