A logic error here results in the adapter_stopped flag only being
cleared when ixgbe_setup_fc returns an error. Correct the logic.
Signed-off-by: NMark Rustad <mark.d.rustad@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This change does two things. First, it makes it so that we always
set the relaxed ordering bits related to the DCA registers even if
DCA is not enabled. Second, it moves the configuration out of the
ixgbe_down function and into the ixgbe_configure function before
enabling the Rx and Tx rings. This ensures that DCA is configured
correctly before starting to process packets.

Thanks to Alex Duyck for this fix.

CC: Alex Duyck <aduyck@mirantis.com>
Signed-off-by: NMark Rustad <mark.d.rustad@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Add new device ID for X550EM device with SFPs.
Signed-off-by: NMark Rustad <mark.d.rustad@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch skips the PCI transactions pending check in
ixgbe_disable_pcie_master. This is done to addresses a known HW
issue where the PCI transactions pending bit sticks high when there
are pending transactions. HW engineering instructed to workaround
this issue by wait and then continue with our reset flow.
Signed-off-by: NMark Rustad <mark.d.rustad@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch sets RDRXCTL.PSP when the driver is in SRIOV mode which
enables padding of small packets.
Signed-off-by: NMark Rustad <mark.d.rustad@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Setting the X550* RDRXCTL register should fall through into X540
and 82599, not 82598.
Signed-off-by: NMark Rustad <mark.d.rustad@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

The timeout path is supposed to release the semaphore, so do that.
Signed-off-by: NMark Rustad <mark.d.rustad@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Take control of an I2C mux that selects which SFP is attached to
the I2C bus. The control of the mux is captured in the taking and
releasing of the related semaphore. Because only port 1 can control
the mux, port 1 always leaves the mux set to select port 0.
Signed-off-by: NMark Rustad <mark.d.rustad@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Reduce the frequency of polling for SFP modules. Because the
service task sometimes runs at high rates, we can poll for
SFPs too often. When an SFP is not present, the I2C timeouts
that result are very costly. So, prevent SFP polling from
being done more than once every two seconds. To reduce latency,
the poll time is cleared in a couple of cases to permit the
next service task execution to poll the SFP module.
Signed-off-by: NMark Rustad <mark.d.rustad@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Since SFP+ can be used with some X550 devices, permit them to be
detected.
Signed-off-by: NMark Rustad <mark.d.rustad@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

On some hardware platforms, the CS4227 does not initialize properly.
Detect those cases and reset it appropriately.
Signed-off-by: NMark Rustad <mark.d.rustad@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Configures the CS4227 correctly for both 1G and 10G operation,
by moving the code to ixgbe_setup_mac_link_sfp_x550em(). It
needs to be in this function because we need both the module
type and the speed, and this is the only function in the init
flow that knows the speed. In contrast,
ixgbe_setup_sfp_modules_X550em() does not know the speed, so we
can't do anything useful here. This is a fundamental difference
from the previous flow, and is due to the way the CS4227 is
implemented.
Signed-off-by: NMark Rustad <mark.d.rustad@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch adds X550EM_x SFP+ dual-speed support. 82599 fiber link
code was moved from ixgbe_82599.c to ixgbe_common.c for use by
X550EM. SFP MAC link code is added to x550EM.
Signed-off-by: NMark Rustad <mark.d.rustad@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Reduce the number of retries during PHY detection. This reduces
pauses when no SFP is present. Once an SFP is detected, the normal
retry count will be used.
Signed-off-by: NMark Rustad <mark.d.rustad@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Clear the destination location for I2C data initially so that
the received data will not be affected by previous attempts.
This could have returned wrong data in certain retry sequences.
Signed-off-by: NMark Rustad <mark.d.rustad@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In case the DaVinci Emac is directly connected to a
non-mdio PHY/device, it should be possible to provide
a fixed link configuration in the DT.
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Tested-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NShrikrishna Khare <skhare@vmware.com>
Signed-off-by: NBhavesh Davda <bhavesh@vmware.com>
Acked-by: NSrividya Murali <smurali@vmware.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates 2015-09-22

This series contains updates to e1000, e1000e, igbvf, ixgbe, ixgbevf and
fm10k.

Jacob provides several updates for fm10k, which cleans up comments and
most notably a fix for a corner case issue with the PF/VF mailbox code.
The issue being fm10k_mbx_reset_work clears various states about the
mailbox, but does not clear the Tx FIFO head/tail pointers.  We also
are not able to simply clear these pointers, as we would drop
untransmitted messages without error.  Also adds support for extra debug
statistics, which provides the ability to see what the PF thinks the
VF mailboxes look like.

Don adds support for SFP+ in X550 and support for SCTP flow director
filters SCTP mask.

Francois Romieu dusts off the e1000 driver and removes some dead calls
to e1000_init_eeprom_params().

Toshiaki Makita provides three patches to enable TSO for stacked VLAN's
on e1000e, igbvf and ixgbevf.

Mark provides the first of several ixgbe updates.  First updates the
driver to accept SFP not present error for all devices, since an SFP
can still be inserted.  Adds support for SFP insertion interrupt on
X550EM devices with SPFs.  Adds I2C combined operations on X550EM
(not X550) devices.  Moved the setting of lan_id to before any I2C
eeprom access.  Lastly, set the bit bang mode in the hardware when
performing bit banding I2C operations on X550.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Scott Feldman says:

====================
bridge: don't age out externally added FDB entries

v3: Per davem review: add del_timer_sync on rocker port remove.

v2: Per Jiri review comment: add BR_DEFAULT_AGEING_TIME to defines

Siva originally proposed skipping externally added FDB entries in the bridge's
FDB garbage collection func, and moving the ageing of externally added entries
to the port driver/device.  This broke rocker, since rocker didn't have a
hardware (or software) mechanism for ageing out its learned FDB entries.

This patchset reintroduces Siva's bridge driver patch to skip externally added
entries and adds support in rocker so rocker can age out its own entries.
Rocker does this using a software timer similar to the bridge's FDB garbage
collection timer.  Other switchdev devices/drivers can use this software timer
method or program the device to nofity aged-out entries to the driver.

Updated switchdev.txt documentation to reflect current state-of-the-art.  This
removes one more XXX todo comment in switchdev.txt.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Reviewed-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Acked-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NSiva Mannem <siva.mannem.lnx@gmail.com>
Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Acked-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Acked-by: NJiri Pirko <jiri@resnulli.us>
Acked-by: NPremkumar Jonnala <pjonnala@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a timer to each rocker switch to do FDB entry cleanup by ageing out
expired entries.  The timer scheduling algo is copied from the bridge
driver, for the most part, to keep the firing of the timer to a minimum.
Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Acked-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Follow-up patcheset will allow user to change ageing_time, but for now
just hard-code it to a fixed value (the same value used as the default
for the bridge driver).
Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Acked-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Acked-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We'll need more info from rocker_port than just pport when we age out fdb
entries, so store rocker_port rather than pport in each fdb entry.
Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Acked-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The entry is touched once when created, and touched again for each update.
The touched time is used to calculate FDB entry age.
Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Acked-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
Minor cls_bpf updates

Some minor updates resp. follow-ups on cls_bpf, please see
individual patches for details. Will follow with the iproute2
patch after this series.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jamal suggested to further limit the currently allowed subset of opcodes
that may be used by a direct action return code as the intention is not
to replace the full action engine, but rather to have a minimal set that
can be used in the fast-path on things like ingress for some features
that cls_bpf supports.

Classifiers can, of course, still be chained together that have direct
action mode with those that have a full exec pass. For more complex
scenarios that go beyond this minimal set here, the full tcf_exts_exec()
path must be used.
Suggested-by: NJamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The binding to a particular classid was so far always mandatory for
cls_bpf, but it doesn't need to be. Therefore, lift this restriction
as similarly done in other classifiers.

Only a couple of qdiscs make use of class from the tcf_result, others
don't strictly care, so let the user choose his needs (those that read
out class can handle situations where it could be NULL).

An explicit check for tcf_unbind_filter() is also not needed here, as
the previous r->class was 0, so the xchg() will return that and
therefore a callback to the qdisc's unbind_tcf() is skipped.
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In commit 43388da42a49 ("cls_bpf: introduce integrated actions") we
have added TCA_BPF_FLAGS. We can also retrieve this information from
the prog, dump it back to user space as well. It's useful in tc when
displaying/dumping filter info.

Also, remove tp from cls_bpf_prog_from_efd(), came in as a conflict
from a rebase and it's unused here (later work may add it along with
a real user).
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Michael Grzeschik says:

====================
ARCNET: refactoring and cleanup

This series cleans up the code in drivers/net/arcnet
and include/uapi/linux/if_arcnet.h . It doesn't change
the runtime behaviour of the code. Its only purpose
is to improve the code maintenance and readability.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Similarly as already the case in bpf_redirect()/skb_do_redirect()
pair, let the stack deal with devs that are !IFF_UP.

dev_forward_skb() as well as dev_queue_xmit() will free the skb
and increment drop counter internally in such cases, so we can
spare the condition in bpf_clone_redirect().
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In rt6_info_hash_nhsfn replace the custom hashing over flowi6 that is
using xor with a call to common function get_hash_from_flowi6.
Signed-off-by: NTom Herbert <tom@herbertland.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch cleans the capmode protocol module. It removes the obsolete
function arcnet_cap_init and replaces printk with pr_info.
Signed-off-by: NMichael Grzeschik <m.grzeschik@pengutronix.de>

This patch moves the module_init and module_exit patches to
the end of the file. It also replaces the printk with pr_info.
Signed-off-by: NMichael Grzeschik <m.grzeschik@pengutronix.de>

This patch replaces all magic numbers in the driver with
proper named macros. For the case of XTOcfg and STARTIOcmd
it introduces the new macros.
Signed-off-by: NMichael Grzeschik <m.grzeschik@pengutronix.de>

This patch changes the macro definitions to match the C99
formating. This improves the readability.
Signed-off-by: NMichael Grzeschik <m.grzeschik@pengutronix.de>

The word length macros are unused.  Remove them.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NMichael Grzeschik <m.grzeschik@pengutronix.de>

Deduplicate the COM9026 registers.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NMichael Grzeschik <m.grzeschik@pengutronix.de>