Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 27 6月, 2013 1 次提交
  3. 31 5月, 2013 1 次提交
  5. 28 5月, 2013 4 次提交
    • T
      pci: mvebu: enable driver usage on Kirkwood · 005625fc
      由 Thomas Petazzoni 提交于 
      We allow the pci-mvebu driver to be compiled on the Kirkwood platform,
and add the 'marvell,kirkwood-pcie' as a compatible string supported
by the driver.
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NJason Cooper <jason@lakedaemon.net>
      005625fc
    • T
      pci: mvebu: fix the emulation of the status register · 6eb237c4
      由 Thomas Petazzoni 提交于 
      The status register of the PCI configuration space of PCI-to-PCI
bridges contain some read-only bits, and so write-1-to-clear bits. So,
the Linux PCI core sometimes writes 0xffff to this status register,
and in the current PCI-to-PCI bridge emulation code of the Marvell
driver, we do take all those 1s being written. Even the read-only bits
are being overwritten.

For now, all the read-only bits should be emulated to have the zero
value.

The other bits, that are write-1-to-clear bits are used to report
various kind of errors, and are never set by the emulated bridge, so
there is no need to support this write-1-to-clear bits mechanism.

As a conclusion, the easiest solution is to simply emulate this status
register by returning zero when read, and ignore the writes to it.

This has two visible effects:

 * The devsel is no longer 'unknown' in, i.e

   Flags: bus master, 66MHz, user-definable features, ?? devsel, latency 0

   becomes:

   Flags: bus master, 66MHz, user-definable features, fast devsel, latency 0

   in lspci -v.

   This was caused by a value of 11b being read for devsel, which is
   an invalid value. This 11b value being read was due to a previous
   write of 0xffff into the status register.

 * The capability list is no longer broken, because we indicate to the
   Linux PCI core that we don't have a Capabilities Pointer in the PCI
   configuration space of this bridge. The following message is
   therefore no longer visible in lspci -v:

   Capabilities: [fc] <chain broken>
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NJason Cooper <jason@lakedaemon.net>
      6eb237c4
    • T
      pci: mvebu: allow the enumeration of devices beyond physical bridges · 197fc226
      由 Thomas Petazzoni 提交于 
      Until now, the Marvell PCIe driver was only allowing the enumeration
of the devices in the secondary bus of the emulated PCI-to-PCI
bridge. This works fine when a PCIe device is directly connected into
a PCIe slot of the Marvell board.

However, when the device connected in the PCIe slot is a physical PCIe
bridge, beyond which a real PCIe device is connected, it no longer
worked, as the driver was preventing the Linux PCI core from seeing
such devices.

This commit fixes that by ensuring that configuration transactions on
subordinate busses are properly forwarded on the right PCIe interface.

Thanks to this patch, a PCIe card beyond a PCIe bridge, itself beyond
the emulated PCI-to-PCI bridge is properly detected, with the
following layout:

-[0000:00]-+-01.0-[01]----00.0
           +-09.0-[02-07]----00.0-[03-07]--+-01.0-[04]--
           |                               +-05.0-[05]--
           |                               +-07.0-[06]--
           |                               \-09.0-[07]----00.0
           \-0a.0-[08]----00.0

Where the PCIe interface that sits beyond the emulated PCI-to-PCI
bridge at 09.0 allows to access the secondary bus 02, on which there
is a PCIe bridge that allows to access the 3 to 7 busses, that are
subordinates to this bridge. And on one of this bus (bus 7), there is
one real PCIe device connected.
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NJason Cooper <jason@lakedaemon.net>
      197fc226
    • T
      pci: mvebu: no longer fake the slot location of downstream devices · f4ac9901
      由 Thomas Petazzoni 提交于 
      By default, the Marvell hardware, for each PCIe interface, exhibits
the following devices:

 * On slot 0, a "Marvell Memory controller", identical on all PCIe
   interfaces, and which isn't useful when the Marvell SoC is the PCIe
   root complex (i.e, the normal case when we run Linux on the Marvell
   SoC).

 * On slot 1, the real PCIe card connected into the PCIe slot of the
   board.

So, what the Marvell PCIe driver was doing in its PCI-to-PCI bridge
emulation is that when the Linux PCI core was trying to access the
device in slot 0, we were in fact forwarding the configuration
transaction to the device in slot 1. For all other slots, we were
telling the Linux PCI core that there was no device connected.

However, new versions of bootloaders from Marvell change the default
PCIe configuration, and make the real device appear in slot 0, and the
"Marvell Memory controller" in slot 1.

Therefore, this commit modifies the Marvell PCIe driver to adjust the
PCIe hardware configuration to make sure that this behavior (real
device in slot 0, "Marvell Memory controller" in slot 1) is the one
we'll see regardless of what the bootloader has done. It allows to
remove the little hack that was forwarding configuration transactions
on slot 0 to slot 1, which is nice.
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NJason Cooper <jason@lakedaemon.net>
      f4ac9901
  7. 27 5月, 2013 1 次提交
  9. 21 5月, 2013 1 次提交
    • T
      pci: PCIe driver for Marvell Armada 370/XP systems · 45361a4f
      由 Thomas Petazzoni 提交于 
      This driver implements the support for the PCIe interfaces on the
Marvell Armada 370/XP ARM SoCs. In the future, it might be extended to
cover earlier families of Marvell SoCs, such as Dove, Orion and
Kirkwood.

The driver implements the hw_pci operations needed by the core ARM PCI
code to setup PCI devices and get their corresponding IRQs, and the
pci_ops operations that are used by the PCI core to read/write the
configuration space of PCI devices.

Since the PCIe interfaces of Marvell SoCs are completely separate and
not linked together in a bus, this driver sets up an emulated PCI host
bridge, with one PCI-to-PCI bridge as child for each hardware PCIe
interface.

In addition, this driver enumerates the different PCIe slots, and for
those having a device plugged in, it sets up the necessary address
decoding windows, using the mvebu-mbus driver.
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NJason Cooper <jason@lakedaemon.net>
      45361a4f
  11. 18 5月, 2013 1 次提交
  13. 08 5月, 2013 1 次提交
  15. 02 5月, 2013 2 次提交
  17. 30 4月, 2013 1 次提交
  19. 25 4月, 2013 1 次提交
  21. 23 4月, 2013 13 次提交
  23. 18 4月, 2013 4 次提交
  25. 17 4月, 2013 4 次提交
  27. 16 4月, 2013 5 次提交