Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 31 3月, 2009 5 次提交
  3. 24 3月, 2009 4 次提交
  5. 21 3月, 2009 7 次提交
  7. 19 3月, 2009 1 次提交
    • F
      tracing/ring-buffer: fix non cpu hotplug case · 3bf832ce
      由 Frederic Weisbecker 提交于 
      Impact: fix warning with irqsoff tracer

The ring buffer allocates its buffers on pre-smp time (early_initcall).
It means that, at first, only the boot cpu buffer is allocated and
the ring-buffer cpumask only has the boot cpu set (cpu_online_mask).

Later, the secondary cpu will show up and the ring-buffer will be notified
about this event: the appropriate buffer will be allocated and the cpumask
will be updated.

Unfortunately, if !CONFIG_CPU_HOTPLUG, the ring-buffer will not be
notified about the secondary cpus, meaning that the cpumask will have
only the cpu boot set, and only one cpu buffer allocated.

We fix that by using cpu_possible_mask if !CONFIG_CPU_HOTPLUG.

This patch fixes the following warning with irqsoff tracer running:

[  169.317794] WARNING: at kernel/trace/trace.c:466 update_max_tr_single+0xcc/0xf3()
[  169.318002] Hardware name: AMILO Li 2727
[  169.318002] Modules linked in:
[  169.318002] Pid: 5624, comm: bash Not tainted 2.6.29-rc8-tip-02636-g6aafa6c #11
[  169.318002] Call Trace:
[  169.318002]  [<ffffffff81036182>] warn_slowpath+0xea/0x13d
[  169.318002]  [<ffffffff8100b9d6>] ? ftrace_call+0x5/0x2b
[  169.318002]  [<ffffffff8100b9d6>] ? ftrace_call+0x5/0x2b
[  169.318002]  [<ffffffff8100b9d1>] ? ftrace_call+0x0/0x2b
[  169.318002]  [<ffffffff8101ef10>] ? ftrace_modify_code+0xa9/0x108
[  169.318002]  [<ffffffff8106e27f>] ? trace_hardirqs_off+0x25/0x27
[  169.318002]  [<ffffffff8149afe7>] ? _spin_unlock_irqrestore+0x1f/0x2d
[  169.318002]  [<ffffffff81064f52>] ? ring_buffer_reset_cpu+0xf6/0xfb
[  169.318002]  [<ffffffff8106637c>] ? ring_buffer_reset+0x36/0x48
[  169.318002]  [<ffffffff8106aeda>] update_max_tr_single+0xcc/0xf3
[  169.318002]  [<ffffffff8100bc17>] ? sysret_check+0x22/0x5d
[  169.318002]  [<ffffffff8106e3ea>] stop_critical_timing+0x142/0x204
[  169.318002]  [<ffffffff8106e4cf>] trace_hardirqs_on_caller+0x23/0x25
[  169.318002]  [<ffffffff8149ac28>] trace_hardirqs_on_thunk+0x3a/0x3c
[  169.318002]  [<ffffffff8100bc17>] ? sysret_check+0x22/0x5d
[  169.318002] ---[ end trace db76cbf775a750cf ]---

Because this tracer may try to swap two cpu ring buffers for an
unregistered cpu on the ring buffer.

This patch might also fix a fair loss of traces due to unallocated buffers
for secondary cpus.
Reported-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Acked-b: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1237470453-5427-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      3bf832ce
  9. 18 3月, 2009 9 次提交
    • F
      tracing/ftrace: stop {irqs, preempt}soff tracers when tracing is stopped · 49036200
      由 Frederic Weisbecker 提交于 
      Impact: fix a selftest warning

In some cases, it's possible to see the following warning on irqsoff
tracer selftest:

[    4.640003] Testing tracer irqsoff: <4>------------[ cut here ]------------
[    4.653562] WARNING: at kernel/trace/trace.c:458 update_max_tr_single+0x9a/0xc4()
[    4.660000] Hardware name: System Product Name
[    4.660000] Modules linked in:
[    4.660000] Pid: 301, comm: kstop/1 Not tainted 2.6.29-rc8-tip #35837
[    4.660000] Call Trace:
[    4.660000]  [<4014b588>] warn_slowpath+0x79/0x8f
[    4.660000]  [<402d6949>] ? put_dec+0x64/0x6b
[    4.660000]  [<40162b56>] ? getnstimeofday+0x58/0xdd
[    4.660000]  [<40162210>] ? clocksource_read+0x3/0xf
[    4.660000]  [<4015eb44>] ? ktime_set+0x8/0x34
[    4.660000]  [<4014101a>] ? balance_runtime+0x8/0x56
[    4.660000]  [<405f6f11>] ? _spin_lock+0x3/0x10
[    4.660000]  [<4011f643>] ? ftrace_call+0x5/0x8
[    4.660000]  [<4015d0f1>] ? task_cputime_zero+0x3/0x27
[    4.660000]  [<40190ee7>] ? cpupri_set+0x90/0xcb
[    4.660000]  [<405f7208>] ? _spin_lock_irqsave+0x22/0x34
[    4.660000]  [<40190f12>] ? cpupri_set+0xbb/0xcb
[    4.660000]  [<405f7151>] ? _spin_unlock_irqrestore+0x23/0x35
[    4.660000]  [<4018493f>] ? ring_buffer_reset_cpu+0x27/0x51
[    4.660000]  [<405f7208>] ? _spin_lock_irqsave+0x22/0x34
[    4.660000]  [<40184962>] ? ring_buffer_reset_cpu+0x4a/0x51
[    4.660000]  [<405f7151>] ? _spin_unlock_irqrestore+0x23/0x35
[    4.660000]  [<4018cc29>] ? trace_hardirqs_off+0x1a/0x1c
[    4.660000]  [<405f7151>] ? _spin_unlock_irqrestore+0x23/0x35
[    4.660000]  [<40184962>] ? ring_buffer_reset_cpu+0x4a/0x51
[    4.660000]  [<401850f3>] ? cpumask_next+0x15/0x18
[    4.660000]  [<4018a41f>] update_max_tr_single+0x9a/0xc4
[    4.660000]  [<4014e5fe>] ? exit_notify+0x16/0xf2
[    4.660000]  [<4018cd13>] check_critical_timing+0xcc/0x11e
[    4.660000]  [<4014e5fe>] ? exit_notify+0x16/0xf2
[    4.660000]  [<4014e5fe>] ? exit_notify+0x16/0xf2
[    4.660000]  [<4018cdf1>] stop_critical_timing+0x8c/0x9f
[    4.660000]  [<4014e5c4>] ? forget_original_parent+0xac/0xd0
[    4.660000]  [<4018ce3a>] trace_hardirqs_on+0x1a/0x1c
[    4.660000]  [<4014e5c4>] forget_original_parent+0xac/0xd0
[    4.660000]  [<4014e5fe>] exit_notify+0x16/0xf2
[    4.660000]  [<4014e8a5>] do_exit+0x1cb/0x225
[    4.660000]  [<4015c72b>] ? kthread+0x0/0x69
[    4.660000]  [<4011f61d>] kernel_thread_helper+0xd/0x10
[    4.660000] ---[ end trace a7919e7f17c0a725 ]---
[    4.660164] .. no entries found ..FAILED!

During the selftest of irqsoff tracer, we do that:

	/* disable interrupts for a bit */
	local_irq_disable();
	udelay(100);
	local_irq_enable();
	/* stop the tracing. */
	tracing_stop();
	/* check both trace buffers */
	ret = trace_test_buffer(tr, NULL);

If a callsite performs a new max delay with irqs off just after
tracing_stop, update_max_tr_single() -> ring_buffer_swap_cpu()
will be called with the buffers disabled by tracing_stop(), hence
the warning, then ring_buffer_swap_cpu() return -EAGAIN and
update_max_tr_single() complains.

Fix it by also stopping the tracer before stopping the tracing globally.
A similar situation can happen with preemptoff and preemptirqsoff tracers
where we apply the same fix.
Reported-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1237325938-5240-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      49036200
    • C
      tracing: fix command line to pid reverse map · a635cf04
      由 Carsten Emde 提交于 
      Impact: fix command line to pid mapping

map_cmdline_to_pid[] is checked in trace_save_cmdline(), but never
updated. This results in stale pid to command line mappings and the
tracer output will associate the wrong comm string.
Signed-off-by: NCarsten Emde <Carsten.Emde@osadl.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      a635cf04
    • T
      tracing: fix trace_find_cmdline() · 50d88758
      由 Thomas Gleixner 提交于 
      Impact: prevent stale command line output

In case there is no valid command line mapping for a pid
trace_find_cmdline() returns without updating the comm buffer. The
trace dump keeps the previous entry which results in confusing trace
output:

     <idle>-0     [000]   280.702056 ....
     <idle>-23456 [000]   280.702080 ....

Update the comm buffer with "<...>" when no mapping is found.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      50d88758
    • T
      tracing: replace the crude (unsigned) -1 hackery · 2c7eea4c
      由 Thomas Gleixner 提交于 
      Impact: cleanup

The command line recorder uses (unsigned) -1 to mark non mapped
entries in the pid to command line maps. The validity check is
completely unintuitive: idx >= SAVED_CMDLINES

There is no need for such casting games. Use a constant to mark
unmapped entries and check for that constant to make the code readable
and understandable.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      2c7eea4c
    • T
      tracing: stop command line recording when tracing is disabled · 18aecd36
      由 Thomas Gleixner 提交于 
      Impact: prevent overwrite of command line entries

When the tracer is stopped the command line recording continues to
record. The check for tracing_is_on() is not sufficient here as the
ringbuffer status is not affected by setting
debug/tracing/tracing_enabled to 0. On a non idle system this can
result in the loss of the command line information for the stopped
trace, which makes the trace harder to read and analyse.

Check tracer_enabled to allow further recording.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      18aecd36
    • S
      tracing: make power tracer start/stop methods lighter weight · 62524d55
      由 Steven Rostedt 提交于 
      The start/stop methods of a tracer should be able to be executed
in all contexts. This patch converts the power tracer to do so.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
      62524d55
    • S
      tracing: make sched_switch stop/start light weight · 5fec6ddc
      由 Steven Rostedt 提交于 
      The stopping and starting of a tracer should be light weight and
be able to be called in all contexts. The sched_switch grabbed
mutexes in the start/stop functions. This patch changes it to a
simple variable, on/off.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
      5fec6ddc
    • S
      tracing: add global-clock option to provide cross CPU clock to traces · af4617bd
      由 Steven Rostedt 提交于 
      Impact: feature to allow better serialized clock

This patch adds an option called "global-clock" that will allow
the tracer to switch to a slower but more accurate (across CPUs)
clock.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
      af4617bd
    • S
      ring-buffer: add api to allow a tracer to change clock source · 37886f6a
      由 Steven Rostedt 提交于 
      This patch adds a new function called ring_buffer_set_clock that
allows a tracer to assign its own clock source to the buffer.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
      37886f6a
  11. 17 3月, 2009 4 次提交
    • T
      tracing: fix leak in event_format_read() · c269fc8c
      由 Tom Zanussi 提交于 
      Impact: fix memory leak

If event_format_read() exits early due to nonzero ppos, the
previous kmalloc doesn't get freed - might as well do the
check before the kmalloc and avoid the problem.
Signed-off-by: NTom Zanussi <tzanussi@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: =?ISO-8859-1?Q?Fr=E9d=E9ric?= Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1237270859.8033.141.camel@charm-linux>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      c269fc8c
    • S
      tracing: stop comm recording on tracing off · 6adaad14
      由 Steven Rostedt 提交于 
      Impact: fix for losing comms in trace

The command lines of tasks are cached at sched switch to not need
to record them at every trace point.  Disabling the tracing on stops
the recording of traces, but does not stop the caching of command lines.
When the tracing is off the cache may overflow and cause the tracing
to show incorrect tasks matching the PIDs.

This patch disables prevents updates to the comm cache when the ring buffer
is off.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
      6adaad14
    • S
      tracing: protect reader of cmdline output · 4ca53085
      由 Steven Rostedt 提交于 
      Impact: fix to one cause of incorrect comm outputs in trace

The spinlock only protected the creation of a comm <=> pid pair.
But it was possible that a reader could look up a pid, and get the
wrong comm because it had no locking.

This also required changing trace_find_cmdline to copy the comm cache
and not just send back a pointer to it.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
      4ca53085
    • F
      tracing/ftrace: fix the check on nopped sites · 03303549
      由 Frederic Weisbecker 提交于 
      Impact: fix a dynamic tracing failure

Recently, the function and function graph tracers failed to use dynamic
tracing after the following commit:

fa9d13cf
(ftrace: don't try to __ftrace_replace_code on !FTRACE_FL_CONVERTED rec)

The patch is right except a mistake on the check for the FTRACE_FL_CONVERTED
flag. The code patching is aborted in case of successfully nopped sites.
What we want is the opposite: ignore the callsites that haven't been nopped.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
      03303549
  13. 16 3月, 2009 7 次提交
    • F
      tracing/core: fix early free of cpumasks · 2fc1dfbe
      由 Frederic Weisbecker 提交于 
      Impact: fix crashes when tracing cpumasks

While ring-buffer allocation, the cpumasks are allocated too,
including the tracing cpumask and the per-cpu file mask handler.
But these cpumasks are freed accidentally just after.
Fix it.
Reported-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1237164303-11476-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      2fc1dfbe
    • F
      tracing/ftrace: fix double calls to tracing_start() · ac1d52d0
      由 Frederic Weisbecker 提交于 
      Impact: fix a warning during preemptirqsoff selftests

When the preemptirqsoff selftest fails, we see the following
warning:

[    6.050000] Testing tracer preemptirqsoff: .. no entries found ..
------------[ cut here ]------------
[    6.060000] WARNING: at kernel/trace/trace.c:688 tracing_start+0x67/0xd3()
[    6.060000] Modules linked in:
[    6.060000] Pid: 1, comm: swapper Tainted: G
[    6.060000] Call Trace:
[    6.060000]  [<ffffffff802460ff>] warn_slowpath+0xb1/0x100
[    6.060000]  [<ffffffff802a8f5b>] ? trace_preempt_on+0x35/0x4b
[    6.060000]  [<ffffffff802a37fb>] ? tracing_start+0x31/0xd3
[    6.060000]  [<ffffffff802a37fb>] ? tracing_start+0x31/0xd3
[    6.060000]  [<ffffffff80271e0b>] ? __lock_acquired+0xe6/0x1f2
[    6.060000]  [<ffffffff802a37fb>] ? tracing_start+0x31/0xd3
[    6.060000]  [<ffffffff802a3831>] tracing_start+0x67/0xd3
[    6.060000]  [<ffffffff802a8ace>] ? irqsoff_tracer_reset+0x2d/0x57
[    6.060000]  [<ffffffff802a4d1c>] trace_selftest_startup_preemptirqsoff+0x1c8/0x1f1
[    6.060000]  [<ffffffff802a4798>] register_tracer+0x12f/0x241
[    6.060000]  [<ffffffff810250d0>] ? init_irqsoff_tracer+0x0/0x53
[    6.060000]  [<ffffffff8102510b>] init_irqsoff_tracer+0x3b/0x53

This is because in fail case, the preemptirqsoff tracer selftest calls twice
the tracing_start() function:

int
trace_selftest_startup_preemptirqsoff(struct tracer *trace, struct trace_array *tr)
{
        if (!ret && !count) {
                printk(KERN_CONT ".. no entries found ..");
                ret = -1;
                tracing_start(); <-----
                goto out;
        }
        [...]
out:
        trace->reset(tr);
        tracing_start(); <------
        tracing_max_latency = save_max;

        return ret;
}

Since it is well handled in the out path, we don't need the conditional one.
Reported-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1237159961-7447-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      ac1d52d0
    • F
      tracing/core: fix missing mutex unlock on tracing_set_tracer() · 59f586db
      由 Frederic Weisbecker 提交于 
      Impact: fix possible locking imbalance

In case of ring buffer resize failure, tracing_set_tracer forgot to
release trace_types_lock. Fix it.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1237151439-6755-5-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      59f586db
    • F
      tracing/syscalls: select kallsysms · 0ea1c415
      由 Frederic Weisbecker 提交于 
      Syscall tracing must select kallsysms.

The arch code builds a table to find the syscall metadata by syscall
number. It needs the syscalls names resolution from the symbol table
to know which name found on the syscalls metadatas match a function
pointer from the arch sys_call_table.
Reported-by: NAndrew Morton <akpm@linux-foundation.org>
Reported-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1237151439-6755-4-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      0ea1c415
    • F
      tracing/syscalls: protect thread flag toggling from races · 5be71b61
      由 Frederic Weisbecker 提交于 
      Impact: fix syscall tracer enable/disable race

The current thread flag toggling is racy as shown in the following
scenario:

- task A is the last user of syscall tracing, it releases the
  TIF_SYSCALL_FTRACE on each tasks

- at the same time task B start syscall tracing. refcount == 0 so
  it sets up TIF_SYSCALL_FTRACE on each tasks.

The effect of the mixup is unpredictable.
So this fix adds a mutex on {start,stop}_syscall_tracing().
Reported-by: NAndrew Morton <akpm@linux-foundation.org>
Reported-by: NIngo Molnar <mingo@elte.hu>
LKML-Reference: <1237151439-6755-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      5be71b61
    • F
      tracing/syscalls: various cleanups · 64044345
      由 Frederic Weisbecker 提交于 
      Impact: cleanup

- Drop unused cpu variable
- Fix some errors on comments
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1237151439-6755-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      64044345
    • F
      tracing/syscalls: fix missing release of tracing · ac99c58c
      由 Frederic Weisbecker 提交于 
      Impact: fix 'stuck' syscall tracer

The syscall tracer uses a refcounter to enable several users
simultaneously.

But the refcounter did not behave correctly and always restored
its value to 0 after calling start_syscall_tracing(). Therefore,
stop_syscall_tracing() couldn't release correctly the tasks from
tracing.

Also the tracer forgot to reset the buffer when it is released.

Drop the pointless refcount decrement on start_syscall_tracing()
and reset the buffer when we release the tracer.

This fixes two reported issue:

- when we switch from syscall tracer to another tracer, syscall
  tracing continued.

- incorrect use of the refcount.
Reported-by: NAndrew Morton <akpm@linux-foundation.org>
Reported-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1237151439-6755-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      ac99c58c
  15. 13 3月, 2009 3 次提交
    • F
      tracing/syscalls: core infrastructure for syscalls tracing, enhancements · bed1ffca
      由 Frederic Weisbecker 提交于 
      Impact: new feature

This adds the generic support for syscalls tracing. This is
currently exploited through a devoted tracer but other tracing
engines can use it. (They just have to play with
{start,stop}_ftrace_syscalls() and use the display callbacks
unless they want to override them.)

The syscalls prototypes definitions are abused here to steal
some metadata informations:

- syscall name, param types, param names, number of params

The syscall addr is not directly saved during this definition
because we don't know if its prototype is available in the
namespace. But we don't really need it. The arch has just to
build a function able to resolve the syscall number to its
metadata struct.

The current tracer prints the syscall names, parameters names
and values (and their types optionally). Currently the value is
a raw hex but higher level values diplaying is on my TODO list.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1236955332-10133-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      bed1ffca
    • L
      ftrace: remove struct list_head from struct dyn_ftrace · e94142a6
      由 Lai Jiangshan 提交于 
      Impact: save memory

The struct dyn_ftrace table is very large, this patch will save
about 50%.
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <srostedt@redhat.com>
LKML-Reference: <49BA2C9F.8020009@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      e94142a6
    • L
      ftrace: use seq_read · 850a80cf
      由 Lai Jiangshan 提交于 
      Impact: cleanup

VFS layer has tested the file mode, we do not need test it.
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <srostedt@redhat.com>
LKML-Reference: <49BA2BAB.6010608@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      850a80cf