pci: mvebu: allow the enumeration of devices beyond physical bridges

Until now, the Marvell PCIe driver was only allowing the enumeration
of the devices in the secondary bus of the emulated PCI-to-PCI
bridge. This works fine when a PCIe device is directly connected into
a PCIe slot of the Marvell board.

However, when the device connected in the PCIe slot is a physical PCIe
bridge, beyond which a real PCIe device is connected, it no longer
worked, as the driver was preventing the Linux PCI core from seeing
such devices.

This commit fixes that by ensuring that configuration transactions on
subordinate busses are properly forwarded on the right PCIe interface.

Thanks to this patch, a PCIe card beyond a PCIe bridge, itself beyond
the emulated PCI-to-PCI bridge is properly detected, with the
following layout:

-[0000:00]-+-01.0-[01]----00.0
           +-09.0-[02-07]----00.0-[03-07]--+-01.0-[04]--
           |                               +-05.0-[05]--
           |                               +-07.0-[06]--
           |                               \-09.0-[07]----00.0
           \-0a.0-[08]----00.0

Where the PCIe interface that sits beyond the emulated PCI-to-PCI
bridge at 09.0 allows to access the secondary bus 02, on which there
is a PCIe bridge that allows to access the 3 to 7 busses, that are
subordinates to this bridge. And on one of this bus (bus 7), there is
one real PCIe device connected.
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NJason Cooper <jason@lakedaemon.net>

drivers/pci/host/pci-mvebu.c

@@ -554,7 +554,8 @@ mvebu_pcie_find_port(struct mvebu_pcie *pcie, struct pci_bus *bus,
 		if (bus->number == 0 && port->devfn == devfn)
 			return port;
 		if (bus->number != 0 &&
-		    port->bridge.secondary_bus == bus->number)
+		    bus->number >= port->bridge.secondary_bus &&
+		    bus->number <= port->bridge.subordinate_bus)
 			return port;
 	}
 
@@ -578,7 +579,18 @@ static int mvebu_pcie_wr_conf(struct pci_bus *bus, u32 devfn,
 	if (bus->number == 0)
 		return mvebu_sw_pci_bridge_write(port, where, size, val);
 
-	if (!port->haslink || PCI_SLOT(devfn) != 0)
+	if (!port->haslink)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	/*
+	 * On the secondary bus, we don't want to expose any other
+	 * device than the device physically connected in the PCIe
+	 * slot, visible in slot 0. In slot 1, there's a special
+	 * Marvell device that only makes sense when the Armada is
+	 * used as a PCIe endpoint.
+	 */
+	if (bus->number == port->bridge.secondary_bus &&
+	    PCI_SLOT(devfn) != 0)
 		return PCIBIOS_DEVICE_NOT_FOUND;
 
 	/* Access the real PCIe interface */
@@ -609,7 +621,20 @@ static int mvebu_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
 	if (bus->number == 0)
 		return mvebu_sw_pci_bridge_read(port, where, size, val);
 
-	if (!port->haslink || PCI_SLOT(devfn) != 0) {
+	if (!port->haslink) {
+		*val = 0xffffffff;
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	}
+
+	/*
+	 * On the secondary bus, we don't want to expose any other
+	 * device than the device physically connected in the PCIe
+	 * slot, visible in slot 0. In slot 1, there's a special
+	 * Marvell device that only makes sense when the Armada is
+	 * used as a PCIe endpoint.
+	 */
+	if (bus->number == port->bridge.secondary_bus &&
+	    PCI_SLOT(devfn) != 0) {
 		*val = 0xffffffff;
 		return PCIBIOS_DEVICE_NOT_FOUND;
 	}