Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 14 4月, 2009 1 次提交
  3. 31 12月, 2008 2 次提交
  5. 25 12月, 2008 2 次提交
    • M
      [S390] Remove config options. · c185b783
      由 Martin Schwidefsky 提交于 
      On s390 we always want to run with precise cputime accounting.
Remove the config options VIRT_TIMER and VIRT_CPU_ACCOUNTING.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
      c185b783
    • A
      [S390] audit: get s390 ret_from_fork in sync with other architectures · 8f2961c3
      由 Al Viro 提交于 
      	On s390 we have ret_from_fork jump not to the "do all work we
normally do on return from syscall" as on x86, ppc, etc., but to the
"do all such work except audit".  Historical reasons - the codepath
triggered when we have AUDIT process flag set is separated from the
normall one and they converge at sysc_return, which is the common
part of post-syscall work.  And does not include calling audit_syscall_exit() -
that's done in the end of sysc_tracesys path, just before that path jumps
to sysc_return.

	IOW, the child returning from fork()/clone()/vfork() doesn't
call audit_syscall_exit() at all, so no matter what we do with its
audit context, we are not going to see the audit entry.

	The fix is simple: have ret_from_fork go to the point just past
the call of sys_.... in the 'we have AUDIT flag set' path.  There we
have (64bit variant; for 31bit the situation is the same):
sysc_tracenogo:
        tm      __TI_flags+7(%r9),(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT)
        jz      sysc_return
        la      %r2,SP_PTREGS(%r15)     # load pt_regs
        larl    %r14,sysc_return        # return point is sysc_return
        jg      do_syscall_trace_exit
which is precisely what we need - check the flag, bugger off to sysc_return
if not set, otherwise call do_syscall_trace_exit() and bugger off to
sysc_return.  r9 has just been properly set by ret_from_fork itself,
so we are fine.

	Tested on s390x, seems to work fine.  WARNING: it's been about
16 years since my last contact with 3X0 assembler[1], so additional
review would be very welcome.  I don't think I've managed to screw it
up, but...

[1] that *was* in another country and besides, the box is dead...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
      8f2961c3
  7. 27 11月, 2008 1 次提交
    • M
      [S390] fix system call parameter functions. · 59da2139
      由 Martin Schwidefsky 提交于 
      syscall_get_nr() currently returns a valid result only if the call
chain of the traced process includes do_syscall_trace_enter(). But
collect_syscall() can be called for any sleeping task, the result of
syscall_get_nr() in general is completely bogus.

To make syscall_get_nr() work for any sleeping task the traps field
in pt_regs is replace with svcnr - the system call number the process
is executing. If svcnr == 0 the process is not on a system call path.

The syscall_get_arguments and syscall_set_arguments use regs->gprs[2]
for the first system call parameter. This is incorrect since gprs[2]
may have been overwritten with the system call number if the call
chain includes do_syscall_trace_enter. Use regs->orig_gprs2 instead.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
      59da2139
  9. 15 11月, 2008 1 次提交
  11. 11 10月, 2008 1 次提交
  13. 07 5月, 2008 2 次提交
    • C
      [S390] s390-kvm: leave sie context on work. Removes preemption requirement · 0eaeafa1
      由 Christian Borntraeger 提交于 
      From: Martin Schwidefsky <schwidefsky@de.ibm.com>

This patch fixes a bug with cpu bound guest on kvm-s390. Sometimes it
was impossible to deliver a signal to a spinning guest. We used
preemption as a circumvention. The preemption notifiers called
vcpu_load, which checked for pending signals and triggered a host
intercept. But even with preemption, a sigkill was not delivered
immediately.

This patch changes the low level host interrupt handler to check for the
SIE  instruction, if TIF_WORK is set. In that case we change the
instruction pointer of the return PSW to rerun the vcpu_run loop. The kvm
code sees an intercept reason 0 if that happens. This patch adds accounting
for these types of intercept as well.

The advantages:
- works with and without preemption
- signals are delivered immediately
- much better host latencies without preemption
Acked-by: NCarsten Otte <cotte@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
      0eaeafa1
    • M
      [S390] s390: Optimize user and work TIF check · 2688905e
      由 Martin Schwidefsky 提交于 
      On return from syscall or interrupt, we have to check if we return to
userspace (likely) and if there is work todo (less likely) to decide
if we handle the work. We can optimize this check: we first check for
the less likely work case and then check for userspace.

This patch is also a preparation for an additional patch, that fixes a bug
in KVM dealing with cpu bound guests.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
      2688905e
  15. 30 4月, 2008 1 次提交
  17. 17 4月, 2008 1 次提交
    • C
      [S390] kernel: show last breaking-event-address on oops · 9e74a6b8
      由 Christian Borntraeger 提交于 
      Newer s390 models have a breaking-event-address-recording register.
Each time an instruction causes a break in the sequential instruction
execution, the address is saved in that hardware register. On a program
interrupt the address is copied to the lowcore address 272-279, which
makes it software accessible.

This patch changes the program check handler and the stack overflow
checker to copy the value into the pt_regs argument.
The oops output is enhanced to show the last known breaking address.
It might give additional information if the stack trace is corrupted.

The feature is only available on 64 bit.

The new oops output looks like:

[---------snip----------]
Modules linked in: vmcp sunrpc qeth_l2 dm_mod qeth ccwgroup
CPU: 2 Not tainted 2.6.24zlive-host #8
Process modprobe (pid: 4788, task: 00000000bf3d8718, ksp: 00000000b2b0b8e0)
Krnl PSW : 0704200180000000 000003e000020028 (vmcp_init+0x28/0xe4 [vmcp])
           R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:0 CC:2 PM:0 EA:3
Krnl GPRS: 0000000004000002 000003e000020000 0000000000000000 0000000000000001
           000000000015734c ffffffffffffffff 000003e0000b3b00 0000000000000000
           000003e00007ca30 00000000b5bb5d40 00000000b5bb5800 000003e0000b3b00
           000003e0000a2000 00000000003ecf50 00000000b2b0bd50 00000000b2b0bcb0
Krnl Code: 000003e000020018: c0c000040ff4       larl    %r12,3e0000a2000
           000003e00002001e: e3e0f0000024       stg     %r14,0(%r15)
           000003e000020024: a7f40001           brc     15,3e000020026
          >000003e000020028: e310c0100004       lg      %r1,16(%r12)
           000003e00002002e: c020000413dc       larl    %r2,3e0000a27e6
           000003e000020034: c0a00004aee6       larl    %r10,3e0000b5e00
           000003e00002003a: a7490001           lghi    %r4,1
           000003e00002003e: a75900f0           lghi    %r5,240
Call Trace:
([<000000000014b300>] blocking_notifier_call_chain+0x2c/0x40)
 [<000000000015735c>] sys_init_module+0x19d8/0x1b08
 [<0000000000110afc>] sysc_noemu+0x10/0x16
 [<000002000011cda2>] 0x2000011cda2
Last Breaking-Event-Address:
 [<000003e000020024>] vmcp_init+0x24/0xe4 [vmcp]
[---------snip----------]
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
      9e74a6b8
  19. 05 2月, 2008 1 次提交
  21. 20 11月, 2007 2 次提交
  23. 12 10月, 2007 1 次提交
  25. 27 7月, 2007 1 次提交
    • H
      [S390] Fix IRQ tracing. · b771aeac
      由 Heiko Carstens 提交于 
      If a machine check is pending and the external or I/O interrupt handler
returns to userspace io_mcck_pending is going to call s390_handle_mcck.
Before this happens a call to TRACE_IRQS_ON was already made since we
know that we are going back to userspace and hence interrupts will be
enabled. So there was an indication that interrupts are enabled while
in reality they are still disabled.
s390_handle_mcck will do a local_irq_save/restore pair and confuse
lockdep which later complains about inconsistent irq tracing.
To solve this just call trace_hardirqs_off before calling
s390_handle_mcck and trace_hardirqs_on afterwards.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
      b771aeac
  27. 10 7月, 2007 1 次提交
  29. 19 6月, 2007 1 次提交
  31. 27 4月, 2007 1 次提交
  33. 28 9月, 2006 1 次提交
  35. 20 9月, 2006 2 次提交
  37. 04 7月, 2006 1 次提交
  39. 02 7月, 2006 1 次提交
  41. 01 7月, 2006 1 次提交
  43. 29 6月, 2006 2 次提交
    • M
      [S390] remove export of sys_call_table · 8f27766a
      由 Martin Schwidefsky 提交于 
      Remove export of the sys_call_table symbol to prevent the misuse of it.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
      8f27766a
    • M
      [S390] virtual cpu accounting vs. machine checks. · 63b12246
      由 Martin Schwidefsky 提交于 
      If a machine checks interrupts the external or the i/o interrupt
handler before they have completed the cpu time calculations, the
accounting goes wrong. After the cpu returned from the machine check
handler to the interrupted interrupt handler, a negative cpu time delta
can occur.  If the accumulated cpu time in lowcore is small enough
this value can get negative as well. The next jiffy interrupt will pick
up that negative value, shift it by 12 and add the now huge positive
value to the cpu time of the process.
To solve this the machine check handler is modified not to change any
of the timestamps in the lowcore if the machine check interrupted kernel
context.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
      63b12246
  45. 02 2月, 2006 1 次提交
  47. 07 1月, 2006 1 次提交
  49. 07 11月, 2005 1 次提交
  51. 18 9月, 2005 1 次提交
  53. 10 9月, 2005 1 次提交
  55. 05 9月, 2005 2 次提交
  57. 28 7月, 2005 1 次提交
  59. 26 6月, 2005 1 次提交
  61. 17 4月, 2005 1 次提交
    • L
      Linux-2.6.12-rc2 · 1da177e4
      由 Linus Torvalds 提交于 
      Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
      1da177e4